Lucreate "failure" - error copy files from zone root

I am using Live Upgrade to take a Solaris 10 8/07 server to Solaris 10 10/08. All the pre-req patches have been applied. When running lucreate, I get some grief about failing to copy some files. Otherwise lucreate seems to work fine.
Copying.
Creating shared file system mount points.
Copying root of zone <dmgrdv01>.
Copying root of zone <wasdv01>.
Copying root of zone <webdv01>.
Copying root of zone <waspl01>.
Copying root of zone <dmgrpl01>.
Copying root of zone <webpl01>.
Copying root of zone <tst01>.
Copying root of zone <tst02>.
Copying root of zone <tst03>.
Copying root of zone <sjsdv01>.
ERROR: Zone <sjsdv01> in BE <sol10_807>: cannot copy root
        See </tmp/.lucopy.cpio_err.28752.sjsdv01> for details.
Copying root of zone <empdev01>.
.sjsdv01 is a whole root zone hosting an installation of the Sun Java System Directory Server and Application Server. Here is the error log file:
# cat /tmp/.lucopy.cpio_err.28752.sjsdv01
cpio: Cannot open "./root/var/opt/mps/serverroot/admin-serv/tmp/iwswatchdog.3837", skipped, errno 122, Operation not supported on transport endpoint
cpio: Cannot open "./root/var/opt/mps/serverroot/admin-serv/tmp/iwswatchdog.15973", skipped, errno 122, Operation not supported on transport endpoint
cpio: Cannot open "./root/var/opt/mps/serverroot/admin-serv/tmp/iwsadmin.3838", skipped, errno 122, Operation not supported on transport endpoint
cpio: Cannot open "./root/var/opt/mps/serverroot/admin-serv/tmp/iwsadmin.15974", skipped, errno 122, Operation not supported on transport endpoint
12835872 blocks
4 error(s)
#Am I correct in assuming that this means the zone was successfully copied except these four files?
Thanks,
Mark

The files are pure plain text ?Yes, although I have also tried with various other files which were around - MS Word, PDF.
Do all files fail or just specific files...As far as I can see, all files of the right size.
I am aware of one other outstanding Windows specific
bug, 3703236, which leads to file size truncation.
I've only seen this with Binary documents such as
PDF, ZIP, JPEG, and it is typically only seen with
files over 1MB in size, and typically results in
files that are between 100K and 300K remaining.
Are you running this test on with the database
running on Windows ?, is so what is the server
platform ?.Server 2000, and XP Pro.
What is the size of the file(s) you are
uploading, and what size are they after the upload ?Everything from 1k to 1m, going up in powers of 2. The latest test, with 9.2.0.7 and an updated Windows MSDAIPP.DLL files start to fail at 64K. The failed transferred files are usually around 40K, but the size varies.
>
Do you have proxy servers etc configured in your
Internet Explorer ? Can you disable them and try
again...
Yes. No difference.
Can you open a tar with Oracle Support, upload the
document(s) that are failing, and post the tar number
here.
Tar is 5004416.993
See also
Excel output truncated (255 chars only) - Workaround?
44573&tstart=50

Similar Messages

  • Error copying files from flash drive

    I'm not entirely sure this is a Windows compatibility problem, but it seems plausible. We have an external USB drive that is used to carry files back and forth between home, where we have a MacBook, and my husband's job, where he has a Windows machine. He has had a problem on several occasions copying files between the external drive and the hard drive. If he copies an entire folder, the copy will sometimes throw an error and then abort the copy process. This then results in anything that previously existed in the target folder and didn't get copied being completely wiped out (instead of them just being left there).
    I was able to replicate this behavior for the local copy of the files that are now on our hard drive, just trying to copy to another folder on the hard drive. The error message I saw was a "File in Use" error on a file that was definitely not open in any application, and then the aborted copy process (and the complete erasure of any files that previously were there). It was intermittent: I had a successful copy-and-paste of the folder once, and another that displayed the error behavior.
    Other info:
    I can copy using "cp -r" on the command line, this only happens with the Finder.
    The file that I saw the "File in Use" error on has an extended attribute set (I noticed this due to the "@" sign at the end of the permissions). When I look at it, it is a com.apple.FinderInfo attribute but I don't know what the values/fields mean.
    The files all show the username & group name from the Windows system my husband uses at work (we haven't set any groups at home -- the files show "staff" as the group so I presume this is from the Windows system).
    Some of the files were originally created on the Windows machine, others originally on the Mac machine.
    The external hard drive is formatted as MS-DOS (FAT32).
    I'm thinking there is some permissions issue between the Mac attributes and the Windows attributes that is causing the copy to fail (ungracefully) but that's a theory and I don't know how to fix it. Thanks for the help.

    I never did figure out why the files wouldn't copy over. Eventually, I deleted them and reformatted the drive. I don't know if that "fixed" anything, and I have not tried to copy such large files from the Mac to drive or vice-versa, but the drive seems to be fine. So, the problem and the solution remain a mystery!

  • CPU Jul-09 Installation - Error Cannot copy file from 'libjox10.so' to

    Hi All, I received this error while I was installing the last CPU on a 10.2.0.4 Oracle Instance running on a HP-UX Itanium System:
    Patch 8568398:
    Copy Action: Desctination File "/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writeable.
    'oracle.rdbms, 10.2.0.4.0': Cannot copy file from 'libjox10.so' to '/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'
    I checked metalink' site with no similar results found.
    Could anybody help me?
    Should I run /usr/sbin/slibclean and remove the last patch (Patch 8568398) and then try again?
    This is the complete log...
    $ opatch version
    Invoking OPatch 10.2.0.4.7
    OPatch Version: 10.2.0.4.7
    OPatch succeeded.
    $ sqlplus /nolog
    SQL*Plus: Release 10.2.0.4.0 - Production on Fri Jul 17 16:29:29 2009
    Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    SQL> conn / as sysdba
    Connected.
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    $ lsnrctl stop
    LSNRCTL for HPUX: Version 10.2.0.4.0 - Production on 17-JUL-2009 16:32:29
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=Hostname)(PORT=1521)))
    The command completed successfully
    $ emctl stop dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    http://hostname:1158/em/console/aboutApplication
    Stopping Oracle Enterprise Manager 10g Database Control ...
    ... Stopped.
    $unzip p8534387_10204_HPUX-IA64.zip
    <...>
    $ cd 8534387
    $ opatch napply -skip_subset -skip_duplicate
    Invoking OPatch 10.2.0.4.7
    Oracle Interim Patch Installer version 10.2.0.4.7
    Copyright (c) 2009, Oracle Corporation. All rights reserved.
    UTIL session
    Oracle Home : /u02/app/oracle/product/10.2/Db_1
    Central Inventory : /u02/app/oracle/oraInventory
    from : /var/opt/oracle/oraInst.loc
    OPatch version : 10.2.0.4.7
    OUI version : 10.2.0.4.0
    OUI location : /u02/app/oracle/product/10.2/Db_1/oui
    Log file location : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2 009-07-17_16-38-05PM.log
    Patch history file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_ history.txt
    Invoking utility "napply"
    Checking conflict among patches...
    Checking if Oracle Home has components required by patches...
    Checking skip_duplicate
    Checking skip_subset
    Checking conflicts against Oracle Home...
    OPatch continues with these patches: 7155248 7155249 7155250 7155251 7155252 7155253 7155254 7197583 7375611 7375613 7375617 7609057 7609058 8309587 8309592 8309623 8309632 8309637 8309642 8534387 8568395 8568397 8568398 8568402 8568404 8568405
    Do you want to proceed? y
    y
    User Responded with: Y
    Running prerequisite checks...
    Prerequisite check "CheckApplicable" failed.
    The details are:
    Patch 8568398:
    Copy Action: Desctination File "/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writeable.
    'oracle.rdbms, 10.2.0.4.0': Cannot copy file from 'libjox10.so' to '/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'
    UtilSession failed: Prerequisite check "CheckApplicable" failed.
    $ opatch lsinventory -detail
    Invoking OPatch 10.2.0.4.7
    Oracle Interim Patch Installer version 10.2.0.4.7
    Copyright (c) 2009, Oracle Corporation. All rights reserved.
    Oracle Home : /u02/app/oracle/product/10.2/Db_1
    Central Inventory : /u02/app/oracle/oraInventory
    from : /var/opt/oracle/oraInst.loc
    OPatch version : 10.2.0.4.7
    OUI version : 10.2.0.4.0
    OUI location : /u02/app/oracle/product/10.2/Db_1/oui
    Log file location : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log
    Patch history file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt
    Lsinventory Output file location : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/lsinv/lsinventory2009-07-17_17-53-30PM.txt
    Installed Top-level Products (2):
    Oracle Database 10g 10.2.0.1.0
    Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
    There are 2 products installed in this Oracle Home.
    Installed Products (190):
    Agent Required Support Files 10.2.0.1.0
    Agent Required Support Files Patch 10.2.0.4.0
    Assistant Common Files 10.2.0.1.0
    Assistant Common Files Patch 10.2.0.4.0
    Bali Share 1.1.18.0.0
    Buildtools Common Files 10.2.0.1.0
    Character Set Migration Utility 10.2.0.1.0
    Character Set Migration Utility Patch 10.2.0.4.0
    Database Configuration and Upgrade Assistants 10.2.0.1.0
    Database Configuration and Upgrade Assistants Patch 10.2.0.4.0
    Database SQL Scripts 10.2.0.1.0
    Database SQL Scripts Patch 10.2.0.4.0
    Database Workspace Manager 10.2.0.1.0
    Database Workspace Manager 10.2.0.4.0
    DBJAVA Required Support Files 10.2.0.1.0
    DBJAVA Required Support Files Patch 10.2.0.4.0
    Enterprise Edition Options 10.2.0.1.0
    Enterprise Manager Agent Core 10.2.0.1.0
    Enterprise Manager Agent Core Patch 10.2.0.4.0a
    Enterprise Manager Agent DB 10.2.0.1.0
    Enterprise Manager Agent DB 10.2.0.4.0
    Enterprise Manager Baseline 10.2.0.1.0
    Enterprise Manager Baseline 10.2.0.4.0
    Enterprise Manager Common Core Patch 10.2.0.4.0a
    Enterprise Manager Common Files 10.2.0.1.0
    Enterprise Manager Minimal Integration 10.2.0.1.0
    Enterprise Manager plugin Common Files 10.2.0.1.0
    Enterprise Manager plugin Common Files 10.2.0.1.0
    Enterprise Manager plugin Common Files Patch 10.2.0.4.0
    Enterprise Manager Repository Core 10.2.0.1.0
    Enterprise Manager Repository Core patch 10.2.0.4.0a
    Enterprise Manager Repository DB 10.2.0.1.0
    Enterprise Manager Repository DB 10.2.0.4.0
    Generic Connectivity Common Files 10.2.0.1.0
    Generic Connectivity Common Files Patch 10.2.0.4.0
    HAS Common Files 10.2.0.1.0
    HAS Common Files Patch 10.2.0.4.0
    HAS Files for DB 10.2.0.1.0
    HAS Files for DB Patch 10.2.0.4.0
    Installation Common Files 10.2.0.1.0
    Installation Common Files Patch 10.2.0.4.0
    Installer SDK Component 10.2.0.4.0
    iSQL*Plus 10.2.0.1.0
    iSQL*Plus 10.2.0.4.0
    Java Runtime Environment 1.4.2.14.0
    JDBC Common Files 10.2.0.1.0
    JDBC Common Files 10.2.0.4.0
    LDAP Required Support Files 10.2.0.1.0
    LDAP Required Support Files Patch 10.2.0.4.0
    OLAP SQL Scripts 10.2.0.1.0
    OLAP SQL Scripts Patch 10.2.0.4.0
    Oracle Advanced Security 10.2.0.1.0
    Oracle Advanced Security Patch 10.2.0.4.0
    Oracle Call Interface (OCI) 10.2.0.1.0
    Oracle Call Interface (OCI) Patch 10.2.0.4.0
    Oracle Clusterware RDBMS Files 10.2.0.1.0
    Oracle Clusterware RDBMS Files Patch 10.2.0.4.0
    Oracle Code Editor 1.2.1.0.0I
    Oracle Configuration Manager 10.2.7.1.0
    Oracle Containers for Java 10.2.0.1.0
    Oracle Containers for Java 10.2.0.4.0
    Oracle Core Required Support Files 10.2.0.1.0
    Oracle Core Required Support Files Patch 10.2.0.4.0
    Oracle Data Mining RDBMS Files 10.2.0.1.0
    Oracle Data Mining RDBMS Files Patch 10.2.0.4.0
    Oracle Database 10g 10.2.0.1.0
    Oracle Database 10g 10.2.0.1.0
    Oracle Database 10G 32 bit 10.1.0.2.0
    Oracle Database 10g interMedia Files 10.2.0.1.0
    Oracle Database 10g interMedia Files Patch 10.2.0.4.0
    Oracle Database 10g Patch 10.2.0.4.0
    Oracle Database 10g Patch 10.2.0.4.0
    Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
    Oracle Database User Interface 2.2.13.0.0
    Oracle Database Utilities 10.2.0.1.0
    Oracle Database Utilities Patch 10.2.0.4.0
    Oracle Display Fonts 9.0.2.0.0
    Oracle Enterprise Manager Console DB 10.2.0.1.0
    Oracle Enterprise Manager Console DB 10.2.0.4.0
    Oracle Extended Windowing Toolkit 3.4.38.0.0
    Oracle Globalization Support 10.2.0.1.0
    Oracle Globalization Support Patch 10.2.0.4.0
    Oracle Help For Java 4.2.6.1.0
    Oracle Help for the Web 1.1.10.0.0
    Oracle Ice Browser 5.2.3.6.0
    Oracle interMedia 10.2.0.1.0
    Oracle interMedia Annotator 10.2.0.1.0
    Oracle interMedia Client Option 10.2.0.1.0
    Oracle interMedia Client Option Patch 10.2.0.4.0
    Oracle interMedia Java Advanced Imaging 10.2.0.1.0
    Oracle interMedia Java Advanced Imaging Patch 10.2.0.4.0
    Oracle interMedia Locator 10.2.0.1.0
    Oracle interMedia Locator Patch 10.2.0.4.0
    Oracle interMedia Locator RDBMS Files 10.2.0.1.0
    Oracle interMedia Locator RDBMS Files Patch 10.2.0.4.0
    Oracle interMedia Patch 10.2.0.4.0
    Oracle Internet Directory Client 10.2.0.1.0
    Oracle Internet Directory Client Patch 10.2.0.4.0
    Oracle Java Client 10.2.0.1.0
    Oracle Java Client Patch 10.2.0.4.0
    Oracle JDBC Thin Driver for JDK 1.2 10.2.0.1.0
    Oracle JDBC Thin Driver for JDK 1.2 Patch 10.2.0.4.0
    Oracle JDBC Thin Driver for JDK 1.4 10.2.0.1.0
    Oracle JDBC Thin Driver for JDK 1.4 Patch 10.2.0.4.0
    Oracle JDBC/OCI Instant Client 10.2.0.1.0
    Oracle JDBC/OCI Instant Client Patch 10.2.0.4.0
    Oracle JFC Extended Windowing Toolkit 4.2.33.0.0
    Oracle JVM 10.2.0.1.0
    Oracle JVM Patch 10.2.0.4.0
    Oracle LDAP administration 10.2.0.1.0
    Oracle LDAP administration patch 10.2.0.4.0
    Oracle Locale Builder 10.2.0.1.0
    Oracle Message Gateway Common Files 10.2.0.1.0
    Oracle Message Gateway Common Files Patch 10.2.0.4.0
    Oracle Net 10.2.0.1.0
    Oracle Net Listener 10.2.0.1.0
    Oracle Net Listener Patch 10.2.0.4.0
    Oracle Net Patch 10.2.0.4.0
    Oracle Net Required Support Files 10.2.0.1.0
    Oracle Net Required Support Files Patch 10.2.0.4.0
    Oracle Net Services 10.2.0.1.0
    Oracle Notification Service 9.0.4.0.0
    Oracle Notification Service Patch 10.2.0.4.0
    Oracle OLAP 10.2.0.1.0
    Oracle OLAP API 10.2.0.1.0
    Oracle OLAP API Patch 10.2.0.4.0
    Oracle OLAP Patch 10.2.0.4.0
    Oracle OLAP RDBMS Files 10.2.0.1.0
    Oracle OLAP RDBMS Files Patch 10.2.0.4.0
    Oracle One-Off Patch Installer 10.2.0.4.0
    Oracle Partitioning 10.2.0.1.0
    Oracle Partitioning Patch 10.2.0.4.0
    Oracle Programmer 10.2.0.1.0
    Oracle RAC Required Support Files-HAS 10.2.0.1.0
    Oracle RAC Required Support Files-HAS Patch 10.2.0.4.0
    Oracle Real Application Testing 10.2.0.4.0
    Oracle Recovery Manager 10.2.0.1.0
    Oracle Recovery Manager Patch 10.2.0.4.0
    Oracle Required Support Files 32 bit 10.2.0.0.0
    Oracle Required Support Files 32 bit Patch 10.2.0.4.0
    Oracle Spatial 10.2.0.1.0
    Oracle Starter Database 10.2.0.1.0
    Oracle Starter Database Patch 10.2.0.4.0
    Oracle Text 10.2.0.1.0
    Oracle Text Patch 10.2.0.4.0
    Oracle UIX 2.1.22.0.0
    Oracle Universal Installer 10.2.0.4.0
    Oracle Wallet Manager 10.2.0.1.0
    Oracle Wallet Manager Patch 10.2.0.4.0
    Oracle XML Development Kit 10.2.0.1.0
    Oracle XML Development Kit Patch 10.2.0.4.0
    Parser Generator Required Support Files 10.2.0.1.0
    Perl Interpreter 5.8.3.0.1
    Perl Interpreter Patch 5.8.3.0.1a
    PL/SQL 10.2.0.1.0
    PL/SQL 10.2.0.4.0
    PL/SQL Embedded Gateway 10.2.0.1.0
    PL/SQL Embedded Gateway Patch 10.2.0.4.0
    Platform Required Support Files 10.2.0.1.0
    Platform Required Support Files 10.2.0.4.0
    Precompiler Common Files 10.2.0.1.0
    Precompiler Common Files Patch 10.2.0.4.0
    Precompiler Required Support Files 10.2.0.1.0
    Precompiler Required Support Files Patch 10.2.0.4.0
    RDBMS Required Support Files 10.2.0.1.0
    RDBMS Required Support Files for Instant Client 10.2.0.1.0
    RDBMS Required Support Files for Instant Client Patch 10.2.0.4.0
    RDBMS Required Support Files Patch 10.2.0.4.0
    regexp 2.1.9.0.0
    Required Support Files 10.2.0.1.0
    Sample Schema Data 10.2.0.1.0
    Sample Schema Data Patch 10.2.0.4.0
    Secure Socket Layer 10.2.0.1.0
    Secure Socket Layer Patch 10.2.0.4.0
    SQL*Plus 10.2.0.1.0
    SQL*Plus 10.2.0.4.0
    SQL*Plus Required Support Files 10.2.0.1.0
    SQL*Plus Required Support Files Patch 10.2.0.4.0
    SQLJ Runtime 10.2.0.1.0
    SQLJ Runtime Patch 10.2.0.4.0
    SSL Required Support Files for InstantClient 10.2.0.1.0
    SSL Required Support Files for InstantClient Patch 10.2.0.4.0
    Sun JDK 1.4.2.17.0
    Sun JDK extensions 9.2.0.1.0
    XDK Required Support Files 10.2.0.1.0
    XDK Required Support Files Patch 10.2.0.4.0
    XML Parser for Java 10.2.0.1.0
    XML Parser for Java Patch 10.2.0.4.0
    XML Parser for Oracle JVM 10.2.0.1.0
    XML Parser for Oracle JVM Patch 10.2.0.4.0
    There are 190 products installed in this Oracle Home.
    There are no Interim patches installed in this Oracle Home.
    OPatch succeeded.
    $
    $ more /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt
    Date & Time : Fri Jul 17 16:02:17 GMT-03:00 2009
    Oracle Home : /u02/app/oracle/product/10.2/Db_1
    OPatch Ver. : 10.2.0.4.7
    Current Dir : /u02/app/oracle/product/10.2/Db_1
    Command : -v
    Log File : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-02-17PM.log
    Date & Time : Fri Jul 17 16:38:05 GMT-03:00 2009
    Oracle Home : /u02/app/oracle/product/10.2/Db_1
    OPatch Ver. : 10.2.0.4.7
    Current Dir : /home/ora10g/8534387
    Command : napply -skip_subset -skip_duplicate
    Log File : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-38-05PM.log
    Date & Time : Fri Jul 17 17:53:30 GMT-03:00 2009
    Oracle Home : /u02/app/oracle/product/10.2/Db_1
    OPatch Ver. : 10.2.0.4.7
    Current Dir : /home/ora10g/8534387
    Command : lsinventory -detail
    Log File : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log
    $
    Please let me know if you need more info.
    Regards, and thanks in advance!
    Martin

    You were right. It was a permissions issue:
    hostname:/root# ls -ltr /u02/app/oracle/product/10.2/Db_1/lib/libjox10.so
    -r-xr-xr-x 1 ora10g oinstall 20041728 Apr 23 2008 /u02/app/oracle/product/10.2/Db_1/lib/libjox10.so
    Thanks.
    damorgan wrote:
    "is not writeable." means one of two things.
    1. It does not exist.
    2. Permissions are not set correctly.
    Determining which it is ... that is the first step.

  • Copy File from Terminal Server to Workstation Failure

    Hi
    For years client have been able to copy files from our Windows 2003 Terminal Server to their local workstation using:
    copy myfile \\tsclient\mydrive\myfolder
    However we upgraded to Windows 2012 Server R2 and now Windows 7 Pro clients cannot copy files.  The copy function creates the file name in their local folder but no content is sent after maybe 20 minutes or so the copy function times out and they get
    an error message saying that the application was unable to write to the file.  I have tried this function with my Windows 8.1 workstation and the file copies properly and it works fine for older Windows XP clients.  Does anyone know why Windows 7
    clients are experiencing this issue.
    Thanks
    Simon

    Hi Simon,
    The copy command should also work on the Windows 7 clients. Please provide the detailed error message when run the command on the Windows 7 clients.
    You could also use robocopy command to achieve this.
    Robocopy
    https://technet.microsoft.com/en-us/library/cc733145.aspx?f=255&MSPPError=-2147217396
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Finder error code -36: Copy file from macOS to external HD then copy it back to macOS: got error code -36

    Hi all,
    I got this error whenever copy file from my external HD to my macbook (internal HD).
    For more detail:
    last week, i copy a lot of my folder to external HD then i format my macbook to install new MacOSX Maverick.
    But when i copy my file back to my laptop, i got a lot of file with message:
    The Finder can't complete operator because some data in "some file name here" can't be read or written.
    (Error code -36)
    I try to research a lot of time on google and apple support communities but i still can not solve this problem.
    Someone, please help me and guide me how to solve this error because almost my file is my working data.
    Some infomation:
    My last version of my macbook: MacOS 10.9.3
    New version installed on my macbook: MacOS 10.9.3
    I just only copy file from my macbook to external HD without doing anything.
    Then i format my macbook to install new MacOS 10.9.3
    When i copy my file back, this error is happened.
    I try a lot of way like dot_clean, disk utility verified, repair, ....

    The files may be from the old user account and not accessible from the new one. I found this article, though see that it may not be current.:
    http://support.apple.com/kb/ts1402
    Pondini's guide also covers this topic, but it may be hard to find the relevant bit of information.
    http://pondini.org/OSX/Transfer.html
    In future, use Time Machine or Carbon Copy Cloner to make a complete backup of your system onto an external disk, before doing an erase/install.  Then you can use Transfer Assistant to bring your data and apps across.

  • CineXplayer on my iPad (2) error message stating I don't have permission to copy files from my hp pavilion 6 across to my iPad. I think I may have accidentally disabled iTunes Helper, but it is running in TM.

    I use CineXplayer on my iPad (2) and today have started getting an error message stating I don't have permission to copy files from my hp pavilion 6 across to my iPad. I think I may have accidentally disabled iTunes Helper, but it is running in Task Manager.
    I have removed iTunes and re installed.

    That's a comment in the file. It has no effect at all.

  • Error message when trying to copy files from memory stick to MacBookPro

    Trying to copy files from my memory stick to my MacBookPro and have started to get a crazy error message - "Attempting to copy to the disk Macintosh HD failed. You do not have enough access privileges for this operation."
    I've never had a problem before today. Any help will be welcomed!

    Try this. When the stick is mounted on your desktop, right click "Get Info" and at the bottom choose "ignore ownership on this drive." See if that works.
    Bryan

  • Error-36 and Error-42 when copying files from SD card

    Hello!
    I recently switched from a PC user to a mac user! Everything is great, but ever since I got the computer (refurbished 15in macbook pro) ive had problems with copying files from my SD card to my computer!! It so frustrating! Ive tried everything! I even called apple support, and after 30 minutes of calling came to no solution! I keep getting error-36 error-43 and sometimes error-8058 !!! I tried formatting with no success, because my computer cant read the disk! It is a PNY professtional 32gb sd card. Im not sure if this problem is happening due to the fact that I previousley used this same SD on my PC, but im going to return this computer if it doesnt fix! Ive also tried doing to terminal commands but it doesn't work! Please help!!
    - from a distressed youtuber

    I'm having similar problems and I'm using a 1Tb HDD ( USB connection) which has 3 partitions. I have discovered that after some time (not clear what triggers it) I start being unable to use one partition for backups. When I checked further I discovered that I cannot write any file no matter what size to it. The problem has normally disappeared for a while when I restart my computer. I've done disk verifies and things are fine. The other two partitions are Ok ... I use one for TimeMachine and the other for SuperDuper. This partition is primarily used for ChronoSync backups so I suspect that the problem is related to how ChronoSync backs up but I have yet to convince their tech support of that.

  • Windows 8.1 will not copy files from intranet site.

    I am using Windows 8.1 and I am trying to copy files from an Apple Time Capsule disk to a local hard drive. First I got the message box that said "Your Internet security settings suggest that one or more files may be harmful. Do you want to use it
    anyway?" and when I said okay nothing would copy. I went into my Internet options and added the Time Capsule disk to my site list in the Local Intranet Zone and reconnected the shared drive. Now I don't get the error box but it doesn't copy
    anything either. It does nothing. Any suggestions would be appreciated.
    Benjamin Greco Jr.

    I suggest you to run a malware check.. 
    May be its due to this malware "ZeroAccess rootkit/Sirefef"... What it does is it will block downloading and it will block you from visiting to some site... 
    Download and transfer this....
    Use one scanner at a time
    Download hitman pro 3.7  from uninfected pc and transfer to you pc and install (shareware and can be activated for 30 days free)and have a
    full system scan.. http://www.surfright.nl/en 
    alternatively you can use hitmanprokickstart usb bootable
    http://www.surfright.nl/en/kickstart
    And/or
    use malwarebyte  downloaded from uninfected pc and transfer to you pc and install and have a full system scan http://www.malwarebytes.org/products/malwarebytes_free/
    And/or
    use adwcleanerand  downloaded from uninfected pc and transfer to you pc and install and ave
    a full system scan..http://www.bleepingcomputer.com/download/adwcleaner/dl/125/)
    And/or
    use Junkware Removal  Tool  downloaded from uninfected pc and transfer to you pc and install andhave a full system scan
    http://www.bleepingcomputer.com/download/junkware-removal-tool/dl/131/
    And/or use TDSS Killer  downloaded from uninfected pc and transfer to you pc and
    install andhave a full system scan..: http://www.bleepingcomputer.com/virus-removal/remove-tdss-tdl3-alureon-rootkit-using-tdsskiller
    additional info
    If everything fails, you can use offline bootable resccue cd and do a full system scan... 
    https://support.kaspersky.com/viruses/rescuedisk
    http://windows.microsoft.com/en-us/windows/windows-defender-offline-faq
    How to create a defender offline bootable cd/pendrive
    http://www.pcandtablet.com/windows-8-antivirus-and-security/546/how-to-create-a-windows-defender-offline-usb-stick-to-remove-malware-on-windows-8-a.html
    Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

  • I'm getting error "copying files failed. the required file is in use". How do I find the file?

    I've found this question is elswhere but no answers.  I'm trying to consolidate my library to an external hard drive since I'm pretty sure my current drive is about to fail.  The entire process has taken me days due to one error or another.  This is my most recent error and so far there is no way around it since it does not show me what file is in use.
    Help?

    I used "Carbon Copy Cloner" to copy my library from one external disk to another.
    The "library" consists of a bunch of files and folders (see links at end).  You don't need CCC to copy it, just drag the whole iTunes folder in your Home > Music from one drive to the other.
    I pointed my iTunes library to the new location under iTunes preferences.
    No, don't do it with preferences.  Once you have moved the folder as above, start iTunes with the option key held down and guide it to the library.itl file on the new drive.  This is assuming you have been using iTunes's default settings and haven't been managing your media yourself.
    I used iTunes to "Consolidate Library" to verify that all files had been moved.
    Okay, in doing that you have  moved just your media to the new drive but left all your other library files on the old drive.
    iTunes succesfully copied/re-attached a lot of files before giving me the error that the disk could not be read or written to.
    Try it with my method.
    I began to troubleshoot the hard drive by checking the cables and scanning for errors.
    This disk checked out fine.
    I identified the failure and subsequent error was due to corrupted files.
    I watched the consolidation process and was able to see which file it was trying to copy before it errored out.
    I deleted the corrupted file and restarted the process (I repeated this numerous times).
    When the process seemed to be just about over, I got the error "Copying files failed. The required file is in use."
    I'm sure this is likely another corrupted file, however, it happens so fast that I have no way to identify what file is causing the problem.  I tried making sure no other processes were running and no other windows or media players were open.  I also tried to look for an error log but was unsuccessful.
    Any ideas?
    Disk Utility will scan for a corrupt directory but I don't think it works on the file level if it is a single file that was corrupted.  I know I have seen Carbon Copy Cloner pick up on single file error when I had one sitting on a bad sector of a drive several years ago.  If you can identify the corrupt file this way then you will have to use a backup copy since it is unlikely it can be rescued.
    If you have Diskwarrior it has a file check utility.
    You have, of course, restarted your computer before doing all this, and keep other computer activity to a minimum (don't play music while copying the files and don't use other applications that coupld potential be trying to get access to your files)?
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

  • Copying Files From a Remote Machine through "rcp" command not working.

    Hi All,
    I'm a new comer to this famous forum. I was trying to go through the PDF "Solaris Advanced User's Guide" .So in chapter 9-"Using the network" i came across "Copying Files From a Remote Machine". And the syntax was "rcp machinename:source destination" . And i got another note. It is like
    "The rcp command enables you to copy files from one machine to another. This command uses the remote machine's /etc/hosts.equiv and /etc/passwd files to determine whether you have unchallenged access privileges. The syntax for rcp is similar to the command syntax for cp.".
    But i maintained remote machine's IP address in my system's /etc/hosts file. But still i am unable to do the rcp from remote system to my system or vice versa.
    Always i am getting error message " **Connection refused**".
    Therefore please some one guide me how to perform the " Copying Files From a Remote Machine" through rcp command.
    Reghards
    Kartik

    Hi
    The inconvenience of using scp is that you have to type the password every time you stablish a connection. You can work around this, adding a key into the remote hosts_allow file. This implies in more maintenance.
    From the rcp man page:
    +rcp does not prompt for passwords. It either  uses  Kerberos authentication which is enabled through command-line options or your current local user name must exist on  hostname  and allow remote command execution by rsh(1).+
    From the rsh man page:
    + If you omit command, instead of executing a single command, rsh logs you in on the remote host using rlogin(1).+
    By default, rlogin is disabled on Solaris 10
    [SunOS 5.10/bash] root@wgtsinf01:/store/sun/operating-systems
    # svcs -a|grep -i rlog
    disabled       May_11   svc:/network/login:rloginSo, to use rcp you have to enable the rlogin service and set up all the configuration files. Particularly, as already suggested, I too suggest you to use scp. :)
    Cheers
    -- Andreas
    Edited by: Bank_Of_New_Zealand on 15/06/2009 13:09

  • Copying files from ASM to Remote ASM, Fails.

    Dear All,
    I am trying to copy files from ASM to Remote ASM disk groups, failing with the following error,
    ASMCMD-8201: (Bad argc for RDBMS:ASMCMD-8201) , any idea.
    Syntax: cp -- port 1521 +RECO_ABC/ABC/BKP/xyz.dbf sys@hostname.+ASM1:+RECO_XYZ/XYZ/xyz.dbf
    Thanks.

    cp -ifr <source file name> <user_name>@<host_name>.<Port Number>.<SID>:<targer path>/<target file name>
    user_name@host_name.<Port Number>.<SID>
    The user_name, host_name, and SID are required. The default port number is 1521.
    reason for error :
    It could be due to following reason.
    * not able to reach remote host.
    * Remote host listener is down.
    * Remote ASM Instance is not registered with listener and running non-default port.
    * sysasm remote connection does not work.
    * Incorrect password given for sys user.
    * Remote ASM Instance password file missing.
    We need to enable additional tracing for asmcmd connection to get a exact failure message.
    ++ set DBI_TRACE environment variable for asmcmd perl tracing.
    export DBI_TRACE=1
    ++ Now connect using asmcmd and re-produce the issue.

  • Can't copy file from SAP-directory to FTP server

    Hello,
    I can't copy files from the SAP server to the FTP server. The file is created with OPEN DATASET and CLOSE DATASET commands and is placed in the SAP-directory S:\usr\sap\DEV\DVEBMBGS00\work.
    I can see and read the file with transaction al11, so I know it's there.
    But the FTP command always gives the same error:
    S:\usr\sap\DEV\DVEBMBGS00\work\[FILENAME] errno 22: invalid argument
    I can connect to the FTP, but the put command keeps failing. Somehow, the file in the SAP directory can't be read, it seems, even when
    Any ideas?
    Thanks in advance.
    Dave

    Ok, I found out that I have to use SAPFTPA as RFC destination type, instead of SAPFTP, otherwise the folders can't be located.
    But with SAPFTPA I can't seem to connect to the FTP server. I've tested the connection with sm59 and it works, but for the FTP it doesn't work. When I use SAPFTP as destination type, it still works.
    What can I do?
    Thanks.

  • Unable to Copy File From Terminal Server to Client Share

    Hi
    For years client have been able to copy files from our Windows 2003 Terminal Server to their local workstation using:
    copy myfile \\tsclient\mydrive\myfolder
    However we upgraded to Windows 2012 Server R2 and now Windows 7 Pro clients cannot copy files.  The copy function creates the file name in their local folder but no content is sent after maybe 20 minutes or so the copy function times out and they get an
    error message saying that the application was unable to write to the file.  I have tried this function with my Windows 8.1 workstation and the file copies properly and it works fine for older Windows XP clients.  Does anyone know why Windows 7 clients
    are experiencing this issue.
    Thanks
    Simon

    Hi Simon,
    Initially please use latest RDP version 8.1 for windows 7 and check result. 
    What’s the file size which you are copying?
    Does this happens for all users and on all computers?
    You can try below method might resolve your case.
    1. Login to remote computer using Remote Desktop (RDP). 
    2. Open Task Manager in the remote machine
    3. Click the "Process" tab
    4. Locate a program called "rdpclip.exe"
    5. Right click and select "End process" to kill this program
    6. Click on "File" menu in the task manager and select "New Task (Run)"
    7. Type rdpclip.exe and press the button to start the process.
    By killing existing instance of the rdpclip.exe and restarting the program, you can get your copy paste work again in your remote desktop.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows 8.1 Network Share 0x8007003b Error Copying Files

    Hi All,
    I'm having an issue when copying files from a Windows network share. If the file is above 5MB it will start copying and then after a minute or two I will get an error such as:
    Interrupted Action
    An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
    Error 0x8007003B: An unexpected network error occurred.
    The network share is in a different office and is accessible over a point-to-point VPN, so the connection is not that fast. 
    But before everyone tells me to start diagnosing the router and or VPN please take note of the following:
    My colleague who is running Windows 7 can copy files from the network share fine
    If I run a Windows 7 VM on my Windows 8.1 laptop I can copy the files across fine
    I also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client
    VMs to a similar speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
    There is also a noticeable difference visually when copying using Windows 8.1 and Windows 7:
    Windows 7 - The progress bar progresses smoothly giving the current speed and estimated time remaining
    Windows 8.1 - The progress bar progresses in a jumpy fashion. E.g. it shows no progress, then after a minute it jumps and shows 16% progress, then shows no further progress, then jumps by another 18%. There is no estimated time remaining.
    I ran Wireshark to investigate what was going on at the network layer. I see the following behaviour:
    Windows 8.1 - The file is copying fine then all of a sudden there are a lot of TCP dupack packets. After which the Windows 8.1 client sends a RST packet and then the error pops up.
    Windows 7 - The file is copying fine then you also see a load of TCP dupack packets, however no error is displayed and it continues copying fine.
    I'd appreciate any help with this I'm hoping there are some settings I can change to make Windows 8.1 behave more like Windows 7!
    FYI originally posed here (but was advised to ask on Technet) - https://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-81-network-share-0x8007003b-error-copying/300bc9a4-597b-402a-b885-9dd6f6fb51a2
    Thanks,
    Zak

    Hi MeipoXu,
    Sorry, it has taken me so long to reply. I thought I had subscribed to receive updates on this thread, but I didn't see anything!
    I've ran the commands you gave but some of them did not work, I got the following error: 
    Set global command failed on IPv4 The parameter is incorrect.
    However, output of current settings are below.
    TCP Global Parameters
    Receive-Side Scaling State          : disabled
    Chimney Offload State               : disabled
    NetDMA State                        : disabled
    Direct Cache Access (DCA)           : disabled
    Receive Window Auto-Tuning Level    : normal
    Add-On Congestion Control Provider  : none
    ECN Capability                      : disabled
    RFC 1323 Timestamps                 : disabled
    Initial RTO                         : 3000
    Receive Segment Coalescing State    : disabled
    Non Sack Rtt Resiliency             : disabled
    Max SYN Retransmissions             : 2
    To answer your original questions.
    Do you mean the file below 5 MB will copy fine ?
    5MB is not a hard limit. If the file is small enough it will copy before it errors out. A file of around 5MB or so fails with an error.
    Have you tried to copy the files from another Windows 8.1 machine (This will help us to verify whether the issue is casued by the specific machine)?Have you tried to copy another file from the network share to have a check ?
    Yes I've tried from another Windows 8.1 machine and have the same behaviour. It is the same with different files from the network share. And the same with different network shares.
    I am seeing nothing in the event viewer when the error occurs. I do not believe this to be a VPN issue because I can recreate this situation perfectly. As I mentioned in the original post- I
    also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client VMs to a similar
    speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
    Basically, I had virtual machines all on the same local network. One virtual machine was hosting a file share with files on it. I created one Windows 7 VM and one Windows 8.1 VM. Using VMWare Workstation you can limit the network bandwidth to the VMs. When
    I did not limit the network bandwidth I could copy all files of all sizes fine. However, when I limit the network bandwidth to a speed of around 30-50KBps, the Windows 8.1 VM fails to copy files with the same error. But Windows 7 VM copies the files fine.
    The point of limiting the bandwidth in this way is to create a similar scenario to that I see when connecting over the VPN.
    This all leads me to believe there is some sort of issue with copying files from fileshares over slow connections using Windows 8.1.
    Cheers,
    Zak

Maybe you are looking for

  • How do you share photos on the same computer between users???

    Hello, I would like to know how to share photos on the same computer between users... My wife and I have different user accounts on our iMac and I can't figure out how to share photos. I tried everything as told by Apple but it seems you can only sha

  • [SOLVED] Xorg will not start

    Installed Arch Linux, replaced the nouveau driver with the nvidia-304xx drivers. After issuing startx, Gnome does not load. I get a brief flash of the nvidia logo, and then nothing. My results: [root@localhost ~]# cat /var/log/Xorg.0.log [ 810.015] X

  • CS4 Crashes on start-up w/ Vista 64

    This is the information I get when I open the Microsoft window and I don't understand any of it. Does anyone know what I should do to solve this dilema? Fred Problem signature:   Problem Event Name:                        APPCRASH   Application Name:

  • Why doesn't Adobe Reader XI load when viewing online PDFs?

    This is probably a stupid question, but I noticed something odd last night.  I have Adobe Reader 9 on my netbook and Adobe Reader XI on my main computer.  I had been browsing some online PDF files on my netbook, and in Adobe Reader 9 I get the Reader

  • ATI Radeon HD 2400 OS X Lion

    Framerates / graphics on Steam games and Blizzard (Star Craft II) have really taken a hit going from Snow Leopard to Lion. It seems there are some firmware updates ATI and or Apple need to release. Anyone else having serious graphics issues on OS X L