LSO-Fee on course/course type

Hi All,
Where do we put course prices for the to appear on the portal we are putting in them on the course type field which brings it across when creating a course date in the back end but is not appearing on the portal?
Regards,
Chandra
Edited by: chandra chandra on Jan 25, 2010 10:21 AM

Hi,
We faced the same problem that even though prices were appearing in the back-end, in the portal it was appearing as free-of-charge.
We traced the authorisation trace and found that the authorisation to display the prices infotype had not been added to PLOG.
After adding the authorisation, the price was available.
Thanks,
Pinki

Similar Messages

LSO 6.00 - hide Course fee and Prebook on Learning portal

Hi
An employee is in continuoud absent and when this employee is booked for a course, system to display error message. I have activated the integration setting and the conflict reaction is set to 'E'. However, system is not triggering the error message.

Hi Divya
Thank you for your reply. Yes, an absence is already maintained for IT 2001.

Course Content Type

Hello All,
We are trying to create Course Types with Delivery Method - Web Based Training. I am not able to create the Course Type as the system asks me for <b>Content Type</b>. I have searched the IMG to find the same, no luck.
Where do we create Content Type? Is this in AE? We have not yet set up AE.
Is there a way to create Content Type if we do not use Authoring Environment.
Please let me know. Highly appreciate any input.
Thanks,
Neelima.

Hello All,
I am new to LSO and just need help in creating content type for wbt course type.
Please help me.
issue is:when i create the course type"wbt" via transaction "pvd0" i have to give the content type(mandatory),but since there is no content type in the system i cant select anything form f4.
Please guide me on this.
Thanks in advance:-).
Best Regards
Swati

LSO - XI - Skillsoft integration, course launching

Hi Gurus,
I am working on a scenario where we are launching and tracking web based courses (Skill soft a third party).
Let me give you more details of my scenario.
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) We are following this approach - Client Proxy>XI>Web service(SkilSoft) and it will be synchronous call.
3 ) From portal user should be able to Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
For above approch we have copied a class CL_LSO_WS_XI into a custom and modifying its method to launch the course.
Now I need help on how to pass the parameters like customerid, assetid,courseid etc to PI(XI).
If anyone has worked on similar scenario and has reference code or reference material for modifying the method (of class CL_LSO_WS_XI ) to launch the course, please reply.
Thanks in advance.
Akash

Hello All,
I am having similar scenario of LSO integration with Skillsoft via PI. I have already referred the PDF XI Configuration for SkillSoft Integration.
The flow of interface in my scenario is
Portal(FrontEnd) <-> ECC(BSP Application at Backend) <-> PI <---> External Learning Vendor(SkillSoft).
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) It will be synchronous call.
3 ) From portal user should be able to register, book,Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
4) Portal is the frontend and backend is the BSP application(ZHCM_Learning).
Can you please let me know the details how you handled this scenario and passed the parameters like customerid, assetid,courseid etc to PI(XI). Also let me know what would be the best approach to follow in this scenario..Is there any BAPI / RFC available for this scenario or need to go via proxy.
Thanks
Shikha

LSO External Users booking courses from Learning Portal !!!

Hi Gurus,
We want external user book a course using LSO. In order to do that, we have created the same user in Portal and R3 (using SSO). This user has related an External Person object "H" using infotype 1032, subtype 0001. The problem comes when this user booked from R3, and thru Portal we are not able to see any course at all..... If the user books from portal, R3 is booked as "US" object instead of "H" object. My questions are:
1. Is this configuration OK ? What else I am missing ?
2. Can results from courses be saved for external user in R3 (H object) ?
3. How can we save final results for external user using Portal ?

Hi Chandra,
Thank you for your information, but is showing courses in portal. The problem comes with external user from portal, when users book a course from Portal, is register (R3) with the object "US" instead of "H" External Person. If we book the user from R3 with object "H" (External user) it does not showing any course in Portal. I believe it has something to do with the BADI (Assignment User ID to Learner)
"In this IMG activity you make the settings required for deriving the learner from the user ID. In the standard system, the user ID is used to find the person, who in turn represents the learner. If the SAP system cannot determine a related person, the user ID is used as the learner. For example, you can determine a business partner or an external person as learners with the help of the user ID and use these in the Learning Portal "
Any ideas???
Regards
David Corté

SAP HR LSO: Removed fields on course (Object E)

Dear all,
When booking a Course in LSO there the section (with fields) called the "price and cost assignment". We would like to remove this from the Course. Would anyone know if it is possible to remove this, and how?
We would also like to remove the field "tutor".
Thanks for your help!

Hi Brosimba,
You can customize the BSP application for the learner portal by copying the BSP application (HCM_LEARNING) to a Z-variant. In there, you can modify the screens you want.
Afterwards, you can link you z-pages into the original learner portal via customizing view LSPAGE_ALIAS_C
The entry point for the application remains in the original application HCM_LEARNING.
Best regards,
Luk

SAP LSO impart qualification on course program block

Hello,
I am trying to solve a problem with course programs. As you know you can create course blocks within a program. What I want to do is have qualifications imparted on the completion of each block. Unfortunately, the "follow-up" process that imparts qualifications is done only on the completion of the entire course program. Does anybody know of a Badi or user exit - or any solution - that will allow me to impart a qualification upon completion of a course block?

Hi Ben,
Does your course block have a required sequence to it? If so, perhaps you could impart the qual based on completion of the last course type within the course block as a workaround...

How to Create LSO Follow Up after Course Creation adn Booking.

Dear All,
I Created a Course and Booking to the attendants is done.
I want to follow up the attendants Pass / Fail and i have to update their Proficiency.
I am unable to do it through BDC.
I am using LSO_PV15 T-Code.
Could any one suggest the process of doing so.
Regards,
Chaitanya Abbu.

Hi,
Check function modules LSO*FOLLOWUP. There are 2 function modules which seem to be useful.
LSO_FOLLOWUP
LSO_UPDATE_FOLLOWUP
Thanks,
Jyothi

Course program: meaning of validity period of course/curriculum type

Hello,
After the installation of enhancement pack 4, we noticed some new columns in the course program block for course and curriculum types: validity period and alternatives.
Can someone explain to me the (functional) meaning of these fields (maybe with an example)? I can't find anything in the SAP documentation about this.
Many thanks in advance!

bump

LSO:Defaulting language on Course Content Static IT5003

When creating a course type, using delivery method Virtual Classroom, client would like to default the language to English when creating IT5003 (Course Content Static).
I haven't found a way to do this via IMG config. Is this possible through config? Is there another way to default the language on this infotype without modifying the system?

Hi Gary,
Are you saying that when a training admin is creating a course type and IT 5003, that particular IT is not presently appearing in English?
By default, when you initially log on you can choose your logon language therefore that IT should already be in English as with every other IT.
Not exactly sure what is the issue your are having. Can you explain a little bit more?
Danielle

LSO System Performance and Course Completion

We have been encountering issues with users receiving only a 50% course completion in LSO 3.0 for web-based course. We are attempting to determine the trend and root cause-- it appears, for example, that a user successfully completes one course at 100%, immediately books and attends a second web-based course; successfully completing the second course and passing the test. For the second course, the user receives only a 50% completion. This has occurred to at least 200 employees over the last 3 weeks. Has anyone else encountered this issue? If so - what did you find. Do you have any ideas for us to assist with troubleshooting?

Hi Sherry,
The most common case where I see 50% completion in LSO 300 is the scenario which involves WBT + a final test. When setup correctly, this would involve: (1) creating one learning objective, assigning it to the learning net (with "attainable" unchecked), but also assigning the learning objective to the item group of the final test, and (2) defining up the Course Specifications infotype to have learner complete 100% of learning objectives AND 100% of learning objects. Where we have encountered problems before is that an author either forgets to assign the learning objective at the item group level of the test, so the learner never attains the learning objective. As a result, they are sitting with 100% of the learning objects met, but 0% of the learning objectives met, resulting in an overall completion percentage of 50%.
So...perhaps there was a problem with the setup of the course (either initially or when it was versioned) that is causing the problem.
It not clear from your attachment whether all learners have received 50% completion, or just some of them, but it wouldn't seem possible that the system is behaving differently for different learners, unless it could be traced back to some versioning activity.
Not sure if this is your situation, but take a look and see if this is your problem.
Regards,
Gary

I want to certificate course course details

Hi,
I am a new student in java.
I want to know certificate course details.
which one is the best certificate for beginners?
Please let me know.
Thank,
K.S.Kumar

hey Senthil
For Java basic certification course is SCJP. This is necessary certificate for the eligibility to appear for other higher level certificates. Its fees is around 200 USD. It covers java basics only.
If u required ne course material than search it on google or do mail me at [email protected]
Best of Luck!!!

LSO Create Course Links link types (restrict link types)

Hi all,
a question to pose for some of those IMG gurus out there!
We are implementing LSO (and its Portal front-end) and a requirement to 'limit the course link types available to users' has cropped up.
Specifically, what we're trying to achieve is the following:
1. Course Admin runs 'Create or Change Course'
2. After selecting the location, etc, the admin clicks on the Links tab to add links to the course
3. A list of predefined links (inherited from the course type) are already listed. User clicks 'Add' to add some more.
4. A pop up appears. Here you may select the Link Type. Our choices are 'Web Link' (i1061) and 'Collaboration Room' (i5045).
We only want 'Web Link' to appear in the drop-down list of Link Type options. Short of enhancements to strip out the values is there a means of manipulating the Link Types available to a user when they add Links to a new Course? This is where I'm hoping a config activity is available in IMG. It may be that because the Course infty and Web Link/Collaboration Room infty are related, we can't do this, but I'll pose the question anyway as it is (so far proved to be!) a tricky one.
Many thanks for any advice; points for assistance.
Hagen

I do not paste images from clipboard (I consider it bad practice) but I have clients who do.
In my experience InDesign does not lower the resolution, but the pasted image is RGB. That and the fact that it doesn't show up in the links is why I don't like it.
Are there any other link types? It seems like this would be a type (if it showed up in links panel), since it is not really imported.
The only way I know to make them links is copy, paste into blank Photoshop, save that then place that into InDesign. This is easy to do, but finding all these pasted graphics can be time consuming, since they are not in links list.
This would apply to raster images only, since pasted vector art converts to the native InDesign platform.

Course catalog problem - LSO

Hi All,
We are facing strange problem in LSO in displaying the course catalog properly for all users.
We are using mySAPERP 2005 (ECC 6.0) SP11. LSO 600 FE,
We are using structural authorization profiles in the R/3. The catalog was displaying the catalog properly before 2 days back.
Now, for some reasons few of the users having the problems in accessing the course catalog (catalog doesn't show most of course groups, course type, and course).
It skips some of the course groups, course types, and course.
Anybody has an idea what is the problem ? Appreciate your help in this regards.
Note : I correctly maitained the catalog in R/3 by choosing/checking subject area infotype for every topmost course groups.
Looking forward to your responses.
Regards,
Anil Kumar

Hi Markus,
Thank you very much for your reply. Figured out the problem, as you said the subject area inoftype flag is not being checked.
But, to my strange I am not able to figure it out why it has happened ?
Why the flag is being removed automatically even though I have done these settings and saved it properly in production server 1 month back ?
This happened in quality server too, for initial 15 days, it was shown properly and then....the same problem has started with the course catalog in quality server also ?
Why this kind of inconsistent behaviour ?
Is it the problem with any of TR's movements to Qual, and then to production server ?
Also, we have maintained the structural authorizations correctly in oosb and oosp tcode of backend ECC.
Please share your experiences.
Thanks for your time,
Anil Kumar

How to restrict who can book a course in LSO 600?

We are using LSO 600. Is there a way to restrict only certain employees within an org to be able to book a course? I was thinking there may be a relationship that I can add at the course type or course so only one org can book the course. The desired end result will display an error message if someone outside of the org tries to book the course. Thanks.

Our requirement was to restrict employees based on employee group,.i.e., management, non management, external/contractor, affiliated etc... we created relationship(033) in hrp1001 between target group otype = 91 id = different id's for each group that i mentioned above.. to discipline/subdiscipline/coursetype etc.. In the login we classify these employees and in the initialization event of navigation/trainingtype.. call an RFC function module which will return all the discipline,subdiscipline, coursetypes etc... then just filter the discipline,subdiscipline returned by standard LSO function modules . It works perfectly fine.. if a contractor logs in and we navigate thru pages .. it will not display courses that they have no access based on relationship that we set in the backend.. for employees we gave full access etc..
sample code..
IF application->learnertype = 'P' OR application->learnertype = 'PT'.
*==get from cookie course type
    CALL METHOD application->get_server_cookie
      EXPORTING
        im_relax = 'X'
        im_name = 'LSO_RESTRICT_D'
      IMPORTING
        ex_data = d_restrict[].
*== if no restriction found, expired cookie.
    IF d_restrict[] IS INITIAL.
*== Get restriction for course group/type.
      CALL FUNCTION 'ZLEARNER_RESTRICTION'
        DESTINATION application->rfc_destination
        EXPORTING
          learner_attuid = sy-uname
        TABLES
          d_restrict     = d_restrict ( Coursetype)
          l_restrict     = l_restrict ( Course group)
        EXCEPTIONS
          not_found      = 1
          OTHERS         = 2.
*==Set restrictions to cookie coursetype.
      CALL METHOD application->set_server_cookie
        EXPORTING
          im_relax = 'X'
          im_name = 'LSO_RESTRICT_D'
          im_data = d_restrict[].
    ENDIF.
*== IF no restriction found for coursetypes, should not display coursestypes
    SORT d_restrict BY objid.
    IF d_restrict[] IS NOT INITIAL.
*==Get restriction for affiliate employee.
      READ TABLE d_restrict TRANSPORTING NO FIELDS
                    WITH KEY objid = trainingtype-objid
                    BINARY SEARCH.
      IF sy-subrc <> 0.
        CLEAR ls_return.
        CALL FUNCTION 'ZBALW_BAPIRETURN_GET2'
          DESTINATION application->rfc_destination
          EXPORTING
            type   = 'E'
            cl     = 'ZP'
            number = '945'
          IMPORTING
            return = ls_return.
        APPEND ls_return TO err_message.
      ENDIF.
    ENDIF.
ENDIF.

LSO-Fee on course/course type

Similar Messages

Maybe you are looking for