Lumia 521 battery indicator after a turn off

hi
i got a nokia lumia 521 a month ago , today i was with costumer support " t-mobile" and they asked me to turn of the phone pull the battery and take the sim card out , so i did , then they asked me to put everything back and turn it on so i did. but..... the phone didnt come up , by hitting / holding the power button , so i thought maybe my battery was very low when i turned it off , so i plugged my usb charger to the phone , now the phone does the following
when i plug the usb to the phone , the phone vibrates then goes to NOKIA then straight to the battery indicator with little red and a flashing on/off charging indicator , when i unplug the usb cable the phone turn off.
is there a trick to fix that ?
thanks

STEAMER123 wrote:
Found the problem(S)
Like people on the other website, the issue is the copper piece on the batteryis not contacting with the phone. That's why the battery icon shows only when its plugged in and nothing at all when its not plugged in. All the complaints I read on the internet has just one problem. It just happens I got two on this phone.........
1) I had to use a tiny needle to bend the copper piece out to ensure its making contact with the phone
2) after I bent the copper piece, the battery is still not contacting right, (you can't really tell by looking at it, I was just trying everything people were saying on the web. I spent hours on it and I got it !!!) I had to cut a business card to slide it underneath the battery. (2 business card thick). If u have same problem, u should try one card thick first.
Now the back cover feels like its swelling cuz of the business cards, but comparing to a $600+ phone, this $99 phone I can do everything I need it to, I can deal with that. Just wish I could have found the problem(s) sooner.
Hope this will help people with the same problem
Hey, this really helps, after looking for arkane solutions, I just add a piece of bend paper under the batery and it works... notice something,, the batery used to hace a plastic strip por pulling out.. this plastic strip got unglued so i removed, i see this plastic strip thinkness is needed for the wire copper piece to make contact... terrible design.
thanks for the advice.

Similar Messages

Battery Indicator - won't turn off!!!

Basically, my iPod won't/can't turn off. The little battery in the top right always has a little lightening bolt or plug in it, no matter if the iPod is plugged in or not. The obvious effect is that the battery runs down when I'm not "using" my iPod. I've restored, reset, updated, installed 1.1, uninstalled 1.1 and reinstalled 1.0, etc. I haven't seen anything about this on the site or elsewhere. I'm hoping there's a solution where I don't have to sent my iPod away but it's appearing less and less likely...Please help!

Anyone know anything about this?
Several people have had this problem in the last few days. I don't recall any of those cases being solved.
Nevertheless, try a reset, which is the equivalent of a reboot and won't affect your data. I don't think it'll work, but you lose nothing and it's non-risky.
Reset your iPod.
1) Slide the lock button to ON.
2) Slide the lock button to OFF.
3) Press 'menu' and 'centre' button together for several seconds.
4) Follow the instructions.

Lumia 1020 focus assist light wont turn off

lumia 1020 focus assist light wont turn off. i've done a hard reset and a soft reset. ive also drained the battery but the little round light continues to be turned on .
i checked and it looks like ive still got warranty from nokia. will they still honour the warranty if ive updates the software?

I have the same problem, I tested everything, hard reset, soft reset, using recovery tool to back to Cyan version, still the light is ON.. what is tyhe problem, it is ridicolous that Microsoft/ Nokia do not give an answer to this problem as many users have the same problem........
tiny_chef wrote:
Hi, alekswithkz. Just to verify, when you say hard reset, do you mean: Settings>About>Reset? If yes, you can try to download and use the Nokia Software Recovery Tool before considering sending the phone for repair.
http://www.nokia.com/us-en/support/software-recovery/
Note: The link is from Nokia US. If you are in another country, feel free to download the app from your local Nokia website.
If the issue remains, it's best to have it examined by an authorized Nokia technician. This will also determine if the repair will be covered under warranty. Warranty period starts on the date of purchase. Please bring your receipt for warranty verification.

Hello! I have my iPhone 5 since two weeks ago. I've neve had a problem. Today it was charged of battery but suddenly it turned off. I've try to turn on but I can't. Anybody knows what ca I do?

Hello! I have my iPhone 5 since two weeks ago. I've neve had a problem. Today it was charged of battery but suddenly it turned off. I've try to turn on but I can't. Anybody knows what ca I do?

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

Lost applications after PDA turn off

Hello everyone.
I’m developing an application for TPC-2006 with LV8 and PDA 8 module. I have deployed the application into the device and works fine, however after a turn off the application is deleted from the device. Anyone knows how can I store the application in a non-volatile memory zone? The TPC-2006 has no memory card.
Thanks

The TPC 2006 has, according to its data sheet, 64 MB SDRAM, 64 MB flash memory onboard, and a CompactFlash memory expansion slot. To me, means that it should behave like other PDAs. I thought I had a similar problem during the first hour of utilisation of my iPaq... until I discovered that the files where saved in the Document folder, while I was searching the Application folder... .
This being said, the TPC 2006 is a National Instrument product and you should obtain a better help from NI engineers !
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

27Xi stays on displaying "no source signal" after I turn off my PC or PS4, doesn't enter sleep mode.

I started having this issue a few weeks ago. The monitor no longer enters sleep mode for whatever reason after I turn off my devices connected to it (currently my PC via DVI and my PS4 via HDMI), it turns on and displays a box with "no source signal" and never goes to sleep. Before it displayed a box with "monitor going to sleep" for a few seconds and the panel turned off as the montor entered sleep mode. This is extremely annoying. How do I fix it? What's wrong with it? I already tried a factory reset.

Hello, try this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Now wifi will not turn back on automatically in the morning after being turned off all night. Use to be ok before now. Is it the new update 7.1? Help

Wifi will not turn back on in the morning after being turned off all night, it use to work for years. Is it the new 7.1 ?

Yes that what I mean, after the phone has been turned off all night, when I turn it back on the morning the wifi will not turn on by itself. Eventually by turning off and on the main phone switch and the wifi in settings it sometimes come back on! Then I'm ok for the rest of the day even when I leave the house and come back it's ok. Only first thing in the morning, strange that it doesn't wake up like it use too.
Thank you

I have an iphone 3gs the old battery was useless so i replaced it with a new battery but it wont hold a charge now it used to charge to old battery but would just turned off if disconnected to its not the dock connecter any advice

i have an iphone 3gs the old battery was useless so i replaced it with a new battery but it wont hold a charge now it used to charge to old battery but would just turned off if disconnected to its not the dock connecter any advice

Advice:
1. Learn to use punctuation and sentence structure - your post makes little sense.
2. I'm getting the idea you now want to use your old "useless" battery. Why, if it's useless?

Battery percentage indicator doesn't turn off

Hello i have an iphone 4s with the latest upgrade (7.1.2) and i discovered that it simply doesn't turn off the battery indicator level, even disabling it at general settings at all.
I have recently received an new iphone from apple care and when i get my hands to it, in "new iphone" mode, it comes disabled by default.
But when i dit the restore backup via itunes this thing doesnt turn off.
Sorry bad english, im brazilian.
Thank you

Hey Rafacandido,
Thanks for the question. Let’s see if we can isolate the issue further. To do so, try restarting/resetting your device:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue persists after a restart, let's try a reset of your settings as outlined below:
Reset iPhone settings - iPhone
http://help.apple.com/iphone/7/#/iph7a2a9399b
Reset iPhone settings. Go to Settings > General > Reset, then choose an option:
Reset All Settings: All your preferences and settings are reset.
And finally, if the issue persists you can try a back up and restore as new:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
Thanks,
Matt M.

L305D-S5935 Unresponsive After Display Turns Off

I have a L305D-S5935 running Windows Vista and it becomes unresponsive after the display turns off as set to do so in the power settings. I cannot push any key or button or move around on the mouse pad to get it to turn back on. This is very frustrating and the only way to get it to come back on is to to a hard restart.

Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections.
Then reinstall TVAP.
Toshiba Value Added Package for Windows Vista/7 (32)(v1.2.33; 11-09-2009; 43.67M)
- Peter

FIX for battery draining quickly. Turn off push for FACEBOOK

I thought my iphone battery must be getting old, as my battery would only last half a day despite less than 1 hr of usage. But after some investigation in the preferences, I turned off Facebook push and back to half battery after a whole day outside making numerous calls and light web surfing, wireless, network on 3G with location services on. Hope this helps others from going crazy!

The 3G option. WHEN that option is off, iphone is connected to your operators 2g network! Because 3G has often weaker signals then 2G
Good luck!

My iphone 4s lose signal and only say serching to fix it i need to restore , this happen whe i dont have more battery and the iphone turn off

my iphone 4s lose signal and only say serching to fix it i need to restore , this happen whe i dont have more battery and the iphone turn off

Is the battery drained after it shuts itself off?
Did you already try to set it up as new device?
How to back up your data and set up as a new device

Battery suddenly empty - phone turns off

I have a compact z3 and when the battery reaches around 60% the phone suddenly turns off. I suspected it was a software fault but after I have tried repairing it with Macbridge update from scratch the same thing happens. Any help, tips, advice appreciated. Brian

Get your phone inspected by your local Xperia Care http://support.sonymobile.com/global-en/contactUs/

Zen Mirco Formated and fully charged STILL goes flat after being turned off all nigh

This is starting to annoy me now, I formated the unit and then allowed it to be fully charged, now in the morning when I awoke after leaving it off all night it was completely flat again. So this rules out corrupt files in the library.
And from all the other things I have done I have ruled everything else out, so come on creative!
Whats going on?

It's strange that the Zen Micro does it but the Zen Touch doesn't. It could be because of the massi've battery life in the Zen Touch but I charged my Zen Touch up completely about 2 days ago and turned it on today and it's still showing 3 bars. I really hope they remedy this problem because it's a bit annoying taking it with me in the morning only to have the battery die later that day.

No sund after a turn off because low bat

Hi its me again.... T.T
This is the second time with this issue, my lap was with a low bat and I didn't see, so it turned off (like all the normal laptps) and then i turned on and the audio is missed, i instaled the audio controler and nothing happened, what's going on? the first time i dont know how i fixed it, but i did a super mess with all the drivers. please help again...
info:
Windows Vista HomePremium 64x (i hate it, i have a lot of issues because the vista u_u)
Satellite A505-SP6996R this is a latinamerican model or sort of, so Jerry told me that i can use the drivers for this model
Satellite A505-S6973
Thnks guys

STEAMER123 wrote:
Found the problem(S)
Like people on the other website, the issue is the copper piece on the batteryis not contacting with the phone. That's why the battery icon shows only when its plugged in and nothing at all when its not plugged in. All the complaints I read on the internet has just one problem. It just happens I got two on this phone.........
1) I had to use a tiny needle to bend the copper piece out to ensure its making contact with the phone
2) after I bent the copper piece, the battery is still not contacting right, (you can't really tell by looking at it, I was just trying everything people were saying on the web. I spent hours on it and I got it !!!) I had to cut a business card to slide it underneath the battery. (2 business card thick). If u have same problem, u should try one card thick first.
Now the back cover feels like its swelling cuz of the business cards, but comparing to a $600+ phone, this $99 phone I can do everything I need it to, I can deal with that. Just wish I could have found the problem(s) sooner.
Hope this will help people with the same problem
Hey, this really helps, after looking for arkane solutions, I just add a piece of bend paper under the batery and it works... notice something,, the batery used to hace a plastic strip por pulling out.. this plastic strip got unglued so i removed, i see this plastic strip thinkness is needed for the wire copper piece to make contact... terrible design.
thanks for the advice.

Lumia 521 battery indicator after a turn off

Similar Messages

Maybe you are looking for