LSO Cancellation Workflow issue???

Hi Experts,
I have copied the standard LSO Cancellation Workflow WS12000004, whenever i cancel the course in the portal the workflow is triggering and generating 2 parallel work items of Time Dependent Sub workflow . There is no fork in the main workflow even though its generating the same sub workflow parallel. But as per my requirement the sub workflow need to generate once... How can i achieve this???
Thanks,
Srikag

Thanks for your reply...
Whenever the event is triggering only one workflow is trigerring but its generating 2 same work items parllely, but i am not sure why its happening... Inside the workflow there is a condition based on that it will choose the path as Time dependent or Time independent course these both are 2 different sub workflows... Time dependent sub workflow is trigerring twice...
I have checked the configuration in that they maintained the same workflow twice for different courses... Do you think this will be the problem...? If so 2 times the same workflow should trigger but in our case only one time workflow is trigerring but its generating the 2 same work items parllely...
thanks,
Srikag

Similar Messages

Cancel goods issue in DBM Order

Hello,
Is it possible to storno (cancel) the goods issue for positions in DBM order if the accounting period is already closed?
I would like to storno the position in the current period,hovewer system doesn't allow to do this because takes automatically past date - date of goods issue.
Thank you for your help!
BR,
rybka

Dear rybka,
Based on my understanding, you want to cancel Goods Issue of a position even when the period is closed.
In order to do so, the present cancellation cannot help you totally.
You would have to create a new action & event and implement a badi which uses a reversal movement type which would be done on present day and not during the closing period.
Hope this helps.
Best regards,
Harsha

Purchase order workflow issue

Hi All,
A PO is created and rejected by a user in user decision step.The workflow will end.If the PO is changed(amount) again,the release strategy is triggered for the same user.But the workflow is not triggering.If the release strategy is for a different user,its triggering the workflow.I have used a fork inside which 1 parallel branch contains a wait for significantly changed event & another branch contains the user decision step,po release step & rejection reason scenario.
Please refer the thread below.
PO Release Strategy Issue
Replies will be greatly appreciated.
Edited by: Feddie on Jan 3, 2008 11:43 AM

Hi,
This is not workflow issue(work flow is different term)
It seem problem of BADI (program written for creation of purchase order based on sales order)
Take help of ABPer so he/she can solve this issue
Kapil

Troubleshooting Approval workflow issues

We are getting this message from time to time and are unsure how to troubleshoot it.
It seems as though something is changing the document, what is the best way to figure out what?
Approval on DOCUMENT NAME has ended because the item that the task process is running on was changed.

Hi Daniel,
1.What message do you get?
2. Look in the Workflow History list, eg "http://sp2013/Lists/Workflow History". Do you find any errors in there?
3. Is the user account starting the workflow correctly synchronized in the user profile database?
4. Is the user account starting the workflow different from the Worflow Manager setup account? (more info at
http://technet.microsoft.com/en-us/library/jj658588.aspx#section7)
5. Are the User Profile Service and App Management Service started? See the green frames in the screenshot below, taken from Central Administration \ Manage Services on Server.
6.Are the App Management Service Application and User Profile Service Application started? Their proxies should be started as well. See the green frames in the screenshot below, taken from
Central Administration \ Manage Services on Server.
For troubleshooting sharepoint workflow issues, you can have a look at the blog:
https://technet.microsoft.com/en-in/library/cc298927%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
http://ranaictiu-technicalblog.blogspot.com/2013/03/sharepoint-2013-workflow-debugdiagnosis.html
https://infopathandsharepointdesigner.wordpress.com/2013/12/13/five-top-tips-for-troubleshooting-sharepoint-workflows/
http://blogs.technet.com/b/victorbutuza/archive/2009/02/26/how-to-enable-workflow-tracing-debug.aspxBest
Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Cancellation Workflow for PO

Hello SRM Gurus,
We have a business requirement when purchaser cancel PO due to some reason it should go to his manager for approval. So my question is that is it possible to configure PO cancellation workflow (extnded classic). If yes how can we do it ?
Thanks,
Prashant

Hi Prashant,
I do not see why it couldn't be possible to trigger a 1 step WF in case of PO cancellation.
In the criterai, you should be able to use the PO item status (cancelled) to drive your WF requirement.
Kind regards,
Yann

Workflow issue in HR Process and Forms

Hi Experts,
I am new to HR process and Forms.
I am facing workflow issue in "change of position" process.
The process is not going from manager to HR admin.
Can anybody help me out on this.
Thanks in advance
Regards
Rahul

Hi Sahir,
Thanks for your quick response.
I checked in swi1 but it is showing "no entry exists"
I have done all basic settings using PFTC and OOCU_RESP tcode but still it is not working.
is there any other customizing that is needful??
Regards
Rahul

Workflow issue with interco transactions & general ledger entries in F-02

Hello Experts,
We are encountering a workflow issue when we are entering intercompany transactions with general ledger entries in F-02. Our workflow is set up with two release levels and the details are as follows:
Amount below $2500 - single release level
Amount above $2500 - two release levels
The document type that we are using is SU and it is configured with intercompany postings and trading partner enabled in the control data.
After parking a GL document that has interco amount entries below $2500 and general ledger amount entries above $2500 in F-02, the document is supposed to go to the two release levels in the workflow because the total amount is above $2500 (interco amount + general ledger amount > $2500). However, in the workflow, the document went to the single release level instead of the two release levels.
Any idea why the subledger amount takes precedent over the general ledger amounts in determining the workflow release level?
We would appreciate your help in solving this issue.

You cannot change the design of the system.
SAP may consider the change of design if all the users across the industries are reported. If a single user has a special requirement, it cannot be changed.
You need to ask, whether this is a critical requirement for your business. Otherwise, please follow the standard way.

Cancel Workflow Button - Custom OA Page

Hi, I tried searching for this, but didn't find anything.
Is it possible to implement Cancel workflow process Button in Custom OA Page? If yes, some help would be much appreciated
Thanks
Ved.

Hi,
Please elaborate your requirement...
If you want a button who will submit a Concurrent prgram for WorkFlow Cancellation then you can do it
using OracleCallableStatement.
Thanks,
Gaurav

LR 3 Bug Report - file renaming error - significant workflow issue

System configuration:
MacPro Dual 2x2.66Ghz Dual Core Intel Xeon
9GB RAM
OSX 10.6.4
Lightroom Application on System Drive
Canon .CR2 files and Lightroom Catalog on internal software-based RAID drive
Camera Raw Cache set to 50GB and resident on System drive
Here is the issue:
Once I finish the first round of editing a group of photos, I then rename them with the title of the event and a sequence number. I use LR's batch rename feature in the Library module. If I then delete 1 or more of these photos and attempt to rename them again(same event title + numerical sequence), the new names do not properly apply the numerical sequence after the filename. Either of the following can happen, and whcih one will happen is not dependednt on what I do.
1. The files can be renamed, with the first image having a sequence number 1 number higher than the lowest number I typed into the sequence box in the batch rename dialog (if I type a number 1, the sequence starts at 2). There are also random gaps in the sequence numbering scheme. For example, the numbers will count to 15, then skip to 17, then count to 176, then skip to 178. The rest of the files might be renamed correctly, or there might be gaps. The gaps always skip a single number, and most of the time the numbers skipped are odd numbers, though numbers with a 16 are usually skipped (16, 116, 216)
2. The files can be renamed as mentioned above, but with the addition of a -1 to the end of the sequence (example: filename-200-1 or filename-3-1). The addition of the -1 is also random, though it is more common with lower-numbered files than higher-numbered files.
I have experienced this bug on groups as small as 50 photos or as large as several hundred. I have tried remaning the files to a completely different text/sequence combination and then back to the one I want, and it does not help the issue. The sequence numbering is more likely to have more gaps the more virtual copies are present in the series of photos being renamed.
This is a major workflow issue for me because the files I deliver have to be named sequentially, without gaps, following a specific text/numer naming convention. The bug is currently adding many extra hours to my post-production time. Any assitance would be greatly appreciated.
Thank you

Thanks for the detailed description. I was able to repro this with your steps and have logged a bug for futher investigation.
Becky

Cancel goods issue using idoc DELVRY03

Hi,
IS it possible to cancel goods issue using inbound idoc DELVRY03.
The field 'qualf' of the segment E1EDL43 says it's possible to do It. But when I try to do IT I have a message saying that the GI has already been performed and that I can't do anything on the delivery.
Do someone know if It's possible or not using DELVRY03.
And if not what is the idoc allaowing this.
Thanks in advance

Hi omar,
i have your same trouble.
Have you found anything?
thanks in advance

Workflow issue after upgrade to ECC 6.0

Hi,
we are facing an workflow issue and thought if someone has faced similar issue and could help us.
We've an approval workflow for purchase requisitions through release strategies. For some steps, if the approver is 'WF-BATCH' user, we are executing that step using a program. This program first set the workitem to completed status( this part is working), then it will close the purchase requisition to release status for a particular release code( this part is working) and then we are triggering the 'RELEASE' event for the business object providing the Object key which should take it to the next step( THIS IS NOT WORKING). The business object is custom. This was working perfectly in 4.7 version of SAP but this logic is not working in ECC6.0. we are using SAP_WAPI_CREATE_EVENT to trigger the event. But the workflow doesn't move on to next step.
Have anyone of you have any idea as why this might be happening. Any information on this would be of great help.
This is happening in ECC 6.0. USED TO WORK IN EARLIER VERSION.
Regards,
Sam K

Hi,
Is WF-BATCH having proper auth. ?
Or, if you are using the FM SAP_WAPI_CREATE_EVENT in some program and is scheduled as a batch job, then that user under which this batch job is runnign should have proper auth. to raise the event. Please check those.
Also, what the error (if any) says in SWEL ?
venu

Workflow issue-Agent not maintained

Hi All,
I have a workflow issue. For a PR, the workflow is throwing up the error as :
"Agent not maintained for plant XXXX planner group XXXX release code.
Please maintain an agent for the above key in the Agent AssignmentTable,and forward the workitem with text "Release requisition XYZ" in your Workflow inbox to an appropriate Approver."
Please help me out on this one.
Thanks,
Swati.

HI
Check 'Agent Assignment' in not green..
Then push the button 'Agent.Assign for TASK' in front of 'Agent Assignment'.
Next, You can go the maintain screen.
Push 'F8' or 'Attributes...' and check 'General Task'.
and try again..
Good luck

Content Workflow Issue using Cineform/PPro/AE

Hello, I have a potential workflow issue that I need some advice on. I'm currently editing a project in Premiere Pro CS3 using the Cineform intermediate codec (the video was shot in HDV--Canon HV30--imported using AspectHD). Everything is working fine.
However, I'd like to export some of the video of this project off to a portable hard drive to physically hand over to someone who will be importing it into After Effects CS3 (on a completely different hardware system) to spice things up for me--i.e. they are going to make a flashy intro/title for this project.
Lastly, I would like to re-import her finished video back into Premiere. She does not have the Cineform codec so exporting it as a cineform.avi file is out (I would think--or am I incorrect here?). My question is mainly--what is the best file format to hand over to my AE person AND what is the best file format for my AE person to give back to me to re-import into Premiere and keep it all in HD/HDV 16:9?
I have no idea if this is a really easy thing, or really challenging. Any thoughts or suggestions are greatly appreciated.
Bill

Hi Bill
well the best person to answer that question is the lady who is doing the afterv fx work for you. only she knows what her system can handle. I would recommend first and foremost uncompressed avi if she is on windows or uncompressed .mov if she is on a mac. otherwise if she cannot handle uncompressed because the file is too big you could give her a quicktime animation. i think the file is a little smaller than uncompressed but i could be wrong. but qt animation is still a big file. you could also render out the video as an image sequence I recommend a TIFF sequence suing LZW compression to keep the file sizes down. give her the image sequence she can add the fx and then she can render out the final product as an image sequence again which you can match up with the audio track on your pc. she can also give you an uncompressed file which you can then render out to cineform.
angus

Cancelling workflow in sourcing7

Hi,
I am using sourcing 7. My question is, how do I cancel a workflow? I do not see Workflow Definitions -> Current Workflow Processes in sourcing 7.
Scenario: Contract document is submitted for approval. Approvers receive an email to take necessary action on the document.
System admin logs in and wants to cancel the workflow. After this the Approvers should not see the pending action item and contract document status will move back to previous phase.
Appreciate any help.
Regards
Moumita

Hi Palz & Moumita,
In our landscape we have enabled cancel on Contract Document screen with following option
1) Copy the standard report for cancelling Workflow and create one restricted to the current Contract Document (This can be done with a hidden filter) - Note for this type of query to work, a new Query group has to be created for Contract Document since the hidden filter would be of Object Picker type
2) Create a new report for the custom query
3) Add this report to the "Document Report Configuration" for Contract Document
To Cancel the workflow -
1) Open the Contract Document in Workflow
2) Go to Reports on Contract Document toolbar and run the report to cancel Workflow
3) New pop up window opens with option to Cancel the Workflow
Regards,
Balaji

OIM 11.1.1.5 Approval Workflow Issue

Hi,
I have installed OIM 11.1.1.5. While self-registration of a user, the request is created and by default assigned to xelsysadm as the request level approver.
However, when the approver logs in, assigns the organization to the user and approves the request, it is shown that the approval task is completed.
But the request status doesn't change and remains "Obtaining Request Approval" and thus the user is not created in OIM.
In SOA server, on checking the logs (soa_server1-diagnostic.log) we found the following error -
[soa_server1] [ERROR] [] [oracle.soa.bpel.engine.dispatch] [tid: orabpel.engine.pool-5.thread-4] [userId: weblogic] [ecid: ee9b8be672bf5ad0:-72f1c18e:1399f6dc058:-8000-0000000000000108,0:1:100000006] [APP: soa-infra] failed to handle message[[
java.lang.NoSuchMethodError: oracle.wsm.policy.model.IPolicySet.getStatus()Loracle/wsm/policy/model/IPolicySet$POLICYSET_STATUS;
We are unable to resolve the issue, we've tried using a custom approval workflow instead of the default approval workflow.
Kindly help.
Edited by: 957679 on Sep 7, 2012 6:17 AM
Edited by: 957679 on Sep 7, 2012 6:19 AM

Hi ,
I actually faced the same issue some time back .., it took me almost a week to resolve it ..
This is happening basically due to incompatible version of wsm-policy-core.jar on your server . Please check all the FMW s/f installed on your server . One of them is incompatible with OIM 11.1.1.5.0 .
Are you using BIP 11.1.1.6 by any chance .
Thanks
Suren

LSO Cancellation Workflow issue???

Similar Messages

Maybe you are looking for