LU allocate xlate failed

I have two ASA5510 firewalls
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(9)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
failover mode is A/S
The standby firewall always appears these logs
Apr 18 2014 16:21:53: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:22:08: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:22:23: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:22:38: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:22:53: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:23:08: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:23:23: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:23:38: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:24:08: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:24:23: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:25:39: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:26:24: %ASA-3-210007: LU allocate xlate failed
Apr 18 2014 16:27:09: %ASA-3-210007: LU allocate xlate failed
Datecenter's ASA5520 has the same problem
I don't know the reason why

I'm sorry i did not reply immediately !
i had checked the memory.
The result show me that not only primary but also secondary both of them have enough memory
Paimary firewall
JP-FW# sh memory
Free memory:         754458944 bytes (70%)
Used memory:         319282880 bytes (30%)
Total memory:       1073741824 bytes (100%)
Secoundary firewall
JP-FW# sh memory
Free memory:         763603096 bytes (71%)
Used memory:         310138728 bytes (29%)
Total memory:       1073741824 bytes (100%)
I had vpn configuration so I use static nat and nat exemption at one time.
but i don't know whether it was overlap or not
following is my configuration
Static NAT
object network 70.77
 nat (inside,outside) static 82.100 service tcp www www
object network 70.80
 nat (inside,outside) static 82.100 service tcp 2302 2302
object network 70.80_3306
 nat (inside,outside) static 82.100 service tcp 3306 3306
OBJECT
object network local-lan
 subnet 10.192.64.0 255.255.248.0
object network ssl
 subnet 10.10.10.0 255.255.255.0
object network narita
 subnet 10.192.72.0 255.255.248.0
object network asakusa
 subnet 10.192.1.0 255.255.255.0
object network nogedaira
 subnet 10.192.128.0 255.255.255.0
object network hangyou
 subnet 192.168.0.0 255.255.0.0
NAT EXEMPTION
nat (inside,outside) source static local-lan local-lan destination static ssl ssl
nat (inside,outside) source static local-lan local-lan destination static narita narita
nat (inside,outside) source static local-lan local-lan destination static asakusa asakusa
nat (inside,outside) source static local-lan local-lan destination static hangyou hangyou
nat (inside,outside) source static local-lan local-lan destination static nogedaira nogedaira

Similar Messages

  • ASA 5520 - LU allocate xlate failed - Failover unit reloads

    We just had an issue with our failover unit reloading. In perusing the logs there were a number of %ASA-3-210007: LU allocate xlate failed, errors prior to the reload. These units had just had their OS upgraded to fix a DOS issue a few weeks ago. I have not seen the error since it reloaded. However, I was asked to report the issue just in case it is a bug in the new version of the OS.Two units in failover.
    Cisco Adaptive Security Appliance Software Version 8.0(5)9
    Device Manager Version 6.0(2)
    Compiled on Mon 01-Feb-10 10:36 by builders
    System image file is "disk0:/asa805-9-k8.bin"
    Config file at boot was "startup-config"
    CP-ASA up 17 days 21 hours
    failover cluster up 17 days 22 hours
    Hardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
    Internal ATA Compact Flash, 256MB
    BIOS Flash M50FW080 @ 0xffe00000, 1024KB
    Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                                 Boot microcode   :  CN1000-MC-BOOT-2.00
                                 SSL/IKE microcode:  CNLite-MC-SSLm-PLUS-2.03
                                 IPSec microcode  :  CNlite-MC-IPSECm-MAIN-2.05
    0: Ext: GigabitEthernet0/0  : address is 0025.45d7.6e62, irq 9
    1: Ext: GigabitEthernet0/1  : address is 0025.45d7.6e63, irq 9
    2: Ext: GigabitEthernet0/2  : address is 0025.45d7.6e64, irq 9
    3: Ext: GigabitEthernet0/3  : address is 0025.45d7.6e65, irq 9
    4: Ext: Management0/0       : address is 0025.45d7.6e66, irq 11
    5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
    6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
    Licensed features for this platform:
    Maximum Physical Interfaces  : Unlimited
    Maximum VLANs                : 150      
    Inside Hosts                 : Unlimited
    Failover                     : Active/Active
    VPN-DES                      : Enabled  
    VPN-3DES-AES                 : Enabled  
    Security Contexts            : 2        
    GTP/GPRS                     : Disabled 
    VPN Peers                    : 750      
    WebVPN Peers                 : 2        
    AnyConnect for Mobile        : Disabled 
    AnyConnect for Linksys phone : Disabled 
    Advanced Endpoint Assessment : Disabled 
    UC Proxy Sessions            : 2       
    This platform has an ASA 5520 VPN Plus license.
    I noted a report on errors with verison 7 and a conflict between nat(0) and static commands. I don't show nat(0) being used on these units.
    nat (public) 0 access-list NO_NAT
    nat (public) 1 10.190.16.64 255.255.255.192
    nat (public) 1 172.16.22.0 255.255.255.0
    nat (dmz) 0 access-list NO_NAT
    nat (dmz) 1 0.0.0.0 0.0.0.0
    nat (csacelb) 0 access-list NO_NAT
    nat (csacelb) 1 0.0.0.0 0.0.0.0
    nat (app) 0 access-list NO_NAT
    nat (app) 1 0.0.0.0 0.0.0.0
    nat (db) 0 access-list NO_NAT
    nat (db) 1 0.0.0.0 0.0.0.0
    nat (internal) 0 access-list NO_NAT
    nat (internal) 1 0.0.0.0 0.0.0.0
    nat (management) 0 access-list NO_NAT
    nat (management) 1 0.0.0.0 0.0.0.0
    no crypto isakmp nat-traversal
    static (app,dmz) 10.190.15.0 10.190.15.0 netmask 255.255.255.192
    static (csacelb,public) 999.999.999.999 10.190.14.70 netmask 255.255.255.255 (The external address was replaced with 999.999.999.999 intentionally for this forum)
    static (db,app) 10.190.16.0 10.190.16.0 netmask 255.255.255.192

    Do you have any solution ? we have the same problem.
    Thanks .

  • ASA %ASA-3-210007: LU allocate xlate failed

    I have a client that keeps receiving the following syslog error:
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    ASA %ASA-3-210007: LU allocate xlate failed
    It has been identified in bug report:
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    CSCsi65122 (http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi65122)
    This bug report states the following:
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    Overlapping static with NAT exemption causes xlate errors on standby
    Symptom:
    "%ASA-3-210007: LU allocate xlate failed" appearing on standby unit
    Conditions:
    - Stateful failover enabled.
    - Overlap between a static NAT rule and the NAT exemption.
    -the "alias" command is used to rewrite destination ip address
    Workaround:
    in the nat exemption access-list deny specifically the traffic matching the source of the traffic with destination the alias'd ip address.
    I looked at this bug report and it says the error was first found in 7.0/7.2.  However, the client is running 8.4(1) on the ASA's.  When this problem initially came to light, my co-worker found this bug report:
    CSCth74844
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCth74844&from=summary
    This made sense since at the time they were running 8.32 and upgrading to a newer code seemed to be how to fix it according to this article:
    http://www.techbloc.net/archives/31
    However, even after the upgrade to 8.4(1), the problem still exists.  Do we need to roll them back to the unreleased code that the above article mentions?  Or should this problem have been fixed in the 8.4(1) release?
    TIA for any ideas/suggestions.  A call to TAC may be in order for this problem, especially since the workaround doesn't seem to be the best solution.

    Deyster,
    To troubleshoot this issue, we first need to verify whether thios error message is cosmetic or are we really hitting into any known issue, to identify it, we need to fisrt verify whether the xlate tables on both the firewalls is approximate;y same or not.(you can do this by using show xlate commandf on the firewalls). If it is same  and still we are getting these messages, then it is a cvosmetic issue(which does not affect the traffic).
    This particukar message appears if the xlate tables are not correctly replicated between the active and standby unit in failover.
    I would request you to provide the below debugs:
    debug nat 5
    debug fover fail
    This would further help is in identifying the issue.
    Hope this helps.
    Thanks,
    Varun

  • Connection limits questions.

    Hi all.
    i got a crahed 5520 this week and was showing
    <163>Nov 28 2011 11:34:45: %ASA-3-201013: Per-client connection limit exceeded -125/100
    What the negative number tells ?  i usually see same numbers like 100/100 with means the connection limited has reached.
    also the box was showing
    <163>Nov 28 2011 19:51:17: %ASA-3-210007: LU allocate xlate failed
    <161>Nov 28 2011 17:50:44: %ASA-1-105005: (Primary) Lost Failover communications with mate on interface OUTSIDE
    from the last 2 log messages its showing that the box was out of resources correct ? 
    Thanks.

    The negative numbers reading is caused by a bug. Please see "CSCtl23397 - ASA may log negative values for Per-client conn limit exceeded messg".
    The 210007 message is indicating stateful failover is out of resources. See this explanation.
    Overall it appears your boxes may be pushing the limit of their capabilities connection-wise. Some further investigation would be required to determine whether that was a one-time event or indicative of a need to upgrade (memory or device).

  • Internet Access from Inside to Outside ASA 5510 ver 9.1

    Hi everyone, I need help setting up an ASA 5510 to allow all traffic going from the inside to outside so I can get internet access through it. I have worked on this for days and I have finally got traffic moving between my router and my ASA, but that is it. Everything is blocked because of NAT rules I assume.
    I get errors like this when I try Packet Tracer:
    (nat-xlate-failed) NAT failed
    (acl-drop) Flow is denied by configured rule
    Version Information:
    Cisco Adaptive Security Appliance Software Version 9.1(4)
    Device Manager Version 7.1(5)
    Compiled on Thu 05-Dec-13 19:37 by builders
    System image file is "disk0:/asa914-k8.bin"
    Here is my ASA config, all I want for this exercise is to pass traffic from the inside network to the outside to allow internet access so I can access the internet and then look for specific acl's or nat for specific services:
    Thank You!
    Config:
    ASA5510# sh running-config
    : Saved
    ASA Version 9.1(4)
    hostname ASA5510
    domain-name
    inside.int
    enable password <redacted> encrypted
    xlate per-session deny tcp any4 any4
    xlate per-session deny tcp any4 any6
    xlate per-session deny tcp any6 any4
    xlate per-session deny tcp any6 any6
    xlate per-session deny udp any4 any4 eq domain
    xlate per-session deny udp any4 any6 eq domain
    xlate per-session deny udp any6 any4 eq domain
    xlate per-session deny udp any6 any6 eq domain
    passwd <redacted> encrypted
    names
    dns-guard
    interface Ethernet0/0
    description LAN Interface
    nameif Inside
    security-level 100
    ip address 10.10.1.1 255.255.255.252
    interface Ethernet0/1
    description WAN Interface
    nameif Outside
    security-level 0
    ip address 199.199.199.123 255.255.255.240
    boot system disk0:/asa914-k8.bin
    ftp mode passive
    dns domain-lookup Outside
    dns server-group DefaultDNS
    name-server 199.199.199.4
    domain-name
    inside.int
    object network inside-net
    subnet 10.0.0.0 255.255.255.0
    description Inside Network Object
    access-list USERS standard permit 10.10.1.0 255.255.255.0
    access-list OUTSIDE-IN extended permit ip any any
    access-list INSIDE-IN extended permit ip any any
    pager lines 24
    logging enable
    logging asdm informational
    mtu Inside 1500
    mtu Outside 1500
    mtu management 1500
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-715.bin
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    nat (Inside,Outside) source dynamic any interface
    object network inside-net
      nat (Inside,Outside) dynamic interface
    access-group INSIDE-IN in interface Inside
    access-group OUTSIDE-IN in interface Outside
    router rip
    network 10.0.0.0
    network 199.199.199.0
    version 2
    no auto-summary
    route Outside 0.0.0.0 0.0.0.0 199.199.199.113 1
    route Inside 172.16.10.0 255.255.255.0 10.10.1.2 1
    route Inside 172.16.20.0 255.255.255.0 10.10.1.2 1
    route Inside 192.168.1.0 255.255.255.0 10.10.1.2 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    http server enable
    http 0.0.0.0 0.0.0.0 Inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec security-association pmtu-aging infinite
    crypto ca trustpool policy
    telnet timeout 5
    ssh 0.0.0.0 0.0.0.0 Inside
    ssh timeout 60
    ssh version 2
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    username <redacted> password <redacted> encrypted privilege 15
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns migrated_dns_map_1
      parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns migrated_dns_map_1
      inspect ftp
      inspect h323 h225
      inspect h323 ras
       inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http
    https://tools.cisco.com/its/service/oddce/services/DDCEService
       destination address email
    [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
       subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    password encryption aes
    Cryptochecksum:
    <redacted>
    : end
    SH NAT:
    ASA5510# sh nat
    Manual NAT Policies (Section 1)
    1 (Inside) to (Outside) source dynamic any interface
        translate_hits = 0, untranslate_hits = 0
    Auto NAT Policies (Section 2)
    1 (Inside) to (Outside) source dynamic inside-net interface
         translate_hits = 0, untranslate_hits = 0
    SH RUN NAT:
    ASA5510# sh run nat
    nat (Inside,Outside) source dynamic any interface
    object network inside-net
    nat (Inside,Outside) dynamic interface
    SH RUN OBJECT:
    ASA5510(config)# sh run object
    object network inside-net
    subnet 10.0.0.0 255.255.255.0
    description Inside Network Object
    Hi all,Hello everyone, I need some help before my head explodes. Idddddddd

    Hello Mitchell,
    First of all how are you testing this:
    interface Ethernet0/0
    description LAN Interface
    nameif Inside
    security-level 100
    ip address 10.10.1.1 255.255.255.252
    Take in consideration that the netmask is /30
    The Twice NAT is good, ACLs are good.
    do the following and provide us the result
    packet-tracer input inside tcp 10.10.1.2 1025 4.2.2.2 80
    packet-tracer input inside tcp 192.168.1.100 1025 4.2.2.2 80
    And provide us the result!
    Looking for some Networking Assistance? 
    Contact me directly at [email protected]
    I will fix your problem ASAP.
    Cheers,
    Julio Carvajal Segura
    Note: Check my website, there is a video about this that might help you.
    http://laguiadelnetworking.com

  • PS Custom Format Plugin - Issue Reading Files 2GB & 4GB

    Is this issue fixable within our format plugin code, or is it  a photoshop limitation?
    I am new to Photoshop & Photoshop Plugins.  I have reviewed the sdk photoshop documentation & searched web on this subject.
    I am working with a photoshop format plugin written by my predecessor who is no longer here.
    The plugin is modeled after the simpleFormat plugin.
    The plugin is being used on systems running Photoshop CS6 & CC on 64bit Windows 7 with 8GB or more memory.
    The plugin allows a file of our format to be opened, read and written.
    ISSUE:
    The plugin works fine reading  files < 2GB or > 4GB.  For files between 2GB and 4GB, the call to allocate memory fails.
    In the plugin's PIPL structure:   the FormatMaxSize {32767, 32767} and PluginMaxSize {PlugInMaxSize { 2147483647, 2147483647 }
    In the plugin code;  the DoReadStart() method opens the file and reads the file header information.  This works fine.
    Next, in the DoReadContinue() method: SPsBuffer->New(&bufferSize, buffersize) is returning NULL.     see below.
    void PluginMain (const int16 selector,
                                                                             FormatRecordPtr formatParamBlock,
                                                                             intptr_t * data,
                                                                             int16 * result)
        gFormatRecord = reinterpret_cast<FormatRecordPtr>(formatParamBlock);
              gPluginRef = reinterpret_cast<SPPluginRef>(gFormatRecord->plugInRef);
              gResult = result;
              gDataHandle = data;
    sSPBasic = ((FormatRecordPtr)formatParamBlock)->sSPBasic;
    if (gCountResources == NULL ||
                gGetResources == NULL ||
                gAddResource == NULL ||
    gFormatRecord->advanceState == NULL)
    *gResult = errPlugInHostInsufficient;
    return;
    // new for Photoshop 8, big documents, rows and columns are now > 30000 pixels
    if (gFormatRecord->HostSupports32BitCoordinates)
            gFormatRecord->PluginUsing32BitCoordinates = true;
    static void DoReadPrepare()
         gFormatRecord->maxData = 0
    static void DoReadContinue (void)
              int32 done;
              int32 total;
              int32 row;
              VPoint imageSize = GetFormatImageSize();
              /* Set up the buffer & progress variables. */
              done = 0;
              total = imageSize.v;
        Ptr pixelData        = NULL;
        Ptr rawData          = NULL;
        Ptr uncompressedData = NULL;
        int64* offsetTable   = NULL;
    /* allocate the pixel buffer. */
              unsigned32 bufferSize = gFormatRecord->planes * imageSize.v * imageSize.h;
              pixelData = sPSBuffer->New( &bufferSize, bufferSize );            <======   This allocation fails for file sizes > 2GB & < 4GB.
              if (pixelData == NULL)
                        *gResult = memFullErr;
                        //return;
                        if(*gResult == memFullErr) { goto ReadContinueCleanUp; }

    Some examples of files that are successfully read and files that are not successfully read are shown below:
    Filenames that contain "nok" as part of the name, would not open and an out of RAM error occurs.
    in the ReadContinue method, shown in an earlier post on this thread.
    Filenames
    12x12ok
    12x24ok
    ok
    nok
    nok
    nok
    ok
    hdots
    17280
    17280
    23160
    23180
    30001
    32768
    32768
    vdots
    8640
    17280
    23160
    23180
    30001
    32768
    32768
    hdots * vdots
    149299200
    298598400
    536385600
    537312400
    900060001
    1.074E+09
    1.074E+09
    hdots  + vdots
    25920
    34560
    46320
    46360
    60002
    65536
    65536
    hdpi,vdpi
    1440:720
    1440:720
    1440:720
    1440:720
    1440:720
    1440:720
    1440:720
    #channels
    4
    4
    4
    4
    4
    4
    5
    #bpp
    2
    2
    2
    2
    2
    2
    2
    compression
    Packbits
    Packbits
    Packbits
    Packbits
    Packbits
    fileLength(bytes)
    8593776
    8647536
    14365054
    17063936
    21258240
    filesize (MB)
    356
    712
    8.19
    8.24
    13.7
    16.27
    20.27
    filesize (GB)
    0.348
    0.69
    0.008
    0.008
    0.0134
    0.016
    0.0198

  • Error : OraOLEDB (0x80004005) & Active Server Pages error 'ASP 0115'

    I have developed a project and opened recordsets as mentioned below
    With Rs
    .Open "Query",Application("Cn")
    If not (.eof and .bof) then
    .Movefirst
    End If
    End with
    The error 'OraOLEDB' showing at .Open statement. When we refresh page multiple times then Active Server Pages ASP 0115 error occures. Which is get resolved only when I reboot the Web Server or restart the web services.
    OraOLEDB error raises frequently while application running. In between some time it skip the error and show the page perfectly.
    Co-operate me just by suggesting how to resolve this problem.

    Row-00001 occurs when a windows api call to allocate memory failed.
    This can occur due to a memory leak, or memory fragmentation.
    Have you monitored private bytes and virtual bytes?
    There was also an issue in old versions of the provider that caused this, so make sure your oledb provider and oracle client software are up to date.
    Hope it helps,
    Greg

  • How to connect to the internet with ASA 5515 X?

    Hi all:
    I just got my new ASA 5515 X firewall and I got stuck in the first steps.
    I can ping a public IP (8.8.8.8) from the device but I cannot ping it from my LAN.
    I know I am missing either NAT rules or Access rules or maybe both, but I need some help, please.
    Thank you.

    ciscoasa# sho run
    : Saved
    ASA Version 9.1(2)
    hostname ciscoasa
    enable password djMW8L3Na14L7q2L encrypted
    names
    interface GigabitEthernet0/0
     nameif OUTSIDE
     security-level 0
     ip address 10.9.251.2 255.255.255.0
    interface GigabitEthernet0/1
     nameif INSIDE
     security-level 100
     ip address 10.9.250.2 255.255.255.0
    interface GigabitEthernet0/2
     shutdown
     no nameif
     no security-level
     no ip address
    interface GigabitEthernet0/3
    <--- More --->
     shutdown
     no nameif
     no security-level
     no ip address
    interface GigabitEthernet0/4
     shutdown
     no nameif
     no security-level
     no ip address
    interface GigabitEthernet0/5
     shutdown
     no nameif
     no security-level
     no ip address
    interface Management0/0
     management-only
     nameif management
     security-level 100
     ip address 192.168.1.1 255.255.255.0
    ftp mode passive
    <--- More --->
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    object network inside_net
     subnet 10.9.250.0 255.255.255.0
    pager lines 24
    logging asdm informational
    mtu OUTSIDE 1500
    mtu INSIDE 1500
    mtu management 1500
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    icmp permit any INSIDE
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    object network inside_net
     nat (INSIDE,OUTSIDE) dynamic interface
    route OUTSIDE 0.0.0.0 0.0.0.0 10.9.251.1 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    <--- More --->
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 management
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    crypto ipsec security-association pmtu-aging infinite
    crypto ca trustpool policy
    telnet timeout 5
    ssh timeout 5
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    dhcpd address 192.168.1.2-192.168.1.254 management
    dhcpd enable management
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    class-map inspection_default
    <--- More --->
     match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
     parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
     class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny  
      inspect sunrpc
      inspect xdmcp
      inspect sip  
      inspect netbios
      inspect tftp
      inspect ip-options
    <--- More --->
      inspect icmp
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
    : end
    ciscoasa# sho runpacket-tracer input inside icmp 10.9.250.3 0 0 8.8.8.8 detailed
    Phase: 1
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         OUTSIDE
    Phase: 2
    Type: NAT
    Subtype:
    Result: ALLOW
    Config:
    object network inside_net
     nat (INSIDE,OUTSIDE) dynamic interface
    Additional Information:
     Forward Flow based lookup yields rule:
     in  id=0x7fff293db020, priority=6, domain=nat, deny=false
        hits=22235, user_data=0x7fff2a6a3810, cs_id=0x0, flags=0x0, protocol=0
        src ip/id=10.9.250.0, mask=255.255.255.0, port=0, tag=0
        dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0, dscp=0x0
        input_ifc=INSIDE, output_ifc=OUTSIDE
    Phase: 3
    <--- More --->
    Type: NAT
    Subtype: per-session
    Result: ALLOW
    Config:
    Additional Information:
     Forward Flow based lookup yields rule:
     in  id=0x7fff29b804b0, priority=0, domain=nat-per-session, deny=true
        hits=26730, user_data=0x0, cs_id=0x0, reverse, use_real_addr, flags=0x0, protocol=0
        src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0
        dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0, dscp=0x0
        input_ifc=any, output_ifc=any
    Phase: 4
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
     Forward Flow based lookup yields rule:
     in  id=0x7fff2a633a90, priority=0, domain=inspect-ip-options, deny=true
        hits=25709, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
        src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0
        dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0, dscp=0x0
        input_ifc=INSIDE, output_ifc=any
    <--- More --->
    Result:
    input-interface: INSIDE
    input-status: up
    input-line-status: up
    output-interface: OUTSIDE
    output-status: up
    output-line-status: up
    Action: drop
    Drop-reason: (nat-xlate-failed) NAT failed
    ciscoasa#

  • Oracle 11g install failure, error, Failed to allocate port(s)

    I'm having a very hard time reinstalling Oracle 11gR1 x64 bit after the hard drive where I first installed it failed and had to be replaced. The database I'm trying to setup is for personal use on this system only. I'm running Windows XP professional 64 bit edition and have .net framework version 1.1.4322.573 installed.
    During installation the process hangs at the Database Configuration Assistant stage and will not progress till I manually end the lsnrctl.exe process in taskmanager. During the completing database process at the end I get this error -
    SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
    My first thoughts were the ports in question were in use or closed but I've been using both netbios and a port monitor program called currports to check and as far as I can tell the ports listed are open and not in use.
    I did reconfigure the tnsnames.ora and listener.ora files to include valid port addresses (1521) and I can get the lsnrctl.exe to start manually now but still can't connect to the database using an open SQL command prompt.
    I also tried running the emca.bat but still no change. I need help, I'm beating my head against the wall now.
    Here are my etc/hosts, etc/services, and emconfig.log files
    etc/hosts
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    127.0.0.1 localhost
    172.23.153.30     gcihq1

    emconfig.log
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag '-migrate' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateFromDBControl' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateToCentralAgent' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateFromCentralAgent' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateToDBControl' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag '-migrate' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateFromDBControl' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateToCentralAgent' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateFromCentralAgent' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateToDBControl' set to false
    Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: LOG_FILE value: G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: HOST value: gcihq1
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: PORT value: 1521
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SID value: MainDB
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: LISTENER value: LISTENER
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: LISTENER_OH value: G:\MainDB\DBHousing
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag '-config' set to true
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'db' set to true
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: EM_HOME value: G:\MainDB\DBHousing
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: MainDB
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: ORACLE_HOME value: G:\MainDB\DBHousing
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'dbcontrol' set to true
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'UPDATE_EMAIL' set to false
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag '-backup' set to false
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'create' set to false
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig addEMCALogFile
    CONFIG: ORACLE_BASE :G:\MainDB
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file G:\MainDB\cfgtoollogs\emca\emca_2010_03_22_17_48_04.log to G:\MainDB\cfgtoollogs\emca\MainDB\emca_2010_03_22_17_48_04.log
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log.
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
    CONFIG: isCRSInstalled: false
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'CHECK_CONFIG' set to true
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: DBSNMP
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
    CONFIG: No service name available. Will try to set db_unique_name.db_domain
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value:
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: MainDB
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBID.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbid
    CONFIG: No dbid available. Will query db to extract it.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBID value: 1536995688
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYSMAN
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.EMDBPreConfig invoke
    CONFIG: Passed repository configuration check
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
    CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: MainDB
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file G:\MainDB\DBHousing\sysman\config\emd.properties to G:\MainDB\DBHousing\sysman\config\emd.properties.emca.tmp
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file G:\MainDB\DBHousing\sysman\config\emd.properties has been copied to G:\MainDB\DBHousing\sysman\config\emd.properties.emca.tmp
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file G:\MainDB\DBHousing\sysman\config\emoms.properties to G:\MainDB\DBHousing\sysman\config\emoms.properties.emca.tmp
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file G:\MainDB\DBHousing\sysman\config\emoms.properties has been copied to G:\MainDB\DBHousing\sysman\config\emoms.properties.emca.tmp
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file G:\MainDB\DBHousing\sysman\emd\targets.xml to G:\MainDB\DBHousing\sysman\emd\targets.xml.emca.tmp
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file G:\MainDB\DBHousing\sysman\emd\targets.xml has been copied to G:\MainDB\DBHousing\sysman\emd\targets.xml.emca.tmp
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
    CONFIG: isCRSInstalled: false
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing agentHome: null isCentral: false
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing isDBC: false
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing isDBC: false
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter PORTS_FILE.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_MainDB.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_MainDB.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_MainDB.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_MainDB.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Homes to scan for used ports: [G:\MainDB\DBHousing]
    Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME G:\MainDB\DBHousing
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking JMS port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking RMI port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking HTTP port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
    CONFIG: Cannot parse EMD_URL correctly. No port identified
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: null from G:\MainDB\DBHousing\sysman\config\emd.properties
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Cannnot parse EMD_URL correctly. No port identified
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
    CONFIG: Error reading file G:\MainDB\DBHousing\install\staticports.ini
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
    Refer to the log file at G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log for more details.
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
         at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2481)
         at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:744)
         at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:251)
         at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:178)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:221)
         at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
         at java.lang.Thread.run(Thread.java:595)
    Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
    ------------------------------------------------------------------------------------------------------------------------------

  • Partition Failed Partition failed with the error: POSIX reports: The operation couldn't be completed. CAN NOT ALLOCATE MEMORY

    I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
    I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
    https://discussions.apple.com/message/13288923#13288923
    but it fail to partition with the msg:
    Partition Failed
         Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
    pls pls pls help urgentely on this matter I stop working.
    Kind Regards,
    pe

    Hi again OGELTHORPE.
    I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
    It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
    It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
    Thanks again for your suggestions!
    L.

  • Failed to allocate port(s) in the specified range(s) for the following....

    Hi,
    I'm attempting to install oracle 10.2.0 on Solaris 10.
    When I create a database i get the error:
    Failed to allocate port(s) in the specified range(s) for the following process(es): .....
    So I look at the logs and there looks like to be some configuration issues but i'm not sure where to start.
    I've changed the port from NULL to 1521 in listener.ora.
    It worried me that it was set to null.
    Ive tried running emca -config -all db ( not sure what central agent home should be set it as /app/oracle/product/10.2.0/Db_1 seemed to accept that)
    This gives me the same above error.
    Any help is greatly appreciated. Please note im both a novice solaris and oracle user
    Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log.
    Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'CHECK_CONFIG' set to true
    Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
    Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: DBSNMP
    Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
    CONFIG: No service name available. Will try to set db_unique_name.db_domain
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value:
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: test2
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: test2
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: test2
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBID.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbid
    CONFIG: No dbid available. Will query db to extract it.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBID value: 691205234
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYSMAN
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.EMDBPreConfig invoke
    CONFIG: Passed repository configuration check
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
    CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: test2
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emd.prop
    erties.emca.tmp
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties has been copied to /app/oracle/product/10.2.0/Db_1/s
    ysman/config/emd.properties.emca.tmp
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.
    properties.emca.tmp
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties has been copied to /app/oracle/product/10.2.0/Db_1
    /sysman/config/emoms.properties.emca.tmp
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml to /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml.emca.
    tmp
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml has been copied to /app/oracle/product/10.2.0/Db_1/sysman/
    emd/targets.xml.emca.tmp
    Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 agentHome: null isCentral: false
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter PORTS_FILE.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_test2.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_test2.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_test2.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_test2.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to /app/oracle/product/10.2.0/Db_1/oui
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Homes to scan for used ports: [app/oracle/product/10.2.0/Db_1]
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /app/oracle/product/10.2.0/Db_1
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking JMS port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking RMI port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking HTTP port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager getAgentPort
    CONFIG: Cannot parse EMD_URL correctly. No port identified
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: null from /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Cannnot parse EMD_URL correctly. No port identified
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.FileUtil getProperties
    CONFIG: Error reading file /app/oracle/product/10.2.0/Db_1/install/staticports.ini
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Contro
    l [5500-5519],EM Agent [3938] | [1830-1849]
    Refer to the log file at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log for more details.
    Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [55
    40-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
    at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2266)
    at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
    at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
    at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
    at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
    at java.lang.Thread.run(Thread.java:534)
    Also got thie error in another log
    Cluster Error Message: PRKH-1010 : Unable to communicate with CRS Services

    thanks mathias,
    but i have already done, netstat -na |grep portnumber
    but nothing no port in range are set
    thanks howevar
    regards

  • ORA-13193: failed to allocate space for geometry

    I am having problems indexing a point layer using Locator in 8.1.6. The errors are:
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13200: internal error [ROWID:AAAFs9AADAAAB30AAg] in spatial indexing.
    ORA-13206: internal error [] while creating the spatial index
    ORA-13193: failed to allocate space for geometry
    ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 7
    ORA-06512: at line 1
    ORA-06512: at "MDSYS.GEOCODER_HTTP", line 168
    ORA-06512: at line 1
    The table has 2 columns:
    POSTCODE VARCHAR2(9)
    LOCATION MDSYS.SDO_GEOMETRY
    I loaded the point data with sqlloader rather than geocoding, so this could be the root of my problem, maybe I've missed something obvious:
    POSTCODE
    LOCATION(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDINATES)
    AB15 8SA
    SDO_GEOMETRY(1, NULL, SDO_POINT_TYPE(3858, 8075, NULL), NULL, NULL)
    AB15 8SB
    SDO_GEOMETRY(1, NULL, SDO_POINT_TYPE(3864, 8077, NULL), NULL, NULL)
    AB15 8SD
    SDO_GEOMETRY(1, NULL, SDO_POINT_TYPE(3867, 8083, NULL), NULL, NULL)
    I am trying to index using the following command, this is when I got the error:
    SQL> execute geocoder_http.setup_locator_index('POSTCODE_POINTS', 'LOCATION');
    User_sdo_geom_metadata has some metadata inserted with lat/long dimensions. My data is not in lat/long, so I updated this but still get the same error message.
    Is it possible to use locator with data that's not in lat/long format?
    Anyone got any ideas?
    Thanks.

    1) If Locator needs lat/long coordinates, can anyone suggest a good route to convert coordinates for example from British National Grid to lat/long?
    2) Are there plans for Locator to be able to use data from other coordinate systems like Spatial can?

  • Failed to allocate native stream - Leopard 10.5.4

    I've got this little class which runs off the EDT that plays sounds:
    private class PlayThread implements ThrowableVoidAction {           
              public void act( Object o ){
                   byte tempBuffer[] = new byte[512];
                  try{
                       AudioInputStream     ain           = AudioSystem.getAudioInputStream( Notify.class.getResourceAsStream( (String)o ) );
                       AudioFormat               audioFormat = ain.getFormat();
                       DataLine.Info          info           = new DataLine.Info( SourceDataLine.class, audioFormat );
                       SourceDataLine          sDataLine      =(SourceDataLine)AudioSystem.getLine( info );
                        sDataLine.open(audioFormat);
                        sDataLine.start();
                        int cnt;
                        while( (cnt = ain.read( tempBuffer, 0, tempBuffer.length )) != -1 )
                             if(cnt > 0)
                                  sDataLine.write( tempBuffer, 0, cnt );
                        sDataLine.drain();
                        sDataLine.close();
                  catch (Exception e) {
                       System.err.println( "[Notify|PlayThread] act : " + e.getMessage() );
         }Works great in Linux/Windows XP/Vista, however, on the Apple 10.5.2+ JAva 1.6 build, it unfortunately spits out a "Failed to allocate native stream" in the catch block. Anyone have any ideas as to what the problem might be? Just a bad Apple JRE?
    Thanks in advance!
    Alex

    In addition, a clip as follows fails as well:
    import java.io.FileInputStream;
    import sun.audio.AudioPlayer;
    import sun.audio.AudioStream;
    public class Test {
         String fileName;
         private Test( String s ){
              fileName = s;
         private void play(){
              try{
                   System.out.println( "About to play stream" );
                   AudioStream as = new AudioStream( new FileInputStream( fileName ) );
                   AudioPlayer.player.start( as );
                   System.out.println( "Stream executed" );
              catch( Exception x ){
                   x.printStackTrace();
         public static void main( String [] args ){
              Test t = new Test( "sounds/msg.wav" );
              t.play();
    }It outputs the final "Stream executed", but no sound is ever played..

  • " Server Error [2009]: Failed to allocate resources for results data" IR Error

    Hi,
    We recently moved form 9.3.3. to 11.1.2.3 and we run only IR and SQR reports. When we run few IR reports we get the below error.
    "Script(x):uncaught exception:  Server Error [2009]: Failed to allocate resources for results data."
    Any thought on what could be the cause. I changed the DSA setting, HTTP config settings for timeouts. I followed a oracle Knowledge base document to make sure I'm setting the right parameters still it doesn't work.
    Any advise will be appreciated.
    Thank you.

    Hi,
    Can you please try to increase the timeout settings for workspace and check the issue.
    You can refer following KM article for more information :
    Hyperion Interactive Reporting (IR) When Processing a BQY in Web Client and iHTML Error: "Server Error [2009] Failed To Allocate Resources To Results Data" [ID 1089121.1]
    To try in 11.1.2.x check these settings in workspace :
    Please go to Navigate -> Administer -> Reporting and Analysis -> Web Applications -> Right click on RA_FRAMEWORK_LWA and select Properties. A
    Window pops up. In that, go to Applications tab and then go to Data Access Servlet. There are two values there
    i) Hyperion Intelligence Client Polling Time(seconds) => Set this to zero
    ii) DAS Response Timeout => Set this to 3600
    Restart the R&A services and WebApp after this change.
    Hope this information helps.
    regards,
    Harish.

  • Failed to allocate memory

    hi everybody
    im retrieving all the assets in the system in an internal table and convert it to csv format using the fm SAP_CONVERT_TO_CSV_FORMAT, there are abt 50000 records
    when executing the program, im getting an error ' Fails to allocate memory' and the prg is stopped
    is there a way i can stop that?

    hi
    you can use this FM for the download as a CVS format.
    DATA: m_c_file        TYPE string.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = C:\DATA\test.CSV   
          filetype                = 'ASC'
    *      write_field_separator   = 'X'
        TABLES
          data_tab                = itab
        EXCEPTIONS
          file_write_error        = 1
          no_batch                = 2
          gui_refuse_filetransfer = 3
          invalid_type            = 4
          no_authority            = 5
          unknown_error           = 6
          header_not_allowed      = 7
          separator_not_allowed   = 8
          filesize_not_allowed    = 9
          header_too_long         = 10
          dp_error_create         = 11
          dp_error_send           = 12
          dp_error_write          = 13
          unknown_dp_error        = 14
          access_denied           = 15
          dp_out_of_memory        = 16
          disk_full               = 17
          dp_timeout              = 18
          file_not_found          = 19
          dataprovider_exception  = 20
          control_flush_error     = 21
          OTHERS                  = 22.

Maybe you are looking for

  • AEBS "Connecting to ISP..."

    I have an AEBS (rev 5.5.1) that connects to an ISP via dial-up (there is no broadband where I live). One Airport client computer (iBook G4). I have two issues with the AEBS: 1) About every 10th connection attempt, it gets into a "Connecting to ISP...

  • User groups in ABAP Queries

    Hi Friends, My doubt is regarding ABAP Queries. when we create user groups , in which table and field does the data holds, which will be useful in retrieving the data. Please help me ASAP, as this would get break through in solving severity 2 ticket.

  • Controlling Cursor/Scroll Bar

    Hi All, I have a long interactive report which is stretched to many pages, now when I click on any of the lines in any page it gives me more data below that line as in hierarchy. I have the problem when I click on any such line which is not displayed

  • HT1918 why am i not getng an email to verify my account

    i am trying to set up a new account but i am not getting an e-mail to start up and verify my acc. pleae help

  • EPMA Deploy - Additions and Delete for same member on Compare

    We migrated our Account dimension from another environment, but it didn't have some members we had in the source environment, so on the Compare from EPMA, it was showing some members were going to be Deleted. So we imported back our original Account