LSO, Test results in TAC database

Hello everybody!
I have a problem with online tests in Learning Solution 602.
So, I've got online test, with 'Result Storage' option on, created in Test Author.
Also 'Dynamic Item Selection' turn on in the test.
The learner passes the test in Learning Portal and results are kept in SAP.
I want to see results of the test considering separate items.
I see these results in table LSOTACLRNITRES (Item Results).
But I cannot find an Item ID from LSOTACLRNITRES in table LSOTACITEM200 (Item and Item Attributes from Test structure).
Item ID-s in these two tables is different, and seems like item result not corresponding to item in test structure.
So, how can I find title of item, if items in the test have been mixed (a 'Dynamic Item Selection')?

Dear all,
I have a problem with online tests in Learning Solution 602.
I've got online test, with 'Result Storage' option on, created in Test Author.
The learner passes the test in Learning Portal and results are kept in SAP.
I have go thru the Test result report LSO_TAC_ITEMSTAT - Test Item Statistics but I can't find the entry.
Currently using LSO 6.04 with release 7.10 and patch level 15.
Pls help.
Thanks in advance.
Hitesh.

Similar Messages

LSO test results

Hi,
I created an online test. When the user takes the test the results
are sent to backend. It is possible (via LSO_TAC_TRAIN_RESULT
for instance) to show the users results. But if the user takes the
test again the results are overwritten. Is it possible to change
this?
(We are using LSO 300 (SP18)
Hubert

Hello,
In our system I noticed that after the user takes an online test the results 'vanish' after some time - table LSOTACLRNRESULT which had previously data is empty again. Also sometimes the results aren't stored at all and the report shows no activity for user/test.
As for the overwritten tests the system should show not the last but the best user result (I was told that was the system behavior in the previous LSO version).
Regards,
Hubert

How can I save test results to microsoft access database?

How can I save test results to microsoft access database?

Your best solution is to use the Database Connectivity Toolset. You can view the specifications and prices at the following web site:
LabVIEW Database Connectivity Toolset
http://sine.ni.com/apps/we/nioc.vp?cid=6429〈=US
If you have additional questions about this toolset, you can email us at [email protected]
Zvezdana S.
National Instruments

LSO - Correspondence Test result

Dear Experts
Could you please help in this matter.
Is there a way where HR admin can send mail to the respecitive managers about the WBT final test results of their employees using LSO correspondence. If yes, could you pls explain me as how to config this scenario.
Thanks in Advance
Selva

Hi Gautham,
Even in portal also not showing achieved percentageor percentage of pass. After attending exam, system is showing Pass percentage but not updating into system. I tried in SAP with the report TAC_PARTICIPANT_RESULTS_LSO . I am not able to see. Please help.
Regards,
Sushma

Load Test Results - time series request data for by URL in VS2013

I am trying to figure out how to export and then analyze the results of a load test, but after the test is over it seems I cannot find the data for each individual request by url. This data shows during the load test itself, but after it is over it seems
as if that data is no longer accessible and all I can find are totals. The data that I want is under the "Page response time" graph on the graphs window during the test. I know this is not the response time for every single request and is probably
averaged, but that would suffice for the calculations I want to make.
I have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
My goal is to plot (probably in excel) each request url against the user load and analyze the slope of the response time averages to determine which requests scale the worst (and best). During the load test I can see this data and get a visual idea but when
it ends I cannot seem to find it to export.
A) Can this data be exported from within visual studio? Is there a setting required to make VS persist this data to the database? I have, from under Run Settings, the "Results" section "Timing Details Storage" set to "All individual
details" and the Storage Type set to "Database".
B) If this data isn't available from within VS, is it in any of the tables in the LoadTest2010 database where all of the summary data is stored?
Thanks
Luke

Hi Luke,
Since the load test is used to
simulate many users accessing a server at the same time, it is mainly verify a wev server load stress.
As you said that you want to find the data
for each individual request by url, I know that generally we can analyze the url request from the Summary like the following screen shot.
>>I
have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
I suggest you can try to add the
SQL Tracing Connect String in the Run Setting properties to trace the data.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/74ff1c3e-cdc5-403a-b82f-66fbd36b1cc2/sql-server-tracing-in-visual-studio-load-test?forum=vstest
In addition, you can try to create an excel to analyze the load test result, for more information:
http://msdn.microsoft.com/en-us/library/dd997707.aspx
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I want to write a program in LabView then pass the test results to teststand to check if it pass or fail without displaying the test stand program,

I want to write a program in LabView and create an execute but I want to be able to pass test results to test stand to find it the unit pass ar fail the test then save the data to a database. How would i go about it.

What's confusing is your statement that you want to do this "without display the test stand program". You can minimize the TestStand UI to the task bar but if you don't want TestStand to be running, how can TestStand evaluate the result. Explain a little more please.
In the message body of your post, you just say you want to create a LabVIEW exe and pass the results to TestStand. What I would recomend is that instead of an exe, you create a dll and use TestStand's DLL adapter to call it and return the results. TestStand will evaluate it and do the logging.

Would anyone please give me a test result of Oracle 9iFS

We want to build a content management system. We've already built a MIS and the data stored in a Oracle database . The data in the content management will be used by the MIS . would anyone please give us a test result of Oracle 9iFS. We want know the capability, reliability of 9iFS . It will be appreciated If anyone can give us some proposes.
thanks .

Thanks for replying. i've tried doing it with one square as a
movie clip symbol and then flipping that square over with the 3d
rotation tool and then over and over. but i'm having to draw other
squares on other layers to make up the rest of the square as it
gets created. is this the right way to do it? what would be the
simplest way? i know you said its just an animation, but how would
you create the animation?
Thanks

Build model - view test result - i have no ROC tab

Dear all,
When I build eg. a classification SVM (Lin.Reg, Naive Bayes)) model and view the test results, in that window I have only these tabs: Performance, Performance Matrix, Lift, Profit. I have no Roc tab. Do you know why? Before I used SQL Developer 3.2.09.30_x64 with this problem. Now I use SQL Developer 3.2.20.09.87_x64 with this problem. When I try to tune the SVM algoritm (so not let it automatic), there are only these tabs: Cost, Benefit, Lift, Profit. But not ROC tab :(((
When I use the old Oracle Data Miner software from 2011, version 11.1.0.3.0 (build 11705) connecting to the same database server (using the same account), and I build a classification SVM model, I have ROC curve.
Can anyone help me to solve this misterious problem?
Than you!!!

We don't have "preferred target value" during model building in the new data miner. However, you can use the Transform node to transform your target into 2 classes (preferred target value and others). You then use the output from the Transform node as input source for your model build.
Here is a process to transform your target into 2 classes:
- Create a Transform node
- In Transform node, select the target column, click "Add Transformation" icon on the toolbar
- In the Add Transform dialog, select "Custom" Binning Type, click "Generate Default Bins" button (accept default settings)
- In the "Custom bin values" listbox, remove the non-preferred target values (select the values and click the "Remove Transformation" icon on the toolbar)
- Now, you should have one preferred target value in the "Custom bin values" listbox, click OK to finish
You can now connect the Transform node to a Build node. In the Build node, select the transformed target (it should have the "_BIN" suffix in the name) as the Target for model build.
Hope this help!
Denny

ABAP/4 Open SQL array insert results in duplicate database records in SM58

Hi Everyone,
I am testing a file to idoc scenario in my Quality system. When I passed the input file, the mapping executed successfully and there are no entries in SMQ2 but still the idoc wasn't created in the ECC system. When I have checked in TRFC, I am getting the error ABAP/4 Open SQL array insert results in duplicate database records for IDOC_INBOUND_AYNCHRONOUS function module. I thought this is a data issue and I have tested with a fresh data which was never used for testing in Quality but even then I am getting the same error.Kindly advise.
Thanks,
Laawanya

use FM idoc_status_write_to_database to change the IDoc status from 03 to 30 and then run WE14 or RSEOUT00 to change the status back to 03
resending idoc from status 03 ...is a data duplicatino issue on receiving side...why do u need to do that ?
Use WE19 tcode to debug
In we19
1)U can choose your Idoc number in existing Idoc textbox
2)Press execute
3)u will display ur Idoc struct
4)Dbl click on any field then u can modify its content
5)PressStd Outbound Processing Btn to process modified Idoc
Thats it

Display missing test results

Post Author: sunny07
CA Forum: General
I would like to display missing test results in the below format.
Group 1: product group
                                                  Test ID 1                      Test ID 2                         Test ID 3                          Test ID 4
Unit Number                                                                   *
Group 2: product group will have different tests than group 1.
                                                 Test ID 5                      Test ID 6
Unit Number                                    *
(* test is missing)
Any suggestions how I should set this up in Crystal Reports?

Post Author: sunny07
CA Forum: General
User will be prompted for a donation type which they will select from a drop down menu. They will only be able to select one donation type when the report is run. There are only 4 donation types that the users can choose from. There are different test Ids for each donation type. The test IDs for each donation type are not defined in the database. Any suggests how I define the test IDs for each donation type IN CR 11.5? Any suggestion how I display the test IDs as displayed below? Connecting to an Oracle database. 24BA, FINB, HBC, HCV, ABRH, ABS are examples of test IDs.
Example running report for the donation type Bacterial Culture:
Unit Number                              Batch ID                      24BA                   FINB               HBC              HCV
W03305100919                     20070321HI                                                *                                                *
Example running the report for the donation type ABO Screen:
Unit Number                     Batch ID                           ABRH                       ABS
W035304100926             20070320HI                          *
W035304100932              20070320HI
W035304100932 will appear on the report because it has ABO Screen donation type. This unit does not have any missing test results.
*The test ID does not exist for this unit number.
Thanks!

LSO200 test result not populated

Hi there,
We run LSO on 4.7x200 with J2EE620. The problem we got is that when a user doing a test, the test result was not recorded and in the table HRP1001 the user name is the ID used in LSM config under /../lsm/mediator/config.
Infotype 5008 is configured correctly.
Any Idea?
Thanks!
Jason

Hi, test the following statement in command line:
SQL>VAR ordercursor REFCURSOR;
SQL>EXECUTE GETORDERsBYCATALOGUECODE('001',:ordercursor);
SQL>print :ordercursor;
I+n your code, the error is OPEN ORDERCURSOR, the ORDERCURSOR cursor is open by default.+
Your correct code is:
declare
ordercursor SYS_REFCURSOR;
orderid NUMBER;
numberordered NUMBER;
costcharged BINARY_DOUBLE;
begin
GETORDERsBYCATALOGUECODE('001',ordercursor);
DBMS_OUTPUT.ENABLE(20000);
DBMS_OUTPUT.PUT_LINE('Order Number, Number Ordered, Cost Charged');
LOOP
FETCH ordercursor INTO orderid, numberordered, costcharged;
exit when ordercursor%notfound;
DBMS_OUTPUT.PUT_LINE(orderid || ', ' || numberordered || ', ' || costcharged);
END LOOP;
CLOSE ordercursor;
end;
Roberto.
Edited by: user584812 on Dec 23, 2008 3:47 PM

How to view the emma coverage test result when running local job

Hi Guys,
When using emma in DTE, we can obtain the code coverage test result. I submit a farm job, and can get a txt or html file on coverage report. But when I run it locally, the txt / html files is unavailable. I can only see a folder named coverage with coverage.emma & metadata.emma. So my question is how can I get the coverage report from it?
If I can use some command to generate report files, then what is it and how to run it.
Thanks

Hello Twenz
This forum is mainly (should not be only but it is) used for supporting Oracle Application Testing Suite (OATS) products.
I guess your question is not related to this solution at all. So maybe this is not really the right forum.
Good luck
JB

Generating a test result without a module

I have a basic question about generating a test result without calling a module in TestStand.
For example, I do a pair of read operations from a product and return the results to a pair of numeric local variables. Now I want to do a sequence pass/fail or numeric limit test based on these two values. The results are already available and I can do a function step to test a result, say from a basic math operation. But I can't create a pass/fail result from a function step. I've gotten around the issue by creating a dummy module that has no function other than to allow me use the expression builder to assign a result to one of the step result items, but this sure seems stupid.
What am I missing?
Thanks,
Dave
Solved!
Go to Solution.

Do it in the Pre-expression.
Use the <none> adapter as suggested and place down a Numeric Limit Test step. Then in the Pre-Expression put something like this:
Step.Result.Numeric = Locals.A - Locals.B
If you look at the Data Source tab you will see the variable which gets evaluated and compared against the limits.
In fact if you wanted to you could avoid the Pre-Expression and just put your calculation in the Data Source Expression:
Locals.A - Locals.B
You can set up the Limits on the Limits tab for that step.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

The ABAP/4 Open SQL array insert results in duplicate database records

Hi,
Iam getting following error :
The ABAP/4 Open SQL array insert results in duplicate database records.
Error in ABAP application program.
The current ABAP program "SAPLV60U" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
" Information on where terminated
The termination occurred in the ABAP program "SAPLV60U" in "VBUK_BEARBEITEN".
The main program was "SAPMSSY4 ".
The termination occurred in line 503 of the source code of the (Include)
program "LV60UF0V"
of the source code of program "LV60UF0V" (when calling the editor 5030).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "VBUK_BEARBEITEN" "(FORM)" but was not handled locally, not declared
in the
RAISING clause of the procedure.
The procedure is in the program "SAPLV60U ". Its source code starts in line 469
of the (Include) program "LV60UF0V "."
Please assist how to proceed further ..
Many thanks
Mujeeb.

Sorry, THe correct note is 402221.
Description from the note
<< Please do not post SAP notes - they are copyrighed material >>
Edited by: Rob Burbank on Feb 22, 2009 3:46 PM

SCOM 2012 - Visual Studio Web Test - Cannot retrieve downloaded test results / share not configured

Hello-
I am trying to get my Visual Studio web test to work in SCOM 2012. I have configured the run-as account, and set the correct overrides for the Alert attachment file share discovery. I followed this guide to the T: http://technet.microsoft.com/en-us/library/jj899889.aspx
When I Select the site that I want to download the test result file for, The results pane shows the following error:
"The share does not seem to be configured in the Alert Attachment Management Pack"
When I attempt to download the result file without manually entering creds, it fails. When I do enter creds, in the "task history" it shows as succeeded, but I get no results. All subsequent automatic "Retrieve previously..." fail. In
the "task history", the "Run As" column is blank (unless I manually enter the credentials, which doesn't do me any good, anyway)
My "Alert Attachment" MP is inside another MP I created, along with the "System Center Global Service Monitor VS Web Test" MP and two other System Center MPs. This created MP is the one that my Alert Attachment Overrides are attached
to.
My Run-As account has the needed permissions to the file share, so I am lost as to why this isn't working. Any help would be greatly appreciated.

Have you followed the steps here to configure the share location http://technet.microsoft.com/en-us/library/jj899889.aspx ?

LSO, Test results in TAC database

Similar Messages

Maybe you are looking for