Lumia 1020: Destinations no longer load into HERE ...

After I installed the WP8.1 update with Cortana on my Lumia 1020, the map destinations that Cortana finds (Cortana took over the magnifying glass button) do not load into the HERE Drive+ app when I click the "voice nav" button. Instead, HERE Drive+ opens with no destination set. I have to enter the destination manually with the keypad inside HERE Drive+, which is very annoying. Is this a known issue?

Hi, soakedwolverine.
Welcome to the forum!
When you mentioned you updated it to WP8.1, are you referring to the official Lumia Cyan update? Go to Settings > Extras+info. How are you trying to set up the map destination using Cortana? BTW, where are you located? Thanks.

Similar Messages

Here Drive + freezes on Lumia 1020

Hi. I have a Lumia 1020. Version 4.0 of Here Drive + is unusable since it freezes periodically. Versions 3.0X on my 920 are ok. I,have tried to disable traffic info, map info, nothing works.

Hi, ewgoforth.
Welcome to the Nokia Support Discussions!
Are you only experiencing this issue when using HERE Drive+ app? How about another HERE apps or any app that you have on the phone? What exactly are you doing on the phone before it freezes? You can try un-installing the app and then install it back as a basic troubleshooting. This can also help us further isolate the issue.
Thank you for reachin out to us about this. We appreciate it a lot as product quality and customer satisfaction are really important for us. Products like HERE Drive evolve over lifetime and we work hard to bring new features, functions and fixes to make HERE Drive even better. For this, your feedback is essential.
We hope to hear from you soon.

Signupshield will not load into Fire fox 4

I was starting to experience problems with compatibility with previous versions of firefox so I updated to firefox 4. I use a program called Signupshield and it will now no longer load into firefox?

It's not compatible with FF 4 yet. Please read this article:
http://protecteer.crmdesk.com/answer.aspx?aid=13412&back=search.aspx%3F

RAW Compatability between Nokia Lumia 1020 and iPhoto/Aperture

Hi everyone,
Does anyone now if the RAW Compatability between Nokia Lumia 1020 and iPhoto/Aperture works?

Here's the format the 1020 has for RAW.

Lumia 1020 battery life with here+

My Lumia 1020 battery life is very poor when using here+ for navigation. The phone also gets hot. Typically it only can be used for about two hours.
Even when connected to the car cigarette lighter outlet the battery consumption is faster than charging and the phone gets hot.
Is this normal or should I send it for service? The phone is about 4 months old and in normal use the battery life is more than one day and I have not noticed any heating either. I have installed all available updates regularly. I have also installed the maps I normally use into the phone.

Thanks,
I understand TomTom is not a phone and has less fuctions than Lumia. For this reason its power consumption should also be lower. I believe though, that a phone maker like Nokia has put a lot more efforts to reduce and optimise power consumption.
I have now been testing with a 3.1 A charger in the car and it is able to charge the battery while navigating. The device does get hot, however, but as you say it is normal.
I did also try to use it when biking and was using a 10 Ah Powerbank with 2 A outlet. That did not seem to be able to overcome phone's power consumption, but the battery was slowly reducing charge. This arrangement would anyway allow several hours navigating, which is quite enough for normal use. Without this external battery its useless for longer biking or walking tours, unless you turn off navigation when it is not necessary. This is a bit complicated, though. TomTom is even worse for this kind of off-line use, its battery seems to be quite small.
I also noticed that it is important to remember to turn off navigation when keeping the phone in pocket, it really gets uncomfortably hot there.
I'll also have to study Lumia's manual a bit more carefully, as I had often difficulties in changing targets and turning off navigation. Probably just because I had misunderstood some instructions.

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem with my new camera? Will upgrading elements to a newqer version solve the problem?

NEF's for the D7100 should work with the latest version PSE13
You can download here and try free for 30 days:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

CR files will no longer show in bridge and will not load into PS

Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
I tried image processor in bridge to make them PS files and got the following error message.
I tried to load one of the CR files from the finder dirretly and got the following error message.
Any help would be appreciated. If the post goes inanswered I will call tech support again. aloha UP

HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

Lumia 1020 SIM unlock code no longer accepted afte...

I am the original owner of an AT&T Lumia 1020. At some point AT&T sent me a SIM unlock code on my request, which allowed me to use a T-Mobile SIM without any problems. After a few months I sent this 1020 to a Nokia repair center for warranty service because of unstable reception. I received the repaired phone, and the reception seems to have been fixed. But..
After receipt I found that the phone had been re-locked to AT&T. The IMEI shows up as being the same as before (makes sense), but the old unlock code no longer works. Contacting Nokia at the time they told me, sorry, talk to AT&T. Unfortunately AT&T sent me the exact same unlock code as they had given me before (also makes sense, it's the same phone), but it doesn't take.
My questions;
- am I making some kind of obvious newbie mistake?
- can a repair or component replacemetn change some info in the hardware that prevents unlock?
- will unlock services find the same non-working unlock code if I try to have them unlock it?
Thanks for any help!

I see. Thanks for sharing your experience, Joe1020. Have you coordinated this with your network provider to see if they can provide you another code? Let us know how it goes.

Downloadhelper just stopped working and I can no longer get the icon to load into the tool bar.

I downloaded the add on Downloadhelper and it worked for many video captures and then stopped. I reinstalled it but the icon will not load into the toolbar or the tools under View -> Toolbars -> Customize. I have gone through the troubleshooting guides and everything seems to be enabled properly. At the same time Firefox stopped allowing me to open more than one Firefox screen.

Contact the carrier and ask them what is going on.

Nano SIM adaptor got stuck inside my Lumia 1020

I forced to remove the nano SIM adaptor and after I tried a regular micro SIM and my Lumia 1020 gave me an error message saying SIM was not detected. I read many horrors stories like mine :-( I'm wondering if that happened to someone here on the forum and my question is: how much it costed to fix it and how long did it take? Thanks

Hi arturmeireles
I had similar problems. I bought a Lumia 1520 to try out the size of the screen and overall size of the beast. Must say that I love it although it is a little too big for my liking (a 5.5" would be just right). Anyway as we know the 1020 hosts a MicroSIM card and a 1520 uses a NanoSIM.
In Australia it is illegal to hold two SIMs for the same number so I purchased a $15 SIM adapter pack so I can use the NanoSIM on my 1020. BIG MISTAKE.
To make sure I wouldn't loose my adapter I placed it into the 1020. Wheh it came time for me to swap phones I had a little trouble getting the SIM tray out. I made sure the NanoSIM was installed correctly to the adapter and inserted it into my 1020. I got the Error, SIM is not loaded or not being detected. I tried to take out the SIMtray but it was stuck solid. I tried several suggestions from different forums, but no good. I even damaged the poly cover for the SIMtray.
The next day I sent my 1020 to the repair centre. Today I heard back saying the tray and the damage to the SIM slot is beyond repair and recommended not worth fixing as it was going to cost nearly $600 to repair. My new 1520 was only $530.
I highly recommend NOT using a NanoSIM and MicroSIM adapter for the Lumia 1020. There are a number of forums that have addressed this very issue. Some people have had some success in removing the SIM but most others haven't. Looks like I'll be waiting for the successor of the 1020 (better have a NanoSIM as standard).
If there are any Nokia/Microsoft Technicians that can recommend a safe way of using a NanoSIM in the 1020 I'd love to hear about it and then I'll consider buying another. Until then I hope this prevents others from getting caught.
May I recommend that all new Lumia's stick with one size SIM - if it is Nano so be it, or Micro fine. Or if the 1020 is intended on being a phone to stay in the market for a longer time please update the SIM housing so that these SIMs do not get stuck or replace the MicroSIM tray to be a native NanoSIM housing.
Cheers
tropolite

Lumia 1020 - Poor Performance

This issue is fairly intermittent. I've had the phone since the week it was released in the UK and it's always had pretty decent performance in day to day use (Same with all the Windows Phone devices i've owned over the years).
However, recently my Lumia 1020 has a number of performance issues.
I am currently running the developer preview, but i've done this for a long time and not had issues like this. I'm just wondering if people have experienced any of the below (There are other times it will just generally become unresponsive to input, these are just a selection fo them).
I'm going to wipe the phone today, but thought i'd check in case others are having the same problems. I don't think it's a hardware fault, but it does seem like some sort of background task is taking up resources. I've tried removing any apps I don't NEED to use on a daily basis but it still has the problem.
I know i'm running developer preview...So I'm not moaning about the performance of my phone here (Although some builds through the dev preview ARE final code as far as I know), I just want to see if anybody has experienced the same problems and hopefully fix them.
Scrolling through the start screen tiles are slow to show their contents. Sometimes the icons take 10 seconds to load. And when I move from the top of the start screen to the bottom fairly quickly, I will sometimes just end up with a black void (The Arrow at the bottom to move to the Apps list is visible.
Getting into my camera roll from the Nokia Camera OR Nokia Camera Beta apps can sometimes be excruciatingly slow. I'm not talking a little annoying, but put down your phone and go get a coffee whilst it loads. It generally makes WP look bad if i'm trying to show somebody a picture I just took.
Sometimes i'll tap a letter in the All Apps list, and the phone will just lock up for 10-20 seconds before showing the list of letters.
Returning to the start screen sometimes shows "Loading..." or "Resuming..." for a long time (IMO it shouldn't do this at all, and never has in the past)
Loading the camera app, or apps in general can take a painfully long time. Sometimes with apps like Skype when the phone eventually becomes responsive again the app crashes.

I've tried that but it doesn't seem to help. I'm pretty sure when scrolling through the start screen (Except maybe right after the phone has started up) the live tiles should be instantly visible.
I just got the Cyan update this morning, which I think puts me on the current latest stable release, as far as I know. I'm going to try doing a full reset on the phone (Should still keep me on the dev preview build w/ Cyan I believe?)
Since getting the Cyan update, it hasn't made a difference.
I am going to try a full reset of the phone, and if it's still performing this way i'll use the recovery tool from Nokia to roll back to the latest "retail" build. I'll lose Cortana until the UK 1020's get Win 8.1 Update 1 but it could fix my problems perhaps.

Nokia Lumia 1020 Keeps Freezing

I have the Nokia Lumia 1020 and have been using it as my primary phone since its launch in the states. I love the phone and, up until now, I haven't had any issues. However, I'm currently on a trip overseas and I've had nothing but trouble with the phone. It continually freeze, requiring me to issue a soft reboot (volume down + power buton hold). Even after issuing the reboot, the phone doesn't always act in the desired behavior. I find myself issuing the reboot several times in a row. Moreover, the phone starts to get really, really hot and acts strange (changes my time, etc..). Here is examle of what I go through, step by step:
I'm navigating my phone, normally. Looking at pictues, browsing the web, pretty basic stuff
The phone will freeze on whatever screen I'm on. I have seen it screen while I'm in the Nokia Panorma app, 6tag, and in a handful of basic apps/built in functions
No keys or buttons are responsive
I issue a soft reboot by pressing the down volume and power button at the same time for 10+ secs
Very rarely does the phone reboot and act in a normal fashion. It will usually freeze right away and I have to issue the reboot again, and again, and again
Eventually, the phone will reboot into a somewhat working session.
My date and time is set to an aribtrary one, even though I have my phone set to automatically obtain the time (I'm currently +12 ahead from my EDT origin). It actually sets my date back to March (it is currently October) and an earlier time
Any text messages I receive come in and are not sorted to the bottom of the current conversation (I have to hunt them down from previous conversations within the same thread) - I think this is due to the date/time issue
I have had situations where my last photos taken got deleted (i.e., probably never saved correctly before the freeze)
The phone will get really, really hot
My Situation/Setup
I live on the east coast of the US (GMT -4)
I'm curently in Singapore (GMT +8)
I have the phone set to roam internationally
The phone is roaming on a 4G signal
I have the date/time set to a 24 hour clock and to get time automatically
I have wi-fi enabled, but I am usually not on a network when I freeze (I have been though)
OS version: 8.0.10327.77
Firmware revision: 3045.000.1325.0001
RM-877 ATT-US varient
Lumia Amber software
I've tied uninstalling any apps I *may* have loaded since the issue began, but I have had no luck. I've also messed with the date and time to set it manually. Again, no luck. I'm about to disable photo and video backups (I currently have them set to "best quality").
My questions:
Anybody else having this issue
Anybody have an idea as to how I can solve for it.
Thanks in advanced for any help.

rusted74 wrote:
Hi there, I am experiencing the same issues. Was wondering if your hard reboot worked?
Hi. 'Same' may not be the exactly similar. Please provide us details regarding your case. Does it happen randomly or when accessing certain apps on the phone? What connections are enable on the phone (Bluetooth, tap+send, data connection, WiFi)? How about the background apps running on the phone?
Ensure that the software of the phone is updated. Latest update is the 'Black Update' currently rolling out globally: http://www.nokia.com/global/support/software-update/wp8-software-update/
Aside from the phone's software, it's also important to check that all system apps are up-to-date. Please refer here: http://discussions.nokia.com/t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082
Hi, mmansour.
To verify, the issue starts after updating the phone to Black. Correct? Or have you been encountering the issue prior updating the phone? After updating the software to Black, make sure that all system apps are updated as well. You may refer to the above link for the system apps.

Lumia 1020 Freezes, Battery Heating Up, OS Crashes...

Hi there everyone, this is my first post here, I hope I can get some help from you guys regarding my problem with my lovely Lumia 1020.
10 days ago, I received my Lumia 1020 ( it was a gift from a friend from Norway), I live in Iraq. So warranty isn't provided here cause I went to Nokia Care in my country, they checked the IMEI and they told me that this phone wasn't imported by them, so no warranty is provided for it.
Once I powered up my phone, completed settings, it checked for an update and asked me to download it. And sure I did download it at once!. Kept updating until it reached the latest Lumia Cyan Update. Checked and saw I have a WP 8.1 phone.
Took some photos, here and there, everything was going good. Plugged in the charger to charge my phone. Then an hour later I went to check the charge and I was surprised to see my lovely Lumia 1020 heating up like crazy!!! .. I'm talking about severe heating, not a normal one due to charging.
Plugged out the phone from the charger ( original Nokia charger provided with the original box ), and I tried to unlock it, but no way! it doesn't respond to anything at all, Glance screen was stuck at the time of an hour ago. Quickly opened my laptop and googled the issue and did a soft reset at once. Then put the mobile in front of the air conditioner until it cooled down. Time/Date was reset ( very annoying ) but everything was normal ever since until at some random time, the phone freezes. Sometimes it doesn't heat up, I wait for 5 minutes or so and the phone reboots by itself. But there are times that the phone is stuck for hours ( no heat though ) so I have to soft reset it manually. And there are times when the phone freezes and heats up like crazy and I soft reset it on purpose being afraid that something might happen to the phone.
Googled everywhere, tried everything: Replaced charger, Replaced SIM card, Tried Airplane mode, Factory Reset, Nokia Software Recovery, Disabling Background apps, Disabling/Enabling Location w/wo NFC, Deleting FB & Skype, Disabling Glance & Double Tap to wake, Downgrading to WP 8 ( both Amber & Cyan via Nokia Care Suit ), ... etc everything software related has been tried. And the phone still freezes randomly. Which leads me to say that it's definitely a hardware defect that is causing these issues as my friend has the exact phone, everything enabled, and not a single freeze.
I'm desperate here, if anyone of you could give me an advice, I would be thankful.
Thanks and sorry for the long post!

I'm sorry to hear about your troubles with it.
As you mentioned here, you've done everything that can be done to your phone software wise, and it still plays up.
And as you further mentioned, it's related to hardware failure.
As your device is not covered by warranty in Iraq, you will either have to pay for the repairs down there or send it back to your friend in Norway who can then send it in for warranty repair/replacement.

Can no longer boot into Mavericks 10.9.5

My problem is that I can no longer boot into Mavericks 10.9.5 on my mid-2012 Macbook Pro. The problem arose suddenly without any known major changes to my software or hardware. The booting process freezes with the apple visible and the circle below it spinning endlessly. Every several seconds, the display very briefly gets brighter, then the circle starts spinning again and the process repeats itself. It never gets to the user login screen.
Other than keeping various apps up to date, I don't recall any recent major operating system or other major software updates, nor have I made any recent hardware changes. I've searched a multitude of threads and and tried any number of fixes without success. Here's what I've tried so far (and probably a few more that I can't remember): (1) Repaired the startup disk with both Recovery HD -> Disk Utility and single-user mode -> /sbin/fsck -fy; (2) Repaired the startup disk permissions with Recovery HD -> Disk Utility; (3) Reloaded the Mavericks 10.9.5 operating system twice; (4) deleted /Library/Preferences/com.apple.loginwindow.plist; (5) reset PRAM and NVRAM; (6) booted with "D" pressed and ran the Apple hardware test, which ran for about 40 minutes and reported no problems; (7) tried booting from a bootable clone of Mavericks 10.9.5 on an external hard drive, which also failed at the same place with the apple showing and the circle below it spinning endlessly. ***Oddly, I am able to boot from a bootable clone of Mountain Lion on an external hard drive. It's Mavericks that won't boot.***
Here is the part of the system log the repeats itself over and over and seems to correlate with the repeated failed attempts to complete the booting process. Any help would be appreciated beyond words:
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Server is starting up
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 retained (2 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (1 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 retained (2 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: init_page_flip: page flip mode is on
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 54 modes for display 0x00000000 [54, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 51 modes for display 0x00000000 [51, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 --- last message repeated 1 time ---
May 2 12:49:01 SCH-MacBookPro kernel[0]: IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 343
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: mux_initialize: Mode is dynamic
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 54 modes for display 0x00000000 [54, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 51 modes for display 0x00000000 [51, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: WSMachineUsesNewStyleMirroring: true
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: MPServiceForDisplayDevice: Invalid device alias (0)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: GL mask 0x10; bounds (0, 0)[2560 x 1440], 51 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162f0ab5, Unit 4, Rotation 0
UUID 0x3ef17c2fc9ab601507ec022fbd95576c
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[4096 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f0041: GL mask 0x20; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: GL mask 0x5; bounds (2560, 0)[1680 x 1050], 54 modes available
Active, on-line, enabled, built-in, boot, Vendor 610, Model a005, S/N 0, Unit 2, Rotation 0
UUID 0xde23f9c1cf7b915b2afe83aecee77b54
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: WSSetWindowTransform: Singular matrix
May 2 12:49:01 --- last message repeated 1 time ---
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: GL mask 0x10; bounds (0, 0)[2560 x 1440], 51 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162f0ab5, Unit 4, Rotation 0
UUID 0x3ef17c2fc9ab601507ec022fbd95576c
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003d: GL mask 0x2; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f0041: GL mask 0x20; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003f: GL mask 0x8; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: GL mask 0x5; bounds (435, -1050)[1680 x 1050], 54 modes available
Active, on-line, enabled, built-in, boot, Vendor 610, Model a005, S/N 0, Unit 2, Rotation 0
UUID 0xde23f9c1cf7b915b2afe83aecee77b54
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXPerformInitialDisplayConfiguration
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x04248378: Unit 4; Vendor 0x610 Model 0x9227 S/N 372181685 Dimensions 23.50 x 13.23; online enabled, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f0041: Unit 5; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x04280142: Unit 2; Alias(2, 0x5); Vendor 0x610 Model 0xa005 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (435,-1050)[1680 x 1050], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXMuxBoot: Boot normal
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000003, accelerator 0x00004f2f, unit 0, caps QEX|MIPMAP, vram 1024 MB
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000003, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000003c, accelerator 0x00004907, unit 2, caps QEX|MIPMAP, vram 1024 MB
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000003c, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor enabled for tile size [256 x 256]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXGLInitMipMap: mip map mode is on
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: Unit 4; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: Unit 2; ColorProfile { 3, "Color LCD"}; TransferTable (256, 12)
May 2 12:49:01 SCH-MacBookPro.local launchctl[356]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
May 2 12:49:01 SCH-MacBookPro.local launchctl[356]: com.apple.findmymacmessenger: Already loaded
May 2 12:49:01 SCH-MacBookPro.local com.apple.SecurityServer[23]: Session 100021 created
May 2 12:49:01 SCH-MacBookPro.local UserEventAgent[357]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
May 2 12:49:01 SCH-MacBookPro.local airportd[71]: _doAutoJoin: Already associated to “schuyler”. Bailing on auto-join.
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Setting the initial value of the magsave brightness level 1
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Login Window Started Security Agent
May 2 12:49:01 SCH-MacBookPro.local ManagedClient[362]: ApplePersistence=YES
May 2 12:49:01 SCH-MacBookPro.local SecurityAgent[363]: Failed to create agent mechanism, failing authentication!
May 2 12:49:01 SCH-MacBookPro.local com.apple.authd[84]: engine[353]: error creating mechanism agent
May 2 12:49:01 SCH-MacBookPro.local com.apple.authd[84]: engine[353]: evaluate returned -60008 returning errAuthorizationInternal
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Login Window - Returned from Security Agent
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: ERROR | -[LoginApp performAuthPluginRequest:] | AuthorizationRef doesn't have a username. Exiting.
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (1 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (0 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: loginwindow connection closed; closing server.
May 2 12:49:03 SCH-MacBookPro com.apple.launchd[1] (com.apple.loginwindow): Throttling respawn: Will start in 1 seconds
May 2 12:49:04 SCH-MacBookPro.local loginwindow[364]: Login Window Application Started
May 2 12:49:04 SCH-MacBookPro com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 7 seconds

Hi
You got a prob I think, if you can boot a windows, MSconfig, startup options might restore the boot files.Only other thing is to try and either load a new windows and let it setup a boot file, or perhaps a win98 startup disk, and fdisk, then set active partiton, which will set an MBR. But that would leave a load of work to do, I think I'd opt for an install of XP, and let it repair existing installation, and make a new boot file.
Hope you don't need the info on disks. If you do, I would install another HDD, load XP, then copy original Disk to save place.
Good luck
Jocko

Essbase Studio Performance Issue : Data load into BSO cube

Hello,
Having succesfully built my outline by member loading through Essbase Studio, I have tried to load data into my application again with Studio. However I was never able to complete the data load because it is taking forever. Each time I tried to work with Studio in streaming mode (hoping to increase the query speed), the load gets terminated due to the following error : Socket read timed out.
In the Studio properties file, I typed in, oracle.jdbc.ReadTimeout=1000000000, but the result has not changed. Even if it did work out, I am also not sure the streaming mode is gonna provide a much faster alternative to working in non-streaming mode. What I'd like to know is, which Essbase settings I can change (either in Essbase or Studio server) in order to speed up my data load. I am loading into a Block Storage database with 3 Dense, 8 Sparse and 2 attribute dimensions. I filtered some dimensions and tried to load data to see exactly how long it takes to create a certain number of blocks. With ODBC setting in Essbase Studio, it took me 2.15 hours to load data into my application where only 153 blocks were created with the block size of 24B. Assuming that in my real application the number of Blocks created are going to be at least 1000 times more than this , I need to make some changes in settings. I am transferring the data from Oracle Database, with 5 tables joined to a fact table (view) from the same data source. All the cache settings in Essbase are in default mode. Would changing cache settings, buffer size or multiple threads help to increase the performance? Or what would you suggest that I should do?
Thank you very much.

Hello user13695196 ,
(sorry I no longer remember my system number here)
Before it comes to any optimisation attemps in the essbase (also Studio) environment you should definitily make clear that your source data query performs well at the oracle db.
I would recommand:
1. to create in your db source schema a View from your sql statement (these behind your data load rule)
2. query against this view with any GUI (Sql Developer, TOAD etc.) to fetch all rows and measure the time it takes to complete. Also count the effected (returned) number of rows for your information and for future comparing of results.
If your query runs longer then you think is acceptable then
a) check DB statistiks,
b) check and/or consider creating indexes
c) if you are unsure then kindliy ask your DBA for help. Usually they can help you very fast.
(Don't be shy - a DBa is a human being like you and me :-) )
Only when your sql runs fast (enough for you; or your DBA says is the best you can achieve) at the database move your effort over to essbase.
One hint in addition:
We had often problems when using views for dataload (not only performance but rather other strange behavior) . Thats the reaons why I like more directly to set up on (persistence) tables.
Just to keep in mind: If nothing helps create a table from your view and then query your data from this table for your essbase data load. Normaly however this should be your last option.
Best Regards
(also to you Torben :-) )
Andre
Edited by: andreml on Mar 17, 2012 4:31 AM

Lumia 1020: Destinations no longer load into HERE ...

Similar Messages

Maybe you are looking for