LTO not seen in Linux

I have connected a Storagetek L40 library , which is having a single Certance LTO-2 drive through a SN3300 router with a linux ES3 server.Library is seen from the OS , but not the LTO. When I'm connecting the library directly with the linux server bypassing the router , both the library and the LTO are seen from the OS. Please help to resolv the issue.
Thanks
Debabrata

Make sure that it isn't hidden from view.
http://support.apple.com/kb/HT4928

Similar Messages

MSI 990FXA-GD80 - SATA connector 5-6 not seen by Linux kernel

M-Board: MSI 990FXA-GD80 (UEFI BIOS with factory version E7640 AMSB50, indicated by green label on BIOS chip)
CPU: AMD Phneom II X6 1055T
RAM: 2 x Crucial DDR3 1333MHz 8GB REG/ECC
PSU: Fractal Design Newton R2 1000W PSU
GPU: Asus GeForce EN8600GT Silent/HTDP 512MB
Operating system Linux / kernel 2.6.39-r2
I am in the final stages of providing my new MSI 990FXA-GD80, Socket-AM3+ with all its peripherals.
I have a working main disk with a Linux/Gentoo installation, connected to SATA baoad connector 1 (the disk shows up as sda1) . Now I have added 4 other disks, all for storage purposes.
The disks connected to SATA board connector 2-4 works OK. However, when I connect the 5th disk to SATA connector number 5 it is not seen by the Linux kernel. It is not seen in connector number 6 either. I have checked that the disk itself and its SATA cable is OK by connecting it to SATA connector number 4 (temporarily disconnecting one of the working disks). And it is recognized there and works OK. So there is no faults in the disk and its cable.
What can be the problem? Is there a different SATA controller for connector 5-6 than for connector 1-4? Do I have to enable a different supporting module in the Linux kernel for SATA connector 5-6, than for connector 1-4?

Quote
However, when I connect the 5th disk to SATA connector number 5 it is not seen by the Linux kernel. It is not seen in connector number 6 either.
Do the drives show up anywhere else (UEFI/BIOS Setup, Boot Order etc.)?

[Solved] External USB 3.0 drive not seen under /dev/sd*

Ok, thought this would be easy but for some reason I cant get arch to see the physical drive. Its a new Seagate 2TB external USB 3.0 drive. I connected it to a windows laptop and it was quickly recognized (ntfs). I then installed ntfs-3g but still cant see it. I then formatted it under windows as ext4, but its still not seen. I tried this with 2 arch PC's, both the same issue. I seen a few other posts and tried a few things like making sure the mod xhci_hcd was running. I have the latest updates on each system. fdisk -l does not show the device at all! I can see and boot to other USB devices fine just not this one, maybe since its USB3.0??
I noticed here, they talk about maybe USB3 is broke in the new kernels, after 3.10.2 maybe?
Similar issue: https://bbs.archlinux.org/viewtopic.php?id=126299
Possible bug: https://bugs.archlinux.org/task/36296
However, I would think that by now, this would have been fixed as USB3.0 is more common? Other than trying to find a OLD 3.10.2 kernel any other advice?
dmesg:
[47653.187708] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[48258.419876] r8169 0000:02:00.0 enp2s0: link down
[48435.623148] usb 6-1: USB disconnect, device number 2
[48697.691980] usb 6-1: new SuperSpeed USB device number 3 using xhci_hcd
[48938.171094] usb 6-1: USB disconnect, device number 3
[48975.057438] r8169 0000:02:00.0 enp2s0: link up
uname -a
Linux 3.15.7-1-ARCH #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014 x86_64 GNU/Linux
lsusb: (Seagate USB)
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 003: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 007 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 004: ID 0bc2:ab20 Seagate RSS LLC
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 002: ID 05af:8366 Jing-Mold Enterprise Co., Ltd
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod:
Module Size Used by
uvcvideo 74983 0
videobuf2_vmalloc 3368 1 uvcvideo
videobuf2_memops 2239 1 videobuf2_vmalloc
videobuf2_core 30407 1 uvcvideo
snd_usb_audio 131860 0
videodev 123032 2 uvcvideo,videobuf2_core
snd_usbmidi_lib 21428 1 snd_usb_audio
snd_rawmidi 20278 1 snd_usbmidi_lib
media 12611 2 uvcvideo,videodev
snd_seq_device 5244 1 snd_rawmidi
mousedev 10912 0
evdev 11784 8
mac_hid 3273 0
kvm_amd 52987 0
kvm 408583 1 kvm_amd
microcode 17157 0
serio_raw 5073 0
pcspkr 2059 0
k10temp 3242 0
snd_hda_codec_realtek 54803 1
r8169 59191 0
snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
mii 4251 1 r8169
shpchp 25706 0
snd_hda_codec_hdmi 40396 1
radeon 1361721 21
snd_hda_intel 22831 1
snd_hda_controller 22975 1 snd_hda_intel
snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
ttm 67215 1 radeon
snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
snd_pcm 83207 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 19294 1 snd_pcm
drm_kms_helper 39643 1 radeon
snd 61276 14 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
tpm_infineon 7786 0
tpm_tis 9310 0
soundcore 5551 2 snd,snd_hda_codec
tpm 23363 2 tpm_tis,tpm_infineon
hwmon 3346 2 k10temp,radeon
i2c_algo_bit 5480 1 radeon
i2c_piix4 10801 0
button 4765 0
processor 25153 0
vboxvideo 2029 0
drm 244846 25 ttm,drm_kms_helper,radeon,vboxvideo
i2c_core 41648 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
pci_stub 1381 1
vboxpci 15059 0
vboxnetflt 17700 0
vboxnetadp 18547 0
vboxdrv 345858 3 vboxnetadp,vboxnetflt,vboxpci
ext4 494420 3
crc16 1359 1 ext4
mbcache 9155 1 ext4
jbd2 82948 1 ext4
sd_mod 37554 4
sr_mod 15026 0
crc_t10dif 1135 1 sd_mod
cdrom 35191 1 sr_mod
crct10dif_common 1436 1 crc_t10dif
ata_generic 3434 0
pata_acpi 3579 0
hid_generic 1217 0
usbhid 41250 0
hid 93052 2 hid_generic,usbhid
atkbd 17006 0
libps2 4571 1 atkbd
i8042 13666 1 libps2
serio 11018 4 serio_raw,atkbd,i8042
pata_atiixp 5163 0
ohci_pci 4192 0
ehci_pci 4152 0
ohci_hcd 35606 1 ohci_pci
ehci_hcd 64619 1 ehci_pci
ahci 24299 3
libahci 21772 1 ahci
xhci_hcd 149286 0
libata 174089 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
usbcore 188509 9 snd_usb_audio,uvcvideo,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
scsi_mod 138333 3 libata,sd_mod,sr_mod
usb_common 1712 1 usbcore
Last edited by banshee28 (2014-08-05 02:27:01)

R00KIE wrote:
Make sure you haven't blacklisted the uas driver. If the uas driver does not work well for you, check here [1] how to disable it for a particular drive.
[1] https://bbs.archlinux.org/viewtopic.php?id=183190
Awesome, THANKS!! Yes I got it to work following this and specifically Da_Coynul's post:
I was able to get my external drive working again by telling the usb-storage module to ignore uas for the device. Here is how to do it:
First, create a file named ignore_uas.conf in the /etc/modprobe.d directory containing the following*:
options usb-storage quirks=Vendor_ID:Product_ID:u
*(substitute your actual Vendor_ID and Product_ID obtained from the lsusb -v command).
Next, regenerate your inital ramdisk:
# mkinitcpio -p linux
Finally, reboot your computer.
Although this is not a solution to broken uas, at least it will let you use your drive as before hmm
https://bbs.archlinux.org/viewtopic.php … 2#p1428782
Thanks everyone...Now I can see the drive, and will work on formatting it with XFS...

Not-installable Oracle Linux (and RH too)

Hello
I've downloaded 4 CDs of Linux on edelivery and burnt them as ISO.
The first CD boots..i'm happy
I select french for language and keyboard.
Then the installer asks for me to choose the source for packages. I choose CD-ROM
Then i have the error: no CD-ROM found.
It sucks
I go back to Windows, hoping someone has a tip
thanks

At what step exactly are you having the problem?
I have not seen the screen where you choose the source for packages.
When the first cdrom boots I get the following screens in order:
1. boot:
2. CD found (here you can test the media)
3. Welcome to Enterprise Linux
4. Language Selection
5. Keyboard configuration
6. Installation Type (server/workstation/...)
7. Disk Partitioning Setup
Then the installation proceeds successfully.
I tried to install the french version also and it proceeds to step 6 above without asking for source of the packages as indicated by you. Please update.

Java not working on Linux? Expert answer needed!

I am trying to run Java 1.4.2 on Linux (Slackware Live). It works, until I try to do something with the GUI, then I get
"current locale is not supported in X11, locale is set to CX locale modifiers are not supported"
I have seen tons of this question posted on the web, but no answer. Any help on how to run a GUI Java application on Linux would be greatly appreciated!

I guess I better go close that Java program that's
running on the Linux machine I'm currently using. No
one told it that Java doesn't work on Linux.
Or, just consider yourself lucky, because luck seems to be a big part of it. To claim everything is ok because it works on your Linux version does not mean something is not broken in general.
Is it really OK that Java cannot be run in some countries? To me it is ridiculous, and I spent so much time figuring this thing out as it makes no sense.
I have scanned the 'net for this problem up and down, and it is a very common one, but noone has come up with a concrete solution. "It works for me" is not a solution, and not helpful. Being ironic about it is even less helpful.
If you have a concrete solution, please come with it, you would be the only one in the world able to give a clear answer and not just general things like "change the locale to something that works". I figured so much already, but how?? Not even hardcore Linux ppl has been able to come up with an answer.

Ipod not seen by windows or itunes

Hello, I'm totally frustrated and have been searching for hours. Please someone help.
- Nano 8 gb
- Windows xp
Neither Windows (my computer) nor Itunes sees my ipod. Ipod is working fine: did the menu/select thing, cable is good.
When I plug the ipod in the usb port I hear a bleep and I get a message bottom right "new hardware found ipod"and the icon is a usb cable. Ipod is not in My computer window. Ipod is not seen by Itunes
Tried Device Manager/I see Ipod with a ? Yellow. If i right click on it and do update driver the ms computer management system crashes and sends error report.
I tried dowloading the USB driver and placing it in the directory, but I got stuck because there is no windows/inf directory. I tried to update the usb driver with the same ms crash.
I'm completely frustrated, please can someone help me.

I was having the same problem the other day. I'm not sure what it was but I think it has something to do with the i tunes and i pod 1.2 update.
What I did was:
1. Uninstall i tunes
2. Restart my computer
3. pluged my ipod in a slow usb line
4. waited until my pc recognized it in there. It took a little while.
5. re installed i tunes from apple.com
6. waited until i tunes recognized my ipod
7. updated my i pod with my library it took a long time because i was in the slow usb plug.
8. re plugged my ipod into a 2.0 usb line
9. i tunes recognized it.
10. I then updated my ipod to the new 1.2 version
11. The problem started happening again
12 I repeated what I did before and now it is working.
It was very frustrating! I hope it works for you.1

5th Gen IPOD - Won't Sync and Not Seen by Windows

Help!!!
Tried the 5 R's. I have the IPOD in Disk Mode but whilst it will happily charge, it still is not seen by ITunes or Windows Explorer (though is visible inDisk Defragmenter). I have already un-installed and re-installed ITunes etc.
Prior to putting it into Disk Mode the IPOD still had my library on it and owuld happily work.

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

IPod touch: Seen by XP, not seen on OSX.

Strange one.
1st Gen ipod Touch with latest software(think its 3.3), latest version of itunes.
Its seen and works perfect with Windows XP.
I plug it into my Mac Book Pro, running Lion and its not seen. nothing happens wihen i plug it in.
I have reset, restored and wiped the ipod from the device itself and its still not seen.
I also tried it on a Win 7 machine and its NOT seen either.
Is this something crazy to do with 32bit architecture. Its seen on Win XP which is 32 but not by 64bit Lion and Win 7.
Any suggestions?

Have a Look Here
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Attachments and history of my emails are not seen by Windows users

attachments and history of my emails are not seen by Windows users

Just guessing at what you mean, try this:
In Mail, while composing a message, go to Mail's menu and click:
Edit > Attachments > Always send Windows-friendly attachments

In my iPad mini some apps are not seen (voice recorder, calculator, compass etc)

in my iPad mini some apps are not seen (voice recorder, calculator, compass etc)er

Those apps aren't included in iOS on iPads
iPad Mini built-in apps : http://www.apple.com/ipad-mini/built-in-apps/
iPad manual (which has a chapter on each of the built-in apps) : http://support.apple.com/manuals/ipad/

Report buildr not opening in Linux

rwbuilder.sh is not executing in linux
error message displayed is /bin/reports.sh no such file or directory
is rwbuilber.sh is the file to run reports in linux Os or is it a different file

Duplicate post (please post only once):
EBS forms not opening in Linux client machine
EBS forms not opening in Linux client machine

Why my RMI is not Working in Linux???

Hiii how ru?
I am Rahul here
Well I have a problem that my RMI in not working on Linux.. so can u tell me the solution to my problem???
When i am typing following command i am getting exception as RmiNotBoundException
java -Djava.security.policy=my.policy ChaClient&
however my Server is Starting normally but client is not connection to server.
so please tell me the solution to this problem
U can contact me at
[email protected]
[email protected]
Thank u Very much...

i ran into the same issue dealing with RMI and Linux. My issue was the the stub that linux was giving you gave in the host field the ip number of "127.0.0.1" which tried to make the client connect to itself. this is how i got around it:
java -Djava.rmi.server.hostname=<ip that other clients will connect to>
so, for instance, if on a client you connect to the server with an IP of 10.5.0.1, then when starting up the java vm, you start it
java -Djava.rmi.server.hostname=10.5.0.1
hopefully that helps

Data of measure is not seen in webi report when drill is disabled

Hi
i have created a hierarchy in universe on which i drill down in webi reports
the problem is that i have drilled my report till the last level and saved it
the object on which im drilling is set as a section in the report
so i have added a measure in the table under that section
now the measure has different value at different level of drillings
i.e for the last level of the drill i use one measure and after that as i drill up i use different measure
for all other level of drilling
every thing is working fine but the problem is
when i open report in view mode
the measure data is not seen
only when i enable drill the measure data is seen
i have done something like thi
i have used drillfilters in webi reports for checking which level we are in drill mode so as to display the measure value based on drill level

Seems like DrillFilters needs the drillmode to work fine..
why don't save the report with the drill button enabled?

After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?

After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?

Augend wrote:
After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?
There have been a few threads about this. The feature seems to have gone missing in Mountain Lion even though the Help for Preview still mentions it.
I've filed a bug report on it.
Matt

LTO not seen in Linux

Similar Messages

Maybe you are looking for