LSO _Training Report

Hello SAP Gurus,
We are looking for a report which would give a manager the list of courses the employees in his department have completed / overdue.
We are not able to run a report. We see the list of employees who have attened a training thru: LSO_RHXTEILN - Participant List
When we run LSO_TAC_PART_RESULT - Participant Results Overview, the report is blank and we see no data.
We have followed up a course and marked employees Preset and passed the employees in the course.
Please let me know how you are reporting/ Tracking Completed / over due training.
We are on LSO 600
Thank you in anticipation.
Deepthi.

Hi,
The LSO_TAC_PART_RESULT is only if you had pre/post or online tests. This reports gives you the overall test result for the learner.
The Participant List report is probably your best bet however it will not show you who has NOT yet taken the course. Since it is an ALV report, you can configure which columns you want to see (not all are shown out of the box) by clicking on the Change Layout icon once the report has run.
Hope this helps.
Danielle

Similar Messages

SAP LSO Reports Using BI

Dear All,
We have already implemented SAP LSO on SAP EP 7.3. We have SAP R/3 ehp4 and SAP EP 7.3 on separate stack. Now we insalled BI Java components to SAP EP 7.3 and installed BI ABAP Separately.
So now we have 3 servers SAP R/3 Abap, SAP BI Abap and SAP ( EP+BI) Java.
We have all our master data, transaction data on SAP R/3 Abap. SAP R/3 Abap is integrated with SAP ( EPBI) Java. Also we created system in SAP ( EPBI) Java to access BI Abap data.
How to call BI Reports on SAP ( EP+BI) Java.?
Regards,
Eben Joyson

Hi Venkadesh,
Thanks . Your reply was very helpful. I have one doubt.
We have implemented SAP LSO having SAP R/3 ABAP and SAP EP on separate stack. Now we added BI component to SAP EP and installed SAP BI ABAP separately. We established RFC connection between SAP R/3 ABAP (Client 300) and SAP BI ABAP (Client 350).
We have all our master and transaction data on SAP R/3 ABAP (Client 300) . Should we need to load all that in to SAP BI ABAP (Client 350).? If so, Can you please guide me through.
By the mean time, I will also refer some documents.
Regards,
Eben Joyson.

Standard report for LSO containing infotypes 1021 and 1036

Hello,
Is there a standard report which contains infotypes 1021 (Prices) and 1036 (Costs)?
We have used 1036 to record group proces and; e.g. LSO_RHXKBRO2 doesn't contain 1036.
ERP2005, standard version.
Help is highly appreciated.
BR,
Pia

Hi,
As far as I know, there is no standard report in SAP for master data load using excel sheet. You have write a custom z-program with the help of BDC for basic actions or for individual infotypes upload you can use 'Fast Entry' for quickly uploading data for any perticular infoype using Tcode PA30.
Hope this helps.
Thanks,
Sarika.

Report for LSO

Hi All,
How to generate report which shows last event date of a course type? (except generate Course Date report and sort the date)
Thanks!
Vivian

Hi Vivian,
BI has more standard reports than R/3. However looking at your requirements, I dont think any of the standard BI report will help your clients. You have to create a custom ABAP report or a new Bex Report.
See this link for available BI queries.
http://help.sap.com/saphelp_nw70/helpdata/en/8a/4bbf3d0133bf14e10000000a114084/frameset.htm
Sanghamitra

Course Brochure Report RHKBRO00_ LSO

Hi Folks
I want to add the few and want to delete few fields from the Course Brochure Report, When I add the field / Delete the field report is appearing fine with me but at same time when some othrer user execute the report he can not see the changes I made.
I Think I am missing some basic steps on the report. Few Question
Report need to transport ? or I can Edit fields directly in Production ? like Selection Screen Variant
Report is customzied at the time of project so the MS Words content edited I dont have that file is that required for editing the report ?
Documentation available is not giving me idea ?
Thanks in advance for your support
Baddar

Hi Baddar,
I think you are saving the layout as user specific (layout name's begin's with a letter). You should save layout as none-user specific layout (layout name must be start with /)
For more information have a look at:
Saving Layouts - SAP List Viewer (ALV) Grid Control (BC-SRV-ALV) - SAP Library
Regards,
Shirin

Your help really needed...Report for LSO

Hi All,
The customer need a report which shows the last even date of each course types. Does anyone know how to do it? (Except generate Course Dates report and then sort it.) Really urgent!!!
Thanks!
Vivian

Hi Vivian,
BI has more standard reports than R/3. However looking at your requirements, I dont think any of the standard BI report will help your clients. You have to create a custom ABAP report or a new Bex Report.
See this link for available BI queries.
http://help.sap.com/saphelp_nw70/helpdata/en/8a/4bbf3d0133bf14e10000000a114084/frameset.htm
Sanghamitra

Front end components are needed for LSO

Dear experts,
We want to implement Training & Eventmanagent in ESS portal. I searched in sdn .But i didn't get proper solution. It seems from EHP5 onwards these services /iviews are obsolete and TEM is repleced by LSO only.
for LSO Implementation which Business Package and portal components I need to be installed and which Add on to be installed in Application server.
our landscape: portal: NW EP 7.01 ehp2 , ess wda1.50 sp5, mss bp 1.51 sp5
R/3-----ECC 6.0 EHP5
please suggest me regarding Front end Software Components with SP's for LSO implementation.
Thanks
veeranji

note that
Usage of the learning solution landscape would be captured in the
report as a engine metric. There is no need to set a pricelist and
a user type.
All users logging into the SAP systems irrespective of the modules,
need to be classified under the contractual user types :
ERP Developer - BA
ERP Professional user - AX
ERP Limited Professional user - AY
depending on the activities of the users matching with the usertype
definition.
service.sap.com -> SAP Support Portal -> Downloads -> SAP Support
Packages -> Support Packages and Patches - Entry by Application Group ->
SAP Application Components -> SAP ERP -> SAP ERP ENHANCE PACKAGE -> EHP4
FOR SAP ERP 6.0 / NW7.01 -> Entry by Component -> Portal Content
Here, you will find the two BPs:
BP ERP INSTRUCTOR & TUTOR 1.41
BP ERP TRAINING ADMIN 1.40
Business Package for Learning (SAP ERP) 1.0 (PE-LSO-LPO)
and check here
http://help.sap.com/erp2005_ehp_04/helpdata/en/43/9065e6d9f521a6e1000000
0a1553f6/frameset.htm

LSO - Follow-Up Course Participation

Dear All,
When following up a course in SAP LSO, I marked the course participation as 'absent' for ppl who did not turn up for the course. What happens in the system is that a cancellation will be triggered, thus this person will not be reflected in any attendees/participation report. What I need is actually is a report where I can see participants who are absent and present. But, when system cancels the participation, it creates a 040 relationship in table HRP1001, thus there is no way for me to differentiate between someone who cancels before the training, and someone who were absent during the training. Has anyone run into this problem before? Pls advise. Thanks.

PeckHan
You may need to differentiate between these 2 scenarios
A: Attendee Cancels Course Attendance Before Occurence of Course
In this case, user will need to withdraw the attendee from the course before user can perform "follow up" of the course. This is where a cancellation reason can be specified.
B: Attendee Did Not Show Up During Course
In this case, when user select the course to perform "Follow up" from the dynamic course menu, user should be presented with a screen that shall list all course attendees assigned to the course run.
User may mark that the attendee had not show up for the course at this stage. See screen shot (https://wiki.sdn.sap.com/wiki/download/attachments/26779/CourseFollowUp-LSO.jpg)
You may want to ensure that the following config point (IMG>Training & Events Management>SAP Learning Solution>Training Management>Recurring Activities>
Follow-Up>Control of Process Steps) has been appropriately configured such that the attached screen shot appears.
Hope the above information has been helpful.
Thanks

LSO Configuration Issue with F5 HostNames

Hi Experts,
I'm having error upon opening "Start Course" at LSO. The error only occurred if we are using F5 Hostname (working fine with direct URL).
I've already given super admin role to my user id.
com.sap.hcm.ls.lms.servlets.exceptions.InvalidArgumentException :
     at com.sap.hcm.ls.lms.servlets.control.CourseUpdater.update(CourseUpdater.java:79)
     at com.sap.hcm.ls.lms.servlets.control.EventDispatcher.updateModels(EventDispatcher.java:133)
     at com.sap.hcm.ls.lms.servlets.control.RequestProcessor.doProcess(RequestProcessor.java:100)
     at com.sap.hcm.ls.lms.servlets.control.RequestProcessor.process(RequestProcessor.java:80)
     at com.sap.hcm.ls.lms.servlets.control.Mediator.processRequest(Mediator.java:226)
     at com.sap.hcm.ls.lms.servlets.control.Mediator.doGet(Mediator.java:146)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:748)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.hcm.ls.lms.courseloader.LoaderException: Failed to look for mapping file for object: /Overview-_Manage_Periodic_Reporting/v1/CourseID-org.crs
     at com.sap.hcm.ls.lms.courseloader.repository.RepCourseInfo.setupMapping(RepCourseInfo.java:96)
     at com.sap.hcm.ls.lms.courseloader.repository.RepCourseInfo.(RepCourseInfo.java:52)
     at com.sap.hcm.ls.lms.courseloader.repository.RepCourseLoader.getCourse(RepCourseLoader.java:106)
     at com.sap.hcm.ls.lms.data.session.CourseStateUpdater.loadCourseFromPath(CourseStateUpdater.java:389)
     at com.sap.hcm.ls.lms.data.session.CourseStateUpdater.loadCourse(CourseStateUpdater.java:186)
     at com.sap.hcm.ls.lms.data.session.CourseStateUpdater.update(CourseStateUpdater.java:135)
     at com.sap.hcm.ls.lms.servlets.control.CourseUpdater.update(CourseUpdater.java:72)
     ... 21 more
Caused by: org.w3c.www.protocol.http.HttpException: Unable to contact target server ps2-portal.bhpbilliton.net:443 after 1 tries.
     at org.w3c.www.protocol.http.HttpBasicServer.runRequest(Unknown Source)
     at org.w3c.www.protocol.http.HttpManager.runRequest(Unknown Source)
     at org.w3c.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at com.sap.hcm.ls.shared.repository.access.http.HttpRepository.getConnection(HttpRepository.java:748)
     at com.sap.hcm.ls.shared.repository.access.http.HttpRepository.getConnection(HttpRepository.java:699)
     at com.sap.hcm.ls.shared.repository.access.http.HttpRepository.readFile(HttpRepository.java:427)
     at com.sap.hcm.ls.shared.repository.access.DeltaVerRepository.readFile(DeltaVerRepository.java:335)
     at com.sap.hcm.ls.shared.repository.access.Repository.readFile(Repository.java:376)
     at com.sap.hcm.ls.shared.repository.proxy.MappingFile.readMapping(MappingFile.java:194)
     at com.sap.hcm.ls.shared.repository.proxy.LocationMapperPool.getMapper(LocationMapperPool.java:54)
     at com.sap.hcm.ls.lms.courseloader.repository.RepCourseInfo.setupMapping(RepCourseInfo.java:92)

R00KIE wrote:
I suspect this is something you should try to ask upstream, most probably that drive needs some quirks to work without reporting problems and upstream is the best place to ask about this.
On the other hand maybe someone here already dealt with something similar and maybe you can use some workaround to avoid the problem until a proper fix is in place, this still implies reporting this issue upstream.
Thanks for your reply. What exaclty do you mean by upstream?

[LSO] Resource types blocking

Hi,
We have implemented SAP LSO at a customer, but during a training course we gave to the client, we came across the following problem:
When we are creating a course type and open the screen for attaching resource types (we have created multiple R objects) while someone else is executing the same action, SAP says the resource type is blocked by the other user (who first opened the selection screen).
We think this is quite strange since we are not actually changing the R object, just creating a relation with the course type (object D)
This is a problem since a large population will use LSO and probably create course types at the same time.
Is there a way to solve this problem ?
Thanks

A Workaround will be create the relationship Event type-Resource type after the Event type is created. You can do this by PP01 tx.
An example of this: centralize the creation of the relationship Event type-Resource type in one User (let's to say yourself).
Well, when anyone creates an Event type that requires a Resource type, he/she will send the requirement to you, and save the Event type without this assignment.
Then, in certain moment, you take the list of D objects that requires a specific Resource type, and:
1. go to PSVR transaction
2. select R object > right click > change
3. (you'll go to PP01 transaction) select the Relationships infotype and create the B022 relationship for each Event type.
Also, you can build a custom program that do something simmilar in order to automate the process.
Alsomore, i'm thinking another workaround:
You can change the relationship behaviour, in order to create only the "A" link when you create an Event type (that avoid to lock the resource), and then by using a program that run let's to say once a day, check every A022 relationships without the "B" link and then add the corresponding B022 relationship in R objects.
But i think meanwhile the "B" link is not done, many reports can bring erroneus or bad information.
Regards!

9i Reports Graphic using JSP not showing in Portal

Using Portal Rel 2, 9iAS Report Server Rel 2, Oracle 9i database and 9iDS Report Builder, SUN servers and Windows2000 (for Builder).
I've created 2 reports very simple, using scott.emp table, one tabular (deptno,ename, salary) and one line graph (ename,salary) both created as .RDF (paper layout) and .JSP (web layout).
The tabular reports both work fine on portal (after setting Oracle Reports Security as Servelet and as JSP).
The graphics only work as Servlets , as .JSP it shows the little box with the red x.
If I run the reports outside of portal, all 4 work fine.
Any idea what might be the problem?
Thanks in advance for all your help on this.
Max.

Hi Zsolt:
Thanks for your response. May I ask you further questions regarding your solution:
1) content SCORM compliant?? (yes/no)
Yes, it is SCORM compliant
2) check in / publish the content in the Authoring Environment
I am not sure if my colleague has check-in/publish it in AE. I'll check on this one.
3) go to the LSO back-end and create a WBT
Do you mean creating a Course Type with Delivery Method "WBT"? if yes, I've done so. If no, then how do I do it?
4) enclose the cheked in / published content
Do you mean creating IT5006 - Course Type Content to link the content to the course type? if yes, I've done so. If no, then how do I do it?
5) try to find on the portal again
I'll ask my colleague about Step 2 and then I'll re-try again..
Thanks,
Sean

BI LSO - use of business content: problem and limitation

Hi,
we are working on BI to develop some reports from LSO data. We are using 0HR_LSO_1 and 0HR_LSO_3 for participation and resource reservation and a lot of custom datasources from infotype 1001, 1000, 1042, 5007, and so on.
We have met lot of problem in modelling a simple and flexible BI data model, because of lack of information from business content and time dependent maintenance of many information.
Just to report few of the problem we have, we notice that
1. no link between EK and D object is extracted by standard datasource, so no information is there if a D as been attemped as a single course or as a course between several from an EK object;
2. no master data is there for the 0LEARNER characteristic and no link is there with 0EMPLOYEE to better describe P object; if participant is not a P object, you don't have any information about it (!);
3.no master data is there for the 0TRAINTYPE characteristic; we needed to add lot of information to better describe the D object (!);
3. presence of 0TRAINGROUP in participation datasource may cause doubled of information (doubled count of participation) if D object is located under several L object in ovelapping time interval;
3. resource reservation datasource is not able to extract data if resource type is not defined in LSO;
4. performance is quite poor caused by lot of calculation doing by FM "read_infotype_1001" type;
5. no pre-enrolment is considered in business content;
6. no link between resource and participant is there, so you cannot provide any report of type "who partecipate to the edition with this reource type" in a simple way;
We have to develop lot of custom to handle lot of problem like those; so I would like to share experience in BI LSO data flow design and development: please let me have your observation.
thanks in advance.
L

Any experiences / contributions / documentations to share ?

LSO: Ensuring learner desktop is "LMS ready" & support plan for E-learning

We are entering a time period with a significant rollouts planned for WBT's and on-line tests. Despite the efforts of our IT organization, our end user environment isn't quite as standardized as we would like. This creates the potential that when learners go into the Learning Portal to take a WBT or on-line test, things might not work as planned, leading to learner frustration and an increased volume of support tickets.
Examples of things which could go wrong include: (1) user has a pop-up blocker turned on, (2) user might not have the Java plug-in installed for their browser (or a really old version).
So.....
1) What do you do to minimize the risk of learners running into problems?
I'm especially interested in any attempts you've made to give users information to help self-audit their own PC's in anticipation of taking E-learning.
2) What does your technical support plan look like for E-learning tickets?
What I'm interested in is what directions do you give to your Help Desk so they know under what circumstances they should route a call to a particular resource.
I would like to hear from other customers who are live with LSO (300 or above) as to how you address these items.

Variability in content and users desktops are two major issues from a support standpoint. Some of our content is internal IP and created by employees with no instructional design background. For this we provide standard templates, standard creation tools and job aids to assist in creating a WBT that allows the user to know what to expect from one to the next. For desktop issues, we often identify known issues (a WBT requires a new version of Flash plug-in for example) prior to deployment and have the specific technology pushed to all user's desktops.
For issues like pop-up blockers, we note the need to disable them completely from the users Learning Plan where they access the content since this is a common problem. As issues are identified and solutions determined, we make sure the helpdesk is notified. This is then added to their ticket management support checklist depending on the issue that was originally reported. If the helpdesk (Level 1) can't resolve the issue over the phone then they refer it to the developers (Level 2) who contact the employee directly. The developers close the loop by communicating the resolution to the helpdesk for future use.
Hope this helps.

BI Content for LSO

Hi gurus....
I am working with some standard queries from LSO in BW. Some of them are working OK , but a couple of them are not....
The Queries are:
0LSO_C01_Q0004 Training Duration
0LSO_C01_Q0014 Test Results
Both queries do not deliver information, everything is empty!!! Master Data is loaded and activated and Transactional data in de info cube has been loaded.
I was wondering if any of you have had this kind of problems with this specific standard Queries.
Thanks in advance.

Hi
Please check, report may be filtered with period or characteristic restriction if true check the cooresponding filtered values in your infoprovider.
Regards
YuvaraajP

LSO Portal: link 'confirm participation' shows up randomly

Hello,
the link 'confirm participation' shows with some participants after having finished a training, enabling them to follow it up. With other participants taking the identical training, passing and finishing it the link does not show up, so they can't follow it up. The participants all have the same auhorizations, took the training within a certain time frame and absolutely nothing has been changed in regard of training version, follow-up options etc. We're on LSO 604, SP 5 - has anyone encountered the same problem or has an idea as to what causes this random behaviour?
Thanks!

Please note that this issue comes when you have the setting in table V_LSOFUPROCESS as >
System I Follow up Course
In this case, when the first attendee is followed up, the system sets the FLUPX flag in the IT1026 i.e. course type info and the other attendees can not see the confirm participation link.
Please have the setting for followup course in the above table as
Backend I Follow up Course (for the corresponding delivery method)
and then test the scenario.
This will work correctly.
And for the courses for which the FLUPX is already set for the course, you may write down a report to uncheck the FLUPX for the particular courses.
Hope this will help you in resolving the issue.
Best Regards,
Chetan

LSO _Training Report

Similar Messages

Maybe you are looking for