Lumia 610 .:.:CANNOT TURN ON FB CHAT / CANNOT LOGI...
As the subject says , my lumia 610 won't turn ON the facebook chat from the "messaging" tab . It keeps reporting 80070490 error and nothing happens . Also , when i try to log-in to windows-live hotmail it says "Oops,something went wrong" . Please help . The mobile is connected to the internet i can browse through everything else .
Hi HumanDestroyer,
I understand where you're coming from, but let's try isolating the issue. Did something happen to your Lumia 610 prior to this? Have you tried pressing and holding both the volume down and the power keys for 15 seconds? It should reboot. If that doesn't help, you can also consider resetting the phone by following the below steps:
Make sure the charger is disconnected.
While the phone is off, press and hold the volume down and camera keys.
Press and hold the power key.
When the phone vibrates, release the power key, but continue holding the volume down and camera keys, until the phone reboots.
Warning: This erases all personal content on your phone and restores the factory settings.
If the above troubleshooting steps fail, we suggest sending the phone to our facility for an assessment. See: Nokia Local Support to know the nearest Nokia Care Points within your area. To know warranty coverage, you can check: NOKIA MANUFACTURER’S LIMITED WARRANTY FOR NOKIA WITH WINDOWS PHONE.
Note: Everything will be deleted once the phone is sent for repair.
Hope this helps. By the way, congratulations on your first post.
Similar Messages
-
Battery back up issue with lumia 610
i have been using nokia lumia 610 ..past one month
battery back up was average(15 to 20 hrs) ,but reduced after some time i got it check with nokia care they said there is no problem with phone and battery
thing is that
when i use phone for surfing withing 5 minutes battery reduced to 95 per form 100
when i use chat app it reduce to 85 per within 5 to 7 minutes
nokia care people say that there is no problem with handset
when i ask that this is nomal than they say it should last a day under following type of usage
30 min of browsing
30 min of calling
1 hour of music
30 min of video playing
1 hour of instant messaging
but phone last total 7 to 8 hours and i am not finding any kind of solution regarding this problem
please help and i expect this time that any of the nokia associate answer my problem1.
Yes there is a bluetooth problem. I can received the same file from my other phone but cannot with laptop.
It works with phones.
2.
Battery backup is okay for me. Don't run too many apps and leave them in background. Close them by long pressing menu key and selecting X.
3.
For backup memory card is needed.
As we go for software update or reinstall all data gets deleted. So it needs removable memory card.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.---------------------------- -
Video download in Nokia lumia 610
How to download video in Nokia lumia 610 ????
Hi lumiakdb,
Thank you for your post and welcome to Nokia Support Discussions!
You cannot download video files on Nokia Lumia 610, but you can, however, stream supported videos by opening them in the browser. If you want to get a video file on your device, you'll need to transfer it using Zune or Windows Phone 7 Connector for Mac (can be downloaded on AppStore). Please see here for instructions on how to synchronise content using Zune.
Hope this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
Bluetooth Transfer in Lumia 610
I recently bought a lumia 610 and immidiately installed the blutooth transfer application. I have only managed to transfer one file to a Nokia phone. Whenever I want to receive files from other phones, the phones will be picked but a message 'cant connect' immidiately comes out. Please kindly assist with info as to how I could make it work
WP8 uses "sandboxing" for enhanced security, i.e. each app can access only the files connected with itself, so a general file manager cannot work in such an OS.
You would be better off transferring the video via PC to ensure it goes into the correct media folder for it to be recognised by the player. -
Hi!why can't download Skype for Nokia lumia 610?what was the best thing i should do?
Skype is not working with the Lumia 610 because the phone has only 256 mb RAM.http://en.wikipedia.org/wiki/Nokia_Lumia_610On nearly every other current WP7.5-device, it is working.The Skype-team has to develop a new version with less memory-usage. If you cannot return the phone, try the Tango-app, which allows to make video-calls, even on the Lumia 610. You can use it cross-plattform, even on PC:http://www.tango.me/
-
Cannot log out of iChat / Bonjour
Hi -- this is a rather strange problem: I use iChat to chat with other people through Bonjour. I have a status icon in my menu bar. I noticed recently that I was unable to sign out of Bonjour. I would disconnect through iChat and quit the application, but the status icon in the menu/status bar would still show all my nearby bonjour buddies and wouldn't let me sign off. This was a problem because people would IM me when I didn't want them to, and the only way to prevent it was to turn off my internet connection.
Foolishly, in an effort to eliminate this distraction for the time being I deleted iChat thinking that I could download it again for free from the apple website. Now I still am visible by bonjour buddies but when they try to chat me I get an error message saying that iChat needs my attention. I cannot log off through the status bar and I can still see other bonjour buddies.
1. Is there any way I can reinstall iChat free of charge?
2. How do I "log off" of bonjour chat?Hi,
Welcome to the Discussions
1) http://discussions.apple.com/thread.jspa?threadID=1486891
Do the Easy Way and the COMBO Update listed nearer the bottom.
2) Go to the iChat Menu > Accounts and Log Off the Bonjour entry.
B) Go to the iChat Menu > Preferences > Accounts and Disable the Bonjour one.
8:30 PM Saturday; May 22, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Anti Virus for Nokia Lumia 610
Hello
can anyone provide me the link for dowloading the antivirus for Nokia lumia 610 i wont mind if its paid
ThanksThe Lumia 610 (along with all other current WIndows Phones) cannot catch a virus so no anti virus software is needed.
-
Cannot log into AD on Mountain Lion. Please help! I got the logs
My company has been experiencing this problem ever since Mountain Lion released.
The problem is, we cannot log into AD on all of our MAC who currently runs Mountain Lion. We, however, can log into AD fine with Lion and Snow Leopard just fine. We only use AD, we don't use Open Directory or have any Apple server.
I have gather some logs using the SSH. Please help me view the logs and let me know what's going on if possible.
Here are the steps that I performed before capture these logs.
I format the hard drive and installed a new OS X 10.8.2 on the hard drive using the Recovery Mode (Hold down option Key while boot).
I created a new computer name call ittest-mac3 in AD and assigned to proper OU. I changed the computer name under System Preferences ==> Sharing to "ittest-mac3".
3. I bind this Macbook Pro to our Active Directory via xyz.com. The bind was successful. I enabled "Create mobile account at login", "Required confirmation before creating a mobile account", " Force local home directory on start up disk", " Use UNC path from active directory to derive network home location", "Default user shell: /bin/bash/. Network protocol to be used: smb:
After I reboot the Mac client, I was unable to log into it using our regular AD user account (consider all of our employees has regular account).
I created 2 test accounts for Mac on Active Directory, they are "mac test" and "mac test 2".
With "mac test" account, I configured everything the same as our regular account in AD. Which I was not able to log into the Mac client using this account.
With “mac test 2” account, I configured everything the same as our regular account in AD EXCEPT for UNIX Attributes. I was successfully logged into the Mac client using this user account.
So the problem is ... set the Unix Attributes for NIS domain on the AD account prevent everyone of us in our company to log into AD on any client that have Mountain Lion OSX installed.
Here are the logs:
Log1. This logs showed successful when log into AD on a Mountain Lion OSX using an AD account that don't have UNIX attributes setting configure.
login as: administrator
Using keyboard-interactive authentication.
Password:
Last login: Mon Dec 17 08:43:38 2012
ittest-mac3:~ administrator$ sudo su -
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
ittest-mac3:~ root# cd /var/log
ittest-mac3:log root# tail -f system.log
Dec 17 09:02:19 ittest-mac3.local SecurityAgent[650]: *** WARNING: -[NSImage com
positeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Pleas
e use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:02:50 ittest-mac3.local sshd[659]: Accepted keyboard-interactive/pam f
or administrator from 10.10.202.63 port 50738 ssh2
Dec 17 09:02:50 ittest-mac3.local sshd[659]: USER_PROCESS: 665 ttys000
Dec 17 09:04:59 ittest-mac3.local sudo[673]: administrator : TTY=ttys000 ; PWD=/
Users/administrator ; USER=root ; COMMAND=/usr/bin/su -
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_authenticate(): authenticat
ion succeeded
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_acct_mgmt(): The group chec
k succeeded.
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_acct_mgmt(): OpenDirectory
- Membership cache TTL set to 1800.
Dec 17 09:04:59 ittest-mac3.local su[674]: in od_record_check_pwpolicy(): retval
: 0
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_open_session(): No session
type specified.
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_open_session(): Going to sw
itch to (root) 0's Background session
Dec 17 09:07:19 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'config.modify.com.apple.familycontrols.override' by client
'/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] for authorization created by
'/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] (3,0)
Dec 17 09:07:19 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'config.modify.com.apple.familycontrols.loginwindow.override' by
client '/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resource s/parentalcontrolsd' [679] for authorization created by
'/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] (3,0)
Dec 17 09:07:19 ittest-mac3.local SecurityAgent[650]: User info context values set for mtest2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got user: mtest2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got ruser: (null)
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got service: authorization
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Context initialised
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Stashing kcm credentials in enviroment for kcminit: [email protected]
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in od_record_check_pwpolicy(): retval: 0
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in od_record_attribute_create_cfstring(): returned 2 attributes for
dsAttrTypeStandard:AuthenticationAuthority
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Establishing credentials
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got user: mtest2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Context initialised
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got euid, egid: 0 0
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done getpwnam()
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done setegid() & seteuid()
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: init credential cache
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: storing credential for: [email protected]
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got cache_name: API:164370296:1
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Environment done: KRB5CCNAME=164370296:1
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Cache closed
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup3
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done seteuid() & setegid()
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup4
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: ntlm
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in ac_complete(): ac_complete returned: 0 for 164370296
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: ntlm done, used domain: PROS1
Dec 17 09:07:19 ittest-mac3.local SecurityAgent[650]: Login Window login proceeding
Dec 17 09:07:19 ittest-mac3.local ManagedClient[644]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentialsWithRecordType:"dsRecTypeStandard:Users"
authenticationType:kDSStdAuthNodeNativeRetainCredential authenticationItems:["mtest2", password]]) == 2100 (Connection failed to the directory server.) [This
error is ignored and is only being flagged for notification]
Dec 17 09:07:20 ittest-mac3 kernel[0]: Sandbox: kcm(681) deny mach-lookup com.apple.networkd
Dec 17 09:07:20 ittest-mac3.local MCXCompositor[690]: CFPreferences: user home directory for user kCFPreferencesCurrentUser at is unavailable. User domains
will be volatile.
Dec 17 09:07:20 ittest-mac3.local UserNotificationCenter[696]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It
should not be used in new applications. Use convertRectToBacking: instead.
Dec 17 09:07:24 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/CoreServices/ManagedClient.app' [644] for authorization created by '/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:24 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
'/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:24 ittest-mac3.local ManagedClient[644]: ODUMakeMobileMCXRecord: updating record from kDSNAttrOriginalHomeDirectory =
<home_dir><url>smb://pros-fsvr2/home/mtest2</url><path>/</path></home_dir>
Dec 17 09:07:24 ittest-mac3.local ManagedClient[644]: ODUMakeMobileMCXRecord: updating record to kDSNAttrOriginalHomeDirectory =
<home_dir><url>smb://pros-fsvr2/home/</url><path>mtest2/</path></home_dir>
Dec 17 09:07:25 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
'/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:26 --- last message repeated 1 time ---
Dec 17 09:07:26 ittest-mac3 com.apple.launchd[1] (com.apple.launchd.peruser.164370296): Throttling respawn: Will start in 4 seconds
Dec 17 09:07:26 ittest-mac3.local writeconfig[697]: Unable to talk to lsboxd
Dec 17 09:07:26 ittest-mac3.local writeconfig[697]: SFL(697): AddNewItemWithProperties_rpc returned 5
Dec 17 09:07:26 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
'/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:30 ittest-mac3.local distnoted[721]: # distnote server agent absolute time: 3817.482079135 civil time: Mon Dec 17 09:07:30 2012 pid: 721
uid: 164370296 root: no
Dec 17 09:07:30 ittest-mac3.local distnoted[721]: Bug: 12C60: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
Dec 17 09:07:30 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.login.console' by client
'/System/Library/CoreServices/loginwindow.app' [641] for authorization created by '/System/Library/CoreServices/loginwindow.app' [641] (100003,0)
Dec 17 09:07:30 ittest-mac3.local loginwindow[641]: Login Window - Returned from Security Agent
Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort,
err: 1102
Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: USER_PROCESS: 641 console
Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.gamed): Ignored this key: UserName
Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.gamed): Ignored this key: GroupName
Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find:
com.apple.ReportCrash.Self
Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: Connection with distnoted server was invalidated
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/System/Library/CoreServices/UserAccountUpdater' [727] for authorization created by '/System/Library/CoreServices/UserAccountUpdater' [727] (2,0)
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/usr/libexec/launchdadd' [730] for authorization created by '/System/Library/CoreServices/UserAccountUpdater' [727] (100002,0)
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Session 100015 created
Dec 17 09:07:31 ittest-mac3.local MRT[731]: MRT finished scan. Malware files were not found.
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/usr/libexec/MRT' [731] for authorization created by '/usr/libexec/MRT' [731] (2,0)
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/usr/libexec/launchdadd' [730] for authorization created by '/usr/libexec/MRT' [731] (100002,0)
Dec 17 09:07:31 --- last message repeated 1 time ---
Dec 17 09:07:31 ittest-mac3.local blued[68]: kBTXPCUpdateUserPreferences gConsoleUserUID = 164370296
Dec 17 09:07:31 ittest-mac3.local locationd[738]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this
compatiblity mapping behavior in the near future.
Dec 17 09:07:31 ittest-mac3.local locationd[738]: NOTICE,Location icon should now be in state 0
Dec 17 09:07:31 ittest-mac3.local UserEventAgent[725]: cannot find fw daemon port 1102
Dec 17 09:07:34 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.login.done' by client
'/System/Library/CoreServices/loginwindow.app' [641] for authorization created by '/System/Library/CoreServices/loginwindow.app' [641] (100002,0)
Dec 17 09:07:36 ittest-mac3.local CalendarAgent[753]: Could not find Meta Data for persistent Store
Dec 17 09:07:37 ittest-mac3.local WindowServer[76]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:07:37 ittest-mac3.local WindowServer[76]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:07:37 ittest-mac3.local genatsdb[764]: ########## genatsdb Sandboxed. ##########
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: CGSCopyWindowShape: pid (763) passed NULL window
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: could not update menu bar region, 1000
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: CGSSetWindowTransformAtPlacement: Singular matrix [0.000 0.000 0.000 0.000]
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: *** WARNING: Method convertRectToBase: in class NSView is deprecated on 10.7 and later. It should not
be used in new applications.
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: *** WARNING: Method convertRectFromBase: in class NSView is deprecated on 10.7 and later. It should
not be used in new applications.
Dec 17 09:07:38 ittest-mac3.local SystemUIServer[763]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:07:38 ittest-mac3.local SystemUIServer[763]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:07:39 ittest-mac3.local genatsdb[764]: *GENATSDB* FontObjects generated = 392
Dec 17 09:07:53 ittest-mac3 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Dec 17 09:07:53 ittest-mac3 kernel[0]: macx_swapoff SUCCESS
Dec 17 09:07:59 ittest-mac3.local Setup Assistant[751]: INFO: MMAccountMgr_Private: finishedSetup called.
Dec 17 09:07:59 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 39931
Dec 17 09:07:59 --- last message repeated 4 times ---
Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.afpstat-qfa[793]): Job failed to exec(3). Setting up event to tell us when to
try again: 2: No such file or directory
Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.afpstat-qfa[793]): Job failed to exec(3) for weird reason: 2
Dec 17 09:07:59 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 39931
Dec 17 09:07:59 --- last message repeated 4 times ---
Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mrt.uiagent[783]): Exited with code: 255
Dec 17 09:07:59 ittest-mac3.local NetworkBrowserAgent[796]: Starting NetworkBrowserAgent
Dec 17 09:07:59 ittest-mac3.local imagent[786]: [Warning] Setting up a new messages database.
Dec 17 09:07:59 ittest-mac3.local Finder[775]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be
used in new applications. Use convertRectToBacking: instead.
Dec 17 09:07:59 ittest-mac3.local Finder[775]: *** WARNING: Method userSpaceScaleFactor in class NSView is deprecated on 10.7 and later. It should not be
used in new applications. Use convertRectToBacking: instead.
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: dict count after removing entry for window 0xfe is 0
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=243
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Could not terminate job: 3: No
such process
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Using fallback option to
terminate job...
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] ([0x0-0x44044].com.apple.AppleSpell[767]): Exited: Terminated: 15
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.quicklook[803]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification
kLSNotifyApplicationDeath to notificationID=272
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[813]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: DEAD_PROCESS: 641 console
Dec 17 09:09:09 ittest-mac3.local migCacheCleanup[736]: Cache cleanup: cleanup for user 164370296 took 0.07 seconds
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=260
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXRestartSessionWorkspace: session workspace exited for session 257 (on console)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (0 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: loginwindow connection closed; closing server.
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: CGSFlushWindowContentRegion: Invalid connection
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSGetNextEventRecord (Inline) connection 0x201b, 16384 bytes
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=15883 Died
Dec 17 09:09:09 ittest-mac3.local loginwindow[826]: Login Window Application Started
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Server is starting up
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: init_page_flip: page flip mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: mux_initialize: Mode is dynamic
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor enabled for tile size [256 x 256]
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXGLInitMipMap: mip map mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: WSMachineUsesNewStyleMirroring: true
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x4 for display 0x042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x5 for display 0x003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x6 for display 0x003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x7 for display 0x003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXPerformInitialDisplayConfiguration
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; Alias(4, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions
13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 2
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXMuxBoot: Boot normal
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x0000494b, unit 0, caps QEX|
QGL|MIPMAP, vram 1024 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004833, unit 4, caps QEX|
QGL|MIPMAP, vram 580 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Created shield window 0x8 for display 0x042803c0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:10 ittest-mac3.local launchctl[829]: com.apple.findmymacmessenger: Already loaded
Dec 17 09:09:10 ittest-mac3.local com.apple.SecurityServer[15]: Session 100018 created
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320
isBackBuffered: 1 numComp: 3 numDisp: 3
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
-[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: dict count after removing entry for window 0xfe is 0
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=243
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Could not terminate job: 3: No
such process
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Using fallback option to
terminate job...
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] ([0x0-0x44044].com.apple.AppleSpell[767]): Exited: Terminated: 15
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.quicklook[803]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification
kLSNotifyApplicationDeath to notificationID=272
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[813]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: DEAD_PROCESS: 641 console
Dec 17 09:09:09 ittest-mac3.local migCacheCleanup[736]: Cache cleanup: cleanup for user 164370296 took 0.07 seconds
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=260
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXRestartSessionWorkspace: session workspace exited for session 257 (on console)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (0 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: loginwindow connection closed; closing server.
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: CGSFlushWindowContentRegion: Invalid connection
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSGetNextEventRecord (Inline) connection 0x201b, 16384 bytes
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=15883 Died
Dec 17 09:09:09 ittest-mac3.local loginwindow[826]: Login Window Application Started
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Server is starting up
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: init_page_flip: page flip mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: mux_initialize: Mode is dynamic
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor enabled for tile size [256 x 256]
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXGLInitMipMap: mip map mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: WSMachineUsesNewStyleMirroring: true
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x4 for display 0x042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x5 for display 0x003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x6 for display 0x003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x7 for display 0x003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXPerformInitialDisplayConfiguration
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; Alias(4, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions
13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 2
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXMuxBoot: Boot normal
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x0000494b, unit 0, caps QEX|
QGL|MIPMAP, vram 1024 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004833, unit 4, caps QEX|
QGL|MIPMAP, vram 580 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Created shield window 0x8 for display 0x042803c0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:10 ittest-mac3.local launchctl[829]: com.apple.findmymacmessenger: Already loaded
Dec 17 09:09:10 ittest-mac3.local com.apple.SecurityServer[15]: Session 100018 created
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320
isBackBuffered: 1 numComp: 3 numDisp: 3
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
-[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Log2: This log showed was captured when we logged into a test account that have Unix Attributes configure just like our regular user's account.
^C
ittest-mac3:log root# tail -f system.log
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320
isBackBuffered: 1 numComp: 3 numDisp: 3
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
-[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:41 --- last message repeated 1 time ---
Dec 17 09:10:13 ittest-mac3.local SecurityAgent[836]: User info context values set for tle
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got user: mtest
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got ruser: (null)
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got service: authorization
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Context initialised
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Stashing kcm credentials in enviroment for kcminit: [email protected]
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in od_record_check_pwpolicy(): retval: 0
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in od_record_attribute_create_cfstring(): returned 2 attributes for
dsAttrTypeStandard:AuthenticationAuthority
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Establishing credentials
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got user: mtest
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Context initialised
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got euid, egid: 0 0
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done getpwnam()
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done setegid() & seteuid()
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: init credential cache
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: storing credential for: [email protected]
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got cache_name: API:2137600189:2
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Environment done: KRB5CCNAME=2137600189:2
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Cache closed
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup2
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup3
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done seteuid() & setegid()
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup4
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: ntlm
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in ac_complete(): ac_complete returned: 0 for 2137600189
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: ntlm done, used domain: PROS1
Dec 17 09:10:13 ittest-mac3.local SecurityAgent[836]: Login Window login proceeding
Dec 17 09:10:13 ittest-mac3.local ManagedClient[830]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentialsWithRecordType:"dsRecTypeStandard:Users"
authenticationType:kDSStdAuthNodeNativeRetainCredential authenticationItems:["mtest", password]]) == 2100 (Connection failed to the directory server.) [This
error is ignored and is only being flagged for notification]
Dec 17 09:10:13 ittest-mac3 com.apple.launchd[1] (com.apple.launchd.peruser.4294967295[846]): getpwuid("4294967295") failed
Dec 17 09:10:13 ittest-mac3 com.apple.launch-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this? -
SERIOUS BUG - cannot log in Leopard after upgrading to 10.5.7!
Hi all, I upgraded my Macbook Pro to 10.5.7 via Software Update, and after that I cannot log in anymore! The system boots fine, I land on the log in screen. After entering the password, it seems to be logging in, I can see the dashboard and everything, and then it automatically logs out and jumps back to the log in screen!
I searched on Apple Support and found this -> http://support.apple.com/kb/TS1543?viewlocale=en_US, changing the password in single user mode doesn't work either!
Hope you guys know what's going on and give me a hand! I tried to contact Apple Support but they said my AppleCare is expired and won't help!
Thanks guy!Using Software Update can be finnicky!
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.7 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.7 update here: http://support.apple.com/kb/HT3397
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.5 to 10.5.6. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later). -
How do I rename my App Store, iCloud, and iTunes accounts so i can update apps and software? I have closed the original email address i started my App Store, icloud, and iTunes account and cannot log in unders that Apple ID. I have tried going through device and my MacBook Air. Where can i get on-line assistance?
If you mean you are trying to delete your iCloud account in iOS 7 and you don't know the passwod for the old ID, do one of the following:
If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You should then be able to turn off Find My iPhone with your password. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back and change your primary email address and iCloud ID back to the way it was. You will then be able to go to Settings>iCloud and sign in with your current ID and password to reconnect to your iCloud account.
If you don't have access to your old email address, you will have to contact Apple to get them to reset the password for it so you can disable Find My iPhone and sign into your iCloud account. You will have to prove your identity to them in order to do so. You can either contact iTunes support for assistance with this (https://ssl.apple.com/emea/support/itunes/contact.html), or contact Apple Support (http://www.apple.com/support/icloud/contact/). -
Nokia lumia 610 power button problem
Hi,
It has been more than a year since i have been using my nokia lumia 610 but from few days i have been experiencing a problem with my phone . sometimes power button becomes too sensitive and it becomes like a touch button , Also , it turns off by itself And while starting , it reaches upto nokia logo and then vibrate and turns off.
now phone working fine, "this problem started when my phone fall down like 50 cm high to ground".
Please help me, Thank you in advance.Hi wiise9,
Welcome to the forum!
We can't verify yet if the issue is hardware or software related unless confirmed by Nokia authorized technicians. Just keep monitoring the phone's performance. If the issue happens again, best to try the troubleshooting steps shown at this link first further isolate it: Your Windows Phone 8 doesn't work or respond as expected
Let us know if you need further assistance. -
Nokia lumia 610 shutdown problem
Sorry if that's not the right place to create the discussion, but doesn't know where else... Before near 1-2 hours, my phone started shutting down automatically. I'm turned it on and it shutted down again. Before near 5 minutes i resetted it... but i still have that problem.. can someone tell me if there is a solution?
Hi privateme,
Welcome to the forum!
Did something happen to your Lumia 610 before this issue came up? To clarify, the phone completely turns off and not just a regular screen time-out, is that right? You mentioned that you reset the phone after the issue happened. Is it the one under Settings > About?
Is your phone already running the latest software version? If yes, you may try to restore the previous software version. Check this link for the procedure: Restoring a backup to your phone - WP7.5. After that, monitor the Lumia 610 and see if the issue will continue to happen.
Let us know if this information helped you. -
I have restored from time machine and tried every method of restarting nothing lets me sign in the computer imputs about 20 characters, I have scanned for virus, negative I have restored from time machine, can't download new 10X as I cannot log in to get it. Any ideas?
Hey I managed to figure this out about an hour before I got your response, wow a two year old keyboard and it's toast. I have a Kensington keyboard I use with my Ipad so hooked that up, tried wirelessly, the went with a usb cord. This has been the strangest 24 hours ever on my mac. It was entering all kinds of jibberish into the log on box and since I could not log on I thought it was other problems. So, the good thing is I'm back to Maverick and not using Yose. which has not been a real good experience so far. The chat with the tech at apple didn't have a clue, put me through two restores. Oh, well live and learn thanks for the response so quickly, you were spot on.
-
Hi,
I just got my Lumia yesterday evening. I'm from Malaysia by the way. The problem presist whenever I'm making a call or even when someone calls me, I can't seem to end the calls. Whenever I'm making an outgoing calls, the screen goes blank, and all the buttons including the back, home and search buttons becomes unresponsive. The only way to end calls is to wait for the other party to end the call, or I just have to wait until the dial tones end. What if the other party has their voicemail enabled? I have to wait until the voicemail call ends, then only I can continue using my phone. either those or I just had to switch off the phone by pressing the power button for 10 seconds.
please rectify and solve this issue immediately.
Solved!
Go to Solution.Hi shazzmania,
Thanks for posting and welcome to the forum.
Did you leave the factory screen protector on or did you place a 3rd party protector? What you describe is often caused by the screen protector covering the proximity sensor. On the Lumia 610 this protector is on the top-left on the front.
You can test the sensor by entering ##634# and starting the proximity test. A yellow circle should appear and when you move your hand over the sensor it should turn green. If it comes up and stays green the sensor is either blocked or defective. In that case make sure it is free and if it is return to your supplier or visit a Nokia Care Point.
Hope this helps, let us know how you get on.
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you! -
I cannot log into user account with old password after using migration assistant.
I used Migration Assistant to move only my Settings and Users from my Power PC (User name RLE 5) to my Mac Pro. Because of what I have read in these forums I did not migrate applications or and files/folders. I will do that manually. After migrating I tried logging in to my user account RLE 5 on my Mac Pro, but it is telling me I am using the wrong password. I used the same password I used on my Power PC, but with no luck. On my Mac Pro I went into System Preferences>Accounts>RLE 5 account and changed the password. I then rebooted and tried again. No luck.
Can somebody help me with this problem?
Thank you.What you propose would not solve the problem I am having. I must not have been clear about it. So I will elaborate.
I have a Power PC with 10.5.8. The admin user account name is RLE 5. I need a password to log into my root user account on my Power PC.
Then I bought a used Mac Pro with a clean install of 10.7.5 and no password set up yet for my admin user account. The admin user account name is Mac Pro. When I turn on the computer it opens to my admin user account where I have access to everything.
I used Migrations Assistant to move my Settings and Users from my Power PC to my Mac Pro. That seemed to to successfully.
So I now have four users on my Mac Pro: RLE 5 (the admin user from my Power PC with the password), Mac Pro (my admin user which does not require a password), and two guest user accounts.
I turn on my Mac Pro and it opens to my Mac Pro admin user account. I don't need to sign in. No problem.
I log out of Mac Pro. On my screen are the four user accounts. I click on RLE 5 (which was my admin user account on my Power PC that I migrated over to my Mac Pro) to log into that account and it asks me for a password. I type in the password I used for my Power PC. It keeps telling me it is the incorrect password.
I cannot log into my user account RLE 5 on the Mac Pro. I am being told I have the incorrect password. I've gone to System Preferences>Accounts and changed the password. It doesn't make a difference.
Also I cannot log into the Guest User account that migrated from the Power PC to the Mac Pro for the same reason. I have also tried to change the password for that Guest User account also but with no luck.
Another interesting thing has happened. I decided to give my Mac Pro admin user account a password by going to System Preferences>Accounts. But when I do a test to sign into my admin user account Mac Pro it tells me it is the wrong password. Luckily I can reboot the computer and it opens to my Mac Pro user without asking for a password. But if I log out of Mac Pro and try to then sign back in with the password it tells me it is the incorrect password.
Any suggestions would be appreciated.
Maybe you are looking for
-
Problem with udev rule to disable touchpad when USB mouse connects
Hi, I've been running Arch on this laptop, but I can't get this udev rule to work properly. What I want to happen is: when I plug in my usb mouse, the laptop touchpad is disabled, and the left and right buttons are reversed (I'm left handed) After fo
-
UIX:train - possible to default all links to be enabled?
Is there a way that I can default all of the links in a uix:train to be enabled, rather than just the next link after the selected Index? (selectedIndex+1) I tried using the disabled attribute and setting each link to disabled="false", but that doesn
-
Where does Delta Mechanism acts in LO?
Hi, Where does Delta Mechansim(V3 Update) acts in LO-Extraction?
-
My iPad has stopped syncing with iTunes on my home computer which has windows 8 Can anyone help
I Have windows 8 on my desktop computer with iTunes. REcently all of my apple products are not opening up with itunes. but instead open in my desktop which does not allow me to sync with iTune. Can anyone help with this problem please andrew
-
Yosemite and Blackmagic Speed Test
Hi all, on rMBP 15" with 1tb pci-e, after upgrade to Yosemite and after a clean install, my test on Blackmagic Speed test is around 480 mb/s in writing and 970 mb/s in reading. With Mavericks my test was around 980/1000 mb/s in writing and the 900mb/