LSO: Duplicated Records Created For Each Person During Booking For Course

Dear All,
Since 2 months ago, I've been hitting the following issue.
When I book an employee to a course through ESS, duplicated course participation records are created in the system.
The duplicated records are having different booking priorities.
And I aware that, this happened to the course which has workflow tagged to it.
Sometimes, instead of having duplicated records created, it hit dump with the following message:
"The ABAP/4 Open SQL array insert results in duplicate database records."
Does anyone know what problem is this?
Thanks.

Did you solve this problem, Im facing the same problem.
My HRP1001 table is increasing.

Similar Messages

How do I set birthday reminders without having to create a separate contact card for each person in a family?

I'm trying to set birthday reminders in iCal based on the birthday field in Contacts. But in order to create separate birthday entries for individuals in the same family, you have to set up a separate card for each person. Anyway around that?

Thank you to johnbeardy, Anthony.Ralph and Rob for your replies. The OP (I guess that's me, Maps Man) has been happy with CS since CS2. I have upgraded etc and used it successfully. Unfortunately, I have recently up graded my camera as well but CS5 would not read the new RAW files. My natural inclination was to look at a CS upgrade but Adobe effectively priced me out. It obviously is not interested in amateur hobbyists anymore perhaps because they don't produce enough cash for Adobe. Even the new "Cheap" offer they are offering is still very pricey as well as being ongoing for life. I looked at a variety of alternatives including Elements, Lightroom and DxO Pro 8. In the meantime I used a combination of Nikon's ViewNX2 to judge my uploads off camera then Adobe DNG Converter to change them to DNG and back to CS5 for the fun bit. Rightly or wrongly, I decided that Lightroom was the least objectionable both for cost and user friendliness. And I do like the results I get using it. I can now go back to coming straight out of camera, do a substantial amount of edit work and go directly to CS5 for final touches such as size and frame (perhaps Lightroom does that also but I have not yet found how! Time will tell.) It is just that I find the first part so annoying. I do not mind organisations giving us suggestions (e.g. Catalogues) I just find it a nuisance that I cannot say "Thanks, but no thanks it is too complicated for what I want." As for using it "properly" it is debatable whether Adobe's engineers have done it "properly" if they don't give that choice. After all, CS5 etc does not need catalogues to work well so why should Lightroom's catalogues be "proper?"
Obviously I will be sticking with Lightroom and I will try to find my way round the problem. I had hoped that there may have been some way to customize it for my needs but there does not seem to be.
Thank you again for your comments.

Do u need a separate apple Id for each person

Do u have to have a new apple ID for each person, if so everyone in my family will have to get one. Right now we all share the same id and I cloud and it is messing stuff up. Will u be able to get things back that u already bought if everyone gets a separate apple Id.

Only in Settings > iTunes & App Stores > here one purchasing Apple ID (apps, books, music can be shared), others should use their own Apple ID for all other Apple services.
Here's some tips: Note it's valid for IOS 6
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

Usage of for-each loop inside another for-each loop

Hi All,
I have tried using a for-each loop inside another for-each loop as given below.
<?for-each:G_1?>
<Customer Details>
<?for-each:G_2?>
<Address>
<?end for-each?>
<?end for-each?>
Its not getting inside the second loop.I have referred this link
Re: Loop Question but it didn't help me much.Please let me know if am going wrong somewhere.
Regards,
Sudeep.

Sudeep,
The syntax of the for-each statements looks oke. but you have omitted some question marks after the < and before the >.
Furhermore, there cannot be spaces in XML element names. So, "Customer Details" won't work. Change it to something like: "Customer_Details". Also be reminded that the element names are case-sensitive.
try this:
<?for-each:G_1?>
<?Customer_Details?>
<?for-each:G_2?>
<?Address?>
<?end for-each?>
<?end for-each?>
Regards,
Kevin

Lotus Notes 5.x Personal Address Book for mailings?

Is it possible to use the Lotus Notes 5.x Personal Address Book for mailings in StarOffice 7?
There is no direct choice for Notes in Extras/Datenquellen.
Regards,
Volker

You will need to check to see how you configured CCM Enterprise parameters. most of the time, the pararemeters need to be set to IP address, not hostname. I find hostnames for the CM servers to be a pain in the rear for "services" "directories" etc.
Unless you want to configure DNS on the IP phones to resolve the hostname of the CM5 server, then then it will also work. But your problem is that your phones configs think that the Directories URL is http://cmhostname/xxx/xx instead of URL http://ipaddresscmserver/xxx/xx

Between our family,the 5 of us we have 11 devices: 5 ipods, 1 ipad,3 itouches and 1 iphone but only 1 itunes acct. Having problems when we log in-anyway around setting up individual accts for each person?

Within our family, the 5 of us we have 11 devices: 5 ipods, 1 ipad, 3 itouches, and 1 iphone4 {+ a mac laptop} but only 1 itunes account. We are having problems logging into itunes. Friends have said our problem is either: you can only have 5 devices on 1 account or you have home sharing maxed out {we have the itunes loaded on 4 computers + my computer at work}. ... not sure how we can resolve this. Do I have to set each person up with an itunes account? Seems werid my kids under 12 having their own account. please advise.. with the populairty of apple devices, I would think others have this same problem???

jbrooker, I am having a similar issue to roaminggnome, we have 4 windows laptops, 2 iPhones, 5 ipods.
I have the iTunes account and the music Library on my laptop and this is used to sync to my iPhone and 4 iPods = 5 devices.
I have managed to share my library with my wifes laptop and she can access it when my PC is not on, she is also able to sync her iPhone to her laptop. She has her own iTunes account.
My son has an iPod and laptop but no iTunes account, his iPod is synced to my laptop and my iTunes account. But his laptop cannot download my iTunes Library he is getting a message saying that my iTunes account is synced to the maximum of 5 devices. Thus he can only see the library when my laptop is at home (and I take my Laptop to work etc).
Would this problem go away if my son has an iTunes account? He's only 11yo so I'm reluctant to set him up with one just yet.
Any advice would be appreciated.
Cheers.

How to define a separate virtual host for each client in ICF for WebDynpro

Hi,
We have an ERP system with multiple clients running on it. The WebDynpro ABAP applications once developed are available on all clients, as standard. However, this is not our desired behavior. We want:
1. The WebDynpro ABAP applications should be managed separately in SICF depending on the client
2. The URL for accessing the WebDynpro application should have a own host name for each client. e.g.
A WebDynpro application on client 100 should be accessed by http://host1:5000/sap/bc/... and the same application on client 200 should be accessed by http://host2:5000/sap/bc/...
After a while researching I find out that creating a virtual host for each client in SICF would be a possible solution to fulfill the above mentioned requirments:
1. Set the profile parameter is/HTTP/virt_host_* with corresponding host name and port number
2. Create a new virtual host in SICF assigning the profile paramter to it
3. Assign a client to this virtual host
My question is how to specify a client to a virtual host? I didn't find any possibilities in SICF!
Anyone can help me? Thanks a lot in advance!
Best Regards
Di Li

Hi Srikishan,
thanks for your reply. Your suggested way is certainly a potential, and also my preferred option for solving the multiple-client-capable URL access to WebDynpro / BSP applications.
However, for some reasons, based on the customer requirements, the client should not be visible in the URL. The URL for accessing the WebDynpro / BSP applications on different client should have different host name, as if they are different companies. Besides that, we want to manage each WebDynpro / BSP application on different clients in SICF separately.
Therefore, at least on my opinion, we need to introduce a virtual host for each client in SICF. But how do I make it happen?
Regards
Di

How to compare the value node of a for-each-group with other for-each-group

Hello!
I have a report in Oracle BI Publisher (10.1.3.2) with several data set. My XML schema is something like
<DATA>
<PARAMETERS>
<MY_PARAMETERS>
<A_ID>12345</A_ID>
<DESCRIPTION>ABC</DESCRIPTION>
<VALUE>111111</VALUE>
</MY_PARAMETERS>
<MY_PARAMETERS>
<A_ID>12345</A_ID>
<DESCRIPTION>DEF</DESCRIPTION>
<VALUE>222222</VALUE>
</MY_PARAMETERS>
<MY_PARAMETERS>
<A_ID>67890</A_ID>
<DESCRIPTION>ABC</DESCRIPTION>
<VALUE>333333</VALUE>
</MY_PARAMETERS>
</PARAMETERS>
<NAMES>
<MY_NAMES>
<A_ID>12345</A_ID>
<NAME>ASDF</NAME>
</MY_NAMES>
<MY_NAMES>
<A_ID>67890</A_ID>
<NAME>EFGH</NAME>
</MY_NAMES>
</NAMES>
<VALUES>
<MY_VALUES>
<A_ID>12345<A_ID>
<VALUE>10987</VALUE>
<DESCRIPTION>ASDFG</DESCRIPTION>
</MY_VALUES>
<MY_VALUES>
<A_ID>12345<A_ID>
<VALUE>26385</VALUE>
<DESCRIPTION>EFGHI</DESCRIPTION>
</MY_VALUES>
<MY_VALUES>
<A_ID>67890<A_ID>
<VALUE>24355</VALUE>
<DESCRIPTION>ASDFG</DESCRIPTION>
</MY_VALUES>
</VALUES>
</DATA>
I'm trying to build a rtf template in Word using this XML schema. The "A_ID" nodes in each group in my data have the same value. I want for each "A_ID" take the respective values in /DATA/VALUES/MY_VALUES.
<?for-each-group:MY_PARAMETERS;./A_ID?>
<?for-each:current-group()?>
<?choose:?><?when: DESCRIPTION='ABC'?>
<?VALUE?>
<?end when?><?end choose?>
<?end for-each?>
<?for-each:current-group()?>
<?choose:?><?when: DESCRIPTION='DEF'?>
<?VALUE?>
<?end when?><?end choose?>
<?end for-each?>
<?/DATA/NAMES/MY_NAMES/VALUE?>
<?for-each-group:/DATA/VALUES/MY_VALUES;./A_ID?>
<?for-each:current-group()?>
<?choose:?><?when: DESCRIPTION='ASDFG'?>
<?VALUE?> <---------------- I obtain for this node the '24355' and '10987' values
<?end when?><?end choose?>
I want to know how to obtain only '24355' value, this is, the value for A_ID (/DATA/VALUES/MY_VALUES) = A_ID (/DATA/PARAMETERS/MY_PARAMETERS).
Can someone help me?

CREATE OR REPLACE TRIGGER "TEST_TRG"
   BEFORE UPDATE OF "STATUS"
   ON "TABLE1"
   FOR EACH ROW
BEGIN
   IF (:NEW.status = 'HOLD')
   THEN
      INSERT INTO table2
                  (status
           VALUES (:NEW.status
   END IF;
END;You should learn how to write PL/SQL code.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Do we document BOM information for each item in BR100 for BOM?

Hi,
I'm working on BR100 for BOM. I noticed that in BR100 BOM template there is not a section for the documentation of BOMs for each item. I wonder if the standard is not documenting any of that information in this document?
Thanks a lot,
Robert

Hello Robert,
BR100 explain all setups steps for modules.
BOM for each item is not 'setup' but 'Data Management'.

Java For-each loop to JavaFX for loop

Hi
I have a the following Java for-each loop :
private int w = 250;
private int h = 100;
private int targetPixel[];
private final static int a = 0xff000000;
for (int i=w*h-1;i>=0;i--)
     targetPixel=a;
My problem is since in JavaFX their is no for each loop how do you convert this java for-each loop to a JavaFX loop? Could you please provide me a solution with a sample code.
Thank you.

How to resolve this code to java fx?
int particles = 10;
int textures = 32;
Random rnd =new Random();
IDX particle=new IDX [particles];
for(int i=0;i<particles;i++)
     particle=new IDX (textures*i/particles,rnd);
Here new IDX is a class like the following class IDX
     double x;
     double y;
     double z;
     int xx;
     int yy;
     int index; //Texture index
     public IDX (int textureID,Random rnd)
          x=rnd.nextDouble()*2-1;
          y=rnd.nextDouble()*2-1;
          z=rnd.nextDouble()*2-1;
          index=textureID;
my problem is how do you pass values to a java fx class constructor if javafx class has constructors. please help?
Edited by: R34GTR on May 14, 2009 8:29 AM

HT4859 I own 2 ipods and one ipad, how much space do I have in the icloud? Is it 5G for each product or 5G for all three?

I own 2 ipods and one ipad2, how much space do I have in the cloud? Is it 5G for all three devices?

So, can I use an email for the ipad(which is mine) and a different email for the other 2 ipods(my childrens) and have 5G for each account?

For the last week or three Firefox refreshes two or three times for each refresh, and sometimes for no obvious reason..

For the last week or three Firefox refreshes two or three times for each refresh. Sometimes it refreshes for no obvious reason. For instance, I'll be in the middle of typing into a forum's post block & it refreshes. Or filling out an online form. Or simply viewing a page.

You can check for issues caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Are the "Previews" for each movie a indicator for quality?

I just got my Apple TV today and although I haven't bought any movies from it, I was wondering if when you're viewing a preview/trailer for a movie if that trailer is a good indication of the quality of the film?
I was watching a trailer for "Next Three Days" and it look pretty bad and began to wonder about my purchase.

Ibis Ghost wrote:
My television is a Pioneer Elite Pro Kuro that has been ISF calibrated.
Should not be an issue with the plasma, however do not expect AppleTV to give the best video experience - it cannot match Blu Ray for sheer quality and audio options simply due to the fact that you're using considerably less data for an AppleTV rental (1-1.5GB for SD, 3-4 GB for HD) vs a Blu Ray (up to 25GB of data to play with).
I am quite sensitive on my Panasonic plasmas to the issue of poor gradation in dark/bright scenes with AppleTV where you get discrete dark grey/white bands instead of smooth dark grey>black or near white>full white. While some of this could be my TVs, I found the SD preview for the latest Karate Kid film particularly revealing of the dark banding trait, and I opted to rent the Blu Ray instead which looked fine by comparison in darker scenes.
It may be the AppleTV, but I think it's more likely just lack of detail encoding inherent in the compression methods used. I also notice similar problems when viewing digital terrestrial TV on heavily compressed channels.
AC

Re: Creating comments page or guest book for our wedding website on iweb?

My fiance and I are using iweb to let our wedding guests know about the location of our wedding, things to do, directions, etc. We would like to create a sort of guest book, or comments page, where our guests can send us a message via our website. Is this possible to do in iweb? If so, can someone let me know what the best and easiest way would be to do so? Thanks!

You can also add a free comments page from www.smartgb.com
So far it has worked great with two websites that I have created. You can embed them right into your website. Check out these sites to see how they work on the websites I created:
www.tuckermcelhaney.com
www.olsenbrothers.us
Hope this helps.
Maddawg

LSO: Duplicated Records Created For Each Person During Booking For Course

Similar Messages

Maybe you are looking for