Lumia 1020 - Disable Post Processing?
Preface: I've only had the Lumia 1020 for 48 hours.
Problem: I've noticed that when taking pictures with the Nokia Pro Camera application, the preview after capturing the image is awesome. If I then go to look at the captured image, there is a short pause, and suddenly the picture goes soft, detail is lost, colors become horribly skewed. It would seem that there is some massive post processing being done after the image is archived.
Request: Is there any way to disable this post processing? It's taking wonderful pictures and destroying them.
I'll see if I can take a screen capture to show what I'm talking about and I'll post again after work.
Lumia 1020 Quirks.
- Post processing done even on "raw" 34MP images.
- The entire screen is powered when using Peek. Despite being OLED and Nokia specifically stating otherwise.
- Can turn on (but not off) camera in the background on a call. App doesn't open but shutter does and spins up CPU.
So after looking at the 5MP version (attached) it seems that it is indeed post processing it after the fact and saving it that way. Which begs the question.... Why? Isn't the photo review going through the Nokia Pro Camera app anyway? Why is it doing post processing (I've also had it remove red-eye automatically when reviewing photos)?
Stil, I want to know; how can I disable it?
*Edit: Trying to attach the large format photo as well...
*Edit2: After uploading both and flipping back and forth between the "review" image, the 5MP saved image, and the highres saved image, they are all the same, meaning that it is doing the post processing as it is saving the 5MP & 34MP image. This means there is no way to truly undo it. (It also means things like auto-redeye reduction are permanent, and can't be undone, tweaked, etc.)
So.... thoughts?
Lumia 1020 Quirks.
- Post processing done even on "raw" 34MP images.
- The entire screen is powered when using Peek. Despite being OLED and Nokia specifically stating otherwise.
- Can turn on (but not off) camera in the background on a call. App doesn't open but shutter does and spins up CPU.
Attachments:
WP_20130812_12_46_36_Pro.jpg 2045 KB
WP_20130812_12_46_36_Pro__highres.jpg 10902 KB
Similar Messages
-
Lumia 920 pre & post processing of pics after Ambe...
Hey folks, im starting this thread in order to grab more attention from Nokia. As they are already aware of the yellowish tint in photos since the amber update, I wanna just add something extra. I have attached 2 sample images of pictures below. Both photos were shot at ISO3200 to really show what this phone is capable of. Each picture will come with a before processing happens and after. Not only can you tell theres a yellowish tint in the post processing pics, but you can also see severe noise reduction. Sure, ISO3200 is a bit on a smartphone, but take a close look at the pics before the processing happens and tell me that isn't a amazing picture at ISO3200. White balance is spot on, and sharpness is excellent. Im sorry, but the aggressive noise reduction Nokia applies is not needed on this phone. Nokia I think most people buy these lumia 920 and 1020 phones based on cameras. I think most people can agree that while we may not ask you to remove your noise reduction settings, but rather add an option for us users who would like to skip out on the post processing that happens. You can clearly see in the before and after pics below how amazing an ISO3200 shot from this phone is.....let us have it please!!!
Attachments:
After Processing.jpg 3241 KB
wp_ss_20130912_0005.png 1705 KBTHE OTHER COMPARISON HERE:
Attachments:
After Processing (2).jpg 3166 KB
wp_ss_20130912_0006.png 1597 KB -
Lumia 1020 adds yellow tint to photos
I'm posting this because numerous other people have posted with the same major issue, and there seems to be no update on what is happening...
http://discussions.nokia.com/t5/Nokia-Lumia/Lumia-1020-blue-or-green-hue-tint-applied-after-taking-p...
http://discussions.nokia.com/t5/Nokia-Lumia/Lumia-1020-Disable-Post-Processing/m-p/2031912/highlight...
My 1020 will take a crisp, beautiful shot and then after viewing it for a few seconds, a yellow tint is added to the photo and some clarity seems to be lost. It happens with any white balance setting and isn't fixable within Creative Studio.
I may be mistaken, but it seems like this problem just started. (I have had my phone for about 5 days). I will try to re-create some photos I took last week and see if, indeed, this odd processing problem just started.
I would really like to know if this is a hardware issue or a software issue, and if Nokia is aware of this and if they plan on providing a solution.
I attached 2 screenshots. The first is the photo I want and the second is after it is processed.
For a few seconds I can see the photo that I want... I paid $200 to have that photo when I want it, what's going on?
Attachments:
BEFORE PROCESSING.jpg 201 KB
AFTER YELLOW TINT ADDED.jpg 158 KBThanks Ceron - I suspected as much that it was the Amber update (ironically why else would it be so aptly called the "Amber" update? ) and that it would require a firmware level fix for the camera. I would hope that if Nokia suspects its on MS side that they will be working very closely with them...and quickly. I guess I am hoping that the update that ruined it was on the side of Nokia in the Amber update (since they did add their own features to it). Either way I certainly hope they get their act together and issue the fix in GDR3 or whatever you want to call the next one. I still dont understand how Apple can issue an over the air update in days time without all this carrier review BS and the rest of us have to wait weeks or months for something. That needs to be addressed if they hope to compete. Should we be hammering MS support sites as well? Anyone know of links to dedicated WP support site and if anyone has posted this there?
-
Hi All,
DB:11.2.0.2.0
Oracle Apps:12.1.3
O/S:AIX 6.1 64 bits
There is one custom concurrent program(other custom programs do not have this error) that completes in error message in all the instances(DEV,TEST,etc) as below:
_"Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte"_What could be the cause of the error message and the fix?
Did anyone face this error before? What is the recommendation please?
Thanks for your time!
Regards,There is one custom concurrent program(other custom programs do not have this error) that completes in error message in all the instances(DEV,TEST,etc) as below:
_"Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte"_What could be the cause of the error message and the fix?
Did anyone face this error before? What is the recommendation please?This indicates that the report has not been processed by the OPP -- Please make sure you have completed all the steps as per XML Publisher docs.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/xmlp_ebiz/index.html
http://docs.oracle.com/cd/B25516_18/current/acrobat/115xdoug.zip
Thanks,
Hussein -
Lumia 1020 Freezes, Battery Heating Up, OS Crashes...
Hi there everyone, this is my first post here, I hope I can get some help from you guys regarding my problem with my lovely Lumia 1020.
10 days ago, I received my Lumia 1020 ( it was a gift from a friend from Norway), I live in Iraq. So warranty isn't provided here cause I went to Nokia Care in my country, they checked the IMEI and they told me that this phone wasn't imported by them, so no warranty is provided for it.
Once I powered up my phone, completed settings, it checked for an update and asked me to download it. And sure I did download it at once!. Kept updating until it reached the latest Lumia Cyan Update. Checked and saw I have a WP 8.1 phone.
Took some photos, here and there, everything was going good. Plugged in the charger to charge my phone. Then an hour later I went to check the charge and I was surprised to see my lovely Lumia 1020 heating up like crazy!!! .. I'm talking about severe heating, not a normal one due to charging.
Plugged out the phone from the charger ( original Nokia charger provided with the original box ), and I tried to unlock it, but no way! it doesn't respond to anything at all, Glance screen was stuck at the time of an hour ago. Quickly opened my laptop and googled the issue and did a soft reset at once. Then put the mobile in front of the air conditioner until it cooled down. Time/Date was reset ( very annoying ) but everything was normal ever since until at some random time, the phone freezes. Sometimes it doesn't heat up, I wait for 5 minutes or so and the phone reboots by itself. But there are times that the phone is stuck for hours ( no heat though ) so I have to soft reset it manually. And there are times when the phone freezes and heats up like crazy and I soft reset it on purpose being afraid that something might happen to the phone.
Googled everywhere, tried everything: Replaced charger, Replaced SIM card, Tried Airplane mode, Factory Reset, Nokia Software Recovery, Disabling Background apps, Disabling/Enabling Location w/wo NFC, Deleting FB & Skype, Disabling Glance & Double Tap to wake, Downgrading to WP 8 ( both Amber & Cyan via Nokia Care Suit ), ... etc everything software related has been tried. And the phone still freezes randomly. Which leads me to say that it's definitely a hardware defect that is causing these issues as my friend has the exact phone, everything enabled, and not a single freeze.
I'm desperate here, if anyone of you could give me an advice, I would be thankful.
Thanks and sorry for the long post!I'm sorry to hear about your troubles with it.
As you mentioned here, you've done everything that can be done to your phone software wise, and it still plays up.
And as you further mentioned, it's related to hardware failure.
As your device is not covered by warranty in Iraq, you will either have to pay for the repairs down there or send it back to your friend in Norway who can then send it in for warranty repair/replacement. -
Nokia Pro Cam photos post-processing makes yellowi...
Hello there! I'm here to report a common problem which happens while taking pics with Nokia Pro Cam on my lumia 920. When you take a pic it has right colours and is very sharp but after apps' post-processing the pic turns yellowish and a bit softer. It doesn't look too good after that treatment. I'm asking for patch that would prevent this problem. While I was at Windows Phone central-forums I saw that I'm not alone with this issue.
There is photos when one can see this issue.
First is just after taking pic and second is after processing it. I guess one can see very clear difference.
Attachments:
wp_ss_20130829_0004.png 1693 KB
wp_ss_20130829_0005.png 1377 KBshadow118 wrote:
I see the same thing on my 620 (yes, I know Pro Cam is not officially supported by the 620 and would not work as good as on 920 or 1020, but I found a way to get it the interface is just so much better)
When I take a picture with manual focus, in the screen the pic looks sharp, but when i open the gallery, it changes (wll, postprocesses) to blurry
just a reminder, using unsupported apps may cause serious hardware problems in short/long term. i'm sure u won't be happy when u see melting plastic parts and some smoke on your device
The silence will fall -
Hi,
I have a problem with my Lumia 1020 video recording.
1- The video is very noisy at night in normal indoor lights.
I didn't notice when this problem occured because from the time I bought the phone I didn't used it to record videos (only used for photos). The noise will be more visiable if you watch the video in a HD TV.
2- There is a problem of maybe OIS. When I move the phone faster that problem occurs.
I got this problem when I updated to latest Nokia Camera app from the store.
I have already done soft-reset and hard-reset and also problems are the same with Microsoft Camera too.
watch the video below so you will understand more.
https://www.youtube.com/watch?v=GBu6Mh-xyf8
Let me know of any solution. The problems are really annoying, specially the video noise with 41 MP camera.
//Edit: I have latest firmware update Lumia Cyan and all the apps are up to date.I have this problem:
https://onedrive.live.com/redir?resid=46D770656F3ED974!176&authkey=!ACPt80rdWJT96EI&ithint=video%2cm...
It is impossible to take video footage keeping the camera still. It vibrates completely on its own. There is no way this is supposed to happen. Is this the quality of nokia products now?
I contacted nokia about this issue, and apparently because the phone is an international version it does not come under European warranty. I bought the phone from amazon UK and sent to a UK address, and when i asked the seller where the phone was from was told it was dispatched from the EU. So a product that is bought and sold from within the EU does NOT come under european warranty. This is NOT right - if this is allowed that its pretty unethical.
Anyway, so i am told by Nokia to contact the company i purchased the phone from. I do, they say they will honour the 1 year warrenty on Nokia's behalf. Great, so i send the phone back for repair. I have just today (11th Sept) recived the phone back to me, after months (since 20th July). And the above video is the first thing i test!
So now i am going to have to go through the process of trying to get it repaired (again!?), replacement (dont want if all Nokia phones are this quality), refund (preferably as this experience has left me a poor opinion of Nokia).
I am posting this in case Nokia wants to respond, and for anyone who may also have these problems. I will update accordingly in the future.
Ok here are some of the other threads i have posted too. -
Lumia 1020 random rebooting + time/date out of syn...
Same problem. Lumia 1020. Automatically set to Feb 2014.
Moderator's Note: Post was moved and amended the title.Hi, ckamfung. Welcome to Microsoft Mobile Community! When did you start encountering this? Does your phone's date+time reset after it reboots? Try disabling the apps running in the background. Go to Battery Saver > select an app > turn off the "allow app to run in the background" option. And then, monitor the phone's behavior. You may also consider checking if there's an update available for your phone: Settings > phone update > check for updates.
For the date+time issue, it will change to the default values if you reset the phone by pressing down the power button for around 10 seconds. More info can be found here: Why do the date and time get reset by themselves in my Lumia phone?. Note that the link is intended for the US, but you may visit this link to go to your local support page: http://www.microsoft.com/en/mobile/support/locations/. We'd love to hear your response. -
Video post processing/quality control no longer works in flash player
I use to watch videos via http://www.channel5.com and was able to use the post processing features in the AMD driver to improve the picture quality.
Now, it no longer works. Is this because hardware acceleration isn't working?
For a while I was able to use it in Internet Explorer, Sometimes in Firefox but never in Chrome. Now even with internet explorer it doesn't seem to work correctly.
I am using the latest flash versions for all platforms and the latest browser and driver version from AMD too.
Has Adobe changed something with the latest version of flash which cause a problem with the AMD Driver? Why is there no longer a Hardware Acceleration check-box in Internet Explorer?
I am using Windows 8.1 and I have the setting in the AMD CCC "apply current vdieo quality settings to internet video" checked. I have made sure in Firefox and Chrome hardware acceleration is enabled both in flash player settings and in the browser settings.
Thanks for any pointers you can give.It may be for you, but it isn't for me in Internet Explorer, by comparison though, there is the box available in Chrome and Firefox...although in Chrome it doesn't do anything.
I did some more testing; With Internet Explorer hardware acceleration seems to be dependant on the website you watch.
For example, using IE to visit http://www.dailymotion.com the post processing options work fine, but when on http://www.channel5.com they do not. Is there any reason why this is?
As for other browsers, it seems hardware acceleration just isn't working at all since post processing never works on chrome.
On Firefox it seems to behave the same way as IE, e.g it works on some sites but not others.
I thought I may be able to get around this by disabling the pepper flash player in chrome, but it doesn't seem to make any difference, either its still using the built-in one or it still doesn't work at all with hardware acceleration.
Either way none of these achieve what I was able too before, get hardware acceleration working with http://www.channel5.com . -
Sql upgrade 2000 to 2005 post processing error
Dear People,
I have successfully upgraded sql from 2000 to 2005 and im doing the post processing steps for upgrade using the sql tool and im getting error at the step " creare sap stored procedure" .im pasting the error messages below.
<b>dev_w0</b>
RROR: schema user dcb has administrator fixed server role (user_name() is 'dbo').
C This is not allowed. Please check the Server Roles of user dcb.
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
sapinst_dev.log<b></b>
ERROR 2007-12-04 10:54:48.62 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step ExeProcs with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
ERROR 2007-12-04 10:54:48.62
lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]SELECT permission denied on object 'MSSSOURCE', database 'DCB', schema 'dcb'.
<p> SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.</p>
regards
rajhi siddesh,
i also get the following errors in sql,this could be the main reason
1.Msg 15157, Level 16, State 1, Line 1
Setuser failed because of one of the following reasons: the database principal 'dcb' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 56
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 60
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 208, Level 16, State 0, Procedure sap_droproc, Line 65
Invalid object name '#allnames
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DCB
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, ASCII, optimized
pid 3236
Wed Dec 05 12:07:00 2007
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3236) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Dec 05 12:07:04 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >voyager_DCB_00 <
DpShMCreate: sizeof(wp_adm) 11808 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05CB0040, size: 4232896)
DpShMCreate: allocated sys_adm at 05CB0040
DpShMCreate: allocated wp_adm at 05CB1B30
DpShMCreate: allocated tm_adm_list at 05CB4950
DpShMCreate: allocated tm_adm at 05CB4980
DpShMCreate: allocated wp_ca_adm at 06024C10
DpShMCreate: allocated appc_ca_adm at 06029260
DpShMCreate: allocated comm_adm at 0602A9D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 060AB880
DpShMCreate: allocated gw_adm at 060AB8C0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060AB8F0
DpShMCreate: allocated wall_adm at 060AB8F8
Wed Dec 05 12:07:05 2007
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( voyager) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >voyager_DCB_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Wed Dec 05 12:07:45 2007
ERROR => W0 (pid 2840) died [dpxxdisp.c 14441]
ERROR => W1 (pid 2844) died [dpxxdisp.c 14441]
ERROR => W2 (pid 1904) died [dpxxdisp.c 14441]
ERROR => W3 (pid 3308) died [dpxxdisp.c 14441]
ERROR => W4 (pid 4056) died [dpxxdisp.c 14441]
ERROR => W5 (pid 4088) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1244) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2888) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2932) died [dpxxdisp.c 14441]
ERROR => W9 (pid 2892) died [dpxxdisp.c 14441]
ERROR => W10 (pid 3116) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2096) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2480) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:07:55 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Dec 05 12:07:55 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2840 Ended no 1 0 0
1 DIA 2844 Ended no 1 0 0
2 DIA 1904 Ended no 1 0 0
3 DIA 3308 Ended no 1 0 0
4 DIA 4056 Ended no 1 0 0
5 DIA 4088 Ended no 1 0 0
6 UPD 1244 Ended no 1 0 0
7 ENQ 2888 Ended no 1 0 0
8 BTC 2932 Ended no 1 0 0
9 BTC 2892 Ended no 1 0 0
10 BTC 3116 Ended no 1 0 0
11 SPO 2096 Ended no 1 0 0
12 UP2 2480 Ended no 1 0 0
Dispatcher Queue Statistics Wed Dec 05 12:07:55 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Wed Dec 05 12:07:55 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Dec 05 12:07:55 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:00 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >voyager_DCB_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1680) (SOFT_KILL)
Stop icman
killing process (2612) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1680 HANDLE:1608)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1680 HANDLE:1608)
wait for end of icman
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2612 HANDLE:1612)
DpStartStopMsg: send stop message (myname is >voyager_DCB_00 <)
NiIMyHostName: hostname = 'voyager'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Dec 05 12:08:13 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1548 (pos=2)
SiSelNRemove: removed sock 1548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3236) [dpxxdisp.c 10371]
Good Bye ..... -
hello ...Have a good day every body
let's talk about Body Style for nokia 1020 it's nice. simple .i like it
have great battery life i test it .wothout using lumia 1020 for 12 hour still 100 % so it's good
but with Data packets almost 8 hour with wi fi 24 hour or less so it's like all new phones
camera 41 mp cool cam no way also the zoom
hot Screen i like it when i Watch move or vidoes or game .. HD
nokia lumia 1020 have a problem too .. hopeing they fix it for us
The menu is not displayed with a simpla way .. Difficult access to data or programs or games pr pic
Photo Gallery and video Gallery is not cool too
when i want to add new videos to my phone i need to delete the old video from my fom first after the put it again
I can not access to the files normaly form my phone i have to enter from my pc
can't kill processes when i'm out of it i have to enter to the app to end it
so in the end the softwere not cool but the hardwere is coolPhoto Gallery and video Gallery is not cool too
When you view a Photo in the Photos Hub just pinch it and you get a scrollable gallery
can't kill processes when i'm out of it i have to enter to the app to end it
The coming update for the OS will have a kill button on the open apps in the multitasking view
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem.. -
My Nokia Lumia 1020 camera not working anymore
I bought this my Nokia Lumia 1020 with so much excitement, and it arrived on Saturday...got to it on Sunday night and dived in to the camera...amazing! I said... Just this evening wanted to take an interesting night composition, pressed the camera button...instead of it to come on, was greeted with a humming sound.... Of sort... The app wouldn't open, tot it was d app with the problem...den turned on my flashlight app, but also greeted the d strange sound...also the light won't come on... I am really disappointed and getting forstrated by Nokia...
what can I do?Hello, victovic2000.
Thank you for posting and welcome to the Nokia Support Discussions.
Sorry for the inconvenience it is causing you. By the way, how was the phone now? Is it still doing the same thing? Is it happening to the default camera only or same with the other camera app? Did something happen to your phone prior to the issue? Is your phone's software up-to-date?
You may check if there's an available software update for your phone by going to Settings > Phone updates. Note that a stable internet connection is needed. We encourage you to use Wi-Fi instead. You may also consider doing a 'full reset' by going to Settings > About > Reset your phone. Make sure to backup your files to avoid data loss. Here's how: http://www.windowsphone.com/en-US/how-to/wp8/basics/back-up-my-stuff.
Let us know the outcome. -
Been having issues for a few months now and haven't been able to find any solutions online. I'm having an issue where I can not send messages to certain numbers and I am just receiving the "Can't send" message as if I had no signal. What's even more confusing is that I have no issue receiving messages from these numbers, I am just incapable of replying. Currently this is only affecting a few contacts, but obviously this is an extremely annoying issue. If you have any advice or tips to solve this issue I would greatly appreciate it. Oh and I've just carried out all possible updates and still the problem persists.
-Thanks for taking the time to read this, MuirCHi MuirC,
We appreciate your effort in posting your concern on the forum. By the way, are you still experiencing the SMS issue? If yes, have you tried using another SIM card if it makes any difference? Make sure to use the original Micro SIM and not the modified one. You may also try checking this Nokia Lumia 1020 - Troubleshooter for a possible resolution. Any update is very much appreciated. -
Here Drive + freezes on Lumia 1020
Hi. I have a Lumia 1020. Version 4.0 of Here Drive + is unusable since it freezes periodically. Versions 3.0X on my 920 are ok. I,have tried to disable traffic info, map info, nothing works.
Hi, ewgoforth.
Welcome to the Nokia Support Discussions!
Are you only experiencing this issue when using HERE Drive+ app? How about another HERE apps or any app that you have on the phone? What exactly are you doing on the phone before it freezes? You can try un-installing the app and then install it back as a basic troubleshooting. This can also help us further isolate the issue.
Thank you for reachin out to us about this. We appreciate it a lot as product quality and customer satisfaction are really important for us. Products like HERE Drive evolve over lifetime and we work hard to bring new features, functions and fixes to make HERE Drive even better. For this, your feedback is essential.
We hope to hear from you soon. -
Lumia 1020 no add Internet APN menu
I have a Lumia 1020 and the current carrier in the ABOUT section of the settings is Australia Model 909 windows 8.1 When setting up for ATT's Consumers Cellular, when I try to edit the Internet APN their is no add Internet APN menu selection under SIM settings. The selection reads : Network selection and the choice is ethier automatic or search for networks. I need some help, can this device be used in the USA.
Hi, WmBill. When you say "windows 8.1", does it run with the Lumia Cyan update? You may see it under the Settings > extras+info. Make sure that all system apps are updated by scanning the QR codes from this link: Nokia Windows Phone 8 App Updates. About your next concern, is your phone locked to your network operator? Are you located in Australia? Check if both countries have the same frequency bands, see: http://www.worldtimezone.com/gsm.html. Also, it is best to coordinate with your network operator to inquire if they have partnered with the service provider in the US so that you may be able to use their services.
Keep us posted. BTW, we appreciate your visit here on our forum.
Maybe you are looking for
-
Adobe connect 9.3 pdf & ppt recording problem
i have adobe connect 9.3 and 9.1.2 on premise i installed in my own server my problem is the ppt and pdf in share pod does not show in the recording . any thing show well in recording but when i share pdf or ppt in the share pod it does not appear in
-
Why is the "Blood Glucose" missing from health app?
I have been using the apple health app to help track my blood glucose level for my physician. The blood glucose was essential for my treatment and tracking. The data was lost at a critical moment for me to introduce my progress to my physician. Thi
-
Why a thread can not be restarted?????
Hi, I have a thread and I started it by claling thread.start() and some where in my code i want to say thread.start(), which jvm won't allow me to do so... could u please reason me elaborately????????? Thanks Sato.
-
MCS-7815-I1-CC2/IPC3 SATA RAID problem
HI there, my IBM MCS 7815 server does not boot when i enable SATA raid in BIOS. The documentation recommends to turn it on but when i do i get a STOP error at OS startup. Does anybody know how to solve this? Thanks in advance, Jayz
-
Script for creating grid spreads of photos from the Adobe Bridge
Hi, Someone once showed me a script for being able to select multiple images while looking at them in the bridge and making grid layouts on pages from them. Does anyone know how to do that? Thanks!