LTE in KANSAS CITY!!!! UP AND READY

Just noticed that Verizon appear to have brought Kansas City LTE online, my device is holding a solid 4G signal now...

Just seen this Wildman an i might have seen this back in Nov. but can't remember i would like to see LTE here in our small Community it would be really nice. And those speeds look really Good.. On my X pulling from Fort Hays State it Pinged 59ms 12.34Mbps an uploaded at 3.24Mbps An when i Tested from Independence it Pinked 70ms 11.20Mbps an Uploaded 3.36Mbps. Now for my Incredible Using Wi-Fi an using The Independence Server it Pinged 75ms DL 10.12Mbps an UL at 7.44 An when i tested it with the Fort Hays Server it Pinged at 52ms an DL at 13.76Mbps an UL at 8.43 Mbps. Just for oops an grins i tested with one more server an the one that a Cox Service Teck Suggested it was the one in Lawrence Ks. My Inc. Pinged it at 109ms DL at 15.36Mbps an UL at 8.29 Mbps Not bad for an Old Dog that's over a year old.. Now for the P.c. it Pinged the Independence server at 58ms an DL at 27.21Mbps but it could only muster a 4.29 UL-Speed My Droids spanked it in that Area for sure.

Similar Messages

What do I do to fix my iPod location. I live in Dallas, TX and my location is currently putting me in Kansas City, MO

For examplt, I go into the google maps app and initiate the location search. Even though I live in Dallas, TX 75211and I am at my home address, the maps app puts my location in at and address on E 57th Terrace in Kansas City, MO 64133. I've tried restoring my iPod, reset the wifi, reset the location and still get put in MO. I even found something about a company called Skyhook and have submitted 3 different MAC addresses in an attempt to repair this problem. I wonder why Apple seems to make it so difficult to find the correct resolution to this issue. Can anyone help me?

lllaass wrote:
Apple's database uses the MAC address of the router. The MAC address is unique to the hardware were as an IP address is not.
Not necessairly.
For example, if you are using DSL or ADSL, chances are your privider assigned you with a static IP address to use for your router, so in this case a specific IP address can be used to identify a specific piece of hardware.
With that being said, the actual physical location of a wireless router depends entirely on where someone put it, and the data base location information may or may not be accurate. This is why my iPhone shows up within the walls of my house and my iPod shows up about 500 feet away....
The point is moot because when trying to locate an iPod via its internet access point location, that location information is based on data derived from human sources. For example, how much distance is there between 200 Booger Lane and 210 Booger Lane? Cell triangulation will always be more accurate...
With that all being said, I just had an idea. What happens when you use Find My Phone to locate your iPod?
Maybe the problem is with Google....

Kansas city Local tax

Hi Experts,
Request for your assistance.
Currently the tax for kansas city, MO (MO01 tax code) is being calculated on 1 % of taxable wages (/701) = /701 X 1%
But the calculation should happen by adding wage type /Q01 too.
i.e /701 + /Q01 X 1%
How can this be done?
Thanks
Karthick.

Thanks G.Lakshmipathi,
If i understood you correctly Condition type UTXJ is attached to my client specific pricing procedure and all i have to do is:
a) maintain the various tax codes for tax procedure taxinj.
b) maintain the access sequence for condition type utxj based on the country/tax class (customer, material etc)
c) maintain the tax classification for the material and the customer.
thanks, will i need to have more than 1 tax category utxj? if i am seeing more than utxj (for example i can see jtx1 (for cst form), jtx2 (for lst form) , jtx3 (excise certificate), what does that imply Will they also need to be linked to my pricing procedure then?
Thanks again!

Best Buy - Tiffany Springs 9130 N Skyview Ave Kansas City, MO 64154

Did any one get their iPhone4's here?

Hello tjweaks,
Thank you for taking the time to visit Best Buy Unboxed to share one of your recent experiences with your local store in Tiffany Springs Store Kansas City, Missouri, which did not start too well.
Our team enjoys hearing about great customer service and we really do appreciate you taking the time to post it. I am glad that you took the time to speak with Bianca’s direct supervisor, I am sure that your feedback was appreciated and I hope it helps avoid other customers feeling the way you felt by Bianca’s service. I am thrilled that Jeromy from the Geek Squad Customer Service desk was able to rescue the day for you and turn your experience a complete 360 degrees by doing what he knows how to do best.
Thank you again for posting your experience with our team.
Have a fantastic afternoon!
Karina|Social Media Specialist | Best Buy® Corporate
Private Message

I just started a free trial of the Adobe XI product that allows me to create an editable PDF. I'm done creating the form and ready to export it. When I click Export PDF from the File menu, it says Adobe encountered an unexpected error. What am I doing wro

I just started a free trial of the Adobe XI product that allows me to create an editable PDF. I'm done creating the form and ready to export it. When I click Export PDF from the File menu, it says Adobe encountered an unexpected error. What am I doing wrong?

Good to know — there is no such application as "Adobe XI".
"Adobe" is the name of the company.
"XI" is indicative of the use of either Acrobat XI or Reader XI.
Neither Acrobat XI Pro (for which Adobe provides a free, fully functional 30-day trial) nor Adobe Reader XI (the free to download and use PDF viewer that Adobe provides) have an "Export PDF" entry under "File".
"Export PDF" only is present in Adobe Reader XI over on the right on the "Tools" panel.
The "Tools" panel provides a way for a user of Adobe Reader XI to connect to various By Subscription online services (gotta pay eh).
Export PDF is one of these. A subscription lets you send a PDF file to the online internet service (aka "cloud" service). The service then exports to a supported file format (Word / Excel / ...) and the user selects / directs where the output file is to be saved on the user's local machine.
Of course to use any of the online subscription services one must have an active (paid up in full) subscription to the service.
So ---- As described the puzzle pieces don't fit eh.
What specific Adobe (the company) applications are you using?
Acrobat XI Pro? Adobe Reader XI? Both?
Be well....

I just upgraded my ipad OS and now my ipad is not picking up the 3G network. Why and how do I fix this? When I go into cellular data and view account it says my ipad is activated and ready to go. What gives???

Why and how do I fix this? When I go into cellular data and view account it says my ipad is activated and ready to go. What gives???
It was working fine up until I upgraded the OS which I hadn't done in many versions so the ipad was not working as well as it should. Now it is searching for the network.
.

Hello noodles074!
Let's get your device working again! It's possible that your device just needs to be reprovisioned on our network. Please go to Settings>General>Reset>Subscriber Services>Reprovision Account. This may take several minutes. After allowing about 5 minutes for completion, please power your iPad off and back on, and test it again. Let us know if this takes care of it!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

How do i get itunes or any other program for ipod to play one song and then stop instead of contiuing playing. I need it to be in the same playlist and ready to play the next song when I press play?

how do i get itunes or any other program for ipod to play one song and then stop instead of contiuing playing. I need it to be in the same playlist and ready to play the next song when I press play?

Good luck. I tried to do this to cue sound effects for a theater, and never found anything. iTunes will definitely *not* do this, nor was I able to find any player that would play one song at a time in a single playlist.
In my case, I ended up using AutoHotkey to tie individual tracks to the keys on an external keypad. This was an excellent solution for my problem, but I don't think AHK runs on Macs.
One workaround is to make a folder, and fill it with *shortcuts* to the songs you want (ie, the actual files). You can change the names to start with numbers to get them in the right order. Then if you double-click on one it will play just that song. You'll still have to double-click on each song.
Might be a good time to learn AppleScript It would also be pretty easy to write a Java app to do this.

Atlantic City, NJ and New York, NY calling area

I have search the Internet for this and have not had any real luck.
What is the local calling area for Atlantic City, NJ and New York, NY, that will not occur long distance charges.
Mainly for Atlantic City, I'm worried about if Ocean City, Wildwood, and Ventnor City are all included or not.
For New York, NY, I just need to know if the whole city local, I would assume, but New York, is setup completely different than most cities I've seen, with 5 boroughs in a city and it being fairly large with multiple area codes.
Also, all this would be the exact same at a Verizon or possibly others payphone as well as just a Verizon landline correct?

Same thing happened to me. It doesn't even matter if you ask explicitly for the weather in NYC.
I asked for the weather in "New York City" and got the results for New York, TX.
I then asked for the weather in "New York City, New York" and got the same results for New York, TX.
Than I asked "What is the weather today in New York City in the state of New York?" and got the weather for New York, TX.
I asked for "Manhattan, New York" and got the weather for TX.
But when I asked for the weather in Brooklyn... I got the weather for Brooklyn, OH.
Pretty impressive.

Getting agent status running and ready..

Hi
All,
I have OMS 10.2.0.2 on win 2003 and agent 10.1.0.4 on AIX 5.2
Getting status running and ready when I do
emctl status agent..
$ emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u07/app/oracle/product/10.2.0/moe.wsi.com_OWSIDEV
Agent binaries : /u07/app/oracle/product/10.2.0
Agent Process ID : 405756
Parent Process ID : 356580
Agent URL : http://moe.wsi.com:3938/emd/main
Started at : 2007-10-15 13:55:19
Started by user : oracle
Last Reload : 2007-10-15 13:55:19
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 4318
Size of XML files pending upload(MB) : 40.87
Available disk space on upload filesystem : 35.98%
Agent is Running and Ready
But it doesn't show me anything in upload and OMS version..
Here is emagent.trc file ouput
2007-10-16 08:11:37 Thread-1869 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://wsi8328-1.com:1159/em/upload: re
tStatus=-32
2007-10-16 08:11:37 Thread-1869 ERROR http: snmehl_connect: Failed to get address for wsi8328-1.com: Authoritive Answer Host not
found (error = 1)
and target.xml looks fine it contains all entry for databases.
I don't know why it's not making communication with OMS.
any help will be appreciated.
Regards,
Vishal

What happens, when you issue 'emctl upload' explicitly?
You defined a secure connection (because of HTTPS in the URL) to the OMS host,did you secure the agent? (emctl secure agent). There's another posting about upload problems:
Problem with agent10g upload
Werner

I am in pakistan city karachi and not finding in my i tunes payment type opption "none", i am in pakistan city karachi and not finding in my i tunes payment type opption "none"

i am in pakistan city karachi and not finding in my i tunes payment type opption "none", i am in pakistan city karachi and not finding in my i tunes payment type opption "none"

Hi
Go to Site Manager > Module Templates > Online Shop Layouts > Receipt Buy to locate the message that is generated.
You can customize it in any way you see fit, so you could include a script to redirect the user to another page.
Kind Regards,
Alex

Firstly Agent running and ready but 1 minutes later is not running

firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl status agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is Not Running
firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl stop agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is Not Running
firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl start agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ................................. started but not ready.
firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl status agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.4.0
OMS Version : 10.2.0.4.0
Protocol Version : 10.2.0.4.0
Agent Home : /oracle/product/10.2.0.4/agent10g/firat
Agent binaries : /oracle/product/10.2.0.4/agent10g
Agent Process ID : 23977
Parent Process ID : 23646
Agent URL : https://firat:3872/emd/main
Repository URL : https://muhtar.turktelekom.com.tr:1159/em/upload
Started at : 2008-09-11 11:29:58
Started by user : oracle
Last Reload : 2008-09-11 11:32:48
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 11
Size of XML files pending upload(MB) : 8.37
Available disk space on upload filesystem : 21.78%
Last successful heartbeat to OMS : 2008-09-11 11:32:09
Agent is Running and Ready
ooooooooooooooooooooooooooooooooooooo
1 minute later
ooooooooooooooooooooooooooooooooooooo
firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl status agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is Not Running
t:/oracle/product/10.2.0.4/agent10g/firat/sysman/log > vi emagent.log
2008-09-11 10:43:08,118 Thread-1 [Siebel Server] InstanceProperty (filesystem:logdir) is marked
OPTIONAL but is being used (00506)
2008-09-11 10:43:08,222 Thread-1 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-11 10:43:08,295 Thread-1 [E-Mail SMTP Inbound Server] InstanceProperty smtp_host) is marked OPTIONAL but is being used (00506)
2008-09-11 10:43:08,561 Thread-1 Undefined column name interval in expression active.requests
0) ? active.requests/(interval*60) : 0 (00104)2008-09-11 10:43:08,638 Thread-1 [BEA WebLogic Managed Server] InstanceProperty (version) is marked OPTIONAL but is being used (00506)
Thread-1 EMAgent abnormal terminating
please can u help me
thank you.

"emagent.trc" 1075 lines, 136000 characters
2008-09-12 14:51:52,104 Thread-1 WARN main: clear collection state due to OMS_version difference
2008-09-12 14:51:52,152 Thread-1 WARN command: Job Subsystem Timeout set at 600 seconds
2008-09-12 14:51:52,180 Thread-1 WARN upload: Upload manager has no Failure script: disabled
2008-09-12 14:51:53,111 Thread-1 WARN metadata: Metric VirtualHosts does not have any data columns
2008-09-12 14:51:53,259 Thread-1 WARN metadata: TABLE metric umsg_imap_user_count can't define table_name: mail_imap_usercount
2008-09-12 14:51:53,259 Thread-1 WARN metadata: Metric umsg_imap_user_count does not have any data columns
2008-09-12 14:51:53,260 Thread-1 WARN metadata: TABLE metric umsg_imap_db_session_count can't define table_name: umsg_imap_dbconnec
tions
2008-09-12 14:51:53,260 Thread-1 WARN metadata: Metric umsg_imap_db_session_count does not have any data columns
2008-09-12 14:51:53,260 Thread-1 WARN metadata: TABLE metric umsg_imap_socket_count can't define table_name: umsg_imap_socketcount
2008-09-12 14:51:53,261 Thread-1 WARN metadata: Metric umsg_imap_socket_count does not have any data columns
2008-09-12 14:51:53,261 Thread-1 WARN metadata: TABLE metric umsg_imap_connections can't define table_name: mail_imap_connections
2008-09-12 14:51:53,262 Thread-1 WARN metadata: TABLE metric umsg_imap_connections_lost can't define table_name: umsg_imap_connecti
ons_lost
2008-09-12 14:51:53,262 Thread-1 WARN metadata: Metric umsg_imap_connections_lost does not have any data columns
2008-09-12 14:51:53,262 Thread-1 WARN metadata: TABLE metric umsg_imap_connections_timeout can't define table_name: umsg_imap_conne
ctions_timeout
2008-09-12 14:51:53,263 Thread-1 WARN metadata: Metric umsg_imap_connections_timeout does not have any data columns
2008-09-12 14:51:53,263 Thread-1 WARN metadata: TABLE metric umsg_imap_connections_total can't define table_name: umsg_imap_connect
ions_count
2008-09-12 14:51:53,263 Thread-1 WARN metadata: Metric umsg_imap_connections_total does not have any data columns
2008-09-12 14:51:53,263 Thread-1 WARN metadata: TABLE metric umsg_imap_debug_user_list can't define table_name: mail_pop_users_list
2008-09-12 14:51:53,264 Thread-1 WARN metadata: TABLE metric umsg_imap_ds_metrics can't define table_name: mail_imap_functions
2008-09-12 14:51:53,266 Thread-1 WARN metadata: TABLE metric umsg_imap_network can't define table_name: mail_imap_network
2008-09-12 14:51:53,267 Thread-1 WARN metadata: TABLE metric umsg_imap_network_receive_bytes can't define table_name: umsg_imap_net
work_receive
2008-09-12 14:51:53,267 Thread-1 WARN metadata: Metric umsg_imap_network_receive_bytes does not have any data columns
2008-09-12 14:51:53,267 Thread-1 WARN metadata: TABLE metric umsg_imap_network_transmit_bytes can't define table_name: umsg_imap_ne
twork_transmit
2008-09-12 14:51:53,268 Thread-1 WARN metadata: Metric umsg_imap_network_transmit_bytes does not have any data columns
2008-09-12 14:51:53,269 Thread-1 WARN metadata: TABLE metric umsg_imap_command_counts can't define table_name: mail_imap_commandcou
nt
2008-09-12 14:51:53,269 Thread-1 WARN metadata: TABLE metric umsg_imap_protocol_metrics can't define table_name: umsg_imap_frequenc
ytimes
2008-09-12 14:51:53,270 Thread-1 WARN metadata: TABLE metric umsg_sps_metrics can't define table_name: mail_imap_sps
2008-09-12 14:51:53,270 Thread-1 WARN metadata: TABLE metric umsg_uptime can't define table_name: mail_imap_uptime
2008-09-12 14:51:53,539 Thread-1 WARN metadata: Name FileSystems has already been used
2008-09-12 14:51:53,539 Thread-1 WARN metadata: Name FileSystems has already been used
2008-09-12 14:51:53,896 Thread-1 WARN metadata: Metric RoutingIds does not have any data columns
2008-09-12 14:51:54,553 Thread-1 WARN metadata: Metric waiting_sessions does not have any data columns
2008-09-12 14:51:54,555 Thread-1 WARN metadata: Metric session_wait_chains does not have any data columns
2008-09-12 14:51:55,330 Thread-1 WARN engine: File=file:/oracle/product/10.2.0.4/agent10g/sysman/admin/metadata/oracle_integrationb
pm.xml,line=8: <AssocTargetInstance> is not valid element, will be ignored
2008-09-12 14:51:55,648 Thread-1 WARN engine: File=file:/oracle/product/10.2.0.4/agent10g/sysman/admin/metadata/oracle_ovf_ivr.xml,
line=398: <InstanceProperty> is not valid element, will be ignored
2008-09-12 14:51:56,539 Thread-1 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2008-09-12 14:51:56,643 Thread-1 WARN metadata: TABLE metric uptime can't define table_name: mail_pop_uptime
2008-09-12 14:51:56,644 Thread-1 WARN metadata: TABLE metric debug_usercount can't define table_name: mail_pop_users_list
2008-09-12 14:51:56,644 Thread-1 WARN metadata: TABLE metric connections can't define table_name: mail_pop_connections
2008-09-12 14:51:56,645 Thread-1 WARN metadata: TABLE metric commandcount can't define table_name: mail_pop_commandcount
2008-09-12 14:51:56,646 Thread-1 WARN metadata: TABLE metric spsstats can't define table_name: mail_pop_sps
2008-09-12 14:51:56,647 Thread-1 WARN metadata: TABLE metric usercount can't define table_name: mail_pop_usercount
2008-09-12 14:51:56,647 Thread-1 WARN metadata: Metric usercount does not have any data columns
2008-09-12 14:51:56,647 Thread-1 WARN metadata: TABLE metric socketcount can't define table_name: umsg_pop_socketcount

Please can someone in Apple Help me? I simly need to talk to a person at the Kansas City Store. For the Love of God I cannot find how to do that. Would someone call me? Or email me PLEASE I want to do business with you but Im about to give up

OMG Not another **** change

call the direct number. ask the automated system for a store manager.
kansas city apple retail number
4712 Broadway St Kansas City, MO 64112
(816) 448-9200
ask automated stystem for a store manager
Peace, Clyde

HT3702 Jakarta, 05th September 2012 Subject : Can't buy the gold in crime city HD. To whom may concern : My name is Mr. Gunawan, now I was playing crime city hd, and I have buy 2 times gold in that game, using the same creadit card. but when I want t

Jakarta, 05th September 2012
Subject : Can't buy the gold in crime city HD.
To whom may concern :
My name is Mr. Gunawan, now I was playing crime city hd, and I have buy 2 times gold in that game, using the same creadit card.
but when I want to buy the third times, can't it's said "Please contact itunes support to complete this transaction"
so I was think may be something wrong with my credit card, and I direct call my credit card to check to make sure that I still have limit,
according to my credit card customer service, everthing is ok, nothing wrong with my payment, the limit is more that enough for the next transaction.
I try to buy it again, but still can't and it's said "Please contact itunes support to complete this transaction"
pls kindly advise. So I can keep continue playing playing crime city hd.
Best regards,
Gunawan
<Personal Info Edited By Host>

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your email address from your post.
You can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

US City, States and Zip database

Hi --
Does anyone know of a good source where I can find US City, State and Zip Code information that can be easily imported into an Oracle table?
Thanks,
~Christine

A simple search in Google using "city state zip database" as the keywords comes up with a pretty decent list of possibilties.
Most are for $, but if youy are serious about this, a small sum such as charged by http://www.buyzips.com/ is worth it ...

How do I know when movie is downloaded in full and ready to watch on Apple TV 3rd Gen?

I've got a brand new Apple TV Model: MD199C/A. Works great, but today I bought an ITunes movie and can't figure out if it is downloaded yet…
Apple TV immediately gave me the option to play the purchase, but I am reluctant because of past experience where I started a purchased movie and it stopped after playing for few minutes because it wasn't completely downloaded. It also started the clock ticking giving me only 48 hrs (I'm in Canada) to complete download and resume watching.
This ruined the night we had planned to watch a movie so I would love a solution where I can be sure the movie is completely downloaded and ready to watch.
Thanks.

If you want to see what your current connection is use speedtest.net
1080P content will need at least 8mbps for instant playback
Also make sure you have DNS set to auto (settings - general - network)
If you are on wifi try ethernet
Your other option would be to download to your computer and use home sharing to stream to Apple TV.

LTE in KANSAS CITY!!!! UP AND READY

Similar Messages

Maybe you are looking for