LT01 not executable on mobile device

We recently went live with a u201CRF warehouseu201D. The consultants are gone, and itu2019s just me the staff ABAPu2019er left. And of course, there is a problem that nobody caught in our testing phase.
We have SAP R/3 Enterprise, known locally as u201Cversion 4.7u201D.
The users have mobile devices from which they cannot execute transaction LT01 to do a bin-to-bin transfer. The screen resolution on the mobile devices has only two settings, neither of which allows for the entire LT01 screen to be visible. There is no scrolling available on the devices.
So the users have to go to a workstation to complete a bin-to-bin transfer.
It is my great and fervent hope that one of the experts here can direct me to an alternate transaction that will accomplish that which is done in LT01, yet is fully executable on the mobile devices.
The other alternatives that I can envision are not pleasant. I guess I can try to redesign LT01 so that it fits on the screen of the mobile device. Or we can go for different mobile hardware that can accommodate the LT01.
I anticipate the community responses with great eagerness.

Hi Ken
I havent worked on the scenario you have described. But with requirement mentioned by you I have a suggestion. Please check whether it should work of not.
As an immediate soluition, you can design a z transaction with screen that fits the mobile device. ( I am not sure which one you are using ) and take all the information from the user on that screen and pass it in a BDC in back ground in tcode LT01. This is the best I can think of to resolve your issue.
Regards
Yatin Thakkar

Similar Messages

HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

SetTimeout() not working on mobile devices

setTimeout() does not work on mobile devices ie. Safari on iOS 7.1.2 and Android 2.2. What is the alternative that works on mobile devices? Thank you.

Hi Carlos,
MS mobile browsers are crippled. They don't support many features known from IE. I would suggest to check MSDN for Windows Mobile documentation:
http://msdn2.microsoft.com/en-us/library/bb158486.aspx
You might also check the blog of IEmobile Team:
http://blogs.msdn.com/iemobile/default.aspx
Best regards,
Klaus

Web Pages not loading on Mobile Devices

Browsing web pages not working on mobile devices
I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
previously i had adsl from bt and didnt have these issues.
Solved!
Go to Solution.

Try turning Smart Setup off.
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
Devices where there are known to be problems include:
Some Apple devices including iPhone 5 and Apple TV
some Android smartphones
Xbox<
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

TS1567 Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all my disap

Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!

Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

Why does it say can not open iphone mobile device service not started after the udate fixes?

can someone please help after i update my soft ware to fix sum bug issues now when i hook up my iphone to my laptop it say can not open iphone mobile device is not started

Check the links listed in the More Like This box on the right of this window.

HTML5 output is not working on mobile devices, including iPads and iPhones

Hello,
I posted a question about this last week but had no reply. So I'm posting it again as it presents a serious problem for anyone wanting to publish content to mobile devices from Captivate 6.
The problem is that HTML5 quiz content runs incrediably slowly (it at all) and crashes the brower on mobile devices. I have tested this on an iPhone and 2 iPads in 2 different locations.
This is a demo that shows the problems: http://sshls-dev.port.ac.uk/captivate_problems/
(Running this demo on a standard laptop / PC will be fine and it will work perfectly. The problem only appears when the content is viewed on a mobile device).
The problem is more extreem in the 'shorthand' demo. The quiz loads up the first question and then when I press submit it either freezes or closes the browser (Safari) completly. Occasionally it will progress to questions 2 or 3 but then the same happens.
I am keen on finding an answer / workaround becuase at the moment it effectively means that Captivate cannot be used to display quizes on phones / iPads.
I would be very grateful if anyone knows how to solve this problem to let me know.
thanks,
Emily

Hi alex,
Try it with any type of android system.
regards
ferry
Op 22 feb. 2013, om 09:56 heeft Alex Pavelescu <[email protected]> het volgende geschreven:
Re: BC menu not working on mobile devices
created by Alex Pavelescu in Content Management and Modules - View the full discussion
Hi Ferry,
Just tested on an iphone 4 and it works fine. Please provide details for all the devices on which you have the issue (model type/name, os version, browser version)
Kind Regards,
Alex.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5093384#5093384
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5093384#5093384
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5093384#5093384. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Content Management and Modules by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

ITunes 12.0.1.26 does not recognize my mobile devices.

iTunes 12.0.1.26 does not recognize my mobile devices.

Hello,
I have the same experience with my iPod Classic under 12.0.1.26 under Max OS X Yosemite 10.10.2. But on another Mac with OS X 10.7.5 and iTunes 12.0.1.26 it is recognized.
Regards
mhomscheidt

TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Functional Location measuring point UOM not displayed on mobile device

Dear Experts,
I am running SAP Work Manager 6.0 with Agentry Server v6.1.4.179 and SAP ECC 6.0 with SMFND 610_700 SP01 and SMERP 610_700 SP01 and Agentry Client v6.1.3.10200 on an iPhone.
When I display from the iPhone the "Valve Water Flow in m3/h" counter, the UOM is represented as "***"
The "Pump Bearing Oil Level in mm" counter UOM is displayed properly.
The Measuring Points are associated to a FLOC. A work Order with this FLOC has been transmitted to mobile device.
Thanks for your help.
Didier.
Reading Points definition in SAP:
Reading Points on iPhone:
Tags edited by: Michael Appleby

Hi Bill,
Thanks for your reply. In fact , I have the same problem with the WPF client and if I enter a reading value, I will get the following error message during the transmit. "Unit *** is not created in language EN"
WPF client display:
Transmit error:
Agentry log:
readDataObjectMeasuringPoint::begin
BAPI::begin
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
readDataObjectMeasuringPoint::SkipReading=False
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
create::/SMERP/PM_DOMEASUREMENTDOC_CRT Connection ID: com.sap.mw.jco.JCO$Client@
42499d6d
create::Function /SMERP/PM_DOMEASUREMENTDOC_CRT created
setImportParameters::TIMESTAMP_FROM_MOBILE=20140701214858
setImportParameters::COMMIT_WAIT=X
setImportParameters::MOBILE_USER=MJONES
setImportParameters::USER_GUID=005056913EE61EE3B5A27E3E2BC46F0D
setImportParameters::MIDDLEWARE_CALL=X
setParameters::begin
setParameters::POINT=26
setParameters::IDATE=20140701
setParameters::ITIME=172024
setParameters::MDTXT=
setParameters::READR=MJONES
setParameters::RECDV=0
setParameters::RECDU=***
setParameters::RECDVI=X
setParameters::CODGR=
setParameters::VLCOD=
setParameters::CODCT=
setParameters::IV_WORK_ORDER_OBJECTNR=OR000004000293
execute::::MJONES::before BAPI execute: /SMERP/PM_DOMEASUREMENTDOC_CRT
User::rethrowException::begin
User::rethrowException::Exception caught: Unit *** is not created in language EN

IPod Nano 6g not syncing - Apple Mobile Device Support can't install

i recently got iTunes working again on my computer. my grandfather wanted me to sync his old iPod Nano, so i did that and it worked fine. i then tried to sync my own iPod Nano 6g, and it gave me the error:
"An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again.
If the problem persists, uninstall iTunes, then install iTunes again."
i tried reconnecting the iPod, of course, and then tried reinstalling iTunes, but the same error kept coming up. if i closed iTunes, then connected the iPod, i could find it in My Computer, but after opening iTunes it would give me the error and eject itself. i then tried all the stuff outlined here:
http://www.apple.com/support/itunes/ituneshelp/?kbase=TS1363&viewlocale=en_US
but that didn't help. i tried plugging the iPod into the USB ports at the back of the computer, but nope.
i soon discovered that Apple Mobile Device Support wasn't running or installed on the computer, and that that may be the source of the problem. however, i looked in my C:\Program Files\Common Files\Apple folder and there was a Apple Mobile Device folder. it didn't appear complete, though, as there wasn't the 'bin' folder needed to run AMDS properly. i renamed this Apple Mobile Device folder, adding an 'OLD' at the end, so as to not interrupt any times i would try to install AMDS in this folder properly.
i first tried a simple complete uninstall then reinstall of iTunes, but i noticed during the install that when the installer got to the stage of installing Apple Mobile Device Support, it would stop and then say 'rolling back action' and the loading bar would move backwards, before installing the rest of iTunes as normal. hence, AMDS was still uninstalled and my iPod still wasn't being recognized by iTunes.
i tried extracting the iTunesSetup.exe file, and then running the AppleMobileDeviceSupport.msi file separately, but it would give me the same rolling back action thing and it would end in 'installation interrupted, system was not modified, please try again later'. tried disabling my anti-virus then installing iTunes, then disabling my anti-virus and running the AppleMobileDeviceSupport.msi separately but nothing was different.
please help. why is Apple Mobile Device Support not installing? and is this actually the reason why my iPod is not syncing with iTunes? any insight would be appreciated. thanks.

i first tried a simple complete uninstall then reinstall of iTunes, but i noticed during the install that when the installer got to the stage of installing Apple Mobile Device Support, it would stop and then say 'rolling back action' and the loading bar would move backwards, before installing the rest of iTunes as normal. hence, AMDS was still uninstalled and my iPod still wasn't being recognized by iTunes.
On rare occasions on Windows XP systems, I've seen that effect produced when there are old files/folders for the netaapl.sys and usbaapl.sys drivers stuck down in your Windows Operating system folders. If that's afoot, the following (somewhat involved) procedure may be of some assistance:
http://discussions.apple.com/thread.jspa?messageID=11493765&#11493765

Installing update resulted in error message MS VCR80.dll not found, Apple mobile device failed to start

Can you help with error message on installing itunes on Windows XP: error message MSVCR80.dll not found. Apple Mobile Device failed to start. Error 7 Windows error 126.
Deleting itunes and reinstalling does not fix it.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Entries on desktop iCal do not sync with mobile devices.

I am running OSX 10.7.3 on my 2.8 GHz Intel Core i7 iMac. iPhone running 5.1.1
Starting recently, entries I make on my desktop iCal do not sync thru the Cloud to the browser iCloud Calendar or my iPhone Calendar or my IPad Calendar.
My email, my Contacts sync just fine.
An iCal entry on my iPhone will sync with all mobile devices and the Cloud browser but do not sync to the iMac. In fact, all transactions from any mobile device and browser based Cloud all sync just fine between devices and iMac. All but the iCal transactions. They do not sync to the iMac or from the iMac
Suggestions, please!
dan

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Bluetooth not on a mobile device

Hi there!
I am trying to get started with Bluetooth ... I made it so far, that I compiled and used a Demo (ImageServer and ImageClient, if someone knows) ...
Now I made a new Project, not an J2ME-Project, and try to get Bluetooth running on my Notebook, which has Blutooth build in. Bluetooth itself works fine, have tested with my cellphone and my pda.
This very simple code:
package bt;
import javax.bluetooth.LocalDevice;
public class Main {
    public Main() {
        try {
            LocalDevice localDevice = LocalDevice.getLocalDevice();
        } catch (Exception e) {
            System.err.println("Can't initialize bluetooth: " + e);
    public static void main(String[] args) {
        Main m = new Main();
}leads to:
Can't initialize bluetooth: javax.bluetooth.BluetoothStateExceptionI am using netbeans 5.5 and the libs from WTK 2.2
Can someone please help me?
Thanks a lot, Sascha
Message was edited by:
SaschaLR

Josh-17 wrote:
I thought maybe somewhere here would know WHY they sometimes block mobile devices from watching videos, and put out these "error messages" when the errors messages aren't even true. Why would Google do that?
No one here speaks for Google. Why don't you post this question on THEIR support forum?
Josh-17 wrote:
And I hate to ask, since this an Apple forum, but do Android devices experience these "false errors messages" as well? I know android devices generally have many 3rd party YouTube apps, so maybe they don't get the same error messages iPhone users do?
Discussion of Adroid devices is not appropriate for this forum. You have a vaild question. Post it on the Android forums.
Josh-17 wrote:
That's not cool, Google.
Addressing Google here is foolish and a waste of time. Again, find an appropriate forum on Google to provide your feedback.
Best,
GDG

Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

Hi Experts,
In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
But in SAP Bach end Measuring Documents are defined for Work Order.
can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
What functionality need to activate? How to enable this?
Thanks
Chigari

Hi Chigari
Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
Please check if this requirement is fulfilled in your case.
There is no need to modify anything in the Configuration Portal (as far as I know).
The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
Søren Hansen

LT01 not executable on mobile device

Similar Messages

Maybe you are looking for