LSO and Content Server Configuration

Hi,
I need to connect LSO to the Content Server - how and what should I configure to do it properly?
What information should I get from a client to be able to establish this connection?
Regards,
Otocon

Hi Otocon,
Please check this thread - LSO - Enterprise Portal Integration
Regards,
Sen

Similar Messages

  • DMS and Content Server configuration

    After installing the Content Server and creating a Content Repository, I have to make that documents be stored in that contet repository. Please, help me with this becasue it is not clear for me how to solve it.
    Thanks!
    Patricia

    Hello Everybody,
    my team and me need your help.
    We have the same problem...
    - Installed Content server on Win 2003 server
    - Using SAP ECC 5.0 and trying to create and configure content repository via 'OAC0'
    - This is initially our test environment so here we are not using any certificates
    When we try to connect the Content Server from ECC 5.0, an error popup appeared : HTTP error 401 "Error in configSet".
    Is somebody has  an idea ?
    Latheef (or someone else), could you please forward me the Configuration document on SAP Content server ?
    My mail is :  <email address deleted by moderator>
    Thanks in advance & Regards,
    Christophe

  • Configuration RCM and Content Server

    Hi,
    We want to use RMS (Record Management System) to manage documents (.doc, .xls, pdf...) and save these documents on content server.
    How can I configurate  RCM and Content Server?
    Please give me link to manual.

    Hello,
    I will suggest you to better to go with VAULT object setting in DMS. Because if you use content server then there will be few constraints. like you can access doc only via sap and its related objects. but via VAULT setting you have sepearte system where you store it and physically access it at any time without going via SAP and its related object.
    only u need to provide the ADMIN rights for system maintenance.
    Regards

  • Document stores in both SAP database and Content Server

    Hi,
    We don't want to store doc. in SAP database and chose to use content server. We have KPro checked in configuration also.
    Our basis team has created a content repository ZP that points to the content server, in the document area.. they enter "ARCHLINK" instead of DMS. So they told me to create doc. and pick this new ZP to store the doc. But we I created a doc. in CV01N, went to check in the original, the new repository ZP is not on the list of choice to pick from. So I cannot store the doc. in that new content repository.
    Our basis team told me that if we use DMS in the document area, the doc. stores in both SAP database and Content Server. We don't want to have doc. stores in SAP database that's why we have content server.
    How can I create DMS and store in content server only (not SAP database) ?
    Thank you,
    Sam Schwartzberg

    Hi Samantha,
    While check-in activity are you able to choose the new content repository i.e. ZP?
    If not then use t-code OAC0 and while creating the repository check whether the certificate is activated by basis or not .
    If not then you need to activate the certificate for the new repositoty in CSADMIN then only it will appear in the list while "check-in" the dcouments.
    Please check for the same. Also check the t-code OACT , this new repository is shown or not.
    I hope this will resolve the query.
    Regards,
    Ravindra

  • Content Server Configuration issue

    Hi Gurus
    I am working on Content server configuration.
    Installed Content server (640 build 201 ) on Win 2003 server
    - Using SAP ECC 5.0
    - This is initially our test environment so here we are not using any certificates
    I am facing issue with TXN (si24_csconfig)  configuration of newly installed content server.
    It flash error "error occured while creating depositories"
    Please note that this transaction will go on for some work if i try administrator user, which is the user for NT server where content server is installed. With any other user it again prompt for password and will not move forward untill I provide this user-pwd.
    When I check in txn slg1 log following is the error message:
    HTTP error: 500 (Internal Server Error)  "CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s
    Message no. CMS025
    Diagnosis
    Error in accessing via HTTP
    500 (Internal Server Error)
    "CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s
    Please suggest.
    Best Regards
    Jaswant

    Hi,
    Give the following parameter in CSADMIN for windows:
    Driver MaxDB
    Immediately the error goes away.
    Regards,
    Phani.

  • SAP Content Server Configuration multiple repositories

    Dear Gurus,
    We have a content server configured with SAP CRM.
    Recently we faced issue with large size of generic object created by user monthly in SAP R/3 (SOFFCONT1 growth )  thus we are considering to use content server for generic object storage.
    Could you please advice?
    1. As far as I know , I can have multiple repositories in content server thus can have my R/3 and CRM repositories in same content server ,  Please correct me , Any importent aspect which should be consider while doing such( except growth recalculation and user load for additional R/3 system).
    2. We are running SAP R/3 from past few years and we have a huge number of generic objects in R/3 database.
       Is it possible to migrate existing generic object to content server?
    Thank you
    Regards
    Ahmed
    Regards
    Arif Ahmed Qureshi
    SAP Basis Consultant

    Check
    Note 782614 - Using external Content Server in the BDS
    Note 389366 - Relocation of documents
    Note 530792 - Storing documents in the generic object services
    Markus

  • CFolder to Content Server configuration

    Hi
    Kindly let me know whether Cfolder can be configured to SAP Content Server. We have installed Cfolder in a seperate system and Content Server in a seperate server. 
    Regards
    Prasanna.B.S

    CFolder is an ABAP application, Content Server is a webserver with a library storing data in the database.
    How do you want to "integrate" them? Those are two different systems for different purposes.
    Markus

  • Plumtree - IIS and Content server - tomcat

    Can you please let me know that I have installed the plumtree on IIS. Now I have to install Collaboration 3.01 and Content Server. But the content server and Collaboration can be installed on following servers
    - Weblogic
    - Tomcat
    - Websphere
    Then can you please let me know how do plumtree installed on IIS will interact with Content server and Collaboration. IS there any way. This is very critical please reply soon.

    ------- Michael Bruce wrote on 7/14/04 7:41 AM -------Both Collab and content servers run on a Java server framework. That means that you have to have Tomcat, WebLogic, or WebSphere running and hosting those applications. Portal server can run on IIS. Portal interacts with Collab (as well as content, workflow, your portlets, Lotus notes integration, and many more) through http. The Portal makes a request to collab for content. Collab receives that request and processes it. The results are returned (Response) to the portal and the portal renders them as needed.
    To re-phrase, IIS do not interact with Collab or Content servers. Portal does, and it interacts using HTTP.
    Please let us know if that answers your question.
    Hope that helps,Michael [email protected]
    ------- Vivekanand Khune wrote on 7/14/04 9:20 AM -------Can you please let me know that I have installed the plumtree on IIS. Now I have to install Collaboration 3.01 and Content Server. But the content server and Collaboration can be installed on following servers- Weblogic- Tomcat- WebsphereThen can you please let me know how do plumtree installed on IIS will interact with Content server and Collaboration. IS there any way. This is very critical please reply soon.

  • OLM  oracle learing management and content server

    I want know about OLM oracle learing management and content server.
    how to install content server on a different server ( which set up i need to take and how to install it. ).
    Also how to integrate this content server with Oracle EBS?
    -Sagar

    Hi;
    Please check:
    Note.297108.1 - Oracle iLearning 5.0 Installation Guide
    Note.361958.1 - Oracle iLearning 5.0B Upgrade Considerations
    Note.364670.1 - Oracle iLearning 5.0B Upgrade Guide
    Regard
    Helios

  • Content Server Configuration to use FileSystem as Reposiroty

    Hi,
    We want to enable Content Server on our system. But instead of using the underlying database as the storage / repository we would like to use and external filesystem as a storage / repository. Also accessing the data thus stored would be using the HTTP service???
    Is there a step-by-step guide explaining how to do the configuration and enabling content server using external file system as the storage.
    Can anyone help
    Thanks
    Makarand

    perhaps this will help you:
    /thread/48852 [original link is broken]

  • SHarepoint as SAP Content Server Configuration

    Actually this message is for Espen Leknes because I have read something from him i another message but if you guys know about this, all will be wellcome !!!!!!!
    This is Andrea, Basis COnsultant. I am writing to you because I was reading lot of messages in SAP SDN regarding DMS and SAP Content Server.
    I saw you have participated in lot of messages. I am specially interested in one of them which is about Sharepoint.
    The customer I am working in would like to use Sharepoint as global Content Server and I would like to configure Sharepoint as SAP Content Server in order to save documents and attach them to sap objects (scanned invoices, manuals, cad drawings, etc)
    I know it is not possible since Sharepoint is not SAP certified and http inteface from SAP (archivelink) does not work with this product.
    I have read about Inet.DM and thinks like this.
    I read you have configured SHarepoint as WebDav. In some post you have written:
    Hi guys,
    There is a third way, where you end up using Sharepoint as your content server
    1. COnfigure a content server to use file storage
    2. COnfigure the file area for webdav
    3. The webdav is the sharepoint webdav
    Voila, you are using sharepoint as your content server.
    Why the heck you would do that is beyond me, but it works.
    Ok, the question is:
    I am using ECC60 and I dont have file storage option.
    Is is possible to explain this again or sent me screenshots os OAC0 ?? It would be very useful.
    Thanks so much in advance for this.
    Andrea

    Hi Andrea,
    I could find few of the links . Hope these are useful.
    Duet Enterprise is an SDK for integration between SAP and SharePoint
    http://sharepoint.microsoft.com/en-us/product/related-technologies/pages/duet-enterprise-for-sap-and-sharepoint.aspx
    configuration
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805b67bd-7e93-2e10-99b7-ebe8f3d359d3?QuickLink=index&overridelayout=true
    Regards,
    Deepak Kori

  • External Content Server configuration

    Hi,
    Can anybody provide me how to configure External content server for Archivelink.
    Regards
    Laxmi Bhushan

    Hi Laxmi,
    For contetn server installation use t-code OACT - maintain the repository here if not add it. Then in OAC0 define the repository means select are as document management,type HTTP content server or archivelink. Then maintain IP adress and port here.
    Then goto CSADMIN and here activate the certificate it's very important task.
    I hope this will resolve the query.
    Regards,
    Ravindra

  • Content server  configuration in  CSADMIN

    Hello Experts,
    i had install the  Content server 640/MaxDB 7.6on Solories platform . how to configure the CSADMIN in R/3 system . when we are adding the R/3 system , it need to mention  the HTTP script
    what i  need to mention in the field: HTTP script(.i. e /ContentServer/ContentServer.dll not in Solories )
    when i am connecting on  web browser it is serching for the same location (i.e /ContentServer/ContentServer.dll ).
    Please help how to resolve this issue .
    Thanks
    Rajasekhar

    Hai,
    Go to transaction code OAC0 , check whehter content repository is defined, if not crerate a content repository. give this in CSADMIN.
    And regarding the server details, use the f4 help, the details of the content server which you have installed will be displayed and you can select from there.
    Regards
    KK

  • SAP DMS and Content server installation.

    Hi,
    I am new in DMS. i have done configuration of DMS . now i want to store document on Content server.
    so how to install content server on windows server 2003.
    How to connect DMS and content sever?
    How to access document ?
    please help.
    Thanks,
    Dipak.

    Hi Ricardo,
    1. By using T-code DC10-Document type creation:- you will create Document type first.
    a. create document type
    b. define status if you need.
    c. Object Linking- if you want document attach to SAP object then you need to configure by using same T-codeDC10.
    and please go through below link:
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/CADMS/CADMS.pdf
    2. You want to Store document into SAP database/file system/SAP Content Server.
    a. you need to decide first where you will store document.
    suppose you select store into SAP Content Server then you need to select KPRO check-box in DC10. then you need to create Content repository by using OAC0 tcode an create storage Category in OACT transaction.
    b. suppose you want to store into File system then you need to configure Data Carrier in DC20 T-Code.
    c. if you want to store SAP Database then also you need to Content repository  same like SAP content Server in OAC0 tcode and select storage type as SAP DATABASE.
    and then create storage category.
    if you have any query please let me know
    Thanks,
    Dipak.

  • Solman and Content Server

    Hi Gurus,
    There is demand on my project to configure Content Server with Solman. My stance is that , why we need Content server or KW , if Solman already has the capability of storing documents ( road map and project documents-BBPs stc.) in its own repository.
    Is my stance sound Ok, if yes then is there ia any way we can see the contents of thses folders?
    waithing...point swill be awarded for any help

    Hi,
    you do not NEED a content server in conjunction with Sol Man to store documents. But you CAN make use of one if thats your requirement.
    Maybe you expect a large appearance of documents and want to keep the Sol Man Database small. Maybe the company is already using a content server for storing other kind of documents.
    Sol Man got the capability to store documents internally (/KWCUST/) so it's not a must to use a content server.
    /cheers

Maybe you are looking for