LT2223 ThinkVision Monitor - Inbuilt Web Camera not working

Hi
I am using a LT2223zwC monitor which has a built in Web Camera but does't seems to be working - Skype cannot detect the camera and I have no idea how to get it work. Tried the Lenovo Web Conferencing from Control Panel, it only allows me to adjust the Speaker and Mic.
Any assistance is much appreicated.
Many thanks.
Gilar

Thanks For Information..
But I Am Using Microsoft Lifecam Studio Download Latest Software Microsoft life cam Version 4.25.512.0
This Is Not A Driver Issue This is Application Issue Or Windows 8.1 Issue
I Check 3 Different Camera but Any camera Not Working
I Check 3 Different Pc..
But In Windows 8.1 That Thing Not Work !
But This Thing Working Ok With Windows8
This Is Majjor Issue Of Microsoft Windows8.1
If I Download Other Store App Like Cammix The Software Give Me Hint..
Showing Me Error Like..
"windows.media.capture"media
capture is not registered, (This Error
Is Showing In Cammix Application)
And Microsoft Have To Provide Something To As...
Thank You For Support....

Similar Messages

Web cam not working on my hp pavilion13 x360

when i got my hp pavilion 13 x360 product no j4z70ea#abu the web cam was working but now i can not get it to work when i turn on cyberlink youcam 5 it just keeps saying that do i want to use hp smart view hd cam when i click yes the same message keeps comeing up and the cam is not evern listed on skyp i have tryed reinstaling the soft were but this dose not help can you please help me with this problem

Hello @drifterboy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the webcam is not working on your notebook computer, and I would be happy to be of assistance!
Since you have attempted to remove and re-install the software, I recommend returning your system back to a previous restore point when the webcam was working. This can be done by following this document on Using Microsoft System Restore (Windows 8).
If the issue persists, I also suggest performing a backup and recovery of your Operating System. This can be done by following this document on Backing Up Your Files (Windows 8), as well as Performing an HP System Recovery (Windows 8). This should help return your system back to factory defaults.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Web Cam not working on envy m6. Followed troubleshooting link already

Hi, web cam stopped working after Win 8.1 update.
Your official troubleshooting didnt help
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03430151&tmp_task=solveCategory&cc=us&dlc=en&lc...
In device manager TrueVision Hd device works properly, and windows says that drivers are up to date, and so steps in a link above are useless for me. Meanwhile Cyberlink You Cam says that my cam is not installed. What should i do? Maybe i need to revert back to win 8 (from win 8.1). How can i do tihs?
plz help

Hi FIXMYWEBCAM,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY m6 Notebook and having Webcam issues. Have you tried to uninstall the TrueVision Hd device? If you do restart the Notebook after you uninstall it. It should install the current driver for you. Have you tried to use the automated troubleshooting for Windows 8.1? Here is a document on how to restore your Windows to 8.
Hope this helps,
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Web camera not working after sowtware update

HI, there
My macbook's (core duo)camera not working after installing show leopard, can you advice if I need some other updates or anything to make it work?

Hi purduejatt, I apologize for the delayed response as I understand how important it is to have a working camera! I would suggest clearing the data in the Camera application. Press Menu>Settings>Application Manager>All>Camera>Clear data. Please keep me updated on the status as I would be more than happy to provide additional support.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

MY LAPTOP SPEAKER & WEB CAMERA NOT WORKING

DEAR SIR/MAM,
LAPTOP: HP COMPAC Presario F700
Sl No:CNF812576M
P/No:kp171PA#ACJ
1.laptop speaker not working
2.Web camera photos cant to save to any drives.
pls reply me to solve the problems.
Regards,
sureshkumar s
salem

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP 15-r250tu Notebook and issues with the WebCam and Nokia phone. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that might need updating. Here is a link to troubleshoot the Webcam in Windows 8.1. I would uninstall the software for the Webcam and download it from the document on how to reinstalling the original webcam program that came with your computer. Figure 2: Drivers and Applications Reinstall. Here is a link to help with the Nokia phone. They are the best suited to help troubleshoot their device and they would be happy to help you out. I hope this helps. Thanks.

Hp pavilion g series web cam not working

my laptop hp pavilion g series web cam is not working please help me

Refer any of the following weblinks for step by step troubleshooting to resolve the webcam issues depending on the Operating System you are using:
HP Notebook, Touch, and AiO PCs - Webcam Troubleshooting (Windows 8)
Fix various WebCam problems on notebook delivered with and still operating the Windows 8 OS.
HP Notebook, Touch, and AiO PCs - Webcam Troubleshooting (Windows 7)
Fix various WebCam problems on notebook delivered with and still operating the Windows 7 OS.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Why does my web cam not work

my new computer says i dont have web came but ido

Hi,
To provide more accurate solutions, please provide the Product#, Model# and Operating System of your notebook.
Anyways, You can try Re-installing Cyberlink Youcam Software for your Notebook from Recovery Manager.
For Windows 8:
Software and Driver installation from Recovery Manager
For Windows 7:
Software and Driver installation from Recovery Manager
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I am an HP Employee but I speak for myself and not for HP or Others.****
I work for HP.

HP Touch Smart 310-1125f All-In-One - Win 7 64-bit - Web-cam not working

Just got this system and I can't figure out how to start the web-cam. I don't know if it's the hardware, software or just me being dumb. Thanks

Howdy Happy:
No you are not dumb nor is it cam or software issue. I have addressed this issue several times in the forum. Oh how I wish the HP Moderator will post resolved answer. You found the web-cam software thats a pluss. So I can skip that. Least you found it. Slide the web-cam icon up ward and in the middle of screen and tap it. This now opens web-cam software. Your camera shoud now be on look at the center top of your computer you should see the green light on. Bottom of web-cam sceen is your control for recording. Press capture to record video and press snap shot to take picture. Side bar is additional effects you can add to your picture or video tap on your choice. To replay your vedio or picture just tap on your choice. tap on the washer like icon von this is where you set web-cam timer settings and other stuff at. You should be all set now. It only can be excessed in HP Touchsmart software window.Carousel is rotated till you find web-cam icon. Version 3 software is located on bottom row icons slide bottom row until see web-cam icon. Slide Web-cam icon up and in center screen and tap it. Tap it again if you do not see capture button. All set now have fun.

Hp pavilion g6 notebook pc 5CD2164L3D web cam not working

help with getting web cam working please

Hi Wirefly,
I would be happy to assist if needed. Please let me know what is your model number of the computer is and the WebCam. Your current operating system would be helpful too? Here is a link that will help you find your model.
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Installed Leopard and macbook internal web cam not working

Istalled Leopard a few days ago and my internal cam (macbook) went dead as soon as it was installed. I have been reviewing discussions across the mac site and tried all of the following.
Updated to 10.5.1 and then 1.1, but to no avail. I also carried out all the other resets (battery out - held power button for 5 secs) and command / option P and R - but still not detecting the camera.
Please don't tell me it is a hardware problem as it was working a few hours before with Tiger and too many people seem to have the same problem.
I would be really grateful for any other ideas? ; o (

Did you do an upgrade? If so I would make a clone of your hard drive and do a erase and install. If that does not work then bring it in to the apple store to see if they can help.

Pavilion dv2000 built in web cam not working

Hi, all-
I have recently discovered that my webcam no longer works and am wondering if this is due to a recent repair in the hard drive and motherboard this summer? I thought that maybe all it was missing were the drivers from the O/S having to be completely restored but I just downloaded the correct driver from the hp support site and then restarted the computer and the webcam still isn't apparent in the device manager. Where did it go??
Any and all help is certainly most welcome as I'd like to get back to Skype-ing.
Thanks!
-Danielle
Message Edited by midnightsun458 on 10-19-2009 09:40 PM

Goto Contol Panel -> Device Drivers
Look for a listing called 'Imaging Devices'
If it's there (probably not, since it's not working), that is your webcam (mine is a Simplo Webcam).
If not, look under the USB Devices, near the bottom of the list.
Once you've found your webcam, view its properties by double-clicking it (or highlight it and select Action ->Properties from the top menu bar).
You can try disabling/re-enabling it to see if it works. This didn't work for me.
Rollback the driver. Now see if it works. ( worked for me).
The original driver was by Sonix.
After rollback, the driver is by PCT, and now it works.
Also, I recommend ZVRS over skype.

JRMC remote monitoring for web logic not working

Hi,
I am using Oracle 1031, and JRMC version 3.0.5. I have added following option to startWebLogic.cmd - JAVA_OPTIONS=”-Djava.rmi.server.hostname=host -Xmanagement:ssl=false,authenticate=true,autodiscovery=true,port=7091 export JAVA_OPTIONS"
I am able to see my weblogic JVM when I open JRMC in local and it is seen under Discovered --> Local. When i make a new connection in Local JRMC, it throws an exception - JAVA_OPTIONS=”-Djava.rmi.server.hostname=swperfap02 -Xmanagement:ssl=false,authenticate=true,autodiscovery=true,port=7091 export JAVA_OPTIONS"
Other than this, I am trying to access this JVM from a remote machine and it shows error "Unable to connect"
Please note that machine where web logic runs is in a different network compared to remote machine.
Can you please let me know what is wrong?
Thanks,
Krupa

hi Kal,
Yes i made authentication false.
This is the configuration i used:
Oracle 1031
JRMC version 3.0.5
JAVA_OPTIONS=”-Xmanagement:ssl=false,authenticate=false,autodiscovery=true,port=7009 "
On the local I am able to see this JVM under JDP and able to make a new connection to it also.
Other than this, when I am trying to access this JVM from a remote machine and it shows following exception:
Could not open Management Console for SWPERFAP02.DOMAIN.STEELWEDGE.COM:7009.
com.jrockit.mc.rjmx.ConnectionException: Exception creating connection to: 169.254.217.151; nested exception is:
java.net.SocketException: Network is unreachable: connect
com.jrockit.mc.rjmx.ConnectionException: Exception creating connection to: 169.254.217.151; nested exception is:
java.net.SocketException: Network is unreachable: connect
at com.jrockit.mc.rjmx.ConnectionManager.connect(ConnectionManager.java:64)
at com.jrockit.mc.console.ui.handlers.StartConsoleHandler$1.preConnect(StartConsoleHandler.java:38)
at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:75)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
Caused by: java.rmi.ConnectIOException: Exception creating connection to: 169.254.217.151; nested exception is:
java.net.SocketException: Network is unreachable: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:614)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:110)
at javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Unknown Source)
at javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2327)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:277)
at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:653)
at com.jrockit.mc.rjmx.internal.RJMXConnection.establishConnection(RJMXConnection.java:613)
at com.jrockit.mc.rjmx.internal.RJMXConnection.setupServer(RJMXConnection.java:582)
at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:189)
at com.jrockit.mc.rjmx.internal.DefaultConnectionHandle.establishConnection(DefaultConnectionHandle.java:92)
at com.jrockit.mc.rjmx.internal.DefaultConnectionHandle.connect(DefaultConnectionHandle.java:117)
at com.jrockit.mc.rjmx.ConnectionManager.innerConnect(ConnectionManager.java:91)
at com.jrockit.mc.rjmx.ConnectionManager.connect(ConnectionManager.java:62)
... 3 more
Caused by: java.net.SocketException: Network is unreachable: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:110)
at javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Unknown Source)
at javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2327)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:277)
at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:652)
at com.jrockit.mc.rjmx.internal.RJMXConnection.establishConnection(RJMXConnection.java:613)
at com.jrockit.mc.rjmx.internal.RJMXConnection.setupServer(RJMXConnection.java:582)
at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:188)
at com.jrockit.mc.rjmx.internal.DefaultConnectionHandle.establishConnection(DefaultConnectionHandle.java:92)
at com.jrockit.mc.rjmx.internal.DefaultConnectionHandle.connect(DefaultConnectionHandle.java:116)
... 5 more
Please note that machine where web logic runs is in a different network compared to remote machine.
Can you please let me know what is wrong?
Thanks
Krupa

Built in web camera not working. Ive tried everything

It says there is no camera connected. One day it just stoped working. It doesnt work on skype, facetime, photoboth, etc. On every account it says that. i have reset it many times but it still says no camera connected, even with i look at the system Preferences. I NEED HELP!!!!!

Click  in the menu bar.
About This Mac > More Info.. > System Report > Hardware > USB > FaceTime HD Camera(built-in)
Is the camera listed?
If it is listed, try reset PRAM and SMC.
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.

HP Pavilion dv9660ev Web Cam not working in any program.

The laptop in question is an HP Pavilion dv9660ev with a fresh Windows 7 ultimate 64 Bit install. I downloaded quickplay and searched many forums about the issue and can't find a solution. QuickPlay says that the webcam is in use, whereas Skype and Windows Live Messenger don't even have it listed. Please help. I really like the laptop and wanted to make video calls with it.
Thank you in advance.

Integrated webcams are usually specially made to fit the bezel or LCD panel of the notebook.
The issue described is a driver issue.
It does not seem that any Windows 7 64bit drivers were made for this notebook.
You can try Vista 64bit drivers, but I did not see any webcam drivers listed.
More than likely, the webcam just won't work with Windows 7 as it wasn't really designed for it.
Using a driver for a different operating system that what is being used is really a hit or miss with no guarantee of functionality.
However, there is a small chance that there may be a driver somewhere out there that will work. Go to Start and search for Device Manager at the bottom and open it.
There should be an imaging section of hardware listed as long as Windows is using a generic Microsoft driver. Expand this category. Is there something that is identified as a webcam? If so, double-click it and go tot he Details tab. Change property to Hardware Ids and let me know what value it has listed.
The screen should look something like this image.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Built in web cam not working. help!

I currently have a Macbook pro with Mac OS X (10.6.4) and for some reason the webcam will not let me see myself. I have had chats with both Skype and through ichat with video working but i can only see the other party. For some reason I can't see myself. Any thoughts or suggestions. If i can't figure it out soon I'll have to take it to the apple store to see what they can do.
Thanks!

Can you see yourself with PhotoBooth ? If so then it's just the settings/configuration on the other software you're using that's the issue ...
If not then it could be a hardware problem and Apple need to take a look.

LT2223 ThinkVision Monitor - Inbuilt Web Camera not working

Similar Messages

Maybe you are looking for