LU04 qty should be confirmed in background..

Dear Experts,
While doing GRN wrt PO and receiving in Quality stock. TO confirmed in Interim bin and stock updated in Interim only.
After that, Through LT01, partial stock moved to Bin. Now in QA32, batch released and stock posted to both Unrestricted & Blocked stock.
In LU04, Open quantity appearing for both stock types (Blocked & Unrestricted). Manual TO confirmation done from existing bins.
If stock type is only one for the batch, Auto TO confirmation happening and no open qty in LU04.
But,
Is there any possibility of doing Auto TO confirmation for LU04 in background if single batch existing in multiple bins..??

Hello Govind,
For Non-Quality Parts, Configuring direct to 001 is fine.
For Quality Parts, The Transfer Orders will be created twice. i.e.,
1st, PO-GR-TR-TO(TO should be going to Quality Area which is like 921 or you can define new storage type like QCA)
During this first TO creation, your Search Strategy should influence with Stock Category 'Q' and divert to 921 or QCA Location ( for these storage Types, Maintain Stock Placement Strategy as 'L' OR 'Q' ).
After placing the stock here, Quality should take usage Decision using QA32. then against the posting change 2nd TO will be created to move the stock to actual destination. Here, your pick should again incfluence with Stock Category 'Q' to pick from 921 or QCA Location.
Then, your exepcted scenario automatically works even you have the stock in multiple bins.
Regards,
Sathish

Similar Messages

Delivery block at item level in sales order,Qty should not be confirmed

Dear all
We have a below requirment
We will have multiple line items in sales order and put delivery block at item level.If delivery block is put at item level it should not confirm the qty and pass on to MRP
But if we put at header level delivery block,schedule line qty at item level are not getting confirmed.So requirements are not passed to MRP-This is correct .Working as per SAP standard configuration.
Can you tell how to activate the same for item level delivery block.if same delivery block is put at item level,it is confirming the quantity.But we don't want confirmation of qty to happen.
Can you give us solution
Regards
Sudha

We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
Check the customizing OVZ8: if the flag Transfer of Requirement
Transfer of requirements of the requirement class should be ON.
In the sales order the requirement type is determined by the combination sales order item + MRP type.
Refer SAP Help URL below
[Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

Order qty and total confirmed qty in PI sheets

Dear Experts,
Kindly suggest the possibility of appearing total order qty and already confirmed qty in the PI sheet, system useually provides the same while performing confirmation through co11n or cor6.
Thanks in advance for your help..
Regards,
Nitish

Hi Srini,
The following details are available in the table AFVV,
Standard value, operation qty & Base qty.
With this values create a formula Standard value * operation qty/ Base qty , this will equal to the planned hours for that particular activity type. Similarlt planned hours for other activities can be calculated.
The actual/confirmed hours are available in the table AFRU.
Regards,
Senthilkumar

GRPO Qty should not exceed +/- 10% of Purchase Order

Hi All ,
Need Store procedure for GRPO QTY should not deviates +/-10% of the Puchase Order Qty.
Ashish Gupte

hI Ashish,
You can use OPOR , POR1 , OPDN AND PDN1 TABLES AND LINK THEM WITH
DOCENTRY , BASEREF , AND LINENUM FIELDS WITH THE CONDITION OF QTY DEVIATION.
Let me know if this works.
Thanks
Malhaar

PO Qty should not be more than PR Qty

Hi All,
I am creating a PO from PR.
I want that the PO qty should never be more than PR qty, and if so it should give an error.
Can anyone tell me the BADI or exit for this? I have already seen exits for PO and PR, but I am not able to figure out which exit to use.
Thanks in advance.
Vinod.

Hello,
You can use the function exit EXIT_SAPMM06E_012 to carry out this validation.
Thanks,
Venu

PO Qty should not Amended after GR

Hi friends
i have to do PO Qty should not Amended after GR finished . IS there any BADI Enhancements points please let me know i guess
this is BADI ME_PO_PRICING_CUST i have tried it but it is not working for me or i missing some thing .please give suggestions what i need to do .And the same time there is also required for particular user it should be allow to change
REgards
Rk

Hi when GR is done and it is allowing to change it comes under PO amendment
ask functional if amendment can be stopped
regards
m.a

I want to raise Credit note but Qty should not be reversed

Hi All,
i am raise A/R invoice qty 10 total amount 10,000, i want to raise a A/R Credit note for the same invoice but only deduct amount 1000 where the qty should not be reversed.
Thanks & regards,
Mobin

Mobin,
Instead of copying the invoice to a credit note, you can create a service type credit note in itself so you don't need to choose any items, just the amount.
Regards,
Nat

Po quantity and Component qty should be same Whildoing Subcontracting PO.

Hello friends
I need to do the following setting.
While doing Subcontracting Purchase Order the Ordered Quantity entered is to be reflect Component Quantity. ( Without entering component qty, automatically ordered qty should come in component qty). The reason is that user should not commit any mistake while doing po.
Where can i control this. Is there any customization setting or Material Master setting.
Please give me suggesition. Urgent.
Thanks and Regards
Sitaram

Hi Sitaram,
As you have maintained the BOM for that material/Plant.
The finished material and components are maintained with the quantities,
When you creating the Subcontracting PO you enter the Material number in the item level
in the material data tab you have 2 options Components and Explode BOM,
If you click the Components the system will ask you to enter the components and their quantity.
If you click the Explode BOM system will pick the components and their quantity from the BOM which is already maintained for that finishing material.
So no need to maintain the quantity manually by Users, if you use explode BOM options.
rgds
Chidanand

WS Error - Planned Qty should be greater than Completed + Rejected Qty

Hi All,
We've tried to close a Production Order using the ProductionOrdersService Web Service. We're doing this by setting the Production Order Status flag to closed (boposClosed). The call also requires us to re-set the due date so we do that to the same value.
When we perform the call we receive the following exception:
"Planned Qty should be greater than Completed + Rejected Qty [OWOR.PlannedQty]"
It's interesting to note that we've tried to close the production order with different items and everything seems to point towards an issue with the items, however, we're not really sure what is triggering the error. We're also not sure what the error really implies as the Planned Qty is greater than the Completed + the Rejected Qty on the database.
We're working with SAP 8.8.1.
The code is as follows:
        // Get the current session ID first
        // Create message header object with value..
        SAPProductionOrdersService::MsgHeader^ localMsgHeader = gcnew SAPProductionOrdersService::MsgHeader();
        localMsgHeader->SessionID = sessionId;
        localMsgHeader->ServiceName = SAPProductionOrdersService::MsgHeaderServiceName::ProductionOrdersService;
        localMsgHeader->ServiceNameSpecified = true;
        SAPProductionOrdersService::ProductionOrdersService ^iprodWs = gcnew SAPProductionOrdersService::ProductionOrdersService();
        iprodWs->MsgHeaderValue = localMsgHeader;
        // Set the item params object
        SAPProductionOrdersService::ProductionOrderParams^ localProductionOrderParams = gcnew SAPProductionOrdersService::ProductionOrderParams();
        localProductionOrderParams->AbsoluteEntry = ProductionOrderNum;
        localProductionOrderParams->AbsoluteEntrySpecified = true;
        // Perform the Item fetch with that information
        SAPProductionOrdersService::ProductionOrder^ localProductionOrder = iprodWs->GetByParams(localProductionOrderParams);
        // Construct a new Production Order Data structure
        SAPProductionOrdersService::ProductionOrder^ newProd = gcnew SAPProductionOrdersService::ProductionOrder();
        // Absolute Entry
        newProd->AbsoluteEntry = ProductionOrderNum;
        newProd->AbsoluteEntrySpecified = true;
        // Production Order Status
        newProd->ProductionOrderStatus = SAPProductionOrdersService::ProductionOrderProductionOrderStatus::boposClosed;
        newProd->ProductionOrderStatusSpecified = true;
        newProd->DueDate = localProductionOrder->DueDate;//     {6/9/2011 0:0:0 System.DateTime}     System::DateTime
        newProd->DueDateSpecified     = localProductionOrder->DueDateSpecified;//     bool
        // Setting lines array back
        newProd->ProductionOrderLines = localProductionOrder->ProductionOrderLines;
        // Item Code
        newProd->ItemNo = ItemNum;
        // Perform the Update of the Production Order with that information
        iprodWs->Update(newProd);
        // Since there is no return type telling us of the recent update, unless we get an exception, assume it worked
        String^ recMsg = "Close Production Order Attempt Successful. Parameters are: \r\n" +
                         "Production Order Num: " + ProductionOrderNum;
        Log::LogInformation(recMsg);
        retVal = true;
Hector

Dear Gordon,
Yes, I have checked the data in the database. I've checked tables OWOR fields PlannedQty, CompletedQty and RjctQty and everything seems to be in order. I also checked table WOR1 for the production order lines. There are two lines, one Labor and one Raw Material (regular item). I've checked BaseQty, PlannedQty and IssuedQty but everything seems in order there as well.
Do you know if there is a way to find out what internal piece of code throws that exception message?
Hector

CORUPROC (Process chain for confirmation, collective background processing)

Hello Guru,
Can you please explain me the program CORUPROC (Process chain for confirmation, collective background processing) that can be use in SE38. and how it its important for CO16N (Reprocessing Incorrect Production Order)?
CORUPROC is also the same as CO1P transaction code.
Please explain the use of this program.
Thanks
Edited by: Ryan on Feb 3, 2009 7:55 AM

Hi Carina,
It might take some time for the attribute change run.
what you can do is right click on th running process , go to display messages and check if every thing is fine.
also goto batch monitor from there and see if the job is still running.
alternatively, if you are not sure if the job got strucked up, kill the job from batch monitor and run the attribute change run manually.
you got two options two do now.
1)Wait for some time for the process to complete and check the messages.
2)kill the job and run att change run manually.
i suggest you to go for option 1 and if it is taking too long ar there is any error message, analyze and then go for option 2
hope this helps.
cheers,
Srinath.
Edited by: Srinath Singamsetti on Aug 4, 2009 5:44 AM

PO qty Should not increase PR Qty

Hi
Here the requirement is,
PO qty Should not increase PR Qty
If buyer change / increase the PO qty then the system should give error msg.
It should not allow.
How to do this?
Vijay

Hi,
Make following message as Error in +SPRO > MM > Purchasing > Environment Data > Define Attributes of System Messages > System messages
06 589 Materials/services of purchase requisition & & already ordered in full

GR Qty greater than Confirmed Qty

Hi All,
We have created Purchase order with Internal order as account assignment. When ever we are doing MIGO, System is giving the error " GR Qty greater than Confirmed Qty".
Please help.
Thanks
Subrato

>
Subrato Chowdhury wrote:
> The MIGO is happening whenever we are deattaching the internal order. The PO Quantity is same MIGO Quantity.
Can you expalin more this line whenever we are deattaching the internal order ?

GRN Qty should be less than Sub contracting Challan Qty

Hi Friends,
When we put Sub Contract Challn at the time of receving Sub Contract material MIGO, system should pick up challn Quty, or System should accept less qty than Challan Qty.
Can we do the same ?
Please help me.
Thanks in Advance
Yogesh

HI,
Yes GRN Qty should be same or less than Sub contracting Challan Qty, system will allow you do the reconcilation with J1ifq or if the challan qty less then GRN quantity at the time system wont allow you to do the reconcilation
Regards
Pramod

Delivery qty should not exceede Sales order qty

Dera Friends,
System is allowing to create delivery for a higher quantity than in sales order. For eg. The sales order is created for 10 pieces and delivery is created for 20 pieces.
We want to have a check on this. Pls guide where we can configure this. Our requiremnt is that Delivery qty should not exceede the sales order qty.
points assured
Krishna>C

hi,
Go to VTLA, select your order type and delivery type and select item category and see whether you have maintained the following:-
Order requirements:::::101
Item Data:::::::::::::::::::101
Updata Document flow:::X
Pos./neg.quantity::::::::::+

Using Namoroka x64 some pages that should have a white background are red

I'm using the beta version of Namoroka x64 and some pages that should have a white background, have a red background. The 32 firefox does not have this issue with the same page.
Example site: http://www.illinoislottery.com/subsections/History/Win2011.txt
Trying a txt file on the hard disk gives the same result

Opening in the side bar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Organize Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the side bar" is not selected.

LU04 qty should be confirmed in background..

Similar Messages

Maybe you are looking for