LTA is getting Double when EE changes Department /Designation in mid of the

Hi Sapiants,
LTA amount is getting Double when EE changes Department /Designation in mid of the month. what is the reason behind this problem.
Regards
vinmax

Dear Delik,
Now double appearance of LTA amount is gone by assigning the spec . to Pr.Cl. - 06 .Your answer helped buddy in this egard. but a new problem is coming. system is populaating some amount with a wagetype. though it is not part of IT 0008.
Thanx
Vinmax
Edited by: kvin kvin on Jul 25, 2008 12:28 PM
Edited by: kvin kvin on Jul 25, 2008 12:29 PM

Similar Messages

How to get value when OAMessageLovInputBean Change

How to get value when OAMessageLovInputBean Change
I want to get lov value atfer user select value return page

As you wanna get the value in process form request, get the value from the VO column attached to the bean, if not you can attach a tranient Vo attribute!
--Mukul

I get this when try to verify my id on FaceTime: the server rencountered an error processing registration please try again later.

I get this when try to verify my id on FaceTime: the server rencountered an error processing registration please try again later.

While we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac

Hi, I have iphone 4s and is up to date with ios7 but when I change my ring tone again ring the default ring tone

Hi, I have iphone 4s and is up to date with ios7 but when I change my ring tone again ring the default ring tone
in the setting shows the ring tone i,ve chosen

I have been on chat and a telephone conversation with my internet provider SHAW.CA and they cannot seem to assit.
I do appreciate your replies. When you talk about Exchange Server, do you mean"Microsoft Exchange" because that is what I used to set up mail on iPhone? I also tried iCloud, but i did not like the way you have to choose sending "from" each time you send an email. I currently use 2 accounts,one for business, one personal.
In response to your above reply; I went to "mailbox" - sycronise account", but nothing happened.
Am I missing some other setting perhaps. I did "enable mobile" on internet provider webmail.

POC Value getting doubled when I run CNE1

Hi,
When ever I run CNE1 ( Progress analsis ) the POC vaue is getting doubled. If any one come across this issue, Please provide me a suggestion.
I could not find any relavant notes also.
Thanks & Regards
Thiru

Hi ,
Thaks to all..
After reconstructing the database, the POC values are got changed..
But still there is issue again after the Execution of CNE1, the valuse are getting multiplied.
Thanks & Regards
Thiru

[Solvd]XFCE mixer panel plugin doesn't get updated when volume changed

XFCE audio mixer panel plugin used to show the correct volume when I change the volume either with my Laptop touchbuttons or keyboard volume buttons.
1. To make sure if I am actually changing the volume, I opened alsamixer and tested pressing keys they work fine.
2. I even opened properties option from the indicator and set it to "Master"(the one I use) of my speaker, still no luck.
3. The only problem is the indicator doesnt update when the volume is changed or muted.
But for unknow reason this problem started last week.
Thanks for the help.
Last edited by vikyboss (2013-06-23 16:27:36)

vikyboss wrote:
Actually the problem seems to be resolved. I have a fully updated system and installed xfce again few days ago. And it works miraculously..
Installed versions:
1. xfce4-mixer 4.10.0
2. Advanced Linux Sound Architecture Driver Version k3.9.3-1-ARCH
ravicious wrote:Oh, I actually fixed this myself yesterday. I installed pulseaudio, pulseaudio-alsa and xfce4-volumed-pulse (from AUR) and then removed volume shortcuts from xfce4-keyboard-settings. In xfce4-mixer, you just have to choose a proper playback as a sound card.
Wow, actually it now works for me, too! Amazing!

Getting dump when using do_sum in alv field cat in the output of the report

Dear Freinds,
             Iam getting the alv report when i click on the segma field (Sum) on my salary
field iam getting dump. and also if i try to print my alv output iam getting dump , only
happening to my custom report.
i have used the following code pleae correct me .
This perform is used for Layout settings
perform st_layout_build using gs_layout.
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-outputlen   = 15.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
endform.
Variant
perform st_variant_init using gs_variant g_repid.
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
     call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
Please could any one let me know why iam getting dump when iam clicking for total
on my salary field.
Regards
latha

Dear Chandu,
my code iam giving in details
types : begin of ty_output_data,
        staffno     type pernr_d,
        staffname   type emnam,
        grade       type stell,
        orgunit     type orgeh,
        orgtext     type hr_mcstext,
        psgroup     type trfgr,      " Pay Scale Group
        salary      type maxbt,       "PAD_AMT7S,
        rrefunded   type pad_amt7s,
        leavepay    type pad_amt7s,
        mshortfal   type pad_amt7s,   " Medical Shortfall
        echkshfal   type pad_amt7s,   " Execute checkup shortfall
        ofindeduc   type pad_amt7s,   " Other Finance Deduction
        mtyprem     type pad_amt7s,   " maternity premium
        vpbonus     type pad_amt7s,   " VP/Bonus
        gratuity    type pad_amt7s,   " Gratuity
        vpay        type pad_amt7s,   " Variable pay
        mallowance type pad_amt7s,   " Meal Allowance
        overtime    type pad_amt7s,   " overtime
        other       type pad_amt7s, " OTHER
        pfundeecon type pad_amt7s,   " PFund Employee's Contribution
        banktrnsfer type pad_amt7s,   " Bank Transfer
        count       type i,
        end of ty_output_data.
data : i_final         type standard table of ty_output_data.
iam getting all my data in the internal table I_FINAL.
perform get_final_alv using i_final.
form get_final_alv using   fp_i_pyrol_final type ty_t_output_data.
*local variable declarations
data : l_v_idx      type sy-tabix.
*local work areas
data : l_wa_final type ty_output_data.
g_save = 'A'.
This perform is used for Layout settings
perform st_layout_build using gs_layout.
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
Variant
perform st_variant_init using gs_variant g_repid.
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
if not fp_i_pyrol_final is initial.
    delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
    call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
endif.
endform.                    " get_final_alv
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 5.
ls_fieldcat-fieldname    = 'STAFFNAME'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffName'.
append ls_fieldcat to fp_i_fieldcat.
   clear ls_fieldcat.
ls_fieldcat-col_pos      = 4.
ls_fieldcat-fieldname    = 'STAFFNO'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffNo.'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 6.
ls_fieldcat-fieldname    = 'GRADE'.
ls_fieldcat-seltext_l    = 'Grade'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-fieldname    = 'COUNT'.
ls_fieldcat-seltext_l    = 'Headcount'.
append ls_fieldcat to fp_i_fieldcat.
if the field name is 'Salary' then do a sum on this field.
IF fp_fname = c_betrg.
    l_wa_fieldcat-do_sum    = c_x.
ENDIF.
NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 7.
ls_fieldcat-outputlen   = 20.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 9.
ls_fieldcat-fieldname    = 'LEAVEPAY'.
ls_fieldcat-seltext_l    = 'Leave Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 10.
ls_fieldcat-fieldname    = 'MSHORTFAL'.
ls_fieldcat-seltext_l    = 'Med.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 11.
ls_fieldcat-fieldname    = 'ECHKSHFAL'.
ls_fieldcat-seltext_l    = 'EX.Chckup.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 12.
ls_fieldcat-fieldname    = 'OFINDEDUC'.
ls_fieldcat-seltext_l    = 'Oth.Fin.Deduction'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 13.
ls_fieldcat-fieldname    = 'MTYPREM'.
ls_fieldcat-seltext_l    = 'Mat.Premium'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 14.
ls_fieldcat-fieldname    = 'VPBONUS'.
ls_fieldcat-seltext_l    = 'VP/Bonus'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 15.
ls_fieldcat-fieldname    = 'GRATUITY'.
ls_fieldcat-seltext_l    = 'Gratuity'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 16.
ls_fieldcat-fieldname    = 'VPAY'.
ls_fieldcat-seltext_l    = 'Variable Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 17.
ls_fieldcat-fieldname    = 'MALLOWANCE'.
ls_fieldcat-seltext_l    = 'Meal.Allowance'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 18.
ls_fieldcat-fieldname    = 'OVERTIME'.
ls_fieldcat-seltext_l    = 'Overtime'.
append ls_fieldcat to fp_i_fieldcat.
    clear ls_fieldcat.
ls_fieldcat-col_pos      = 19.
ls_fieldcat-fieldname    = 'OTHER'.
ls_fieldcat-seltext_l    = 'Other'.
append ls_fieldcat to fp_i_fieldcat.
pfundeecon
clear ls_fieldcat.
ls_fieldcat-col_pos      = 20.
ls_fieldcat-fieldname    = 'P FUND EMPLOYEES CONTRIBUTION'.
ls_fieldcat-seltext_l    = 'P.Fund.Emp.Contrib'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 21.
ls_fieldcat-fieldname    = 'BANKTRNSFER'.
ls_fieldcat-seltext_l    = 'Payment'.
append ls_fieldcat to fp_i_fieldcat.
endform.                    " st_fieldcat_init
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
      FORM TOP_OF_PAGE                                              *
form top_of_page.
data: l_i_detailheader type slis_t_listheader.
To get the header for ALV
perform detail_header changing l_i_detailheader.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary = l_i_detailheader.
endform.                    "top_of_page
form detail_header changing fp_i_detailheader type slis_t_listheader.
data: l_wa_header       type slis_listheader,
        l_v_time         type slis_edit_mask,
        l_v_date         type slis_edit_mask,
        l_v_abkrs        type char5,
        l_v_pabrj        type char8,
        l_v_pagno        type char10.
Local Constants
constants: l_c_h type char1 value 'H',
             l_c_1 type i     value '1',
             l_c_edit type char10 value '__.__.____',
             l_c_slash type c value '/'. " constant for slash
To display the report Header
l_wa_header-typ = l_c_h.
WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
write text-014 to l_wa_header-info left-justified.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To display the Page no
l_v_pagno =   sy-pagno + l_c_1.
l_wa_header-typ = c_s.
l_wa_header-key = text-008. " Page No:
l_wa_header-info = l_v_pagno.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the User ID
l_wa_header-typ = c_s.
l_wa_header-key = text-009. " User ID
l_wa_header-info = sy-uname.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the Date/Time
l_wa_header-typ = c_s.
l_wa_header-key = text-010. " Date/Time:
l_v_time = sy-uzeit.
l_v_date = sy-datum.
write: sy-uzeit to l_v_time.
write sy-datum to l_v_date using edit mask l_c_edit.
concatenate l_v_date
              l_c_slash
              l_v_time into l_wa_header-info+0(25) separated by space.
append l_wa_header to fp_i_detailheader.
clear: l_wa_header, l_v_date.
To Display the Report Description
l_wa_header-typ = c_s.
l_wa_header-key = text-011.                " Report Description
l_wa_header-info = text-012.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
append l_wa_header to fp_i_detailheader.
endform.                    " detail_header
I will be greatful if any one can please help me in removing me the dump.
REGARDS
LATHA.

I get this when i try to add photo to iphoto:The disk containing your iPhoto library is running low on space.

i get this message when i try to add photo to iphoto: The disk containing your iphoto is running low on space

1 - NEVER assume - it makes an "*** out of u & me"
2 - for the third time - how much space do you have on the drive where your iPhoto library is located?
If you continue to refuse to answer that simple question then no one can halp
LN
PS - your iPhoto library is NEVER automatically moved anywhere - to move it
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATa?, WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATA?

why my iphone 4s getting hot when using 3g plus with data?
then my phone left side speaker didnt work when i list songs?

It is normal for the phone to get hot when your using data such as YouTube videos, streaming music etc.. And as for the left speaker not working, the left speaker is a microphone, the right one is for sound. Don't worry, everything your iPhone is doing is normal.

Planning getting hanged when i change a member hierarchy

Hi,
When i try to change the hierarchy of a member by cutting and pasting it or through outlineload.cmd, planning is getting hanged. I get java heap space error. We have set the intial and max heap size in the registry as
1. Initial heap size = -Xms1024m
2. Max heap size = -Xmx1024m
Even the planning service is not responding. And planning web is not even opening now.
There is another entry in the registry named JVMOption10 = -Xss256k.
What has to be done?
Regards,
Ragav.
Edited by: ragavhere on Mar 25, 2011 6:52 PM
Edited by: ragavhere on Mar 25, 2011 7:01 PM

Hi John,
There was workflow enabled for a particular scenario. I've cleared it. Now i am able to delete. Thanks a lot.
But otherwise when workflow is enabled and if i have to change the hierarchy, how is this scenario managed? Is this the only way?
Regards,
Ragav.

Named tracks get renamed when you change settings

This is annoying: you carefully name all your tracks so you know what's what when mixing; but if you decide you want a different setting, and choose that for a track, that track gets renamed with the new setting's name. And with BG 09, it isn't as easy to change a region's name, as it used to be.
Any help with these issues would be greatly appreciated!

if you decide you want a different setting, and choose that for a track, that track gets renamed
that is, unfortunately, the way GB has always worked.
my only suggestion would be to copy the track name before using a preset, then ypu can paste it back in.

The Change time of the file is getting modified when no changes are made to the file content

While doing save operation of a MS-WORD file, (in my example "1M.doc" ) with client (Windows 8) and server(either Win 2008 R2 or Win2012 R2). Observing the following scenario.
After Renames are done(eg, xx.tmp renamed to 1M.doc) , all the file handles are being closed one by one.
When the xx.tmp file is closed, immediately followed by Create of 1M.doc, the LastWrite time values between Close and Create are same but LastChanged time values are different. The LastChanged and LastWrite times are noted from
the Close Response and Create Response packets.
No modification is done on the file between this last close and next create. So, why LastChanged time values are different for the file? We are observing this almost everytime with Win8- Win2k8R2/Win2012R2, but not observed
till now with Win8-Win2012.

Hi,
Is only word files have the issue? You could refer to the articles below to troubleshoot the issue:
The "Modified time" file attribute of a registry hive file is updated when an application loads and then unloads the registry hive file without making any changes on a computer that is running Windows Server 2008 R2 or Windows 7
http://support.microsoft.com/kb/983544
File “Date modified” property are not updating while modifying a file without closing it.
http://blogs.technet.com/b/asiasupp/archive/2010/12/14/file-date-modified-property-are-not-updating-while-modifying-a-file-without-closing-it.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am getting double ;; when I setup a form for Cartweaver

I have installed a full version of DW CS5 and I am trying to use Cartweaver to set up a store.
I don't think that Cartweaver is the problem. I think it is something in DW setup that is generating the problem.
Before I do the setup on the applicaiton.php file, I have this:
$cwGlobalSettings->hostname = "";
$cwGlobalSettings->database = "";
$cwGlobalSettings->databaseUsername = "";
$cwGlobalSettings->databasePassword = "";
$cwGlobalSettings->websiteURL = "";
$cwGlobalSettings->websiteSSLURL = "";
$cwGlobalSettings->onSubmitAction = "GoTo";
$cwGlobalSettings->targetResults = "results.php";
After I do the setup of the application.php file, I get this:
hostname = "local host";
$cwGlobalSettings->database = "dkselect_cw";
$cwGlobalSettings->databaseUsername = "dekselect_dan";
$cwGlobalSettings->databasePassword = "$apple3";
$cwGlobalSettings->websiteURL = "";
$cwGlobalSettings->websiteSSLURL = "";
$cwGlobalSettings->onSubmitAction = "Confirm";
Can someone tell me how to stop DW CS 5 from generating the double ;

Hi Turbo,
Could you post this to the Cartweaver Community Forum: http://forums.cartweaver.com
Or open a support ticket at: http://support.cartweaver.com
This is not something we have seen and there's a lot of developers using CW with CS5, so there must be something amiss with you install or set up. We have folks that would be happy to help.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
Shopping Cart for Adobe Dreamweaver
available in PHP, ColdFusion, and ASP
Stay updated - http://blog.cartweaver.com

Apple Mail didn't automatically get eMails when server changed

Our company (primarily PC and using Outlet for eMail) changed from the internal server of webmail.abc.com to webmail.xyz.com (not the actual ones of course) -- and my 1400 INBOX eMails and 735 SEND eMails were gone-- only the most recent ones were there.
OK so I had a copy on the Mac's HD - I imported them as Apple MAIL folders-- it took a while but NOW I SEE THAT the SEND mailbox has all the imported eMails dated with today's date, December 2, 2013. (The sidebar shows the correct date and if I forward them the date is correct, but not when I open them).
IS THERE A BETTER WAY to import (reimport?) these SEND messages?
ANOTHER PROBLEM just discovered: When I go to the OUTLOOK (by using "VIEW" on the Mac to open Windows 7 Professional on my Mac) - most of the INBOX messages and all of the SEND messages that I imported are now DUPLICATED THERE!! What a mess.
How to do this "correctly"
Any messages from today are not duplicated of course, and they have the correct date on them, so this is not a critical-critical problem, but sure is ridiculus to have duplicate messages from 1 Sept 2013 until 25 Nov 2013… And if they should change things again, I'd like to know how to import things cleanly, not like this mess…
Thanks for any comments!
Still not easy being a MacUser in a Windows world…
Steve
Monday 2 December 2013

NOTE: A typo: That should be OUTLOOK for eMail (not Outlet… I must be thinking about cyber-Monday…
Steve

Problem to get ResultSet when it is used a Date type in the query condition

hello ,
I having a bit of nightmare getting a ResultSet how result of one simple Query for a table when the condition WHERE involve a Date type.
To change the String value in a date to use in the query condition, I tried both:
String strDate = "dd/mm/yyyy";
(1.) java.sql.Date sqlDate = new java.sql.Date(strDate.getTime() )
(2.) SimpleDateFormat formatter = new SimpleDateFormat(strDate) ; sqlDate = formatter.parse(strDate);
and finally I use this code to get the ResultSet:
sql = "SELECT * FROM myTable Where (idCli = " + cd_Cli + " And dateReg = " + sqlDate + ")";
statement = connection.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
resultSet = statement.executeQuery(sql);
boolean ok = resultSet.last();
totNumberOfRegistration = resultSet.getRow();
But In both the cases I get a empty resultSet.
I shoul like if someone would look my code to say me where it is the mistake...
thank you
tonyMrsangelo
P.S. I tryed using PrepareStatement too to get the ResultSet, but in that case I couldn't use the ResultSet because executing the statement resultSet.last() I get the error: "Result set type is TYPE_FORWARD_ONLY"

In a database like Oracle, you need to use a function like TO_DATE; other databases may have something similar.
However, the proper way to do this is to use a PreparedStatement. Then you can say
PreparedStatement ps = conn.prepareStatement("update SOMETABLE set SOME_DATE=? where SOME_ID=?");
ps.setDate(1, new java.sql.Date(someJavaUtilDate.getTime()));
ps.setInt(2, theId);
ps.executeUpdate();

LTA is getting Double when EE changes Department /Designation in mid of the

Similar Messages

Maybe you are looking for