LSO Correspondence doesn't work with vCalendar attachment in MSOutlook 2007

Hello,
Is anyone using the Learning Solution Request-Based Correspondence with either vCalendar attachments and Microsoft Outlook 2007?
Our client moved from Microsoft Outlook 2003 to Microsoft Outlook 2007. None of our vCalendar attachments work since we have moved to Outlook 2007. When we try to open the .VCS attachment, we receive an error message stating that it is not a valid Internet calendar file.
I even tried .ICS attachment but same error pops up !
Any work around !!
Request to help , it would be greatly appreciated !!
Thanks!
Hello SAP Gurus ,
    Please help me out on the issue.
    or any alternative to this.
Thanks in advance
Edited by: Kumar214reddy on Jan 19, 2012 3:45 PM

I was experiencing this same issue and have finally have it resolved with a code recommendation from SAP.  Hopefully you have already performed all the actions as outlined in this document:
http://aspireopenmic.com/2011/06/29/lso-outlook-calendar-requests-as-attachments/
However this does not work with Outlook 2007/2010 - only with Outlook 2003.  I had to do this additional work:
1) Copy Class CL_LSO_CRP_RENDER_EXAMPLE to ZCL_LSO_CRP_RENDER_EXAMPLE
2) Edit the method CREATE_VCAL of this new class.
     - Comment all code out from this line onwards:
  * BEGIN:VCALENDAR
    ls_soli-line = 'BEGIN:VCALENDAR'.
   APPEND ls_soli TO lt_soli.
  * Add CR/LF
    LOOP AT lt_soli ASSIGNING <fs_soli>.
      <fs_soli>-line+253(2) = cl_abap_char_utilities=>cr_lf.
   ENDLOOP.
3) Add this statement:
DATA: helpstring    TYPE string.                  
4) Add the following code within the method:
* BEGIN:VCALENDAR
  CONCATENATE 'BEGIN:VCALENDAR' cl_abap_char_utilities=>cr_lf
    INTO helpstring.* BEGIN:VCALENDAR
  CONCATENATE helpstring 'VERSION:1.0' cl_abap_char_utilities=>cr_lf
    INTO helpstring.* BEGIN:VEVENT
  CONCATENATE helpstring 'BEGIN:VEVENT' cl_abap_char_utilities=>cr_lf
    INTO helpstring.* ORGANIZER
  CONCATENATE helpstring 'ORGANIZER:MAILTO:' ls_data-sender-smail
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.* ATTENDEE
  CONCATENATE helpstring 'ATTENDEE;ROLE=ATTENDEE:' ls_data-astxt '<' ls_data-amail '> '
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.* DTSTART
  CONCATENATE helpstring 'DTSTART:' ls_data-kbgda 'T'
    INTO helpstring.
  IF NOT ls_data-kbtim IS INITIAL.
    CONCATENATE helpstring ls_data-kbtim INTO helpstring.
  ENDIF.
  CONCATENATE helpstring
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.* DTEND
  CONCATENATE helpstring 'DTEND:' ls_data-kndda 'T'
    INTO helpstring.
  IF NOT ls_data-kbtim IS INITIAL.
    CONCATENATE helpstring ls_data-ketim INTO helpstring.
  ENDIF.
  CONCATENATE helpstring
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.* LOCATION
  IF NOT ls_data-b_ort IS INITIAL OR NOT ls_data-rstxt IS INITIAL.
    CONCATENATE 'LOCATION:' ls_data-b_ort ls_data-rstxt
      INTO l_subject SEPARATED BY space.
    CONCATENATE helpstring l_subject
      cl_abap_char_utilities=>cr_lf
      INTO helpstring.
  ENDIF.* CATEGORIES
  CONCATENATE helpstring 'CATEGORIES;ENCODING=QUOTED-PRINTABLE:EDUCATION'
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.* CLASS
  CONCATENATE helpstring 'CLASS:PUBLIC'
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.* SUMMARY
  CONCATENATE text-001 ls_data-kstxt INTO l_subject SEPARATED BY space.
  CONCATENATE helpstring 'SUMMARY;ENCODING=QUOTED-PRINTABLE:' l_subject
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.* DESCRIPTION
  CONCATENATE helpstring 'DESCRIPTION:' l_subject
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.* END:VEVENT
  CONCATENATE helpstring 'END:VEVENT'
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.* END:VCALENDAR
  CONCATENATE helpstring 'END:VCALENDAR'
    cl_abap_char_utilities=>cr_lf
    INTO helpstring.
  CALL METHOD CL_DOCUMENT_BCS=>STRING_TO_SOLI
    EXPORTING
      IP_STRING = helpstring
    RECEIVING
      RT_SOLI = lt_soli.
5) Activate this class
6) Search for all occurances of where method CREATE_VCAL is used within class CL_LSO_CRP_RENDER_EXAMPLE
7) Replace following statement:
    lr_document = cl_lso_crp_render_example=>create_vcal( lr_reader ). 
with: 
  lr_document = zcl_lso_crp_render_example=>create_vcal( lr_reader ). 
This should resolve any problems now with the calendar attachments.

Similar Messages

  • My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!

    My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!              
    I've got an MSI KT3-ULTRA2 mainbord, and I have a NEOLEC VENEZIA TB Cooler. But when I attach my NEOLEC cooler and I start the machine, the machine shuts down within a couple of seconds, and I get nothing to see on my screen. The weird thing is when I turn the PC on, the cooler starts rotating so it can't be broke, but then the pc shuts down i a couple of secs. So pleezze anybody help me!!
    The weird thing is that I also have a coolermaster cooler, and that one works fine. But the problem is that this coolermaster is designed for AMD XP 1900+, and I ahve an AMD XP 2200+ that's why I bought the Neolec Venezia TB cooler.
    Grtzz
    skeleton

    one easy thing to watch for... see if the heatsink or fan is in contact with any part of the motherboard, like... if it is too big and touches something that normally wouldn't be in contact with a fan or heatsink.  If so, it could be shorting it.

  • Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

    Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it.  Do I need a new code or am I missing something?  Same goes for my Photoshop cs.

    you need your serial number.
    if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

    I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

    What have you tried?
    You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
    Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
    Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
    Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

  • My i pod nano first generation doesn't work with windows 8

    My i pod nano first generation doesn't work with windows 8

    Howdy yvesmd,
    Thanks for using the Apple Support Communities.
    If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
    Apple - Support - iPod - iPod nano Troubleshooting
    Cheers,
    Alex H.

  • Quicklook doesn't work with .avi files

    Hello, i've got a little problem right here on my mac. The thing is that I used to have Snow Leopard as a OS and quicklook used to work great, it opened all the extensions I used to work with. The thing change when I format my HDD and installed a clean copy of Lion OS. Now quicklook works fine as it used to but not any more with .avi files. I remember that this feature was working great on my previous OS, and it's really important for me to find a solution because quicklook is an absolutely amazing feature of our Macs.
    I've tryed to download plugins, restoring permissions or even trying it with a guest user, but no success.
    Please help me. If you need more info about specs or something i'll be glad to give them to you.
    Thank you!!!

    Also doesn't work with Grapher (.gcx) documents (an Apple format).

  • The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android phone worked perfectly with my car.  Even the tech guy at Lexus couldn't get it to work.  What is apple doing to fix this.

    The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android worked perfectly with my car.  Even the tech specialist at Lexus couldn't get it to work.  Lexus said that other iPhone 5s were having the same problem.  What is apple doing to fix this?

    Going to the local Apple store this morning...
    My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
    I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
    IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
    The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

  • Satellite M40-129: PCMCIA Card doesn't work with Linux

    I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
    Any idea why it doesn't work with my M40-129 ?

    Hi
    Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
    http://newsletter.toshiba-tro.de/main/
    You should check the OS machine compatibility and the other areas.
    Im sure you will find many useful tips.
    Good luck

  • HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password.  One site said that Apple TV doesn't work with WPA which Uverse uses.  Is there anyway around this or will Uverse and Apple TV just not work together.

    Trying to set up Apple TV with ATT Uverse.  I get errors when trying to enter my WiFi password.  One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption.  If true, does that mean Uverse subscribers cannot use Apple TV?

    Spurs63 wrote:
    does that mean Uverse subscribers cannot use Apple TV?
    No, that's a rather silly conclusion.
    There are two options:
    stop using the crappy router provided by the ISP.
    Physically connect the ATV to the router via Ethernet.

  • My cellcom line doesn't work with my iPhone here in Israel, why? Is there any way I can solve this issue?

    My cellcom line doesn't work with my iPhone here in Israel, why? Is there any way I can solve this issue?

    Please explain.
    What does "cellcom line doesn't work with my iPhone" mean?
    What are you trying?  What is happening?
    Where did you buy the iphone?
    Any info abnout your issue at all?

  • Media Encoder CS4 doesn't work with Premiere (pic related)

    Oh hai!
    I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
    Encoding failed
    Could not read from the source. Please check if it has moved or been deleted.
    And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
    I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
    I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
    Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

    Hello, this is terrible problem, which i found in CS 6 softwares ...
    solution i found only working, is uninstall and reinstall full package.. but it is not all,
    you need to do BRAND NEW admin account in windows, and install it there.
    that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
    1.by reinstalling of software, client WASTE HIS TIME
    2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
    I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual  "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..  
       I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
    History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
    1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) . 
    I continued my work on my normal working windows profile . (profile A)
    Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
    2. suddenly it stop working (without knowing any possible reason - i did not do installations )
    and showed in error export log file :
    "Could not read from the source. Please check if it has moved or been deleted."
    3.repair via procedure(procedure "a"):
    i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
    I did these steps :
    a-uninstall master coll suite
    b-i used Adobe cleaner tool (remove ALL)
    c-removed raw directories in locations
    •C:\Program Files\Adobe
    •C:\Program Files(x86)\Adobe
    •C:\Program Files\Common Files\Adobe
    •C:\Program Files(x86)\Common Files\Adobe
    •C:\ProgramData\Adobe
    d-removed these links from registry file
    •HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
    •HKEY_CURRENT_USER\Software\Adobe
    •HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
    •HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
    e-restarted the PC
    f- newly installed the Master Coll CS6
    g-update the software
    result of repair of "3" : problem still exists
    4.Ok i find out after coordination with support, it should have been created  ANOTHER NEW admin account.
    4a:so i did the same procedure (uninstalling) in profile B
    4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
    4c: restarted the pc (and did not updated it yet)
    result :
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
    (in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
    problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
    this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
    what i expect :
    to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
    what i do NOT expect from Adobe:
    to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

  • Apple tv mirroring doesn't work with ipad 2

    Apple tv mirroring doesn't work with ipad 2 and last update achieved

    you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

  • Apex 4.2 pre-prod Theme 50 doesn't work with BlackBerry 6.0

    The theme 50 in the pre-pod 4.2 on apex.oracle.com doesn't work with BlackBerry version 6.0. Input fields turn black with black when they get focus
    This is a Jquery Mobile bug.
    See
    http://stackoverflow.com/questions/11870842/how-to-fix-a-blackberry-browser-input-from-going-black-on-focus
    https://github.com/jquery/jquery-mobile/issues/4828
    https://github.com/jquery/jquery-mobile/issues/4836
    Any chance of implementing a work around or patching JQM?

    Putting the second suggestion at Stack Overflow into the in-line CSS seems to have done the trick.
    .ui-btn.ui-focus, .ui-input-text.ui-focus, ui-input-search.ui-focus {
    outline: none;
    -webkit-box-shadow: none;
    There is still an issue that when a link is selected it show the same behaviour but that's more liveable with and I haven't given up hope of finding the class which is causing it.
    The JQM guys look like they have a solution too but I couldn't work out which version it would be applied to.

Maybe you are looking for