Lumetri Looks look very different between SG and PPro

Trying to create Looks in SG and use them as an effect directly appled to a clip(s) in PPro.  Works just fine except what you see in SG is vastly different than what you get in PPro, color-wise.  The clips are 8 bit HDV so some banding issues can occur-to be expected if I 'push' to far.  But this is really different, i.e. what appears grayish in SG is really yellowish in PPro, colors very different.  Any ideas?

First off there is a bug in the print dialog box with regards to the " proof" profile name and color preview. Make sure that if you change the proof set-up profile you also have to go to the proof set-up portion in the print dialog and re select the " current custom set-up" profile. This bug is completely adding to the confusing complexity of the print dialog box and is clearly in dire need of a complete overhaul.
Make sure the "match print colors" is checked as well to display the correct output to your device.
To answer your question...
>How can I get the workspace preview to match the Print dialog preview (which matches the printout better)?
In the proof set-up select the profile you want to apply in the " device to simulate" drop down. Select the rendering intent and if you want BPC as well. Make sure you select " Simulate paper color". Observe the preview and click OK.
Go to the print dialog and select " Photoshop manages color" - select your custom printer profile as well as applying the same rendering intent that you selected in the proof set-up - and if you are using BPC as well. Again, make sure you have "match print colors" checked. Also make sure you are not managing color in the printer driver as this will just double manage color and makes things more confusing.
Your working space preview in proof set up mode and your print dialog preview should match now - if not, go complain to Adobe about the retarded print features they offer...
As far as I'm concerned, they are completely lost in development as of now.

Similar Messages

  • What is different between #INITSEG and INITSEG in file bootsect.s?

    I read the file bootsect.s,I think the INITSEG is constant,
    and I think #INITSEG and INITSEG are always equal 0x9000,
    but why are they different usage? 
    Look:
    .text
    BOOTSEG = 0x07c0
    INITSEG = 0x9000
    entry start
    start:
    mov ax,#BOOTSEG
    mov ds,ax
    mov ax,#INITSEG
    mov es,ax
    jmpi go,INITSEG
    I want to know what is different between #INITSEG and INITSEG?
    How to use  #INITSEG and INITSEG?

    I think you are currently mixing up the two definitions. I think the assembler here uses the hash prefix (#) to declare values and a clean number for addresses and offsets.
    ... http://www.oldlinux.org/Linux.old/kerne … bootsect.s
    BOOTSEG = 0x07c0 ! original address of boot-sector
    INITSEG = 0x9000 ! we move boot here - out of the way
    start:
    mov ax,#BOOTSEG ! set register ax to #BOOTSEG = value 0x07c0
    mov ds,ax ! set register ds to register ax = value 0x07c0
    mov ax,#INITSEG ! set register ax to #INITSEG = value 0x9000
    mov es,ax ! set register es to register ax = value 0x07c0
    ! ds and ax cannot be filled directly, the value has to be set to the accumulator register (ax) first I think.
    ! Thats the reason for 4 lines instead of 2
    mov cx,#256 ! set register cx to #256 = value 256
    sub si,si ! set register si to 0
    sub di,di ! set register di to 0
    rep ! call the command in the next line
    movw ! move cx (256) words = 512 bytes from ds (0x07c0) to es (0x9000)
    jmpi go,INITSEG ! jump to the address go + 0x9000. go is the offset of the label "go" to the start of the moved memory segment
    go: mov ax,cs ! here is the label "go"
    Edit: That should be as86 (man as).
    Last edited by progandy (2013-02-21 13:25:03)

  • The different between Contain and equals

    I not sure about the different between contain and equals if I want to know if the string have some character or not ?
    thankyou

    HJava wrote:
    Thank you for all the reply,
    I have if (myTYpe.substring(0).contains(""u") ) work
    if if (myTYpe.substring(0).equals(""u") ) not work
    so I post this question, may be I made other mistake
    Thank youIf you wanted to see if the first character of the string was u then it is either
    myTYpe.charAt(0) == 'u'or startWith("u") or matches("^u.*$") etc, etc, etc.
    substring(0) will return the entire String, of course, which you would know if had actually looked at the API docs to find out what it did or even simply printed out the result to see what it did. Seemingly, however, you simply assumed you knew what it did and went on with that false assumption without bothering to even attempt to verify even though it was, already, not producing the results you expected. Instead, you focused on "the difference between contains and equals" which is self-evident in their names and obviously not the problem to begin with.

  • FB60 screen change layout different between DEV and PRD

    Hi,
    I'm having problem with transaction FB60. When i try to change the layout in PRD, in screen Edit System Setting, some of the field showing 0 length. For example in WBS element field, in DEV show length 24 but PRD show length 0. I try to compare the version but it is same (program & table structure - ACGL_ITEM). When I debug the program, found out that it will get the structure from sap internal c program call 'AB_GET_CX_DATA'. So, maybe this program version are different between DEV and PRD.
    Anybody knows what is the cause of this problem? Or maybe somebody can tell me how to check sap internal c program.
    Thank you very much.

    Yes. FB60 is Enter Vendor Invoice. In this screen you can see a table with column such as GL Acct, Debit/Credit, Amount in DC, Cost Center and others. You can add or remove some of the field using Table Setting and create Screen Variant. My problem is, the length of WBS Element and Profit Center field is 0. How to change the length.
    I already searched in forum but I only found how to create screen variant.
    Thanks.

  • What's Different Between ODI and FDQM ?

    I need to know What's Different Between ODI and FDQM ?

    At is simplest ODI is an enterprise scale ELT tool that can cope with moving very large amounts of data bwteen heteregeneous systems. It requires a fair degree of technical knowledge to use well and that the user is pretty competent with SQL. It is not really an end user tool and the jobs tend to be lights out scheduled processes with a limited user interface for executing these jobs. FDQM is more of a data quaility tool which gives the average end user the out of the box functionality to be able to transform and load data into various target systems. It is not designed to move very large amounts of data efficiently i.e. multi millions of lines of data like ODI. However it does have a rich user interface that provides an easy to use mapping engine, a repeatbale controlled data load process and has a host of in built reporting and audit features which would have to be built from scratch in a tool like ODI

  • Why is different between consumption and spare part material Amount in Accounting?

    I go to mb51
    in Accounting document there is different
    l found the standard price was changed in the last . it was changing from 850,000 to 1000
    i don't know why is different between consumption and spare part material Amount Accounting??? please help me . how can I solve it?

    pay attention just first document has a different accounting amount . in others there aren't different .see these screenshot :

  • What is the different between statement and preparedstatement?

    hi,
    recently i have attended a telephonic interview. they asked me what is the different between statement and preparedstatement? and when u will use them? Hi! can any one say me the original difference??

    sorry dear,
    i am already shortlisted. and monday is my HR round.
    . Every 1 is not like u.
    So you have read the examples and explanations that you found when you googled, and you have read the javadoc and you still don't understand? And you are shortlisted? For what? I hope you won't do server programming.
    I will give you a few hints.
    Escaping of data
    Storing of dates
    Safer
    Faster

  • How the implementation differs between BW and BI , Is BI takes more time fo

    Hi All,
    I would like to know difference between implemenation and time lines for MM as mentioned below.
    How the implementation differs between BW and BI , Is BI takes more time for implementing MM module  than on BW?
    Thanks in advanced. (Full points will be awarded)
    With Regards,
    PCR

    Hi Timo,
    Thanks for response!
    But as i read from the following url: http://docs.oracle.com/cd/E15051_01/apirefs.1111/e10653/oracle/jbo/ViewObject.html, the setQueryTimeOut(int timeOutMills), the timeOut is mentioned in milliseconds. Please correct me if I am wrong.
    and i have overriden the executeQuery() method in the View Object Impl class as shown below:
    public void executeQuery() {
    Map sessionScope = ADFContext.getCurrent().getSessionScope();
    sessionScope.put("MyQuery", this);
    try {
    super.executeQuery();
    } finally {
    sessionScope.remove("MyQuery");
    throw new JboException("Query Taking too long to respond");
    and in the JAVA class i am calling the above method like this:
    monitor.setQueryTimeOut(6);
    monitor.executeQuery();
    But the issue is:
    1. The above exception message is getting carried forward to other pages as well. I mean somewhere in the session/ADFContext this message is being saved and error comes up/pops up when i click on other tabs of the page. How do i clear this?
    2. The above exception message is coming for the first time but when i click the 'Submit' button second time, i am getting the results and also the message that 'Query is taking too long to respond'. This should not be the case, everytime it should show the same message as the timeout limit is less and the query should end without fetching the results.
    Kindly let me know how to resolve the above issues, any pointers will be helpful.
    Thanks in advance.
    Edited by: user9223904 on Nov 3, 2012 4:42 AM

  • What is the different between component and component type in extract struc

    Hi All,
    What is the different between component and component type in the Extract Structure?
    I used them, but I never really know the different between them yet.
    Thanks,
    Grace

    The difference between Component and Component Type are:
    Component This is essentially the field name in the extraction structure. These can either be SAP delivered field names or custom field names (e.g. Y* or Z*).
    Component Type This defines the data definition for the field, along with associated attrributes and descriptions for anything using that Component Type, to define the corresponding Component. If you double-click on any Component Type in an extraction structure, it will show you the definitions that have been setup for that Component Type (will display as Data Element but it's essentially synonymous - Component Type refers to structures and Data Elements refer to tables).

  • What is different between Analytics and VC Forum?

    Hi Experts!
    I don't know what is different between Analytics and VC forum in SDN. of course, Analytics is not Visual composer.
    But, I guess that most of analytics questions will be related to Visual Composer in this Analytics Forum.
    How about your opinion?

    Hi Young
    Analytics is business process oriented and thus it's domain is BPX hence it is placed under forum for BPX(Business Process Expert).
    VC is a tool and it is in technology domain.
    First we discuss a scernario based on particular business process. Then we prepare detailed level of analysis-reporting and actionable analytics this business process would need. Then we use tools like VC to accomplish this actionable analytics.
    Hope this helps
    Regards
    Pradip

  • What's different between OWB9i and Discorver4i?

    1.What's different between OWB9i and Discorver4i?
    2.Discorver4i is ROLAP or MOLAP or HOLAP?

    1.What's different between OWB9i and Discorver4i?
    OWB9i is a tool used to create data marts or data warehouses. You would use it to create the ETT Extraction, Transformation,
    and Transfer or Load (ETL). Discoverer is a reporting tool.
    2.Discorver4i is ROLAP or MOLAP or HOLAP
    Discoverer 4i is a ROLAP tool. Relational OLAP.
    Christopher
    www.iloveapple.com

  • What' s different between color and swatches?

    what' s different between color and swatches?

    1.What's different between OWB9i and Discorver4i?
    OWB9i is a tool used to create data marts or data warehouses. You would use it to create the ETT Extraction, Transformation,
    and Transfer or Load (ETL). Discoverer is a reporting tool.
    2.Discorver4i is ROLAP or MOLAP or HOLAP
    Discoverer 4i is a ROLAP tool. Relational OLAP.
    Christopher
    www.iloveapple.com

  • Different between CIF_GEN4_CONVERT_DATETIME and CIF_GEN_CONVERT_TIMESTAMP

    hi guys,
    may i know what is the purpose and different between CIF_GEN4_CONVERT_DATETIME and CIF_GEN_CONVERT_TIMESTAMP?
    another question is sy-datum is client dependant date?
    thanks.
    BK.

    First FM OUTPUT is {UTC time stamp in short form (YYYYMMDDhhmmss)}
    Second FM used based on plant it will give Plant date
    CALL FUNCTION 'CIF_ORDER_TIMEZONE_GET'
           EXPORTING
                IV_PLANT    = L_PLANT
           IMPORTING
                EV_TIMEZONE = L_TIMEZONE.
      CALL FUNCTION 'CIF_GEN_CONVERT_TIMESTAMP'
           EXPORTING
                IV_TIMESTAMP           = I_EXPLOTIME
                IV_TIMEZONE            = L_TIMEZONE
           IMPORTING
                EV_DATE                = E_R3_DATE
           EXCEPTIONS
                TIME_CONVERSION_FAILED = 1
                OTHERS                 = 2.
      IF SY-SUBRC <> 0.
        E_ERROR = CON_X.
        CLEAR E_R3_DATE.
      ENDIF.
    If it is useful please give me reward point.
    Thanks
    Murali Poli

  • CIC0 Partner determination different between crmd_order and CIC0

    Hi experts,
    We have a problem with the partner determination. We have a partner who has relations with several other partners. In the partner determination procedure, we have indicatied that the partner needs at most one occurence and a selection limitation of 1. There is also an access sequence that makes sure that the right partner is found.
    This all works fine in the CRMD_order transaction. You get a list of partner to choose from when you enter the main partner. Unfortunately, this does not work in the CIC0 transaction. In this case the system takes the top partner of the list.
    Does anyone know why partner determination in CIC0 seems to ignore the setting of selection limitation and occurences? Why is this different between crmd_order and CIC0? How can we make it the same?
    Thank you for your input,
    kind regards,
    Ragina Mahadew

    Hi Ragina, welcome to SDN.
    My opinion is that main purpose for that, was to speed up the interaction registration by the call center agents.
    But if you want to display the partner selection pop-up in CIC0 t-code, you can try to implement note 487734 for that.
    Hope that helps!
    Kind regards,
    Garcia

  • What are different between gateway and mangement server in scom ?

    Hi all,
    can anyone let me know What are different between gateway and mangement server in scom ?
    thanks,
    Sengottuvel M

    Hi,
    Hope this can answer you question
    About Gateway Servers in Operations Manager
    http://technet.microsoft.com/en-us/library/hh212823.aspx
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for