LSO - Recording Attendance in IT 2002 for Class Room Training.

Dear Expert,
We had implemented LSO some time ago.
Once class room training is booked, Attendace is not recording in IT 2002.
Please let us know what are settings, we need to do to record the attendance in IT 2002 once the course is booked from back end or through portal by the user.
Regards
Badarinarayana

Thx a lot Noobie for the info.
Its getting updated in IT2002 now.
However, what ever timings got maintained in schedule are getting reflected in IT 2002
Suppose, course is schedule for 6 hours with lunch break. Schedule is maintainted accordingly with lunch break.
In IT2002, the timings are getting reflected exactly whatever we mentioned against schedule in course -- schedule.
Ours is positive time management, Hence, it attracts salary deduction if any deviation in IT 2002.
Though schedule is maintainted, how to maintain default timings of 8.5 hours for booked course against employee for that day without refering scheduled timings.
Please suggest me how to go about in this case.
regards
Badarinarayana

Similar Messages

All functions in FUNCLIB record can be moved to Application Class?

I am new comer for PeopleCode. I find many functions are put into a work record, like FUNCLIB. I want to know if some logics only are able to be coded in work record as function due to some restrictions or convenience. If yes, what are the restrictions and conveniences? If not, any one function in one record can be moved to Application Class? Please help to answer. Thanks in advance.

My two cents on this is that the FUNCLIB_ convention is a legacy convention, which was rolled out prior to the existence of application packages. As one can imagine, there is a large effort involved in pulling out FUNCLIB_ code and re-directing all of the calls to application classes.
I work with application classes where possible; there are nice OOP features and things are more tightly defined e.g. you can't just define a bunch of variables and have the '&randomstring is auto-defined' messages appear during PC validation in an App Class.
If you are writing something new, then I would encourage you to use application packages and classes. If you are thinking of re-writing code that exists in a FUNCLIB record event, then you will just need to ensure that you've identified all the calls and so on.
Hope this helps
John

Characteristics for class type 001 and class 59111 - Message Re-phrased

Hi All,
Let me put in better words.
The requirement is to get the list of Characteristics that are associated with a particular Class type and Class that would be entered by the user in selection screen. I have used KLAH and KSML to establish the link and got the relevant characteristics list configured. It worked for me for most of the Class type and Class combination.
The issue is on particular class type 001 and class 59111, if I put a lookup in KSML, I don't get any records. But if we look in the configuration CL02 for the same Class type 001 and class 59111, I see a list of characteristics configured there.
Does anyone know how to fetch the characteristics on this particular case?
Thanks
Rajesh.
Edited by: Rajesh Kumar K on Jan 12, 2012 12:12 PM

Hi Sylendra,
Thanks for looking into it and replying with your thoughts.
What you have mentioned about the approach on getting the characteristcs from KLAH and KSML is exactly how I have written in my program. Ofcourse your second statement of going into AUSP to get the values for characteristics for an Object (eg: material number XXXX) is also correct.
But my issue is still on getting the relevant characteristics for the class tyoe 001 and class 59111. I need to display to user the relevant characteristics that are configured for Class type 001 and class 59111. But when I go into KSML passing the internal class number and class type, I don't get any records. If you see, I am not searching characteristic values for an object, I am searching for characteristics itself.
The question would be, why records are not maintained in KSML for class 59111 (though they show in CL03) . or there are any other tables to read characteristics...
Thanks
Rajesh.

Cannot obtain an appropriate JDBC type for class char.

The above error while deploying...The full error is below. The only datatypes used are: integer, timestamp,string, decimal and date (so no char). Can anybody help?
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/SAPAS12013.. Reason: Cannot obtain an appropriate JDBC type for class char. To store the field with this class in the database, the class must implement java.io.Serializable.; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.ejb.exceptions.deployment.EJBDeploymentException: Cannot obtain an appropriate JDBC type for class char. To store the field with this class in the database, the class must implement java.io.Serializable.
at com.sap.engine.services.ejb.deploy.tools.sql.Mappings.getDefaultSqlTypeForJavaType(Mappings.java:131)
at com.sap.engine.services.ejb.deploy.xml.CMPParser.fillCmpFieldInfo(CMPParser.java:89)
at com.sap.engine.services.ejb.deploy.xml.CMPParser.parseCMPFields(CMPParser.java:644)
at com.sap.engine.services.ejb.deploy.xml.CMPParser.parseFields(CMPParser.java:121)
at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:173)
at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:97)
at com.sap.engine.services.ejb.deploy.DeployAdmin.parseSingleJar(DeployAdmin.java:296)
at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:246)
at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2118)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:594)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:379)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:296)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:290)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:323)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3033)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:463)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)

Hi Ashley,
And yet, apparently you have a cmp-field with type <b>char</b> in one of your CMP entity beans. This is not supported. Please refer to the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/13/dbb2b66146934a9662918755038ea1/frameset.htm">Object/Relational Mapping Rules</a> and especially to the first bullet under the table.
Hope that helps!
Vladimir

Use OBJCLASS object of Emigall for Class & characteristics creation in FL

Hi Fritz,
Good day,
I want to use OBJCLASS object of Emigall for
Class and characteristics cration of Functional Location, The object is
desiged for Equipment only,
I read the document of this object which says
that it can be modify to use for functional location as well by changing
some rule, I tried by changing the field "Name of database table for
object" from the standard which is made for DEVICE/EQUIPMENT
I need your help to modify the rule to use this object for class and
characterstic creation for Functional Location, the migration object field is set to Device
which I want to change to FUNCLOC but that field is not modifiable.
Can you help me Fritz
Regards,
Robert

Robert,
Yes you are right. The following changes have to be made:
HEADER-OBJECT_TYPE need to be set to IFLOT (Fixed Value or Transfer field rule)
DATA-FIELD need to be set to TPLNR (Fixed Value or Transfer field rule)
DATA-VALUE need to be set to either CONNOBJ or DEVLOC (Via KSM field rule)
Kind regards,
Fritz

SQL Query for mapping a set of batches to a class rooms group

Hi All,
I am using Oracle 11g Release 2 database.
I have the following data set:
ClassRooms
ClassId ClassName                    Capacity     Group
1 Babbage/Software Engg Lab          24          1
2     Basement - PG Block               63          1
3     Classroom 1                    56          1
4     Classroom 10                    24          1
5     Classroom 11                    24          1
6     Classroom 12                    35          1
7     Classroom 13                    42          1
8     Classroom 14                    42          1
9     Classroom 15                    42          1
10     Classroom 2                    35          1
11     Classroom 3                    35          1
12     Classroom 4                     35          1
13     Classroom 5                    35          1
14     Classroom 6                    25          1
15     Classroom 7                    25          1
16     Classroom 8                    24          1
17     Classroom 9                    24          1
18     Control Sys Lab                    24          1
19     Dig & Embd Sys Lab               20          1
20     DSP & Comm Lab                    20          1
21     Electromechanical System Lab     28          1
22     Farabi/Web Tech Lab               36          1
23     Gen Purpose Lab                    40          1
24     Shirazi/DB Tech Lab               36          1
25     Adv Elect Lab                    30          2
26     Classroom 16                    42          2
27     Classroom 17                    49          2
28     Classroom 18                    56          2
29     Classroom 19                    42          2
30     Classroom 20                    49          2
31     Classroom 21                    35          3
32     Classroom 22                    35          3
33     MDA Lab                         20          3
DegreeBatches
BatchId      BatchName Strength
1          BIT-11          79
2          BIT-12          28
3          BS(CS)-1          35
4          BS(CS)-2          78
5          BE(SE)-1          69
6          BE(SE)-2          84
7          BE(SE)-3          64
8          BICSE-7          84
9          BICSE-8          43
10          BEE-1          112
11          BEE-2          151
12          BEE-3          157
13          BEE-4          157
I want to map a degree batch combination to a class rooms group in such away that they fully utilize maximum capacity of the class rooms within a group (Ideal case) or as close to it as possible. Can it be done with a SQL query?
Any response will be highly appreciated.
SQL Scripts to generate the required tables and populate data is below:
CREATE TABLE ClassRooms (ClassId NUMBER, ClassName     VARCHAR2(50), Capacity NUMBER, Group NUMBER);
INSERT INTO ClassRooms VALUES(1,'Babbage/Software Engg Lab',24,1);
INSERT INTO ClassRooms VALUES(2,'Basement - PG Block',63,1);
INSERT INTO ClassRooms VALUES(3,'Classroom 1',56,1);
INSERT INTO ClassRooms VALUES(4,'Classroom 10',24,1);
INSERT INTO ClassRooms VALUES(5,'Classroom 11',24,1);
INSERT INTO ClassRooms VALUES(6,'Classroom 12',35,1);
INSERT INTO ClassRooms VALUES(7,'Classroom 13',42,1);
INSERT INTO ClassRooms VALUES(8,'Classroom 14',42,1);
INSERT INTO ClassRooms VALUES(9,'Classroom 15',42,1);
INSERT INTO ClassRooms VALUES(10,'Classroom 2',35,1);
INSERT INTO ClassRooms VALUES(11,'Classroom 3',35,1);
INSERT INTO ClassRooms VALUES(12,'Classroom 4',35,1);
INSERT INTO ClassRooms VALUES(13,'Classroom 5',35,1);
INSERT INTO ClassRooms VALUES(14,'Classroom 6',25,1);
INSERT INTO ClassRooms VALUES(15,'Classroom 7',25,1);
INSERT INTO ClassRooms VALUES(16,'Classroom 8',24,1);
INSERT INTO ClassRooms VALUES(17,'Classroom 9',24,1);
INSERT INTO ClassRooms VALUES(18,'Control Sys Lab',24,1);
INSERT INTO ClassRooms VALUES(19,'Dig & Embd Sys Lab',20,1);
INSERT INTO ClassRooms VALUES(20,'DSP & Comm Lab',20,1);
INSERT INTO ClassRooms VALUES(21,'Electromechanical System Lab',28,1);
INSERT INTO ClassRooms VALUES(22,'Farabi/Web Tech Lab',36,1);
INSERT INTO ClassRooms VALUES(23,'Gen Purpose Lab',40,1);
INSERT INTO ClassRooms VALUES(24,'Shirazi/DB Tech Lab',36,1);
INSERT INTO ClassRooms VALUES(25,'Adv Elect Lab',30,2);
INSERT INTO ClassRooms VALUES(26,'Classroom 16',42,2);
INSERT INTO ClassRooms VALUES(27,'Classroom 17',49,2);
INSERT INTO ClassRooms VALUES(28,'Classroom 18',56,2);
INSERT INTO ClassRooms VALUES(29,'Classroom 19',42,2);
INSERT INTO ClassRooms VALUES(30,'Classroom 20',49,2);
INSERT INTO ClassRooms VALUES(31,'Classroom 21',35,3);
INSERT INTO ClassRooms VALUES(32,'Classroom 22',35,3);
INSERT INTO ClassRooms VALUES(33,'MDA Lab',20,3);
CREATE TABLE DegreeBatches (BatchId NUMBER, BatchName VARCHAR2(50), Strength NUMBER);
INSERT INTO DegreeBatches VALUES(1,'BIT-11',79);
INSERT INTO DegreeBatches VALUES(2,'BIT-12',28);
INSERT INTO DegreeBatches VALUES(3,'BS(CS)-1',35);
INSERT INTO DegreeBatches VALUES(4,'BS(CS)-2',78);
INSERT INTO DegreeBatches VALUES(5,'BE(SE)-1',69);
INSERT INTO DegreeBatches VALUES(6,'BE(SE)-2',84);
INSERT INTO DegreeBatches VALUES(7,'BE(SE)-3',64);
INSERT INTO DegreeBatches VALUES(8,'BICSE-7',84);
INSERT INTO DegreeBatches VALUES(9,'BICSE-8',43);
INSERT INTO DegreeBatches VALUES(10,'BEE-1',112);
INSERT INTO DegreeBatches VALUES(11,'BEE-2',151);
INSERT INTO DegreeBatches VALUES(12,'BEE-3',157);
INSERT INTO DegreeBatches VALUES(13,'BEE-4',157);
Best Regards
Bilal
Edited by: Bilal on 27-Dec-2012 09:52
Edited by: Bilal on 27-Dec-2012 10:07

Bilal, thanks for the nice problem! Another possibility for duplicate checking is to write a small PL/SQL function returning 1 if a duplicate id is found, then equate it to 0: 'Duplicate_Token_Found (p_str_main VARCHAR2, p_str_trial VARCHAR2) RETURN NUMBER'. This would parse the second string and might use p_str_main LIKE '%,' || l_id || ',%' for each id. Anyway the full query (without that) is given below:
Solution with names
SQL> WITH rsf_itm (con_id, max_weight, nxt_id, lev, tot_weight, tot_profit, path, root_id, lev_1_id) AS (
2 SELECT c.id,
3         c.max_weight,
4         i.id,
5         0,
6         i.item_weight,
7         i.item_profit,
8         ',' || i.id || ',',
9         i.id,
10         0
11    FROM items i
12   CROSS JOIN containers c
13   UNION ALL
14 SELECT r.con_id,
15         r.max_weight,
16         i.id,
17         r.lev + 1,
18         r.tot_weight + i.item_weight,
19         r.tot_profit + i.item_profit,
20         r.path || i.id || ',',
21         r.root_id,
22         CASE WHEN r.lev = 0 THEN i.id ELSE r.nxt_id END
23    FROM rsf_itm r
24    JOIN items i
25      ON i.id > r.nxt_id
26     AND r.tot_weight + i.item_weight <= r.max_weight
27   ORDER BY 1, 2
28 ) SEARCH DEPTH FIRST BY nxt_id SET line_no
29 , rsf_con (nxt_con_id, nxt_line_no, con_path, itm_path, tot_weight, tot_profit, lev) AS (
30 SELECT con_id,
31         line_no,
32         To_Char(con_id),
33         ':' || con_id || '-' || (lev + 1) || ':' || path,
34         tot_weight,
35         tot_profit,
36         0
37    FROM rsf_itm
38   UNION ALL
39 SELECT r_i.con_id,
40         r_i.line_no,
41         r_c.con_path || ',' || r_i.con_id,
42         r_c.itm_path || ':' || r_i.con_id || '-' || (r_i.lev + 1) || ':' || r_i.path,
43         r_c.tot_weight + r_i.tot_weight,
44         r_c.tot_profit + r_i.tot_profit,
45         r_c.lev + 1
46    FROM rsf_con r_c
47    JOIN rsf_itm r_i
48      ON r_i.con_id > r_c.nxt_con_id
49   WHERE r_c.itm_path NOT LIKE '%,' || r_i.root_id || ',%'
50     AND r_c.itm_path NOT LIKE '%,' || r_i.lev_1_id || ',%'
51     AND r_c.itm_path NOT LIKE '%,' || r_i.nxt_id || ',%'
52 )
53 , paths_ranked AS (
54 SELECT itm_path || ':' itm_path, tot_weight, tot_profit, lev + 1 n_cons,
55         Rank () OVER (ORDER BY tot_profit DESC) rnk,
56         Row_Number () OVER (ORDER BY tot_profit DESC) sol_id
57    FROM rsf_con
58 ), best_paths AS (
59 SELECT itm_path, tot_weight, tot_profit, n_cons, sol_id
60    FROM paths_ranked
61   WHERE rnk = 1
62 ), row_gen AS (
63 SELECT LEVEL lev
64    FROM DUAL
65 CONNECT BY LEVEL <= (SELECT Count(*) FROM items)
66 ), con_v AS (
67 SELECT b.itm_path, r.lev con_ind, b.sol_id, b.tot_weight, b.tot_profit,
68          Substr (b.itm_path, Instr (b.itm_path, ':', 1, 2*r.lev - 1) + 1,
69            Instr (b.itm_path, ':', 1, 2*r.lev) - Instr (b.itm_path, ':', 1, 2*r.lev - 1) - 1)
70             con_nit_id,
71          Substr (b.itm_path, Instr (b.itm_path, ':', 1, 2*r.lev) + 1,
72            Instr (b.itm_path, ':', 1, 2*r.lev + 1) - Instr (b.itm_path, ':', 1, 2*r.lev) - 1)
73             itm_str
74    FROM best_paths b
75    JOIN row_gen r
76      ON r.lev <= b.n_cons
77 ), con_split AS (
78 SELECT itm_path, con_ind, sol_id, tot_weight, tot_profit,
79         Substr (con_nit_id, 1, Instr (con_nit_id, '-', 1) - 1) con_id,
80         Substr (con_nit_id, Instr (con_nit_id, '-', 1) + 1) n_items,
81         itm_str
82    FROM con_v
83 ), itm_v AS (
84 SELECT c.itm_path, c.con_ind, c.sol_id, c.con_id, c.tot_weight, c.tot_profit,
85          Substr (c.itm_str, Instr (c.itm_str, ',', 1, r.lev) + 1,
86            Instr (c.itm_str, ',', 1, r.lev + 1) - Instr (c.itm_str, ',', 1, r.lev) - 1)
87             itm_id
88    FROM con_split c
89    JOIN row_gen r
90      ON r.lev <= c.n_items
91 )
92 SELECT v.sol_id,
93         v.tot_weight s_wt, v.tot_profit s_pr, c.id c_id, c.name c_name, c.max_weight m_wt,
94         Sum (i.item_weight) OVER (PARTITION BY v.sol_id, c.id) c_wt,
95         i.id i_id, i.name i_name, i.item_weight i_wt, i.item_profit i_pr
96    FROM itm_v v
97    JOIN containers c
98      ON c.id = To_Number (v.con_id)
99    JOIN items i
100      ON i.id = To_Number (v.itm_id)
101   ORDER BY sol_id, con_id, itm_id
102 /
    SOL_ID S_WT S_PR C_ID C_NAME          M_WT C_WT I_ID I_NAME     I_WT I_PR
         1 255 255     1 SEECS UG Block   100 100     1 BIT-10       35   35
                                                         2 BIT-11       40   40
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   70     4 BSCS-3       40   40
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   85     3 BSCS-2       35   35
                                                         5 BEE-4        50   50
         2 255 255     1 SEECS UG Block   100   95     4 BSCS-3       40   40
                                                         6 BICSE-7      25   25
                                                         7 BESE-3       30   30
                         2 IAEC Building     70   70     1 BIT-10       35   35
                                                         3 BSCS-2       35   35
                         3 RIMMS Building    90   90     2 BIT-11       40   40
                                                         5 BEE-4        50   50
         3 255 255     1 SEECS UG Block   100 100     3 BSCS-2       35   35
                                                         4 BSCS-3       40   40
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   65     1 BIT-10       35   35
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   90     2 BIT-11       40   40
                                                         5 BEE-4        50   50
         4 255 255     1 SEECS UG Block   100 100     3 BSCS-2       35   35
                                                         4 BSCS-3       40   40
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   70     2 BIT-11       40   40
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   85     1 BIT-10       35   35
                                                         5 BEE-4        50   50
         5 255 255     1 SEECS UG Block   100   95     2 BIT-11       40   40
                                                         6 BICSE-7      25   25
                                                         7 BESE-3       30   30
                         2 IAEC Building     70   70     1 BIT-10       35   35
                                                         3 BSCS-2       35   35
                         3 RIMMS Building    90   90     4 BSCS-3       40   40
                                                         5 BEE-4        50   50
         6 255 255     1 SEECS UG Block   100 100     2 BIT-11       40   40
                                                         3 BSCS-2       35   35
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   65     1 BIT-10       35   35
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   90     4 BSCS-3       40   40
                                                         5 BEE-4        50   50
         7 255 255     1 SEECS UG Block   100 100     2 BIT-11       40   40
                                                         3 BSCS-2       35   35
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   70     4 BSCS-3       40   40
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   85     1 BIT-10       35   35
                                                         5 BEE-4        50   50
         8 255 255     1 SEECS UG Block   100 100     1 BIT-10       35   35
                                                         4 BSCS-3       40   40
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   70     2 BIT-11       40   40
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   85     3 BSCS-2       35   35
                                                         5 BEE-4        50   50
         9 255 255     1 SEECS UG Block   100 100     1 BIT-10       35   35
                                                         4 BSCS-3       40   40
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   65     3 BSCS-2       35   35
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   90     2 BIT-11       40   40
                                                         5 BEE-4        50   50
        10 255 255     1 SEECS UG Block   100 100     1 BIT-10       35   35
                                                         3 BSCS-2       35   35
                                                         7 BESE-3       30   30
                         2 IAEC Building     70   65     2 BIT-11       40   40
                                                         6 BICSE-7      25   25
                         3 RIMMS Building    90   90     4 BSCS-3       40   40
                                                         5 BEE-4        50   50
        11 255 255     1 SEECS UG Block   100 100     1 BIT-10       35   35
                                                         3 BSCS-2       35   35
                                                         7 BESE-3       30   30
                         2 IAEC Building     70   65     4 BSCS-3       40   40
                                                         6 BICSE-7      25   25
                         3 RIMMS Building    90   90     2 BIT-11       40   40
                                                         5 BEE-4        50   50
        12 255 255     1 SEECS UG Block   100   95     1 BIT-10       35   35
                                                         3 BSCS-2       35   35
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   70     2 BIT-11       40   40
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   90     4 BSCS-3       40   40
                                                         5 BEE-4        50   50
        13 255 255     1 SEECS UG Block   100   95     1 BIT-10       35   35
                                                         3 BSCS-2       35   35
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   70     4 BSCS-3       40   40
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   90     2 BIT-11       40   40
                                                         5 BEE-4        50   50
        14 255 255     1 SEECS UG Block   100 100     1 BIT-10       35   35
                                                         2 BIT-11       40   40
                                                         6 BICSE-7      25   25
                         2 IAEC Building     70   65     3 BSCS-2       35   35
                                                         7 BESE-3       30   30
                         3 RIMMS Building    90   90     4 BSCS-3       40   40
                                                         5 BEE-4        50   50
98 rows selected.
Elapsed: 00:00:01.42Edited by: BrendanP on 20-Jan-2013 11:25
I found the regex needed to deduplicate:
AND RegExp_Instr (r_c.itm_path || r_i.path, ',(\d+),.*?,\1,') = 0

Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

I've started getting an intermittent error editing my Windows 7 OSD task sequence. Sometimes I can open the TS to edit, but when I try to apply changes I get the error. Other times I get the error when trying to open the TS. If I try again
right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS.
The error reads:
ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file:
[PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Failed to protect memory buffer, hr=0x80070542
TaskSequenceProvider
Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
TaskSequenceProvider
[PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Setting status complete: status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
TaskSequenceProvider
I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong. Here's the section of XML for
that step. I've removed identifying info, and replaced it with a generic term in bold.
<step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
Is there any other log I should check for a clue on this issue? What could be causing this error?

Thanks for sharing that! I tend to save contacting MS support until after I've exhausted other options. I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
kept working on it myself a little longer.
It looks like that link is for an update released in February as KB3023562. I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.
After I had already installed it, I thought to look up that update in configmgr. The update is listed as superseded by 2 other updates. The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
that I didn't need to install KB3023562 after all.

What is the best way to record a video(not big) for free on a mac w/isight?

What is the best way to record a video(not big) for free on a mac w/isight? I need to just make a short (less than 5 minute, no special effects) video, but I can't figure out any programs that will make this possible for me.
Thanks.

Hi Carolyn,
you can use iMovie to record a video for free on a Mac with iSight.
1. Open iMovie HD
2. Choose “Create a new project”
3. Name the project for example “iSight Movie” (first field). In the second field, let the default location “Sequences”, in the third one, video format, choose “iSight”. Push “Create”
4. iMovie window opens, next to the scissors, choose the camera (Camera mode), then iSight. Now you appear on the screen, right?
5. Press “Record with iSight” in the main picture window.
6. Press the same button to stop. Your new clip appears now in the clip panel at the right.
7. You are done!
iMac G5 PPC 2,1 Ghz Mac OS X (10.4.8)

The Export Frame for Classes specified in the Publish or Export settings

Hi,
I have a site I'm currently editing for a client, I'm adding a video element into it, but it doesn't play when I test movie, and when I test scene it gives me this error message:
WARNING: The Export Frame for Classes specified in the Publish or Export settings, frame 2, does not exist. No bytecode for ActionScript 2.0 classes or interfaces was exported.
I've heard its a bug in CS3
Can anyone help?
here's the actionscript:
/**********---------- Config Part ----------**********/
import cn.com.webstudio.util.*;
Stage.scaleMode = "noscale";
Stage.align = "TL";
//Stage.showMenu = false;
stop();
/**********---------- Variable Part ----------**********/
var xmlpath:String;
var dataArr:Array = [];
var curItem:Number = 0;
//sound volume setting
var volume:Number = 50;
//buffer time setting
var bufferTime:Number = 10;
var locked:Boolean = false;
//please set these fellowing value from external xml file.
var autoPlayFirst:Boolean = false;
var autoPlayAll:Boolean = false;
var autoNext:Boolean = false;
var mainStyleColor:Number = FFFFFF;
var titleItem, videoItem, thumbList, controlItem, scrollItem;
/**********---------- Function Part ----------**********/
// Load the xml file.
function loadXML(url:String, callback:Function) {
    var myxml:XML = new XML();
    myxml.ignoreWhite = true;
    myxml.onLoad = function(success) {
        if (success) {
            if (callback != null) {
                callback(this);
    myxml.load(url);
if(xmlpath !== undefined ){
loadXML(xmlpath, parseXML);
}else{
loadXML("config.xml",parseXML);
// parse xml data
function parseXML(xml:XML) {
    curItem = -1;
    dataArr = [];
    var i, j, temp1, temp2, temp3;
    temp1 = xml.firstChild.firstChild.childNodes;
    // config part
    autoPlayFirst = temp1[0].firstChild.nodeValue=="false";
    autoPlayAll = temp1[1].firstChild.nodeValue=="true";
    autoNext = temp1[2].firstChild.nodeValue=="true";
    mainStyleColor = int(temp1[3].firstChild.nodeValue);
    // item data
    temp2 = xml.firstChild.childNodes[1].childNodes;
    for (i in temp2) {
        dataArr[i] = {};
        temp3 = temp2[i].childNodes;
        for (j in temp3) {
            dataArr[i][temp3[j].nodeName] = temp3[j].firstChild.nodeValue;
    init();
function init() {
    // title item
    titleItem = this.attachMovie("titleItem", "titleItem", 1);
    titleItem._x = 68;
    titleItem._y = 21;
    // video list
    videoItem = this.attachMovie("videoItem", "videoItem", 2);
    videoItem._x = 68;
    videoItem._y = 50;
    videoItem.posX = videoItem._x;
    videoItem.posY = videoItem._y;
    videoItem.posW = videoItem._width;
    videoItem.posH = videoItem._height;
    // thumb list
    thumbList = this.attachMovie("thumbList", "thumbList", 3);
    thumbList._x = 558;
    thumbList._y = 20;
    // control item
    controlItem = this.attachMovie("controlItem", "controlItem", 4);
    controlItem._x = videoItem._x-1;
    controlItem._y = videoItem._y+videoItem._height+11;
    controlItem.posX = controlItem._x;
    controlItem.posY = controlItem._y;
    var mainStyleColor:Number = FFFFFF;
    //controlItem.volBut.onPress();
    // scroll item
    scrollItem = this.attachMovie("scrollItem", "scrollItem", 5);
    scrollItem._x = thumbList._x+thumbList._width-scrollItem._width+3;
    scrollItem._y = thumbList._y+thumbList.mask._y;
    // set main style color
    setStyle();
function setStyle() {
    wEffect.setRGB(thumbList.back, mainStyleColor);
    wEffect.setRGB(controlItem.back, mainStyleColor);
    wEffect.setRGB(titleItem.back, mainStyleColor);

click file/publish settings/flash/actionscript settings and make sure frame 1 is set as the export frame.
if that's already set, don't use test scene.

(Help) system classpath -Vs- the place where weblogic looks for classes

The following is my app's hierarchy.
myapp
|
|__myjsp.jsp
|
|__WEB-INF
|
|__classes
|_ MyClass.class
I am not able to use MyClass within myjsp.jsp
i.e. a scriplet like that shown below gives an error stating that MyClass isnt found
<% MyClass obj; %>
I've tried setting the system classpath, but to no avail.
Is there a difference between the system classpath and the place where weblogic looks for classes?
(I am running my app by creating a myapp.war file and placing it in autodeploy folder)

Try moving your class to a named package and use the appropriate import statement in your JSP. Loading it from WEB-INF/classes/packagename should be fine so you might want to remove the other classpath mods you made to eliminate that uncertainty.
Here's a snippet from http://publib.boulder.ibm.com/infocenter/dmndhelp/v6rxmx/index.jsp?topic=/com.ibm.websphere.nd.doc/info/ae/ae/rweb_jsp_migration.html:
"As of JSP 2.0, referring to any classes from the unnamed or default package is not allowed. This can result in a translation error on some containers, specifically those that run in a JDK 1.4 or greater environment which will also break compatibility with some older JSP applications. However, as of JDK 1.4, importing classes from the unnamed package is not valid. See Java 2 Platform, Standard Edition Version 1.4.2 Compatibility with Previous Releases for details. Therefore, for forwards compatibility, applications must not rely on the unnamed package. This restriction also applies for all other cases where classes are referenced, such as when specifying the class name for a tag in a Tag Library Descriptor (TLD) file."
HTH,
Mike
Weblogic/J2EE Security Blog: http://monduke.com

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. How do I resolve this issue?

I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. I did not have this issue in the older version. I use an iMAC running OS10.6.8. How do I resolve this issue?

Starting with this, you have errors in your CSS code.
body {
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 0px;
color: 151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: EFF5F8;
body {
margin:0;
color: #151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: #EFF5F8;
font-size: 100%;
Related links:
Windows Chrome, why do my fonts look so bad? - Lee Green
css3 - Bad font rendering Chrome - Stack Overflow
Nancy O.

Exception "not implemented for class oracle.jdbc.driver.T4CNumberAccessor"

Hello I'm having some troubles dealing with 'java.sql.Date' I'm working with express edition database and I have three classes(different packages)
1.Mapper
2.Objects Class
3.ConsoleTest
I need to get an arraylist of objects, some of which contain dates, but when try to do it I get this exception
"java.sql.SQLException: Invalid column type: getDate not implemented for class oracle.jdbc.driver.T4CNumberAccessor"
Do you have any idea how I can implement the getDate method for this T4CNumberAccessor
Here are the methods that I'm using
1.Mapper
public ArrayList<Object> getAllTaskAuctions(Connection con)
          ArrayList<Object> l1 = new ArrayList<Object>();
          String SQLString1 = "select * from taskauction natural join tasks";
PreparedStatement statement=null;
try
//=== get taskauctions natural join tasks
statement = con.prepareStatement(SQLString1);
ResultSet rs = statement.executeQuery();
while(rs.next())
l1.add(new TaskAuction(rs.getInt(1), rs.getInt(2), rs.getInt(3),
rs.getDate(4), rs.getDate(5), rs.getInt(6)));
l1.add(new Task(rs.getInt(1), rs.getInt(2), rs.getString(3),
rs.getString(4), rs.getString(5), rs.getString(6), rs.getInt(7)));
catch (Exception exc)
System.out.println("Fail in TaskAuctionMapper - getAllTaskAuctions");
System.out.println(exc);
return l1;
2.ConsoleTest class
Connection con;
     public Connection getConnection(){
          try{
     Class.forName("oracle.jdbc.driver.OracleDriver");
     con = DriverManager.getConnection(
     "jdbc:oracle:thin:@localhost:1521:XE", "Project", "123" );
     //username/password@[/]host[:port][service_name]
     catch (Exception e)
     {   System.out.println("fail in getConnection()");
     System.out.println(e); }
          return con;
     public static void main(String[] args) {
          ConsoleTest ct = new ConsoleTest();
          TaskAuctionMapper tam1 = new TaskAuctionMapper();
ArrayList<Object> alt1 = tam1.getAllTaskAuctions(ct.getConnection());
Iterator<Object> itr1 = alt1.iterator();
while (itr1.hasNext())
TaskAuction taskauct = (TaskAuction) itr1.next();
//Problem, exception traced to TaskAuctionMapper
System.out.println(
          "Task ID: " + taskauct.getTaskid()+ ", "+
          "StartDate: "+ taskauct.getStartdate()+", "+
          "User ID: " + taskauct.getUserid());
     }

Found the answer, I shouldn't use integers as parameters of column index in the result set, but instead use String to mark the fields :)

To count number of records in an internal table for a condition

Hello All,
I want to count number of records in an internal table for a condition.
For e.g. -- I have one internal table IT which having fields F1, F2, F3, F4, F5.
Now, I want number of records in itnternal table IT where F1 = 'ABC'.
Is it possible to do..?? If yes, then how.??
Thanks in advance...!!
Regards,
Poonam.

Hi,
If you mean an internal table, there are a few ways to do this.
1 One would be to loop over the table with a WHERE clause and increment a counter.
data: lv_counter type i.
clear lv_counter.
loop at itab where fld1 = 'ABC'.
lv_counter = lv_counter + 1.
endloop.
lv_counter now has the number of rows per the condiction.
2 Well, you may want to try this as well, and compare to the LOOP way. Not sure what kind of overhead you may get doing this way. Here ITAB is our main internal table, and ITAB_TMP is a copy of it. Again I think there may be some overhead in doing the copy. Next, delete out all records which are the reverse of your condition. Then whatever is left is the rows that you want to count. Then simply do a LINES operator on the internal table, passing the number of lines to LV_COUNT.
data: itab type table of ttab.
data: itab_tmp type table of ttab.
itab_tmp[] = itab[].
delete table itab_tmp where fld1 'ABC'.
lv_count = lines( itab_tmp ).
Thanks & Regards,
ShreeMohan

Info record and source list mandatory for PO creation?

Hi Gurus,
Client wants to make Info record and source list mandatory for PO creation?
If Inforec and source list not available for that material, then user can't able to create PO.
How can I achieve this requirement?
Any user exit available?
pls help..

Hi ,
SproMM-Purchasing -Source ListDefine Source List Requirement at Plant Level
If u mark the indicator then the Source list is mandatory for all the materials procured.
If u want for a speciic material , mark it in purchasing view of Material Master.
Inorder to create a source list , inforecord is mandatory -- this is by default Standard SAP .
Regards
Ramesh Ch

LSO - Recording Attendance in IT 2002 for Class Room Training.

Similar Messages

Maybe you are looking for