Lsnrctl service orcl does not load
Installed 10g on vmware virtual machine running Windows 2003 Server Enterprise Edition R2
everything works initially
When working...
lsnrctl services yields:
Service "PLSExtProc" has 1 instance(s).....
Service "orcl" has 1 instance(s)....
Service "orclXDB" has 1 instance(s)....
Service "orcl_XPT" has 1 instance(s)....
all are dedicated and everything works fine...
Then out of the blue, I'll power down the machine and unexpectedly the orcl db will stop working....
When not working....
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
I can tnsping orcl successfully but the listener doesn't load it for whatever reason.
Why doesn't orcl or the other services load????
Nothing has changed....
Any suggestions or advice for how to further troubleshoot?
Edited by: DanTheMan on Jan 15, 2010 6:25 PM
listener.ora below
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_2\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = dg)(PORT = 1521))
---I realize that Oracle doesn't support VMware on db's, however VMWare publisizes that Oracle can run on a virtual machine so I don't think what I'm doing is out of the ordinary.
I tried stopping the listener and stopping the database, then starting the listener and then the database and the same problem continues. The only way I've found to fix it is to restore the virtual machine to an earlier snapshot, but after while the same problem occurs all over again.
Similar Messages
-
MBAM 2.5 Self Service Portal Does Not Load Properly
Hi Guys,
I've installed MBAM 2.5 in a LAB (no internet access) and am having issues with the Self Service Portal.
I have fixed the problem with not being able to access CDN by following the link
http://technet.microsoft.com/en-us/library/dn645350.aspx
My SSP loads the "Notice" page but when I tick agree and hit continue, the index page only displays the organisation and logged on user, but no other content.
What have I missed?
RegardsFurther investigation shows the web page throwing this error (all paths are the default, no files have been modified)
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E)
Timestamp: Mon, 12 Jan 2015 02:06:35 UTC
Message: Object expected
Line: 80
Char: 1
Code: 0
URI:
http://win-sccm.lab.local/SelfService/Scripts/SelfServiceWebsite.js
Message: Object expected
Line: 28
Char: 9
Code: 0
URI: http://win-sccm.lab.local/SelfService/Recovery/Index -
[Regression] KDE4 does not load anymore after recent kernel update.
Hi,
I have updated my system to latest packages and now KDE4 does not load. i get a Blank Screen.
I can't reach virtual terminals(I tried ALT+F1 to F11, but no response)
Control + ALT + BACKSPACE does not work.
even magic SysRq key(Alt+SysRq+REISUB) has no effect.
So I had to hard reset my machine. somehow I managed to get logs.
/var/log/Xorg.o
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 30 06:43:33 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.14 Wed May 27 01:53:56 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 185.18.14 Wed May 27 01:30:19 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "300000"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.80.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
/var/log/errors.log
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:54 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:09:04 moody kdm[4164]: X server startup timeout, terminating
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:40 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:50 moody kdm[4165]: X server startup timeout, terminating
Jul 30 06:44:15 moody kdm[4165]: X server for display :0 cannot be started, session disabled
/etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Looks like X server is not starting for some reason and this is the root cause of the problem.
Here is the list of Packages which were Updated
/var/log/pacman.log
[2009-07-25 07:36] synchronizing package lists
[2009-07-25 07:37] starting full system upgrade
[2009-07-25 10:03] synchronizing package lists
[2009-07-25 10:03] starting full system upgrade
[2009-07-25 10:07] upgraded boost (1.39.0-1 -> 1.39.0-2)
[2009-07-25 10:07] upgraded cups (1.3.10-3 -> 1.3.11-1)
[2009-07-25 10:07] upgraded device-mapper (1.02.32-2 -> 1.02.33-1)
[2009-07-25 10:07] upgraded dmapi (2.2.10-1 -> 2.2.10-2)
[2009-07-25 10:07] upgraded dri2proto (2.0-1 -> 2.1-1)
[2009-07-25 10:07] upgraded gcc-libs (4.4.0-5 -> 4.4.1-1)
[2009-07-25 10:08] upgraded gcc (4.4.0-5 -> 4.4.1-1)
[2009-07-25 10:08] upgraded hwdetect (2009.07-1 -> 2009.07-2)
[2009-07-25 10:08] upgraded kbd (1.15-1 -> 1.15-2)
[2009-07-25 10:08] >>> Updating module dependencies. Please wait ...
[2009-07-25 10:08] >>> MKINITCPIO SETUP
[2009-07-25 10:08] >>> ----------------
[2009-07-25 10:08] >>> If you use LVM2, Encrypted root or software RAID,
[2009-07-25 10:08] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-07-25 10:08] >>> More information about mkinitcpio setup can be found here:
[2009-07-25 10:08] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-07-25 10:08]
[2009-07-25 10:08] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-07-25 10:08] ==> Building image "default"
[2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-07-25 10:08] :: Begin build
[2009-07-25 10:08] :: Parsing hook [base]
[2009-07-25 10:08] :: Parsing hook [udev]
[2009-07-25 10:08] :: Parsing hook [autodetect]
[2009-07-25 10:08] :: Parsing hook [ide]
[2009-07-25 10:08] :: Parsing hook [scsi]
[2009-07-25 10:08] :: Parsing hook [sata]
[2009-07-25 10:08] :: Parsing hook [usb]
[2009-07-25 10:08] :: Parsing hook [usbinput]
[2009-07-25 10:08] :: Parsing hook [keymap]
[2009-07-25 10:08] :: Parsing hook [filesystems]
[2009-07-25 10:08] :: Generating module dependencies
[2009-07-25 10:08] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-07-25 10:08] ==> SUCCESS
[2009-07-25 10:08] ==> Building image "fallback"
[2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-07-25 10:08] :: Begin build
[2009-07-25 10:08] :: Parsing hook [base]
[2009-07-25 10:09] :: Parsing hook [udev]
[2009-07-25 10:09] :: Parsing hook [ide]
[2009-07-25 10:09] :: Parsing hook [scsi]
[2009-07-25 10:09] :: Parsing hook [sata]
[2009-07-25 10:09] :: Parsing hook [usb]
[2009-07-25 10:09] :: Parsing hook [usbinput]
[2009-07-25 10:09] :: Parsing hook [keymap]
[2009-07-25 10:09] :: Parsing hook [filesystems]
[2009-07-25 10:10] :: Generating module dependencies
[2009-07-25 10:10] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-07-25 10:10] ==> SUCCESS
[2009-07-25 10:10] upgraded kernel26 (2.6.30.1-1 -> 2.6.30.2-1)
[2009-07-25 10:10] upgraded lib32-libgl (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded lib32-libpng (1.2.37-1 -> 1.2.38-1)
[2009-07-25 10:10] upgraded lib32-mesa (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded lib32-pango (1.24.4-2 -> 1.24.5-1)
[2009-07-25 10:10] upgraded libtool (2.2.6a-2 -> 2.2.6a-3)
[2009-07-25 10:10] upgraded libv4l (0.5.99-1 -> 0.6.0-1)
[2009-07-25 10:10] upgraded lvm2 (2.02.47-2 -> 2.02.48-1)
[2009-07-25 10:10] upgraded mesa (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded pango (1.24.4-2 -> 1.24.5-1)
[2009-07-25 10:10] upgraded perl-html-parser (3.60-1 -> 3.61-1)
[2009-07-25 10:10] upgraded perl-libwww (5.825-1 -> 5.829-1)
[2009-07-25 10:10] upgraded qtcurve-gtk2 (0.65.3-1 -> 0.66.0-1)
[2009-07-25 10:10] upgraded qtcurve-kde4 (0.65.4-1 -> 0.66.1-1)
[2009-07-25 10:10] upgraded smplayer (0.6.7-1 -> 0.6.8-1)
[2009-07-25 10:10] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
System Config:
AMD Athlon 64 3000+
Archlinux 2.6.30.2 X86_64
KDE 4.2 Unstable
Nvidia Geforce 6200 Video card
please tell me how to get my desktop back.:)
Last edited by cool (2009-07-30 17:06:32)Installed the nvidia-beta driver from AUR. version:190.18. it crashed on me.
[code]____________________________________________
Start of NVIDIA bug report log file. Please include this file
when reporting a graphics driver bug via the nV News NVIDIA
Linux forum (see www.nvnews.net) or by sending email to
'[email protected]'.
nvidia-bug-report.sh Version: 3969188
Date: Sat Aug 1 18:50:38 PDT 2009
uname: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64 AMD Athlon(tm) 64 Processor 3000+ AuthenticAMD GNU/Linux
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 18:30:08 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AllowEmptyInput" "off"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.18 Wed Jul 22 16:35:50 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 190.18 Wed Jul 22 15:47:48 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "300000"
(**) Aug 01 18:30:10 NVIDIA(0): Enabling RENDER acceleration
(II) Aug 01 18:30:10 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Aug 01 18:30:10 NVIDIA(0): enabled.
(II) Aug 01 18:30:12 NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
(--) Aug 01 18:30:12 NVIDIA(0): Memory: 131072 kBytes
(--) Aug 01 18:30:12 NVIDIA(0): VideoBIOS: 05.43.02.80.00
(II) Aug 01 18:30:12 NVIDIA(0): Detected AGP rate: 8X
(--) Aug 01 18:30:12 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Aug 01 18:30:12 NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) Aug 01 18:30:12 NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) Aug 01 18:30:12 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
(II) Aug 01 18:30:12 NVIDIA(0): Assigned Display Device: CRT-0
(II) Aug 01 18:30:12 NVIDIA(0): Validated modes:
(II) Aug 01 18:30:12 NVIDIA(0): "1280x1024+0+0"
(II) Aug 01 18:30:12 NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) Aug 01 18:30:12 NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
(--) Aug 01 18:30:12 NVIDIA(0): option
(==) Aug 01 18:30:12 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Aug 01 18:30:12 NVIDIA(0): Failed to allocate GLX video capture device array.
(II) Aug 01 18:30:12 NVIDIA(0): Initialized AGP GART.
(II) Aug 01 18:30:12 NVIDIA(0): Setting mode "1280x1024+0+0"
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x26) [0x4ee2e6]
1: /usr/bin/X(xf86SigHandler+0x6f) [0x47b1cf]
2: /lib/libc.so.6 [0x7f4b2a26cf90]
3: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000988X+0x23) [0x7f4b27067893]
4: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2702f988]
5: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv001911X+0x2e) [0x7f4b2707975e]
6: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b27075814]
7: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv002497X+0xaa) [0x7f4b27075faa]
8: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000979X+0x19d) [0x7f4b270503fd]
9: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2704cf69]
10: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272a9d88]
11: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272aa53e]
12: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2729b0bc]
13: /usr/bin/X(AddScreen+0x1d4) [0x433114]
14: /usr/bin/X(InitOutput+0x76f) [0x46e12f]
15: /usr/bin/X(main+0x1fe) [0x43381e]
16: /lib/libc.so.6(__libc_start_main+0xfd) [0x7f4b2a2599ed]
17: /usr/bin/X [0x432e59]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
/etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
Option "AllowEmptyInput" "off"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
ldd /usr/bin/glxinfo
linux-vdso.so.1 => (0x00007fff7bdff000)
libGL.so.1 => /usr/lib/libGL.so.1 (0x00007f02ea6dc000)
libm.so.6 => /lib/libm.so.6 (0x00007f02ea45a000)
libc.so.6 => /lib/libc.so.6 (0x00007f02ea107000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f02e9dcc000)
libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0x00007f02e89a2000)
libnvidia-tls.so.1 => /usr/lib/libnvidia-tls.so.1 (0x00007f02ea9b8000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f02e8790000)
libdl.so.2 => /lib/libdl.so.2 (0x00007f02e858c000)
/lib/ld-linux-x86-64.so.2 (0x00007f02ea8cb000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f02e8370000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f02e816e000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f02e7f69000)
/usr/sbin/lspci -d "10de:*" -v -xxx
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6200] (rev a2) (prog-if 00 [VGA controller])
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
00: de 10 f3 00 07 00 b0 02 a2 00 00 03 00 f8 00 00
10: 00 00 00 f8 08 00 00 e0 00 00 00 f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 05 01
40: 00 00 00 00 02 00 30 00 1b 0e 00 ff 02 03 00 1f
50: 00 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 80 00 00 01 04 40 c1 00 00 00 00
a0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/usr/sbin/lspci -t
-[0000:00]-+-00.0
+-00.1
+-00.2
+-00.3
+-00.4
+-00.7
+-01.0-[0000:01]----00.0
+-0f.0
+-0f.1
+-10.0
+-10.1
+-10.2
+-10.3
+-10.4
+-11.0
+-11.5
+-12.0
+-18.0
+-18.1
+-18.2
\-18.3
/usr/sbin/dmidecode
# dmidecode 2.10
SMBIOS 2.3 present.
33 structures occupying 998 bytes.
Table at 0x000F0800.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 06/01/2005
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-7142
Version: 1.00
Serial Number:
UUID: Not Present
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-7142
Version: 1.00
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket 754
Type: Central Processor
Family: Athlon 64
Manufacturer: AMD
ID: C0 0F 00 00 FF FB 8B 07
Signature: Family 15, Model 12, Stepping 0
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
Version: AMD Athlon(tm) 64 Processor 3000+
Voltage: 1.5 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Socket 754
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
Standard
DIMM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities: None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: None
Current Speed: 5 ns
Type: Unknown EDO
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: 5 ns
Type: Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB
Handle 0x0013, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0014, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0015, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0016, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0017, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: In Use
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x0018, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0019, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x001A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001C, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0019
Partition Width: 0
Handle 0x001D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x001A
Memory Array Mapped Address Handle: 0x001C
Partition Row Position: 1
Handle 0x001E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x001B
Memory Array Mapped Address Handle: 0x001C
Partition Row Position: 1
Handle 0x001F, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0020, DMI type 127, 4 bytes
End Of Table
/sbin/modinfo nvidia | grep vermagic
vermagic: 2.6.30-ARCH SMP preempt mod_unload
Scanning kernel log files for NVRM messages:
/var/log/messages is not readable
/var/log/kernel.log:
Aug 1 17:43:55 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009
Aug 1 18:26:08 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
Aug 1 18:26:08 moody kernel: NVRM: this kernel module has the version 185.18.14. Please
Aug 1 18:26:08 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
Aug 1 18:26:08 moody kernel: NVRM: components have the same version.
Aug 1 18:27:04 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
Aug 1 18:27:04 moody kernel: NVRM: this kernel module has the version 185.18.14. Please
Aug 1 18:27:04 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
Aug 1 18:27:04 moody kernel: NVRM: components have the same version.
Aug 1 18:29:30 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18 Wed Jul 22 15:36:09 PDT 2009
Aug 1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
Aug 1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
dmesg:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009
Command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3fff0 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-CFFFF uncachable
D0000-D7FFF write-back
D8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 base 00F0000000 mask FFF8000000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f400 (usable)
modified: 000000000009f400 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003fff0000 (usable)
modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
modified: 000000003fff3000 - 0000000040000000 (ACPI data)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffff0000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000003fff0000
0000000000 - 003fe00000 page 2M
003fe00000 - 003fff0000 page 4k
kernel direct mapping tables up to 3fff0000 @ 10000-13000
RAMDISK: 37f00000 - 37fefc8d
ACPI: RSDP 00000000000f6b80 00014 (v00 VIAK8M)
ACPI: RSDT 000000003fff3040 0002C (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000003fff30c0 00074 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000003fff3180 04D34 (v01 VIAK8M AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 000000003fff0000 00040
ACPI: APIC 000000003fff7f00 0005A (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 003fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000082c0d0] TEXT DATA BSS ==> [0000200000 - 000082c0d0]
#3 [0037f00000 - 0037fefc8d] RAMDISK ==> [0037f00000 - 0037fefc8d]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [000082d000 - 000082d0b6] BRK ==> [000082d000 - 000082d0b6]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
found SMP MP-table at [ffff8800000f4b80] f4b80
[ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
DMA zone: 56 pages used for memmap
DMA zone: 1680 pages reserved
DMA zone: 2247 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254504 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff88000100a000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256751
Kernel command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
Initializing CPU#0
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 1999.604 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ f0000000 old size 32 MB
Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
Node 0: aperture @ f0000000 size 128 MB
Memory: 1024112k/1048512k available (3409k kernel code, 452k absent, 23372k reserved, 1239k data, 460k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.84 BogoMIPS (lpj=6665346)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 0000000000
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Brought up 1 CPUs
Total of 1 processors activated (4000.84 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 1888 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, ff70ffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [40000000, fcffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning (dsobject-0502): Package List length (6) larger than NumElements count (3), truncated
[20090320]
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: reg 10 io port: [0xe000-0xe007]
pci 0000:00:0f.0: reg 14 io port: [0xe100-0xe103]
pci 0000:00:0f.0: reg 18 io port: [0xe200-0xe207]
pci 0000:00:0f.0: reg 1c io port: [0xe300-0xe303]
pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]
pci 0000:00:0f.0: reg 24 io port: [0xe500-0xe5ff]
pci 0000:00:0f.1: reg 20 io port: [0xe600-0xe60f]
pci 0000:00:10.0: reg 20 io port: [0xe700-0xe71f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0xe900-0xe91f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0xea00-0xea1f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xfb000000-0xfb0000ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: reg 10 io port: [0xeb00-0xebff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: reg 10 io port: [0xec00-0xecff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xfb001000-0xfb0010ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xf9000000-0xf9ffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfaffffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 0: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0xdcc00-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0x100000-0x3ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
system 00:02: ioport range 0x4000-0x407f has been reserved
system 00:02: ioport range 0x5000-0x500f has been reserved
system 00:03: ioport range 0xb78-0xb7b has been reserved
system 00:03: ioport range 0xf78-0xf7b has been reserved
system 00:03: ioport range 0xa78-0xa7b has been reserved
system 00:03: ioport range 0xe78-0xe7b has been reserved
system 00:03: ioport range 0xbbc-0xbbf has been reserved
system 00:03: ioport range 0xfbc-0xfbf has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x290-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xf8000000-0xfaffffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfaffffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 959k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1249151352.183:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 2003
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 460k freed
Uniform Multi-Platform E-IDE driver
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
VIA_IDE 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe600-0xe607
ide1: BM-DMA at 0xe608-0xe60f
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
Probing IDE interface ide1...
hdc: BENQ DVD DD DW1650, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 3.00 loaded.
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 20
ata2: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ide-cd driver 5.00
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfb000000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e700
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e900
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ea00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
udev: starting version 141
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine: Broken BIOS detected, avoid_D3 enabled.
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1ec00, 00:11:09:06:18:c6, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa02a36a0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.2 (interface 0x000e0000).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0447ec0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
processor ACPI_CPU:00: registered -
Application does not load correctly when deploying to standalone server
All,
I have created simple application implementing fusion theme. Applicaiton works fine when I run on integrated server but when deployed on standalone server it does not load any images or the theme itself. afrloop keep incrementing in status bar and ends up with java script error while later.
I deployed another test application on standalone server and that works fine i.e. theme gets loaded correctly. Also, how should I include images on the page? I have a images folder in web content folder but they dont get loaded.
Any help will be appreciated.
Thanks,
DipalLabVIEW now uses the Microsoft installer. It's possible that you need to upgrade the version that's on the Win2K box. I think the latest service packs from Microsoft include it.
-
Select Insert into staging table does not load varchar2
I have a select insert query that loads a prebuilt table. I am running this query through Heterogenous services which points to a MySql database.
If I run just a select query in SQL PLUS then it returns all rows just fine.
However, when I put the select insert into a stored procedure, compile it, then run it. It does not load any VARCHAR2 datatypes but it does load DATE and NUMBER datatypes.
I also have another table with VARCHAR2 and it loads fine.
How can the database only load some of the items in a row and not others (VARCHAR2)
For instance, the query will load TRANSACTION_ID, ORER_NUMBER but will not load any data into BILLFIRST_NAME, and their is data to load.
CREATE TABLE "TRAN_STG"
( "TRANSACTION_ID" NUMBER(11,0),
"ORDER_NUMBER" NUMBER(20,0),
"BILL_FIRST_NAME" VARCHAR2(100 BYTE),
Any suggestions would be appreciated.can it be that there are differences in characterset? Can it be that there are differences in datatypes? Can it be that there are differences in field length?
-
Had problems with having the serial number acknowledged by the Photoshop Elements 12 (Organiser worked fine but Editor wouldn't open).
Chat support suggested I delete and reinstall program from an Adobe website download link. Have done that and now have slightly different problem.
Organiser still works fine but Editor asks for ADOBE ID which I enter but editor program does not load.
ADOBE website clearly confirms the product is registered against my ID.
Chat support now saying that they no longer provide support for PE12 Editor - only 13!
This is in direct conflict with the support advertised in the product's "Getting Started" brochure.
Only purchased PE 12 a couple of months ago (just prior to PE13 release) - find that this is pretty poor service.Sandeep,
Thank you for your advice, but this is way too involved for me. Please forgive me, but I do not feel comfortable doing this on my own. I really need a live chat or phone help!
I just uninstalled PSE 12 through control panel and yet in Windows Explorer I see it listed under the Program Files (x86)/Adobe. Photoshop Elements 8.0 is also in that directory. I have been trying to uninstall PSE 8 but keep getting error 1316. To further complicate the situation when I tried to reinstall PSE 12 yesterday I got a message that I needed to create a new folder. So I have Program Files (x86)/Elements 12 Organizer now even though I just uninstalled PSE 12.
I am so confused and frustrated! I have wasted 3 days trying to resolve this. PSE 12 was working great until a few days ago. I do have a backup of my catalog on an external hard drive. I just need to talk to someone on the phone or a live chat. -
Version 12 does not load. ver 11 works ok. what's wrong??
I have xp. do not have service packs.
newest version 12 does not load, but instead reverts back to ver 11.
What's wrong?? Can i disable ver 12 from loading everytime i load firefox?thanks for the reply.
the integration manager would be helpful if the installation of the "Crystal Reports Basic 2008 for SAP Business One" (version 12)
would install all required dll's, but its not...
I think maybe I was not clear enough, I will try to explain better:
the problem is that after the installation, I don't see the required dll's in VB6 references and components.
I need to add reference to the CRVIEWER.dll and add the designer craxdui.dll and several more files that are not installed in that version of crystal and I don't know why...?
these files ARE installed fine in "Crystal reports XI developer edition" (ver 11.5), so I can add and edit crystal files inside VB6. the problem is I need them in version 12...
Thanks -
10.2.8 Finder does not load after getting into OS X
I am pretty sure this happened to a lot of people, as I have read many many messages on this issue.
My computer is a Powerbook 867 with 128built in DDR and 512 added.
40Gb internal HDD and a 40GB firewire 3G ipod (the old 3G).
Here's the problem:
Last night just when I finishsed watching some divx on VLC running on 10.2.8, I quitted VLC using apple+Q, then closed the finder window i opened with apple+W. They both closed, but then the finder just did not respond (or have quitted). There isn't a little triangle below my finder icon on the dock. Everything else on the dock works perfectly fine. Desktop icons have disappeared.
Now I have restarted, nothing helps; went on apple discussion and found some "HELPFUL" solutions - deleting the finder preferences. First how was I suppose to delete it? ok... I installed a 10.2.3 on my ipod and boot it through there, also did a repair permission on my internal HDD. Finally deleted the com.apple.finder.plist.. So I booted up using my internal again. But still... finder DOES NOT LOAD after I got into my OS X.
Please if anyone can give me a solution to this problem!
P.S. the finder on my ipod is working fine. AND I do not want to reinstall OS X on my interal because I only did it last week after it went to service after a HDD fail (it has been replaced).
Powerbook 867Mhz 128+512MbDDR Mac OS X (10.2.x) 10.2.8Check System Preferences - Accounts
Choose you account - login items: If iTunesHelper
shows up - remove it it will prevent re-installation.
It did not have iTunes in the list, just mail and iCal alarm. Deadlines and emails are vital in my home office.
Now that I think about it, adding Mail to the list was the only thing that I had changed to the computer when this happened, but I can't imagine how that would alter permission to install on the OS.
Eric
Note: I saw a G5 1.2 for $1,500 CAN. I was tempted. -
[solved] Module bbswitch does not load, cannot disable nvidia
Hey!
According to the title I'm unable to load the bbswitch module on load with it's given parameters. I do it the way suggest in the Arch Wiki.
I'm using linux-ck
local/linux-ck-corex 3.5.6-1 (ck-corex)
local/linux-ck-corex-headers 3.5.6-1 (ck-corex)
local/nvidia-ck-corex 304.51-2 (ck-corex)
(I heard theat graysky said that there are no problems)
My /etc/modprobe.d/bbswitch.conf looks like
options bbswitch load_state=0 unload_state=0
dmesg|tail -10 outputs:
[ 121.351475] bbswitch: version 0.4.2
[ 121.351486] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 121.351497] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG1.GFX0
[ 121.351647] bbswitch: detected an Optimus _DSM function
[ 121.351656] bbswitch: device 0000:01:00.0 is in use by driver 'nvidia', refusing OFF
[ 121.351659] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 135.236590] bbswitch: disabling discrete graphics
[ 135.236977] bbswitch: Result of Optimus _DSM call: 01000058
[ 135.250144] pci 0000:01:00.0: >Refused to change power state, currently in D0
[ 135.343414] pci 0000:01:00.0: >power state changed by ACPI to D3
Any suggestions? Am I missing something? I'm thinking of adding bbswitch into modules-load.d and add the parameters as kernel parameters in grub but I'm not happy with that solution…
even if it's the "cleaner" version, imho.
Cheers!
Help is appreciated, thanks. :-)
Edit: If I load bbswitch manually, I have to restart bumblebee to turn the graphics off. I cannot disable the card via bbswitch suggested in bbswitch git repo with command: tee /proc/acpi/bbswitch <<<OFF.
Tried via modules-load.d now and grub boot parameters. The module is loaded but the card is turned on…
$domac.vex dmesg |tail -10
[ 35.421363] atl1c 0000:05:00.0: >irq 55 for MSI/MSI-X
[ 35.433604] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.766411] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[ 36.773765] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[ 107.303982] Bluetooth: Core ver 2.16
[ 107.304005] NET: Registered protocol family 31
[ 107.304007] Bluetooth: HCI device and connection manager initialized
[ 107.304009] Bluetooth: HCI socket layer initialized
[ 107.304011] Bluetooth: L2CAP socket layer initialized
[ 107.304016] Bluetooth: SCO socket layer initialized
Added my bumblebee.conf _here_.
Last edited by domac (2012-10-10 15:28:04)Hey Lekensteyn! First of all, thanks for your answer. :-)
I disabled the nvidia module now. My /etc/modprobe.d now looks like
/etc/modprobe.d
total 20K
drwxr-xr-x 2 root root 4.0K Oct 9 19:32 .
drwxr-xr-x 76 root root 4.0K Oct 9 12:49 ..
-rw-r--r-- 1 root root 45 Oct 9 19:32 bbswitch.conf
-rw-r--r-- 1 root root 18 Aug 8 20:08 nouveau_blacklist.conf
-rw-r--r-- 1 root root 17 Oct 9 12:23 nvidia_blacklist.conf
nvidia_blacklist.conf:
blacklist nvidia
nouveau_blacklist.conf:
blacklist nouveau
bbswitch.conf:
options bbswitch load_state=0 unload_state=0
There is only one more problem left… the bbswitch module does not load on startup. If I # modprobe bbswitch manually the nvidia card is turned off and it also seems the bumblebeed daemon is not started… I have no idea why. It worked with that setup all the time… not much has changed… imho nothing.
Are there any logs I could post or what can I do to eventually fix this problem.
Thanks for the help in advance!
EDIT: I can start the bumblebeed.service manually. + Why are the modules from modprobe.d not loaded? My mkinitcpio.conf.
EDIT2: Found it why bbswitch module wasn't loaded… http://comments.gmane.org/gmane.linux.a … eral/44986… testing this one right now.
Last edited by domac (2012-10-09 17:54:04) -
Firefox 33.1 does not load Adobe Flash Player 15.0.0.223
As far as I can determine, Firefox 33.1 does not load Adobe Flash Player 15.0.0.223 (identified on the Plug-ins list as "Shockwave Flash 15.0.0.223") when I access most of the pages on the MSN website. Whether it will display any specific video is unpredictable but it displays about one out of five.
If I place the mouse cursor on the blank black video display area (for which no controls or buttons are displayed), and click the right mouse button, then either (1) the context menu is the same as for clicking the mouse cursor on an empty part of the page, or (2) the context menu is not displayed at all.
Apparently, Firefox has failed to load the plug-in, but does not display any error message. Neither is there any error message displayed by the plug-in.
If you think I am willing to undertake a trial-and-error odyssey through various "do this and see what happens" recommendations in "Knowledge Base" articles and the like, then think again. I don't have the time to make the effort, and I will use Internet Exporer instead. It ought to work with MSN just fine. :-)
Since I did not develop Firefox, this is not my problem to solve. It's your software, not mine, and I didn't make the mistakes, so you fix it.
By the way:
Either Firefox Help does not display the version correctly, or your Troubleshooter doesn't obtain the data correctly. Help says version 33.1 and Troubleshooter says 33.0. YES I KNOW THAT FIREFOX 33.1.1 IS AVAILABLE. SO WHAT?
Troubleshooter also identifies the Shockwave Flash plug-in as "15.0 r0" but the native Add-ons feature identifies it as 15.0.0.223 -- which is the version that Adobe uses.
The last line of the Troubleshooter's "educated guesses" just has "* 5.1.30514.0". I have no idea as to what that refers to and I doubt that anyone else would have one either.
Well, maybe those numbers are good enough for "educated guessers" but in my experience computers do not make "educated guesses" even if software developers do.
Enjoy!Please refrain from posting scattergun boilerplate suggestions.
Please post specific instructions that will resolve the problem. If you don't know why the problem occurs and how to remedy the problem, then don't bother.
Realize that the problem did not occur with the previous version of Adobe Flash Player, but began after it was updated to 15.0.0.223. So it is is apparently specific to that version, and it may reflect a flaw in Adobe Flash Player. There's no way to actually report it to Adobe. Posting a report in their "user forum" just produces replies like the one that you have posted in reply to my OP, so what is the use?
Evidently you presume that Firefox does not have a bug, that something else doesn't work and you may be right. However, if Firefox does have a bug, then nothing that you have posted will correct it, and experimenting according to your boilerplate will be nothing but a waste of time and effort.
Again, the problem is not that Adobe Flash Player 15.0.0.223 does not run, but that it does not run when I attempt to view most of the videos on MSN. It does display videos from YouTube and other websites with an occasional specific exception. If the failure occured on more websites, and with all MSN videos, then maybe your suggestions for investigating it would have more merit.
For what it is worth: the problem occurs in Firefox Safe Mode and without Firefox Safe Mode. Disabling or enabling any extensions or other plug-ins has no effect.
I established that while investigating why Firefox 33.1 started producing crash reports every time that it initially displayed the New Tab page when I visited MSN (Firefox 32 did not do that). I also checked whether the actions that I took to troubleshoot that behavior affected Adobe Flash Player on MSN. They didn't.
Apparently the crash reports occured because Firefox could not find or could not load the "thumbnail" images for website pages that I had previously seen (they are often deleted by ''CCleaner''). The crash reports stopped after I made a couple of changes to the configuration for the ''SandboxIE'' sandbox in which I run Firefox.
Frankly, Firefox "Safe Mode" is something I don't need, because I run Firefox in a ''SandboxIE'' sandbox, which is a much more comprehensive security measure than anything implemented by any specific application. At the moment I don't recall whether Firefox Safe Mode is enabled, although I probaby re-enabled it after disabling it during the crash-report investigation. But it didn't make any difference with regard to Adobe Flash Player in that context, so there's no reason to repeat it. -
IE 11 Does not load pages and "Stops Responding" After 11/26/2013 Windows Update
I have Windows 7 Pro 64 bit. IE 11. (Doesn't matter if I try to open 32 or 64 bit IE)
I keep Automatic Updates on and they install as soon as they are available.
Everything on my PC was running fine 11/25/13.
I came to it 11/26/13 after Windows Updates ran and now whenever I open any webpages, it does not load the web page 100%, no hyperlinks can be clicked on and once you attempt to click on anything. I get the "IE 11 has stopped responding" bubble.
It also seemed to affect Firefox which does not completely load pages either.
Any shove in the correct way to help solve this would be helpful.Robert -
Anyone who has gathered over 13,000 points is certainly to be respected as being super smart and uber helpful. However, your response is inadequate on two counts.
First, "stopped working" is not an inexact phrase, nor is it a euphemism trotted out by a newbie who hasn't the skill to describe the problem accurately. "stopped working" is an exact part of the error message issued by Windows. Of course it would
help if Windows would issue error messages that are more useful, but that is a different issue. For the purposes of this discussion, "stopped working" as part of the exact error message is a useful piece of information.
Second, despite your excellent suggestions for hunting down the problem, I'm guessing that few people here have the time or inclination to be beta testers for Microsoft. Even if the exact cause is found, it is not likely that anyone here will
be able to fix the problem. There are literally hundreds of people complaining about this problem in multiple forums. If you know your consumer behavior metrics, then you know that means tens of thousands are affected. This is systemic, not
a random problem on a few errant machines. Microsoft needs to know that they have a major problem on their hands and they need to fix it. I saw this problem starting with IE 10. Is it any wonder that in that time, IE usage has fallen greatly
while Chrome has become the dominant browser? (The only reason I am bothering to write instead of just shifting to Chrome is that Chrome also has its bugs, one of which affects a web app I use several times a week, so I need a functioning version of
IE.)
So thanks Robert for all your help in the past, but this response isn't helpful.
Microsoft, are you listening? Fix your browser. -
Image does not load in application
Hi:
I read about the following in a loading image tutorial:
"The getImage methods return immediately, without checking whether the image data exists. The actual loading of image data normally doesn't start until the first time the program tries to paint the image. "
Basically, I am using the
Image img = Toolkit.getDefaultToolkit().getImage(path);I've also overwritten the paintComponent()method
public void paintComponent(Graphics g)
super.paintComponent(g);
g.drawImage(image, 0,0, myWidth, myHeight, this);
}Then, I included the above code in a JPanel, which is further included in a JInternalFrame. But somehow, the image just doesn't load, the tutorial says, the image does not load until the FIRST TIME PROGRAM PAINTS THE IMAGE. How do I make the program paint the image??
Thanx a lotCheck out ImageObserver, Component.prepareImage() and MediaTracker.
-
Site does not load after some minutes of creation or after restart the server
Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, ConfiguringHi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring -
When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
Please help, how can I fix this?
Thanks,
James.That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?
Same issue here, previously did work perfectly
Maybe you are looking for
-
Clone/Heal not working in LR 4.2 RC
I downloaded the Release Candidate, Lightroom 4.2 and found that the Spot remover is not working either in the Heal or Clone mode.
-
URGENT!!!Getting the Ip adds of all computers connected to my computer
I am developing a small project to track all the active connections with my computer (win 98 OS). i would like to get help on how to keep track of all computers accesing my system and getting thier ip adds..plz help Urgent. mail to [email protected]
-
Kanban - External procurement with multiple vendor
Hi Gurus, We are working on implementation of Kanban for external procurement (Scheduling agreement) in my organisation. As per the business requirement, some of the components are supplied by more than one vendor. As per the standard process, Kanban
-
Building dynamic columns in BO Report (BO 4.0)
Hi All To start with I am new to BO and using reporting tool I have a requirement to create a WEBI report which contain a table with a feature to hide / remove columns based on input selection. ( dynamic columns) I tried to do this by following conce
-
Can I use Photoshop Elements 4.0 with Mt.Lion?
I just got my new iMac desktop and haven't decided what to do about photo editing software. Any suggestions other than PE11?