Lsnrctl status , the listener has not recognized the password
lsnrctl statusthe listener has not recognized the password
what the command to give the listener password, i know its password...
C:\>lsnrctl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 08-FEB-2008 21:28
:33
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> help set
The following operations are available after set
An asterisk (*) denotes a modifier or extended command:
password rawmode
displaymode trc_file
trc_directory trc_level
log_file log_directory
log_status current_listener
inbound_connect_timeout startup_waittime
save_config_on_stop
LSNRCTL>
LSNRCTL> set password test
The command completed successfully
LSNRCTL>
Similar Messages
-
TNS-01169: The listener has not recognized the password
Dear All
I am using Oracle8 Enterprise Edition Release 8.0.5.0.0 on Windows XP
My problem is that
When I tried to stop listener by using lsnrctl80 stop it gives me the subjected error,
while when I stop the listener from Windows Servcies it stops successfully.
Plz note that when I start listener by using lsnrctl80 start it starts successfully.
Following is the information of listener.ora
LISTENER =
(ADDRESS_LIST =
(ADDRESS=
(PROTOCOL= TCP)
(Host= it-rhassan)
(Port= 1521)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = 0
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = it-rhassan)
(SID_NAME = GL)
(SID_DESC =
(GLOBAL_DBNAME = it-rhassan)
(SID_NAME = ERP)
PASSWORDS_LISTENER = (oracle)
Plz note that I alsed tried to give password same as the internal passwrod, and remove PASSWRODS_LISTENER but same error occured in each cases.
Thanks in advance for your help
HassanI did not find the exact solution on the suggested site. only found the Error Code and description.
Then I searched on Google.com and found following result which has successfully solved my problem.
LSNRCTL> change_password
Old password:
New password:
Reenter new password:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DBDEV1)(PORT=1526)))
TNS-01169: The listener has not recognized the password
LSNRCTL> set password
Password:
The command completed successfully
LSNRCTL> change_password
Old password:
New password:
Reenter new password:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DBDEV1)(PORT=1526)))
TNS-01169: The listener has not recognized the password
LSNRCTL>
Regardless of how you enter the password, through a single line or on the prompt, the change will not be successful. To change the password, you have to remove the line passwords_listener in the file listener.ora and then change the password.
Thanks
Hassan -
Listener Error "TNS-01189: The listener could not authenticate the user"
Good morning. We have a dual-homed (one home is 10.2.0.4 and the other is 10.2.0.5) server running a 10.2.0.5 listener. We accidentally applied the April2011 PSU to the 10.2.0.5 home without shutting down the listener. The PSU installed correctly but the listener now gives the error "TNS-01189: The listener could not authenticate the user" when any attempt is made to run the following lsnrctl commands: reload, stop, services, and status. When the start command is issued, it informs us the listener is already running (which is correct). The listener is working properly handing off database connections but we cannot administer it.
Would installing the PSU while the listener was running cause this problem? Any idea on how to reload the listener? We even went so far as to deinstall 10.2.0.5 on the server and reinstall it with a clean cloned copy of 10.2.0.5. We also tried to create a new listener (which it did) but would not start the new listener. It said one listener was already running.
From EM Grid Control, we can administer the listener (make basic changes to the listener.ora file) but we cannot stop the listener from EM Grid Control either. (Not a surprise.)
Ideas? Thoughts?
Server: Solaris 64-bit+>lsnrctl status listener+
LSNRCTL for Solaris: Version 10.2.0.5.0 - Production on 27-APR-2011 08:23:43
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=prodserv)(PORT=1521))
TNS-01189: The listener could not authenticate the user
I have read the Metalink doc (Doc ID 285439.1) and it seems like the two homes are causing some type of conflict. I am just not sure how to resolve the issue. I tried unsetting ORACLE_HOME in both 10.2.0.4 and 10.2.0.5 SID environments. The error I get then is the basic TNANAMES error. That sequence looks like this:
+>unset ORACLE_HOME+
+>echo $ORACLE_HOME+
+>lsnrctl status+
LSNRCTL for Solaris: Version 10.2.0.5.0 - Production on 27-APR-2011 08:28:27
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Message 1053 not found; No message file for product=network, facility=TNSTNS-01189: Message 1189 not found; No message file for product=network, facility=TNS
Am I not clearing out the ORACLE_HOME properly (as suggested in the Metalink doc)? -
I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book. I am using the USB connection. The macbook is not recognizing the camera. The macbook is running OSX 10.6.8. Any ideas on what the problem could be?
http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
According to this website the camera should be compatible with iMovie '11
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
So here's some steps to take to get the Mac to recognize your camera.
1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
No guarantees, but some things to try -
Bought a brand new battery from an authorized Apple Premium Reseller but the laptop is not recognizing the new battery
Yes, it says no battery installed. The battery icon with an X and system profiler saying no batter installed.
Tried the SMC Reset - didn't work! -
After updating my IPAD 64 the typing has not been the same. It takes 3 minutes to type in my password. Has anyone found a repair for this?
Reset all settings
Settings>General>Reset>Reset All Settings -
How do I access youtube videos on Safari? Resetting the browser has not fixed the issue.
So far the issue appears only with youtube. If I search, pressing "return" results in the image that's attached. (It has not reappeared in Firefox or Chrome. I just updated Firefox to 16.0.1 yesterday.)
It looks as though this might be an issue related to plugins, though I'm not sure how to proceed from here. All relevant software updates have been applied.Try some fundamentals such as opening Disk Utility (Applications - Utilities - Disk Utility) and Repair Disk Persmissions, run this 2-3 times. You can also Reset Safari, go to Safari - Reset Safari - Check all Boxes. Also while you are in Safari ensure all your plugins are up-to-date. Safari - Preferences - Plugins (I believe) and update them.
-
Is Ipad one still secure considering Apple has not provided it with the proper operating systems?
With Firmware updates, Apple will usually offer instructions to complete the update, since they require an additional step to complete. It sounds like you haven't finished the Firmware update completely.
Since it's your computer and investment, I wouldn't risk it and would visit your local Apple Store and let them solve the problem. In the meantime, read this link from Apple:
http://support.apple.com/kb/HT1557?viewlocale=en_US&locale=en_US
...to bring you up to date on the procedure. -
I wanted to use a different e-mail account for my apple id. I had no trouble changing it, but now when I try to use apps on my phone, they don't work (and they don't sync with the corresponding apps on my other apple devices). It keeps asking me for the password for my old ID. I have tried entering both (old and new, IDs and passwords) to no avail. I went to the store where I bought the phone (ATT) and they tell me that this is a common problem. Can I fix this myself or do I have to go to a store, which is a hassle?
Did you change the name of the AppleID like described here?
Change your Apple ID
http://support.apple.com/kb/HT5621
Then check this list of things to do, before you start using it:
Apple ID: What to do after you change your Apple ID -
I am getting the same message when I try to log in thru www.comcast.net on Safari, the Comcast Xfinity app and adding Comcast to my email accounts. I've also turned the phone on and off with no good results. My husband had the same problem and finally opened a Gmail account and had his Comcast email forwarded there. Any ideas would be appreciated.
Have you tried adding your comcast account using the built in IOS mail app.
If you're using the Comcast Xfinity app, then look at their support site or ask the app developer. -
I'm running V10.6.8 and the system is not recognizing the presence of a San Disc (SDHC) adapter that I plug into the left side of the keyboard. This always worked in the past. Whats changed? I can't upload my images to a folder.
Another item I'd found when getting an SD card for an older camera was the lack of backward support from the SD card if it was too new, while a newer camera can sometimes use an older SD card at a slower read-write speed. There are limits and ceilings on what kind of card works with old/new stuff.
So I ended up taking a nice SD card back to one store and had to settle on a 'walmart kinda dubious kingston two pack a cure' for the older Panasonic Lumix. Smaller capacity but seems to work OK for the era. I don't trust kingston with macs, but this 10 y/o Lumix seems to not care about that.
Hopefully you can obtain the correct cards, because some stores only sell parts for their inventory of cameras. And some adapters are limited too.
Depending on what I'm doing with the card and the camera it goes with, I attach the camera to the computer and not just the card in a reader. That way I can file items inside the camera SD card in a way the camera won't overwrite them. Later when I save everything from the card into an external hard disk drive, all my filed folders of images by date (I created in the SD) appear in order, in the later archive. Easier too, when I burn to DVD or CD media, to create yet another archive away from the computer or the camera.
Good luck & happy computing! -
I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"
Don't feel too bad. If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
If you downloaded from the link I gave you it will be Lr 5.4. The link was just to show you when the D4S was supported. The newest version is 5.7.1 and can be downloaded here. Don't know your OS so you will have to pick Windows or Mac. Product updates
On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version. If you are on Windows you will have to get help from a windows person. -
My child has disabled her ipod and i have had to reinstall itunes which is not recognizing the device to allow me to restore ipod to factory setting.
Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
For the past five weeks, iCloud has not recognized my automatically downloaded song purchases as songs within iCloud. After the songs download, they appear with the ominous striked out cloud next to a duplicate song with download cloud. To get a fully functional song library that I can use to iCloud playlists and use all the other wonderful features of iCloud, I have to delete the automatic downloads and download the new version by clicking on the iCloud download icon. This is tedious. I have considered just turning off automatic downloads, but I rely heavily on my television shows downloading while I'm asleep and being ready to watch when I wake up.
If anyone has a solution, I would greatly appreciate your help. I'm sure I did something to goof it up.
Thanks,
JohnHi,
I'm receiving the information that "No backups available.", but if i log in my icloud I find the backup.
What can I do? -
Account Information Not Recognized: The user account has been disabled.(FW
Hi Expert ,
I'm working with SAP Business Objects 4.0 SP2 patch 5 and SAP Enterpriseportal. I want to use Single Sign On with trusted authentication in enterprise portal. EP administrator has created an infoview in order to be able to connect the portal and BO.
I have configured trusted authentication in BO but when I try to use the infoview from the portal the following error appear:
"Account Information Not Recognized: The user account has been disabled.(FWB 00012) "
the user used in the sap portal is also defined and active in sap BO.
In order to activate SSO in BO I executed the following steps:
1. Log onto the CMC.
2. Went to the Authentication management area.
3. Select the Enterprise option. The "Enterprise" dialog box opens.
4. Scroll down until I see "Trusted Authentication".
4.a. Click Trusted Authentication is enabled.
4.b. Click New Shared Secret.
4.c. Click Download Shared Secret.
5. Selected Update to commit the shared secret.
6. Saved the trustedprincipal.conf file in the boe server in the path:
'D:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects
Enterprise XI 4.0\win32_x86'
7. Modified the file 'D:\Program Files (x86)\SAP
BusinessObjects\Tomcat6\webapps\BOE\WEB-INF\config\default\global.properties'
sso.enabled=true
sso.sap.primary=false
trusted.auth.shared.secret=
trusted.auth.user.param=
trusted.auth.user.retrieval=REMOTE_USER
8.Restart Tomcat
Please could anyone help me to resolve the issue?
Thanks in advance for collaboration.
regards
gio'Hi Giovanni,
The configuration you have wonu2019t work. You have two different web application servers: Netweaver and Tomcat. Your user credentials are only established in one of them: Netweaver. When you configure trusted authentication in Tomcat you have to authenticate the user in this Web Application server. The REMOTE_USER canu2019t pass from one server to another.
You can confirm this capturing your request using Fiddler in your browser.
If you want to configure the integration BI4 into SAP Enterprise portal, you can follow this guide:
http://wiki.sdn.sap.com/wiki/display/BOBJ/BI4IntegrationintotheSAPEntreprisePortal+7.0.x
Regards,
Julian
Maybe you are looking for
-
HT4534 How do I get 16:9 aspect ratio on Facetime
How do I get 16:9 aspect ratio on facetime?
-
Vector, what is the problem with this code?
Vector, what is the problem with this code? 63 private java.util.Vector data=new Vector(); 64 Vector aaaaa=new Vector(); 65 data.addElement(aaaaa); 74 aaaaa.addElement(new String("Mary"));on compiling this code, the error is TableDemo.java:65: <
-
Hi, Can we assign more than 1 XML result to an XML output property of a transaction? Like, "XMLOutput = Query_1.Results & Query_2.Results". Regards, Chanti.
-
Endless loop with pop-up window to upgrade Aperture
I have been using iPhoto and it keep updated. Using v.9.4.2. MaxOS is current v.10.7.5. I have tried Aperture but not really used it and don't keep it updated. It is v.2.1.4. Recently I chose a pull-down setting in iPhoto to open photos in Apert
-
To Purchase Outlook just for the purpose of managing could contacts between my PC and iPhone 4S would be a prohibitive expense!