LSO - Issue with Factory calendar End Year and creation of New courses

Hi,
Recently we are experiencing an Issue in LSO with the system hanging while creation of "Course with Resources".
Upon Analysis we identified that while creating course with resources and by checking "Period without Days off" option references the set factory calendar in LSO config and since this set Factory Calendar has an End Year in 2005, the system hangs trying to reference this factory calendar.
For some course types we are unable to even enter the course creation Data screen. These course types have " Main schedule" (with / without pattern) pre defined.
The issue does not seem to occur if we extend the factory calendar to current period or future.
Please let me know if anybody has faced this issue, if extending the factory calendar the right solution and what is the impact of exteding a factory calendar in HR module. Is the factory calendar referenced anywhere else in HR module?
Note: in LSO config you can set the factory calendar in Training and Event Management>SAP Learning Solution>Training Management>Basic settings>Control Options for Days Off,
Regards
Edited by: Abhihek Gangatkar on Sep 26, 2011 12:25 PM

We found the problem,
We had to add a numeric and /or a special charachter in the password

Similar Messages

Issue with Check in of template or creation of new site connection issue...

Hi all, when ever i am trying to check in a new template through Dynamic converter or else, try to create a new site connection through site designer, i am getting the below error message, can anyone please let me know whats needs to be done to get this issue resolved.....
Content Server Request Failed
Unable to execute service DC_CHECKIN_NEW and function Imeta.
(System Error: Unable to execute query 'Imeta(insert into DocMeta (dID, xComments, xCpdIsTemplateEnabled, xCpdIsLocked, xReadOnly, xHidden, xCollectionID, xInhibitUpdate, xTrashDeleter, xTrashDeleteLoc, xTrashDeleteName, xTrashDeleteDate, xForceFolderSecurity, xDiscussionCount, xDiscussionType, xPartitionId, xWebFlag, xStorageRule, xWebsiteObjectType, xTemplateType, xWebsites, xDontShowInListsForWebsites, xWebsiteSection) values(13, '', 0, 0, 'FALSE', 'FALSE', 0, 'FALSE', '', 0, '', null, 'FALSE', 0, 'N/A', '', '', '', '', 'GUI Template', '', '', ''))'. ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE)
Thanks & Regards,
Prashant.

Found this on metalink: NOTE:737470.1
Cause:
"This is caused by zone indexed fields that were created outside of the Content Server interface. Dropping and recreating the zoned index fields should resolve the issue."
To implement the solution, please execute the following steps:
Log in to the Content Server through the browser as sysadmin.
Navigate to Administration -> Zone Fields Configuration.
On this page, change the value of the search engine in the dropdown list to DatabaseFullText if database full text indexing is being used. Leave it set to Database if database metadata only indexing is being used.
If there are fields listed in the left-hand box (Zone Text Fields):
Make a note of all the fields listed in the left-hand box (Zone Text Fields), or take a screenshot of this page.
Remove all of the fields from the Zone Text Fields box by highlighting each field and clicking the right arrow.
Click the Update button.
Run the following query directly against the database to see if any zoned fields are still present. The zoned fields can be identified by the ZFT suffix, for example, DDOCTITLE_REVISIONS_ZFT:
Select index_name from user_indexes where table_name = 'REVISIONS';
If any indexes with the ZFT suffix are returned in the results as an index, drop that index from the Revisions table in the database.
Verify that the error no longer appears.
Re-add any desired zoned field indexes through the Administration -> Zone Fields Configuration page.

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

adamboettiger wrote:
Sophos and MacKeeper
There are many reported problems with both these programs.
Run through this list of fixes in order, will tune you right up.
They are in order for a reason.
..Step by Step to fix your Mac

Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

Hi. I work in an enterprise environment that is currently migrating to 64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working." I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
I'll ping some folks about the error you are getting. . .
hth,
Ben

HT4623 iOS 8 version 8.1.2 issues with the calendar displaying wrong TIME ZONE!

I just updated to iOS 8 using version 8.1.2 and am having issues with the calendar. I use my GMAIL calendar and sync to my iPhone and now any calendar entries that I add from my phone display the current time zone AND GMT time. Entries that were already there display correctly. New entries entered from the GMAIL calendar also display correctly. The issue is with NEW entries entered on my PHONE into the calendar. This is very annoying and causes problems for new entries that need EDITED. Once opened to edit it defaults to GMT time! WRONG!! I have turned off the automatic time zone feature and Time Zone Override in Settings but it's still WRONG! There are multiple reports of this online so I would like to know when/if it will be corrected or if there is a fix! Please help!!

Quite the same problem here, GMT, UTC.......
Why when they do an update they don't check it completely???

OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.
Everything works perfectly previously on 10.8.4 and 10.8.5. I did not test on 10.9.0 as I went straight to 10.9.1. Anyone else having this problem? Any thoughts on resolution?

OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
Hope this helps if anyone has a similar issue

Has anyone had issues with the calendar dropping appointments?

Has anyone had issues with the calendar dropping appointments?

sackster77 wrote:
{snip}. . .Has anyone else had this issue?
Answering this question will not help your issue. You need to take the iPhone to the nearest Genius Bar. That's the only solution that will reach an affirmative result.
http://www.apple.com/retail/locator/

Are there any issues with using OS X Mavericks and Premiere CC?

Are there any issues with using OS X Mavericks and Premiere CC?

Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Peter Garaway
Adobe
Premiere Pro

Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
"Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
Any other ideas?
EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it. I'm on Mavericks 10.9.5.

one obstacle, quickly removed. thank you.
nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

If I buy Creative Cloud subscription for a year and get a new computer in that year, is it transferable?

If I buy Creative Cloud subscription for a year and get a new computer in that year, is it transferable?

You can install on any 2 computer, suppose you have 2 computers already activated with creative cloud, Now if you would like to activate it on a 3rd computer then you have to deactivate from anyone of the previous 2 computer and activate it on the 3rd computer. So totally you can have creative cloud apps in 2 computer.
You can refer the below link for activation and deactivation help.
Activation & Deactivation Help

Does a factory reset delete all and make the new copy of OS completely fresh?

Hi all, so I forgot my book's passcode and I reset it from the Recovery mode. All is fine, but I was wondering does a factory reset delete all and make the new copy of OS completely fresh? All the chains, registries and all, just like a fresh copy of Windows ? Or did I mixed up all...
P.S. Strange after the factory reset and the system's downloading I got this as apps (of course some are downloaded by me)

does a factory reset delete all and make the new copy of OS completely fresh?
Actually, the "delete all" part is done by your using Disk Utility to erase the partition, as part of your clean install.

How deactivate SAP* after inital logon and creation of new users

Pl help me to deactivate SAP* after inital logon and creation of new users.
Regards
Jyotirmoy

Hi,
log on (as sap* to the portal) and navigate to system administration --> system configuration --> user management configuration --> data sources.
There you should find a dialog for (de-)activating sap*.
note that the navigation path could be slightly different (my portal ist set to german, so I translated the path on my own).
Regards,
Dominik

Sync, restore, and issue with Google Calendar

I have several problems: I somehow lost my data prior to Jan1, 08 on my BB 8703 sometime after syncing with Google Calendar (may be completely coincidental). Now I have a dilemma I have a backup from a couple of weeks ago but I don't want to lose all of the new data I've put in lately.
How do I add in the data from the last few years back into my BB? How can I save what I have now? Can I sync with the Google calendar? 2 way? one way? do I sync from before or after I restore?
I'm very confused and worried about permanently losing my data.

There is a brilliant little App called 'Spanning Sync' which does just that! It syncs your iCal to your Google calendar and it is very easy to set up and use. However, it only lets you sync with one Google account per licence. If you need to sync to more than one Google account, you need to buy more licences. I use it very successfully and would recommend it to you without reservation.
http://spanningsync.com/

LSO - Issue with Factory calendar End Year and creation of New courses

Similar Messages

Maybe you are looking for