Lumia 520-Internet Explorer & UC browser close aft...

Hi,
I am using nokia Lumia 520 since 15 days, I am facing problem with browsing. Both internet explorer & uc browser close abruptly in the middle of browsing after browsing for sometime. If anybody knows the solution for this problem plz let me know

have you checked you are up to date with the latest firmware for your device and that you are up to date with Nokia apps from the Store? also try performing a soft reset.

Similar Messages

  • A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab

    I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
    At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
    I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
    I have reset IE9. Same problem.
    I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
    If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
    This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
    Any suggestions for how to solve this (other than using software rendering)?

    Thanks again for your reply. I appreciate the time you have taken to respond.
    I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
    I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
    This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
    The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
    1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
    2. Use another browser - I have no problems with either Firefox or Chrome

  • Internet Explorer JApplet hang close intermittent jre 1.4.1

    I've browsed several similar topics here. So let me add my problem.
    The environment is Internet Explorer 6.0 and the JRE release is 1.4.1. I have an applet that will either put up a JDialog subclass or an instance of a JOptionPane (for errors and warnings). Sometimes the browser closes fine on close (x button in top right of frame). Sometimes it hangs. I am not sure if destroy is ever getting invoked when it hangs as I tried putting a System.out.println() in and never saw the output. When it closes properly I do briefly see the outputs in the jre plugin window. Another similarity to other posts is this applet uses sockets (mySQL) and the destroy method is where I close the connection. Other posts claim using sockets for one thing or another, so that may be a culprit. Oddly, I have not seen posts that reference previous versions of the JRE so I am guessing maybe it's a problem with the 1.4.1 JRE? It's a wild shot but I am trying to ascertain commonality amoung all the similar posts. There doesn't seem to be a difference in being a signed jar or not. I can supply further info to anyone who might have an idea. Also, I can not reliably reproduce.
    Thanks,
    Walt

    Maybe the problem with the applet is that you are using the same instances of JPanels and JComponents in the Applet each time you intialize it. I had this problem, because I was reusing the panels to reduce the load time to generate them, but the problem was that when I did this, I couldn't write in a JTextField of this panels, and when I try to close the IE window after trying to write in a JTextField, the IE crashed.
    Maybe it isn't your problem, but it may help.

  • No Audio in internet explorer, captivate playbar close button not working

    I did a simulation video in adobe captivate 5.5, on uploading it to Netdimension s LMS, the course plays audio via firefox but wont play audio from Internet explorer.
    Also Firefox autoresumes from where the user last stops but won't in Internet explorer. Also the exit button in my captivate playbar doesnt work neither in my internet explorer browser nor firefox.
    I also noticed that the LMS didnt mark the course completed after taking all the slides.
    Please help!

    Hi there
    My guess is that you are opening those from version 3 in a different manner than you are the version 4 sims. As I understand it (and as explained in the link) the ability to close a window is dependent on the browser as well as the manner in which the window was opened to begin with.
    I suggest you begin by scrutinizing what is different about the version 3 files that you are seeing. Where are you running them from? How are you displaying them?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Lumia 520 internet radio

    I have a new Lumia 520. In the specifications it lists Internet radio, FM radio. How do I get these?

    jtsrinivas wrote:
    other features are it would have given front camera , how much have it saved by not providing it....
    3G without front camera, what about skype users ???
    I suppose the price difference between the 620 and the 520. Can't expect to pay bottom dollar and get all the features of the top of the range phones.

  • Forms Central - Internet Explorer Recommended Browser Settings

    I created a form in Adobe Acrobat X Pro, added it to Forms Central and then linked it to our company website for members to complete and then click submit.  I have a member that said her submit button will not work, she clicks it and nothing happens.  My question: What is the recommended browser settings for Internet Explorer to be able to submit the form.

    Most of the major browsers have some sort of PDF preview built into them. These preview capabililties don't have enough functionality to allow filling in of PDF Forms. Therefore regardless of browser or platform (Mac) you likely need to install our Acrobat Reader plugin. Additionally in some cases you will need to tell the browser that you want to use our (Adobe Reader) plugin when displaying PDF. Each browser is a little different, but the concept is the same.
    Andrew

  • Lumia 520 - Internet stops working sometimes. Nee...

    I have been using a Nokia Lumia 520 for 6 months.  Sometimes the internet stops working.  Only after removing and replacing the battery, the problem is resolved.  It happens say 2 or 3 times a month.  Is this a common problem?  Does it indicate a problem with the hardware or software?
    Thanks
    Solved!
    Go to Solution.

    Switching the phone off doesn't really switch it all the way off, it just puts it into a kind of "sleep" mode, but the O/S is still running. How would it know that you've pressed the power switch otherwise? Even if it's interrupt-driven rather than the switch being polled constantly, the CPU still has to be running to register the interrupt (see http://en.wikipedia.org/wiki/Interrupt for a description of what an interrupt is).
    By pulling the battery out you're forcing the phone to shut down completely. There's no way it can continue to run without power.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Lumia 800 Internet Explorer

    Whenever I try to open internet explorer on my lumia 800 will say it's loading then return to the start screen it will let me in the odd time but mostly it won't. Everything else works fine I can go into pages via Bing and apps work fine. Does anyone else have this problem?

    Hi bonabona86,
    Thank you for your post and welcome to the forums!
    It may be that your Internet Explorer or one of it's components has been corrupted somehow. We would advise you to either reset or update your phone. To check if your phone has an update available, navigate to Settings > Phone update. If an update is available, you can update your phone on Zune. Updating will (unless it is just a firmware update) re-install the phone software, including the Internet Explorer and it's components. 
    To reset your phone, navigate to Settings > about > reset your phone. This will, however, wipe all data off the phone, so it is first advisable to fully synchronise your phone with Zune and make sure that all your contact and calendar entries have been saved on your Microsoft account (ex-Windows Live ID). Note that all SMS messages will be lost, as there is no way of backing them up.
    Let us know if this helps,
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Lumia 520 internet issues

    My phone has been working fine since I got it a few months ago, but it got dropped on the floor this morning and since then some internet services has failed to work.
    The internet app and the email app work just fine, except for twitter and Facebook websites. For some reason the Facebook and twitter app also cannot load anything. Text messages can be received and seen through the notification bar, but the messages app cant load them. Anyone know of a fix for this? Or shall I have to send it off for repairs?

    Have you tried deleting them and then re-adding them to your phone?
    If the issue persists, look into installing the 8.1 Developers Previer.
    Alternatively, if you can puchase apps on your phone consider buying Metro Mail - it's a Gmail app with functionality similar to Android and iOS apps, and an app I use for work emails.

  • Flex application does not run in Internet Explorer(IE) browser

    The IE browser has the required version of the Flash player installed as a Active X control.
    Looked at the remoting-config.xml and services-config.xml files, but did not find anything which might prevents the application from running on IE. The application is using Flash remoting services to talk to Coldfusion and fails with a "Send Failed" message.
    Where could be the error and how can I start tracing it?
    Any advice would be welcome.

    I had this issue with using https and flex. There is a known issue (that microsoft calls a feature) that prevents IE from caching content (flash files) over https.
    If you are using https, try using http to see if it makes a difference. To get it working you need to set some headers in the response.
    Thanks,
    Vackar

  • Is anyone else having trouble with their iweb website and the Internet Explorer 10 browser?  Mine is not loading properly

    I've tested Google Chrome, Safari and Firefox - everything looks great until I get to IE 10 - after uninstalling and going back to IE9 I'm good to go - but concerned about my client base using IE10 and not being able to visit my website.  Has anyone found a solution?

    Why find a solution for a problem that does not exist.
    If your webpages display properly in modern browsers, then clearly it's an MSIE problem. As usual.
    Identify what does not display properly and then make some adjustments to please all browsers.
    And if your client base primarily uses Windows, why not use a PC to create webpages.
    Or don't use iWeb and learn to code yourself. Which is always a good idea, with or without iWeb.
    There are tons of topics on the internet about MSIE exceptions.
    And remember, Windows users have choice too.

  • Internet Explorer web browser app for iphone 4?

    Is there an IE web browser app or one that mimics EI?

    Julian Wright wrote:
    I wanted something that was more like a regular browser.
    You're not going to get something more like a desktop browser (if that's what you mean by regular) on any device with a 3.5 inch screen.
    Safari seems limited.
    In what way? Safari is almost universally regarded as being the best mobile browser on any device. It's support for web standards, and its rendering engine are far better than what you are used to in IE.
    Exactly what do you feel is missing?
    Are you referring to Safari's HTML rendering engine (it's ability to display websites accurately), or features of the browser itself?
    Well I guess I was expecting too much for a phone browser. But thanks for the info on Safari.

  • If I click on a google search link and return with the back arrow on the browser it takes me to the top of the page and not the link I just opened unlike Internet explorer

    I run a search on google.com and click on a link that comes up near the bottom of the page, After I read it and then use the back arrow (pointing left) to return to the searches it takes me to the top of the page to the first link google found rather than the link I just looked at. This does not happen with other web pages using firefox or Internet Explorer's Browser (using google).

    Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
    * Preferences that have been modified are shown as '''bold (user set)'''.
    * Preferences can be '''Reset to the default''' or changed via the right-click context menu.
    -> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
    * Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
    * Change value from 0 to whatever you want over 0 (Default value is 50)
    * click OK
    -> Close the '''about:config''' tab and then Restart Firefox.
    See this post:
    * https://support.mozilla.com/en-US/questions/860894#answer-229574
    Check and tell if its working.

  • Is there vi that can close Windows 7 Internet Explorer?

    Greetings,
    I develop LabVIEW executables for internal use. We have a very loose IT policy. When our techs are running my LabVIEW programs, I want Windows 7 Internet Explorer disabled, or closed when the LabVIEW executable is running. I am thinking that there must be a way to have LabVIEW look for any open Internet Explorer Windows, and close them every 10 seconds or so. Any ideas of how to accomplish this?
    Thanks, Alan

    Puneet K wrote:
    You can use Web Browser ActiveX object to stop IE browser during your application running.
    http://msdn.microsoft.com/en-us/library/aa752085(v=vs.85).aspx
    This will not stop an Internet Explorer that's been launched by the user. It only applies to an embedded IE ActiveX control.
    Stop IE Browser Windows  Service.
    What IE Browser Windows service? There is no such thing.
    To OP: You can:
    Use System Exec to kill any currently running iexplore.exe processes using the kill command. Or you could just blindly send this periodically.
    You could use the Windows API Function Utilities (32-bit) for LabVIEW to check if an Internet Explorer window is open (though this may not be robust since it depends on the window name) and then close that window.
    You could uninstall IE.
    Of course, this won't stop somebody from using Firefox, or using an app-on-a-stick approach by putting a browser like Firefox or Chrome on a USB stick.
    Usually in these cases education goes farther than you trying to prevent somebody from running something like a web browser.

  • .swf won't open in internet explorer

    Hi,
    This is driving me mental, flash seems to hate me! created a webpage in dreamweaver and then dropped .swf videos onto it. One video though was originally a .mov which i encoded to f4v in media encoder and then exported as a .swf from flash. It worked fine on my computer and now that it's uploaded it refuses to play. Also it won't preview on my computer anymore! Please help.
    This is the page it's supposed to play on www.dpdigitalmedia.co.uk/portfolio.html
    Affroken

    If you're having trouble installing Adobe Flash Player, try downloading the installer directly from the following link:
    Flash Player for ActiveX (Internet Explorer)
    Save it, close your browser and run it.

Maybe you are looking for

  • Schedule Background Job :  Remove delivery Block in Sales order

    Hi Gurus, I have a requirement to select all sales orders as per a condition and remove delivery block at VA02-> Go to -> Header -> Status For that I have to write a program which will be run only in background and i have to schedule background job f

  • Cheque Print

    Dear All, Please resolve my issue. Senario: Business want to print cheque for advances payments, T-code: F-48 vendor advance payment. FBZ5 cheque is created for the same. Here system not allowing to print the cheque. Message: You cannot print the man

  • Data Source in Java

    we can connect simple application with database(no server) using Driver Manager class. can we use Data Source to connect simple application(standalone) with data base? please guide me thanks in advance

  • Is there a way I can enter a website name w/o the www being prefixed? in English

    I need to access a certain site that don't use the www prefix.

  • Multiple JSPs with JSR 168-compliant Java portlet

    Hi, I have an application with multiple JSPs that I'm trying to run in a portlet. Looks like a JSR 168 Java Portlet is the best way to do that. I want to avoid using proprietary PDK Portlet route. A few questions: 1. Is there any sample of that avail