LSO EhP4 - Integration to Atlas
At my present customer location, they are currently using courseware from ATLAS for their training needs.
With LSO implementation, there is a requirement to integrate with ATLAS.
Does anyone have experience integrating LSO with ATLAS?
Hi Pavan,
That sounds amazing, we've been struggling with this issue for a long time, so if we could get it fixed it would be very much apprieciated.
Thanks a lot
Jakob
Send it to
jassn at vestas.com
Similar Messages
-
LSO EHP4 functionality - Appraisals
Hi,
We are in the processing of upgrading to LSO EHP4. I have gone through what is on offer in this Enhancement Pack and stumbled across this one:
Appraisals, Evaluations and Surveys: "An additional user interface has been provided to enable the creation and maintenance of appraisals, evaluations, and surveys based on Web Dynpro ABAP."
We are very interested in this but we're wanting more information on exactly what this does and how it differs from what we currently have. Does it just look different or is there more functionality?
Thank you.
ShaunHi Shaun,
There is no new interface for Level 1 Evaluations. The new interface referred to is a fixed performance appraisal that supports new functionality such as cascading goals and team calibration. You must leverage the SAP form - there is no inherent flexibility, such as there is with the traditional appraisals as the process is predefined.
See this link for more information:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f9/e9a24d36004d959ea6642c3bda21d1/content.htm
You will note a reference to LSO integration. This has to do with the ability to include learning elements (course types) in an appraisal as a part of the performance appraisal. Basically the free enhancement BAdI has been extended for you. These learning elements appear in the Learner's Messages and Notes as Mandatory Training. They may be leveraged with the existing appraisals (rather than the predefined) and the newer development plan functionality as well.
Best regards,
Sharon -
SAP LSO - Time integration; Error Participant not available during course
Dear Gurus,
I have requirement to enable employees to book the course irrespective of the Workshedule he is available in. Please let me know how to acheive it.
Thanks and regards
Saravanan KHello Saravanan,
You have mentioned participant not available during course
the reason for this may be check any future action was done on the participant or check whether the participant is reserved/booked as a trainer on that day.
Time integration will show impact on attendance only.
thanks
rafi -
Hi,
Can anybody tell the name of the report where Attendance hours per day for each employee for the course scheduled can be seen?Try this, S_PH9_46000433 - Attendance List
Hope this helps,
Regi Alex. -
SAP LSO system to XI Integration
Hi Experts,
Currently i am working on SAP LSO system integration with External system(Skill soft) using PI.
Has anyone successfully used standard LSO XI services to integrate with external Learning vendors?Could you please give me the steps or let me know how you implemented the scenario( SAP LSO system--> XI -- > Web service).
Thanks in advance
AnkurHello All,
I am working on a similar scenario of LSO integration with Skillsoft via PI. I have already referred the PDF XI Configuration for SkillSoft Integration.
The flow of interface in my scenario is
Portal(FrontEnd) <-> ECC(BSP Application at Backend) <-> PI <---> External Learning Vendor(SkillSoft).
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) It will be synchronous call.
3 ) From portal user should be able to register, book,Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
4) Portal is the frontend and backend is the BSP application(HCM_Learning).
Can you please let me know the details how to handle this scenario and pass the parameters like customerid, assetid,courseid etc to PI(XI). Also let me know what would be the best approach to follow in this scenario..Is there any BAPI / RFC available for this scenario.
Please guide me how to pass data(like customerid, learnerid...etc) to PI from Once the user clicks to register/book/launch the course
Thanks
Shikha Jain -
Why two Sales order created in CRM 7.0 for every 1 ECC 5.0 sales order ?
Hi all
We had CRM 7.0 system integrated with ECC 5.0 in backend, all related configuration for four document type had been done and following scenarios are working OK
[1] Initial Load of Sales documents from ECC 5.0 does bring correct same sales document in CRM 7.0
[2] Delta Loads (Manual Requests) also brings correct sales document from ECC 5.0
[3] Update of any existing sale document in ECC 5.0 also updated corresponding sales document in CRM 7.0
Only in fourth scenarios, when any new order is created in ECC 5.0 either directly or with reference to Quotation then its bdoc on CRM system create two sales documents of same type in CRM 7.0 system, one in scenario A A by user RFCCRM (defined in RFC connections) and other in scenario BX by user who created order in ECC 5.0
Now our Question is that is this something generic issue with CRM 7.0 and ECC 6.0\ ECC 5.0 or our landscape specific issue
May I request some one to confirm this for us who have ECC 6.0 \ ECC 5.0 \ ECC EHP4 integrated with CRM 7.0 and confirm if they are also getting similiar issue for fourth scenario ?
Regards
Manish JoshiFollow below thread . Looks like similar issue but on ECC.
Re: Delimma on using CRM006 Consumer 5.0 to 7.0 multiple companies -
Business Functions for EHP 4 and EHP 5
Hi Friends,
We are planning to implement LSO, ECM, Travel, PMS and E Recruitment.
What are all the business functions available in EHP4 and EHP5 for these modules.
Please help me with your inputs.
Thanks,
CharleHello Charle,
Following are the business functions available :
HCM_ECM_CI_1 For ECM EHp4
HCM_ECM_CI_2 For ECM EHp5
HCM_ERC_CI_2 For EREC EHp4
HCM_ERC_CI_3 FOR EREC EHP4
HCM_ERC_CI_4 For EREC EHP5
HCM_ERC_SES_1 For Search in EREC
HCM_OSA_CI_1 For Performance Managemt EHP4
HCM_OSA_CI_2 For Performance Managemt EHP5
HCM_LSO_CI_2 For LSO EHP4
HCM_LSO_CI_3 For LSO EHP5
These are BF, which you are looking for, you can get more information on help.sap.com
Best Regards,
Deepak. -
Business Functions For Empty and DSD
Hi
We have installed ECC 6 at one of our client and the client's business is related to Beverage Industry and in order to use the functionalities of Empties and DSD we want to be sure about ECC Business Functions available for the Beverage Industry. Kindly reply with the related Business Functions available and need to be activated for Empties and DSD.
Regards,Hello Charle,
Following are the business functions available :
HCM_ECM_CI_1 For ECM EHp4
HCM_ECM_CI_2 For ECM EHp5
HCM_ERC_CI_2 For EREC EHp4
HCM_ERC_CI_3 FOR EREC EHP4
HCM_ERC_CI_4 For EREC EHP5
HCM_ERC_SES_1 For Search in EREC
HCM_OSA_CI_1 For Performance Managemt EHP4
HCM_OSA_CI_2 For Performance Managemt EHP5
HCM_LSO_CI_2 For LSO EHP4
HCM_LSO_CI_3 For LSO EHP5
These are BF, which you are looking for, you can get more information on help.sap.com
Best Regards,
Deepak. -
Learning Solution Installation (NWSR1)
Dear collegues!
Please provide information concerning components to be installed withing "SAP Learning Solution" implementing.
We have NWSR1 box (with 6.40 core).
In SAPINST
There is Netweaver branch & SAP ERP branch...
What should be choosed to install???
Next step, supposing whould be portal installation... Where this option can be found?
Please help!
Best regards,
VladimirLSOFE is an Add-On that is installed on the SAP ECC system or on
a separate NetWeaver Application Server (stand-alone installation).
So it's up to you what option you prefer...
Starting from ECC 6.0 (NW 7.0) LSO is integrated by default (as addon) in ECC server.
For complete LSO landscape you also need EP with deployed LSO specific business packages... -
SAP LSO - Time Mgmt integration
Hello Gurus
Iu2019m working in a SAP environment where are managed companies in more countries and all companies are using SAP Learning Solution (ECC6.00 EhP4).
We are introducing a new country A, in which is managed company X, having 3 personnel subarea (PS1, PS2, PS3). In country A we are introducing SAP Time Management module too, to be integrated with SAP Learning Solution.
Since PS3 has a different mgmt in Time, we have defined 2 PS groupings, one for PS1 and PS2, and the other for PS3.
For the 2 PS groupings, we customized 2 attendance reasons for training:
0110 u2013 Training as attendee
0111 u2013 Training as instructor
Even if we have 2 different PS grouping, we need to maintain the same coding for absence and attendance reasons.
The integration SAP LSO and Time Mgmt has been activated and itu2019s perfectly working.
Unluckily, the requirement of the company X is to receive automatically attendance records from SAP LSO for the employees belonging to PS1 and PS2, but not to PS3, because all attendances and absences of employees in PS3 are coming via interface from an external system.
We canu2019t filter the 2 attendance reasons coming from this interface, because not all type of training is managed in SAP.
My questions are:
1. Do you know if it is possible to disable the SAP LSO integration for PS3? How can I do that?
2. There will be technical problem for countries not managing Time solution? Will SAP LSO try to send attendance records to Time also for these countries? How can I avoid that?
Many thanks for your help
Regards
Katia
Edited by: Katia Gabrielli on Jan 13, 2010 1:25 PMHi Katia,
You can manage all your business scenarios using BADI (SE18) HRTEM_INT_ZW "HR-TEM: Badi for Integration TEM - Time Management".
Cheers -
Hi All,
We have implemented EHP4 - WD ABAP based appraisals , we have used free enhancement -HRHAP00_ENHANCE_FR11 to get the courses from LSO ( integration) .
Through this badi we are able to see and add all the courses under lso , we have a requirement to restrict some courses which are maked " X" in table HRP1029 this infotype belongs to LSO.
Please share your ideas on this, is this badi linked to - HAP_DOCUMENT_BODY- component -IF_HAP_LSO_COURSES_SEARCH ?
Thanks
KumarI'm not sure this is really a web dynpro abap question. Using the Portal APIs, Web Dynpro ABAP can trigger navigation to any navigation target configured in the Portal. Reading your question, I get the impression that you want to know how to setup a navigation target in the portal for a specific CRMUI application point. This seems more like a CRMUI or Portal question.
-
How to - E-Recruiting ALE-integration step-by-step (EhP4)
Hi everyone,
Can anyone tell me the step-by-step guideline to perform the ALE initial run from SAP HCM to E-Recruiting using transaction PFAL (RHALEINI)??
We are implementing E-Recruiting stand-alone constellation: separate ECC instance integrated with E-Rec via ALE/RFC, enhancement package 4.
We've done some try-outs in the new version, but we lack the certainty that we've done things right.
Please do not refer to note 997181 since it does not explain the details on how to run the initial load. It explains adequately how to set-up the config and very basically how to run PFAL on page 2 (scen. I2-A) and page 4 (up to rel. 6.03)... But it's not sufficient in my opinion... We've done exactly the same...
So what I'm interested in is the right sequence of runs and the selection screen values.
We also have quite a few SLG1 errors which are unclear. Some suggest as if the processing occurs simultaneously (parallel) and blocks the asynchronous processes... Is there a certain number we should enter in the field "number of objects per process"? It's defaulted on 200...
Can anyone shed some light on the best-practice how to run this transaction?
Many thanks in advance!
Miroslav.Hi Medic,
hope u r doing good.
Can u pls chk dese links by Roman,They speak alot on HR_ALE_ER issues.
Re: E-Recruitment Technical Structure ( Attn: Roman Weise)
Re: ALE data transfer from E-recruitment to HCM
Re: E-Recruiting- ALE is working for OM data, but not for internal employees
Re: ALE setting DEV / PROD
Re: ALE Linkage error in E Recruitment
Re: E Recruit 603 - ALE
Re: ALE from HR to E-Recruiting on EhP4
Regards
Rohit.S -
LSO - XI - Skillsoft integration, how to launch external course
Hi Gurus,
I am working on a scenario where we are launching and tracking web based courses (Skill soft a third party).
Let me give you more details of my scenario.
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) We are following this approach - Client Proxy>XI>Web service(SkilSoft) and it will be synchronous call.
3 ) From portal user should be able to Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
For above approch we have copied a class CL_LSO_WS_XI into a custom and modifying its method to launch the course.
Now I need help on how to pass the parameters like customerid, assetid,courseid etc to PI(XI).
If anyone has worked on similar scenario and has reference code or reference material for modifying the method (of class CL_LSO_WS_XI ) to launch the course, please reply.
Thanks in advance.
Akash.Hello All,
I am having similar scenario of LSO integration with Skillsoft via PI. I have already referred the PDF XI Configuration for SkillSoft Integration.
The flow of interface in my scenario is
Portal(FrontEnd) <-> ECC(BSP Application at Backend) <-> PI <---> External Learning Vendor(SkillSoft).
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) It will be synchronous call.
3 ) From portal user should be able to register, book,Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
4) Portal is the frontend and backend is the BSP application(ZHCM_Learning).
Can you please let me know the details how you handled this scenario and passed the parameters like customerid, assetid,courseid etc to PI(XI). Also let me know what would be the best approach to follow in this scenario..Is there any BAPI / RFC available for this scenario or need to go via proxy.
Thanks
Shikha -
LSO - XI - Skillsoft integration, course launching
Hi Gurus,
I am working on a scenario where we are launching and tracking web based courses (Skill soft a third party).
Let me give you more details of my scenario.
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) We are following this approach - Client Proxy>XI>Web service(SkilSoft) and it will be synchronous call.
3 ) From portal user should be able to Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
For above approch we have copied a class CL_LSO_WS_XI into a custom and modifying its method to launch the course.
Now I need help on how to pass the parameters like customerid, assetid,courseid etc to PI(XI).
If anyone has worked on similar scenario and has reference code or reference material for modifying the method (of class CL_LSO_WS_XI ) to launch the course, please reply.
Thanks in advance.
AkashHello All,
I am having similar scenario of LSO integration with Skillsoft via PI. I have already referred the PDF XI Configuration for SkillSoft Integration.
The flow of interface in my scenario is
Portal(FrontEnd) <-> ECC(BSP Application at Backend) <-> PI <---> External Learning Vendor(SkillSoft).
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) It will be synchronous call.
3 ) From portal user should be able to register, book,Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
4) Portal is the frontend and backend is the BSP application(ZHCM_Learning).
Can you please let me know the details how you handled this scenario and passed the parameters like customerid, assetid,courseid etc to PI(XI). Also let me know what would be the best approach to follow in this scenario..Is there any BAPI / RFC available for this scenario or need to go via proxy.
Thanks
Shikha -
LSO - XI - Skillsoft integration, launch course
Hi Gurus,
I am working on a scenario where we are launching and tracking web based courses (Skill soft a third party).
Let me give you more details of my scenario.
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) We are following this approach - Client Proxy>XI>Web service(SkilSoft) and it will be synchronous call.
3 ) From portal user should be able to Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
For above approch we have copied a class CL_LSO_WS_XI into a custom and modifying its method to launch the course.
Now I need help on how to pass the parameters like customerid, assetid,courseid etc to PI(XI).
If anyone has worked on similar scenario and has reference code or reference material for modifying the method (of class CL_LSO_WS_XI ) to launch the course, please reply.
Thanks in advance.
AkashHello All,
I am having similar scenario of LSO integration with Skillsoft via PI. I have already referred the PDF XI Configuration for SkillSoft Integration.
The flow of interface in my scenario is
Portal(FrontEnd) <-> ECC(BSP Application at Backend) <-> PI <---> External Learning Vendor(SkillSoft).
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) It will be synchronous call.
3 ) From portal user should be able to register, book,Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
4) Portal is the frontend and backend is the BSP application(ZHCM_Learning).
Can you please let me know the details how you handled this scenario and passed the parameters like customerid, assetid,courseid etc to PI(XI). Also let me know what would be the best approach to follow in this scenario..Is there any BAPI / RFC available for this scenario or need to go via proxy.
Thanks
Shikha
Maybe you are looking for
-
How can I convert my Web Dynpro Application to Web Dynpro with GP Interface
Hi experts I am trying to make my Web Dynrpo Application implement GP interface. I encountered a question . when I added GP interface controller, "Window" component also added automatically. But I have already had a "Window" componet which contains
-
I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?
-
Hi all Expert I'd like to know is it possible to use this transaction in massive mode (i'm working in release 4.7) or I need to create a program that call this transaction? because now I can only insert 1 record for time and I need to reproduce this
-
Reg:ESS Apprisal document iview in career and job
hi all when i am working with Appraisal document i view which is designed in wdabap application,this is a standard application.the problem here is previously i got an portal run time error,but i resolved this error by changing the system name in prop
-
Why is ResourceContext.getInstance(anonymous) using UserManagementException
First of all, I looked at many many disscusions and other places in the internet. I've found no answer I have to develop a JEE applicaiton which should read the content of a .properties file in the KM-content of the portal. My NWDS is on version 7.3.