Lspci does not recognise my 11g card

I've started a new Arch install on my laptop, in a separate partition form the existing Debian and Windoze. I'm using arch-0.7-beta2-base. The base install is complete, and I have network access via a PC Card wired NIC. However, I generally use this laptop wirelessly - no problem with either Debian or Windoze - but when I run lspci under Arch, I get the following:
02:00.0 Network controller: 3Com Corporation: Unknown device 6001 (rev 01)
I've had a look at /usr/share/hwdata/pcitable, and it contains the following correct information:
0x10b7 0x6001 "prism54" "3Com Corp.|3cRWE154G72 Wireless LAN adapter"
If the card worked, this wouldn't really matter, but when I modprobe the required prism54 driver, kernel.log shows the following:
Nov 29 02:10:02 myhost Loaded prism54 driver, version 1.2
Nov 29 02:10:02 myhost ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Nov 29 02:10:02 myhost eth0: islpci_open()
Nov 29 02:10:02 myhost eth0: resetting device...
Nov 29 02:10:02 myhost eth0: uploading firmware...
Nov 29 02:10:02 myhost prism54: request_firmware() failed for 'isl3890'
Nov 29 02:10:02 myhost eth0: could not upload firmware ('isl3890')
The firware file isl3890 is in the right location - /usr/lib/hotplug/firmware - and is the same as the file used under Debian, where it uploads with no problem.
Now I had Arch 0.6 on here briefly before, and the card worked fine, so is this an 0.7 beta bug? Is there anything I can do to fix it, or should I blow the partition and go back to 0.6?

Hello Kapang,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Best of luck,
Mario

Similar Messages

  • Emac does not recognise airport extreme card.

    I bought my emac less than a year ago and its running on the newest version of Mac osX. I also have a PC with broadband and a wireless router which is emitting. I was told that i needed to get an airport extreme card to let my mac use this internet aswell. I have bought the card and i installed the software on the disc and i then fitted the disc into my mac and i have checked to see that it is in firmly and so is the aerial. This said when i turn my emac on it does not search for available networks like it supposedly should and when i go into system profiler it says no information available for the airport card. I am not convinced that the disc actually installed anything onto my mac however since i cannot find any files that i would have thought would have come from the disc. Please any help would be greatly appreciated.
    Emac   Mac OS X (10.4.7)  

    P.O.R.G, Welcome to the discussion area!
    There is no need to install the software from the disc. OS X contains all of the software needed to support the AirPort Extreme card.
    The early eMac's require the original AirPort card instead of the AirPort Extreme card.
    If you are using the correct card and the card is not recognized in System Profiler, there are only 3 possibilities:
    The card is not installed properly.
    The card is defective.
    The eMac's motherboard is defective in the area interacting with the AirPort Extreme card

  • Toshiba satellite 2450-s203 does not recognise atheros wlan card

    Hi!
    I have a toshiba satellite 2450-s203 and there is an embedded atheros wlan card -somewhere in the laptop-.
    However, I am running win xp pro and the device manager DOES NOT FIND THE CARD!
    It finds the ethernet card and a 1394 net adapter!
    But not the WLAN card!!
    Any ideas?! I have downloaded the wireless card's drivers from the site but with no luck!
    What should I do?!
    thanks!

    Hi,
    The W-lan card is optional to this model eg. it's not included in all machines. You need to purchase the correct module to get W-lan to work.
    If the card would be installed in the machine, You should see either a yellow esclamation mark (!) or "unknown device" if You have uninstalled hw.
    regards
    Gandalfwhite

  • My iPhone 4 does not recognise the SIM card ater upgrading for IOS 5.1.1. What can I do?

    I upgraded mg iPhone 4 to IOS 5.1.1 yesterday. Since then it stoped recognizing the SIM card.
    Does anyone have this problem?

    HiACristina
    I have the same problem that you had. It worked for about 16 hours afetr the update but stopped. Are you with O2 by any chance? Did you have to get a replacement SIM?
    D

  • I have bought an Iphone 4 for my daughter from the apple store, I am trying to use a giff gaff sim which has been activated and has credit on it but the phone does not recognise the sim card

    I bought an Iphone 4 for my daughters birthday from the Apple shop, I am trying to use a Giff Gaff sim card which has been activated and has credit on it but the phone keeps giving me the message  "please use a compatable sim"

    Read here:
    http://support.apple.com/kb/HT5014

  • Itunes/app store suddenly does not recognise credit card security codes

    I have been using the same card for my itunes account for as long as i have had an itunes account and a personal credit card, all of a sudden about a week or so ago while trying to update some applications on my iphone it asked me to sign in and confirm my billing information, from that day on it has refused to recognise the security code for my credit card or any other credit card for that matter, has anyone else had a similar issue with billing for their app store/itunes account and if so is this something that can be fixed easily without sending the device out or going to a repair centre
    the most frustrating thing of all is all of the updates i need to install are free updates for applications that were also free :-/
    P.S. I have so far tried re-entering just the security code, the code and the numbers to the left that generally are not required, all the information pertaining to the numerical data on the card, all information in all fields (card and billing address etc.), i even tried using the other phone number for my ATT wireless account as well as my boyfriends mastercard, nothing has worked, it does not recognise the security code even though i know it is correct and has worked for other recent purchases, the odd thing is that unless i enter something wrong it oks all the other information, it's just the security code that always pops a red flag
    the specific error messages i have gotten is "security code is invalid", if my security code is invalid then why has my card worked for every other online purchase i've made recently using that security code exactly as it is printed on my card?

    This also happened to a friend of mine today as well.  Any ideas about what to do about this?

  • Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
    Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader.

  • Prem 8.0.1 does not recognise DV camera

    Adobe Premier Elements 4.0 and 8.0.1
    Windows XP SP3, AMD 5600+, 4G RAM, 1394 connection
    NVidea GeForce GT 240 video card, latest driver updates
    Sony TRV-240 Dig8 Camera
    Sony camera is recognised by Windows My Computer, AVS Video Recorder and Windows Media Encoder with capture capability.
    Premier only recognises camera as "Microsoft DV Camera and VCR" and does not capture.
    How to get Premier to recognise camera and capture video?

    Re: prem 8.0.1 does not recognise DV camera
    created by A.T. Romano in Premiere Elements - View the full discussion  
    omni60
    Premiere Elements 4 or 8.0/8.0.1 on Windows XP 32 bit.....Yes
    Are you set up with a FireWire (iLINK) connection for this DV Data capture?
    Yes, as indicated by the 1394 connection statement. 
    From the screenshot, it appears that you only have 77 GB free space at the save location for the DV data capture. Can you point the Captured Video and Captured Audio to another save location with more free hard drive space?
    Have moved to 300GB free space. no success.
    Is this a "it worked before but not now" or "it never worked before" for Premiere Elements 4 or 8.0/8.0.1?
    worked a few years ago marginally probably on Prem Elem 4.0.  Have rolled-back NVIDIA drivers to 296.10 dated 14 June 2012 with no success  
    As background if needed, please review the following Adobe document on Capture
    http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b7 9-ABF6-E9E75F498DB2.html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
    Although it targets newer versions, the principles should be applicable to Premiere Elements 4 and 8.0/8.0.1.
    Have read, no fixes.
    Please review and consider and then we can decide what next.
    Have removed NVIDIA card and am using on-board DVI port. Prem 8.0 still reports "Microsoft Dv Camera" and not Sony as other programs do. What causes Prem Elem to not report Sony DV camcorder?
    Thank you, will keep trying.  

  • Mail on my Mac Does Not Recognise my iCloud Password

    I have transferred to iCloud from MobileMe today.The first problem I have found is that mail is not getting through to my Mac because Mail is not accepting my iCloud ID, I get a message as follows:"The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “mathewson”" I know I have the right password - I have to use it to get onto this site.What can I do?

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
    Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader.

  • Whatsapp does not recognise my mobile number

    Hey there. In the group chat on the above part where the group name is, it would show which contacts are in the group chat. I can see all my friends name but it shows my number. is this normal or should my number be shown as "you"? It is as though whatsapp does not recognise my number.
    I have already went into setting, security & privacy and put in the same number in the sim card as in the whatsapp. Any solution to this or is q10 just made to be that way? Thanks.

    can people contact you? If so, then there is no specific issue.
    I don't have the answer, but maybe you will get an answer by asking directly on the WhatsApp forums.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Bios not recognising AGP graphics card?

    The first problem I experienced whilst building my new PC was that I could not enter the bios screen after installing the motherboard. I had a AGP card which I changed to another one without success. Lucky I had an old PCI graphics card and with this was able to see the bios on the display. This problem was repeated when I cleared the cmos jumper and also after I installed the latest bios (ver 1.30) which seams to indicate that the bios does not recognise my AGP graphics card. Can anyone confirm that the plug and play bios should see my nvidia Quadro FX3000 AGP card?
    My PC has MSI K8N Neo2 Platinum, A64-FX55, Nvidia Quadro FX3000, 1GB OCZ DDR ram PC3200 Platinum Dual Channel kit Rev2, Matrox RTX-100, 2x Seagate Barracuda 7200.7 120GB SATA

    Bigblair,
    I get a continuous beep as you suggested. I checked the D-bracket diagnostic LED's and found this to mean early chipsept initialisation. I suspected the wrong ram configuration and from another post found that I had wrongly inserted the dual channel ram in slots 1 and 3 instaed of 1 and 2. By correcting this the plug and play bios can now automatically see my AGP card.
    Tiresmoke,
     I had tried turning the fast writes off but that didn't work. I needed to install a PCI graphics card (default if plug and play does not work) in order to set my bios to AGP.

  • I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port.  The MacBook recognises the camera immediately. Can anyone help?

    I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port.  The MacBook recognises the camera immediately. Can anyone help?

    Thank you for your reply.  I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years.  The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import.  Now all of a sudden my iMac does not recognise the camera.  However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing.  So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years.  I can only assume that the settings on the iMac may have changed, but I cannot verify this.

  • IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

    Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

    I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

  • I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

    I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
    Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
    I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
    I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
    I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
    Please can anybody help.
    Cheers,
    Dan_nz.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

Maybe you are looking for