LTE band under Field test mode for ATT in Pullman, WA

Anyone knows what LTE band is being used in Pullman, WA or Moscow, ID?
I believe you can get into Field Test Mode by entering *3001#12345#* in your keypad. For Downlink Frequency, it's under UMTS Cell Environment -> UMTS RR info.
Not really sure how to convert 4385.
Thanks

The_Stick wrote:
Anyone knows what LTE band is being used in Pullman, WA or Moscow, ID?
That's more of a question for the carrier(s).

Similar Messages

Field Test Mode disabled cell network

So I was playing around with Field Test Mode today trying different bands and settings with LTE trying to get 4G to work on my Lumia 820 (I'm stuck on Edge - I have i Wireless which uses T-Mobile network I believe). Nothing was working so I tried to set it all back to the way it was before but now I have no cell coverage. Just a circle/slash over the bars. When I reboot I get a message that says the network I selected isn't available and asks me to choose another. When I choose Search Networks, I get a list that includes AT&T, Verizon, "311580", and search again.
Who can help me undo what I did to get i Wireless to show up again?

EBSkater, do you think this is the way AnandTech got their i4 to display the db signal? They didn't detail their "trick".
EBSkater wrote:
MichaelEmpire wrote:
Please tell me how on 3.1.2 ( Factory Unlocked ) to keep DBm not Bar for signnal after exiting Fielt Test Mode . Thank you.
When you're in field test mode, you hold the power key until the "Slide to Power Off" shows up. Now hold the home button until it resprings. You will now ALWAYS have the dB meter, even through updates. The only way to remove it is to restore as a new phone.
If you get an upgraded phone model and restore it with a backup from one of these phones that have the dB meter, you will transfer the dB meter to it.

IPhone Field Test Mode & PCS Readings

Greetings,
We are a subcontractor for AT&T Wireless, installing cellualar/PCS repeaters and DAS in Wisconsin. I've found the iPhone field test mode very useful in performing the site surveys.
I've got two questions, mostly related:
1) How does the FIELD TEST -> CELL INFORMATION section determine which channels to display?
2) Is there a way to force it to display the strongest PCS signal?
Many times, inside structures and in rural areas, the cellular (850MHz) signals will be much stronger than any PCS channels. It appears the iPhone displays the strongest 7 signals, regardless of frequency.
We really need a way to force the iPhone to display the strongest PCS (1950MHz) signal, instead of bumping it for 7 stronger cellular (850MHz) signals.
Any help would be greatly appreciated.
Thanks,
--Joe

It can't be done.

Field test mode signal display

Hi all,
Back in March I posted that I was having garbled and dropped calls. I still have them but my cell extender has helped some. I'm still waiting on the femtocell for a final fix in this area...
Anyway a person here suggested that I make the field test call, tap on the bars to change it to the dBm display then quit using a soft reset to leave it in that mode.
Did that and monitored signal in lots of places. I'd like to go back to the bars because in general, even though I understand dBm a picture is easier to quickly digest.
So I did field test mode, tapped to get bars then quit again using soft reset. It seems though to go back to bars then at some point it switches back over to dBm again... A soft reset will take it back to bars but then at some point dBm will appear again...
How do I get back to bar display permanently?

I am sorry but, we do no have the steps to enable the Field Test Mode on your Iphone, which relates to the technical details and signal strength on the mobile phone and network.
To ensure you have the best signal on your phone and in your area, you may benefit from a free update of your wireless phone's roaming software once a month. As Verizon Wireless continues to expand our network, it is important to update your software to receive optimal coverage when traveling.
To update your phone, please follow the simple instructions below while on the Verizon Wireless network and receiving a digital signal:
1. Power on your Verizon Wireless phone.
2. Dial *228 followed by the "Send" key.
3. When prompted, press option "2" to update your roaming capabilities.
Within two minutes, a voice recording will advise you that programming is complete. Remain on the line, as the call will disconnect automatically. I recommend you perform this update monthly or before leaving for a trip, as this will give you the ability to pick up newly acquired service areas while roaming.
If you experience any difficulty with the free software upgrade, please call us at 800-922-0204 from a landline phone, and have your wireless phone charged and available when calling.
KinquanaH_VZW

Turn Off Field Test Mode

My iPhone 4 "inherited" the Field Test Mode from my 3GS (that had been upgraded to iOS4) when I brought across my apps from the 3GS. Field Test Mode with iOS4 seems to operate on an app by app basis, rather than being able to set the signal strength bars or the dB reading and staying in the selected mode for all apps until changed.
So, after numerous searches, I can't find a clear, definitive way to turn off or delete Field Test Mode. I've tried to reset network settings and the usual reboot, etc.
I've passed on a total reset because the Field Test capability was passed from by 3GS backup to the iPhone 4.
Anyone have a clue?

EBSkater, do you think this is the way AnandTech got their i4 to display the db signal? They didn't detail their "trick".
EBSkater wrote:
MichaelEmpire wrote:
Please tell me how on 3.1.2 ( Factory Unlocked ) to keep DBm not Bar for signnal after exiting Fielt Test Mode . Thank you.
When you're in field test mode, you hold the power key until the "Slide to Power Off" shows up. Now hold the home button until it resprings. You will now ALWAYS have the dB meter, even through updates. The only way to remove it is to restore as a new phone.
If you get an upgraded phone model and restore it with a backup from one of these phones that have the dB meter, you will transfer the dB meter to it.

Field Test Mode

Anyone notice that after upgrading to 4.0 on their 3G that the signal bars are not switching back between bars and Field test mode with the db being indicated or is it just me??
Thanks
Larry

sorry, could you try and explain in more detail what you mean?

Field Test Mode Number? on OS4 *3001#12345#*

Hey gang, anyone know if there is a way to show the field test settings in OS4? I have problems with my reception everywhere, and this is very useful in determining my real signal strength. On 3.1.3 I was able to have it show as a number in the top left corner at all times. With a fresh wipe and install of V4, the field test number no longer works? Anyone have a new number or idea on this one?

{quote:title=emi975 wrote:}Also wanted to say that if you do a upgrade from 3.1.3 and not a complete new install, the indicator will stay on the top left corner.{quote}
Is this a bug or a feature?
Found this behavior on a 3G, upgraded to iOS 4, and found the behavior migrated with the backup/restore to an iPhone 4.
Apple, is there a way to surgically remove this from the backup in /Library/Application Support/MobileSync/Backups ? It would be nice to not have to reinstall everything else...

IPhone Signal Strengths - Measured Using Field Test Mode

What level of Rx field strengths are users seeing with their iPhone?
Typically I see -85 to -90 on my iPhone, however it randomly drops down to -110 to -114 for short periods of time. This happens even when I am in a stationary location. I get quite a few dropped calls, and I assume this happens when the signal drops to these low levels.Bob

got a new Phone out of apple and now i am able to get a signal at home -90 to-105 ish always got an edge conection though. Interestingly i was told by a Senior dide at apple that there have been a batch of dogey phones reliesed!! big of him! I hope its not weather related as its been clear and sunny here today as agianst throwing it down non stop for the last 2 weeks.

FIle adapter Test Mode

Hi Guys,
What are the modes available in File adapter sender and receiver mode? what is Test mode for? can you pls send me a link on file adapter attributes?
XIer

Hi,
Processing mode for File sender:
Archive
Files that have been successfully processed are moved to an archive directory.
To add a time stamp to a file name, select the Add Time Stamp indicator.
Under Archive Directory, enter the name of the archive directory.
If you want to archive the files on the FTP server, set the Archive Files on FTP Server indicator. If you do not set the indicator, the files are archived in the Adapter Engine file system.
Delete
Successfully processed files are deleted.
Test
Files are not processed.
Only use this mode to test the configurations of the file/FTP adapter or the Integration Engine/PCK. It is not suitable for productive operation.
 Set to Read-Only
Successfully processed files are given this attribute. Only writable files are processed. This selection is only available for the File System (NFS) transport protocol.
File As receiver you have FILE CONSTRUCTION MODE
Create,Append,Add Time Stamp,Add Message ID,Add Counter.
,
Cheers,
*RAJ*

AT&T Field Test Number - Improve Reception?

I don't know if this will of any help to those with recption problems or not.
http://www.wirelessinfo.com/content/inside-the-iphone-field-test-mode.htm
You call "Star3001#12345#Star" and it will put your iPhone into field test mode. Pleae take a look at the link before trying this. If you do a google search on AT&T Field Test you can find more information. This is supposed to give you tower information. Please post if you try this and find anything userful.
Message was edited by: ProfGHDorr
Message was edited by: ProfGHDorr
Message was edited by: ProfGHDorr

I was looking for this. I used it when I had a problem with my 1st Gen iPhone. The cell phone part died. I don't know if this will tell you anything with 3g or not. I know it used to work with Edge. I will take a look at it later an post back.

I'm stuck in signal strength testing mode -- is this bad?

Hey, a couple of days ago I punched in the number for testing the signal strength (3001#12345#) and now I can't seem to get out of testing mode. That is, I always have the dB number in the upper LH corner rather than bars.
I've tried passing my finger down over the dB number, which used to get me back to bars but this is no longer working. The dB numbers abide when I power down or even do the full hold-down-power-and-home-buttons-until-the-apple-disappears trick.
I'm actually OK with this (bars seem to be pretty much meaningless anyway) unless it's draining the battery or causing some other unanticipated consequence.
So... is it OK to leave the phone in dB test mode? If not, how can one get out of test mode when the obvious ways don't work?

It really isn't clear whether retaining the bars/dBM meter after pressing the home button for 5 seconds while in field test mode means that the phone is still in field test mode or just has a new meter option. When in actual field test mode, the phone can't do anything besides getting the test readings. However, there are no docs I can find that discuss it. There still could be adverse effects on battery drain or other iPhone functions.
Oh, Its actually Settings >> General >> Reset >> Reset All Settings
Message was edited by: modular747

Team Cal showing double entries for Att entered in Record Working Time

We just noticed in our QA testing that Attendances that we have included in our team calendar configuration is showing as multiple entries. Then when we check IT2002 the entries are fine. What could be causing these phantom entries to appear?
I've been looking at SPRO and PTARQ to see what could be causing it and I haven't seen anything out of the ordinary.
Thoughts?
Doug

Raja.D,
I can't think of any config that would cause the double entries. However, I am looking into the notes suggested in the replies above. In test mode for request its only showing 1 entry for each attendance, but in team calendar test it shows 2. Every attendance has one record with a request id and one without.
These attendances are entered through record working time, but are viewable through the team calendar.
Thanks,
Doug
Edited by: Doug Robbins on Feb 13, 2012 1:54 PM
Edited by: Doug Robbins on Feb 13, 2012 1:56 PM

Trouble with midi stuck in test mode

I seem to be stuck in test mode for my midi. How can I get out of this test mode?

After recharging it for at least 2 hours, do the iPod Disk Diagnostics, as posted earlier by tt2, it wont fix your problem but helps in troubleshooting.
There are 3rd Party iPod service clinic, that do free evaluation, just google for one in your Area.

SAP Cloud For Customer : Add Extension Fields under the Parameter Binding For Mashups

Hi Experts,
I have requirements for the mashups, I have created the extension field in cloud for customer "Registered Product" TI screen i want to add that newly created extension fields under the Mashup Parameter Binding List.
1) Is it possible ? If yes then How it is?
2) Any Standard process or we go for the SDK to enhance the standard screen port binding?
For more information refer the below screen.
Awaiting for your reply or suggestion....
Many Thanks,
Mithun

I have done the below changes on the custom BO.
Step 1 . In the Event Handler i have change as per the previous reply.
Step 2. Assign that Event to Import OnFire.
I am getting this error when open the Account Screen and go to that Embed Tab.
"Object [object Object] has no method 'getRawValue'".
Kindly check the above steps are correct or any step missing.
Many Thanks,
Mithun

Field test application (Engineering software) for ...

Hi,
My name is Conrad Cuatjar and I looking out for engineering software called Field Test (previously known as Net Monitor) for nokia phones 5800, for N Series, E Series.
Can you please help me out to find the way to have this software so as install in mymobile phone
Kindly advise at your ealiest convinience.
Thanks in advance for your help and support.
Regards.
Conrad Cutajar

ccuta wrote:
To whom it may concern,
T
Thanks for your prompt email.
I am asking on behalf of Network Provider in Malta called GO mobile. I am Junior Executive from Radio Planning & Development team.
Please send me how to get this software or else send me a quotation for this software.
Thanks and Regards,
Conrad Cutajar
You will have to contact your nokia representative through the official channels, regardless of who you are.
The software cannot be provided to you here, simple as that.

LTE band under Field test mode for ATT in Pullman, WA

Similar Messages

Maybe you are looking for