Lumia 620 - Device not detected

Hi,
I've been using my 620 for a month now with no problems.I use the phone for developing purposes (Visual Studio 2012 + Windows 8 Pro).
Around 8 days ago, I received a pack of updates of the Nokia bundled apps which I installed and after that, when I connect the phone via the USB cable, the Phone is not detected on Windows.
I read lots of other threads about this kind of problems, even went through reinstalling all the Windows Phone SDK, reinstalled drivers (http://support.microsoft.com/kb/2749484), tried 4 different USB cables, on all the ports of my computer, tried 5 different computers too (two of which have Windows 7, three have Windows 8), removing the SD card, and the Phone still is not detected. The charging icon appears and the Phone charges OK though.
The Phone does not appear on Windows Device Manager under any kind of label (No Unrecognized Device either), Windows Explorer does not show any drive (MTP), its like the cable is not connected (although it charges without a problem).
I don't have the Amber update yet.
Is there any kind of setting (possibly hidden?) that controls the USB behavior of the phone? I read there are no Diagnostics tools for WP8, but, is there any way I can check if there is a hardware problem?
Thanks in advance!

The vol down + power is only a reboot. Perhaps you might consider a reset from Settings>about>reset your phone.

Similar Messages

My lumia 620 is not responding some time at the ti...

I have submitted my phon at nokia care for this issue that some time my lumia 620 is not responding at the time of call reciveing.They gave me after software upgradation.But is not solved then I contacted with customer care.They tolled me to submit the phon again.I have also submitted .Today from cre they called me and tolled that my phon is under observation.If they find the problem then they will send it to higher authority.But my problem not happen frequently.It happen mostly at the first call.The slide function does not work.Some time the answer button remains gray colour and does not function.Now I am sure that tommorow they will give me the phon saying there is no problem.Now friend please tell me how can i show my problem.its 2 nd time to submit .its a big fault to buy lumia620

hi mate, this is a user to user forum only for Nokia products and services. as such, Nokia care points are independently run franchises, and in this case you will need to persist with Nokia Care until the issue is resolved to your satisfaction.

Lumia 625 does not detect MicroSD cards, please he...

My Lumia 625 does not detect MicroSD cards when inserted.
I have tried powering off/on.
I have tried formating them in my PC.
I have updated my phone to 3050.0000.1334.0007
I have tried a Kingston 64GB SDXC Class10
I have tried a Sandisk Ultra 64GB SDXC Class10
I have tried formatting the cards in various ways including exFAT / FAT32 / FAT64 etc.
The only progress i made was when i tried formatting in NTSC and after inserting the card i recieved a message saying "incomattable formatted card inserted, do you whish to format the card in a compattable format?" After choosing yes, the phone formatted the card and then the card was undetected...
This was confirmed by checking the card in my PC, which confirmed that the card had been formatted using exFAT, which i believe is the correct format for the phone/card.
Clearly the phone is somehow detecting and writing to the card and the card is functioning properly, except that the phone does not detect that the card exists as expanded memory and will not allow me to use it.
Any help with this would be really appreciated!
Becoming quite frustrated now...

Hi Pepperami33,
Have you tried to perform a reset? It will delete all your data so backup is required. See this link: http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff for the steps on how to backup your files. After creating a backup, go to Settings > About > Reset your phone.
If the reset will not work, it is best to have your phone checked by our care point. Visit www.nokia.com/support for more info about the repair process.

Audio device not detected in control panels

+Audio device not detected in control panelsa I've been using my X-Fi Platinum with Windows 7 64-bit fine for around a month now. Recently I encountered a problem where I couldn't record any sound including talking on Teamspeak. I decided to reinstall the drivers, so I cleaned them out with a driver cleaner tool, and reinstalled. Everything works fine again, but none of the applications will work anymore. They all give an error message about not being able to detect the device. This includes AutoUpdate, Creative Audio Control Panel, and Creative Console Launcher. The card appears to be working correctly everywhere else: Device manager, teamspeak works fine now, windows recorder, guitar rig (guitar amp emulator), dx diag, all working well.
I also tried installing Daniel_K's driver pack to no avail.
Any ideas?
Thanks,
Glorfindel

/Hi Glorfindel,
Did?you?reinstall the applications from the installation cd?
Download and install the latest applications from our support site to see if it helps, click on the link and select your product. Note that some of the applications are not available on Windows 7.

X-fi fatal1ty device not detected when running speaker selection wizard

Gx-fi fatalty device not detected when running speaker selection wizard? ?
System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
Origional CD fails to detect the card, claiming a supported device is not present.
This card has worked prevously, and is verified as fully functional in windows Vista. ?
Please note Windows Vista can not be used.
I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
does anyone hav a sugestion that is not already posted on this forum.

Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
I'm guessing that the card is pretty much toasted eh?
--Jakk

Device not detected My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net.

Device not detected
My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net. Still the problem has not been solved

Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts

M-audio device not detected

I keep getting this message no matter what I do. Every time I try to op the M-audio firewire software, PT m-powered 7, I always get that message. "m-audio device not detected on this mac". I can't figure it out.

Is the device turned on? The blue light should be solid blue (not flashing).
If it never goes solid blue, try a different cable, try using the adapter power (not bus power). Run System Profiler and check that your firewire bus does not say "No information found". Make sure you have the latest drivers installed. Is the audio device shown in the System Preferences -> Sound drivers? Is the audio device one of the few compatible ones with PT M-Powered?
Never hot plug the firewire cable, especially if any device is bus powered.
See where that lot gets you...

*SOLVED* Device not detected/ No driver installed for X-FI Fatal

OK!!!! the only reason I signed up here was to post that I have (for me) solved my problem.
Before I get into details this occurred on a fresh system with latest drivers for hardware used.
The problem was installing my X-Fi card on my 680i m/b (striker extreme).. when I would install the driver it would simply crash the computer and when it started up the hardware was not detected to used the software and the device manager said no driver installed.. I tried everything.. I installed the driver in safe mode (yay it worked without crashing) then I booted for windows only to have it blue screen for a second and restart... repeating the cycle.. so i reinstalled windows again... I tried installing the driver different ways in windows.. nothing worked... I gave up...
BUT!!!
today while i was at work I decided I would try one last thing.
this is what got it going. I have SLI 8800ultras that covered the PCI slot on the bottom of my board and I though I would try the card in this slot to see if it worked there... so I disabled SLI took out my bottom card put in the sound card in the bottom slot, installed the driver... It installed 00% no crash... even better it worked after the restart!!!... so then I had to test if it worked in the top slot so I powered down, moved it up to my top PCI slot and windows auto set the driver for it (as it was already installed) It worked in the top slot now... Finally I put in the second 8800 to make sure it worked with this slot in use... It still worked fine with SLI enabled. because I was unhappy with the mess I made installing drivers all the time as I did with the many crashes I decided to do a fresh install of windows making this card work from the start so here is what you need to do if you have a 680i board with SLI. this is exactly what i did with my fresh install.
install only one GPU card..
Put the X-FI in a different slot that isn't giving you problems
Install windows
Install service pack 2
install your chipset drivers
install sound card drivers
power down, change sound card to permanent slot
test - power down
put in the second GPU card
install GPU drivers
Good luck you all having this problem.. I hope my solution helps you.
Bryan

I think I?got a similar?problem earlier today when I was messing around with?onboard audio?that I later removed and after unplugging a?USB headset.
Have you checked the device manager, is there any higlighted hardware that has a exclamation mark next to it.
I fixed the issue by simply uninstalling the WDM device with the exclamation mark and restarted.

Nokia Lumia 620 will not reconnect to network auto...

If i am in a location without o2 connection for more than 4 or 5 hours, when i move to an area with good o2 coverage the phone will not reconnect automatically, continues to say "no service".I have to turn phone off and on again and re-enter pin for it to reconnect. The sim is old BT cellnet card, but works ok in my old nokia C3 phone.

Hi icepete,
Welcome to the Nokia Support Discussions!
How's your phone now? Are you still having the same network connection issue after changing the SIM card? @hpholm is correct. For network-related issues, one of the first thing to check is the SIM card's functionality. Are you using a standard micro-SIM card, or a cut-up regular one? The Lumia 620 is designed to use a standard micro-SIM card. If your operator provided you a cut up regular SIM, you can request them to give you a standard micro-SIM.
If you're already using a micro-SIM card and are still getting the same issue, try doing the following troubleshooting steps.
1. Reboot the phone by simultaneously pressing and holding the volume down and power keys until it vibrates and restarts. This won't delete anything in your phone but will restore some settings like date and time.
2. Make sure that the phone's software is updated. Check it by going to Settings > Phone update.
3. Verify if all system apps are also updated by scanning the QR codes shown at this link: Nokia Windows Phone 8 App Updates.
We'll wait for your feedback.

Output device not detected

My Mac Air is in mute mode with no output device detected and I cannot move it out of that mode in system prefs.

I just realized I posted this in the wrong place. I moved it here. http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/monitor-on-secondary-display-output-device-not/2dd93e8b-4d29-42dd-9a6f-189992074ae8?tm=1430617069126

USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

I am running Arch as a host and XP on VMWare workstation 7. My primary purpose of installing XP on VMWare was to use my edit my Line6 POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
I have the usb controller installed.
Any suggestions?
Last edited by devadittya (2009-11-24 20:04:45)

I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

Audio device not detected

Product:
HP Pavilion dv6707us Entertainment Notebook PC
SN: [Personal Information Removed]
Product Number: KC323UA#ABA
OS: Windows Vista (32-bit)
The OS does not detect the audio device. Under the device manager, there is no entry for "Sound, Video, and game controllers"
The "Windows Audio Service" is automatically started.
Is there a way to check if the audio device has stopped working or if this problem is a software issue? Should we do a fresh Vista Installation?

Hello deburgess7,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Plz help, "device not detected" after windows updates?? I have so

I have An Audigy 2 ZS, and have the latest drivers. It has been working PERFECT, LAST NIGHT I had like 0 WINDOWS UPDATES, i dont' know if any of these had anything to do with this. But, I just now went to the icon in the task bar, and went to change SPEAKER SETTINGS to switch to HEADPHONES as I ALWAYS DO, I was surprised when the "unable to change the sound device to your selected device", you press ok, and it comes up TWO MORE TIMES, Right after each other.
I DO HAVE SOUND, FOR NOW. I have read other mentioning this error, but I didn't seem to find any answers. I can't go to speaker settings, or Surround Mixer,
OK, NOW I tried to go to GRAPHICS EQ, and an error came up that said "THE AUDIO DEVICE SUPPORTED BY THIS APPLICATION IS NOT DETECTED, THE APPLICATION WILL EXIT"
What is going on?
I went to device manager and it says that the device is working properly, and I DO have sound.
I DON'T get it. And I'm not likeing this. This is starting to worry me.
Does ANYONE know what is going on.. PLZ?

Thanx for the reply. I just now fixed it. I'm not totally sure what I did. Earlier I had uninstalled the device from Device manager, and then restarted, and it installed the drivers from the CD. It didn't fix it. So, I ran the LIVE update here at creative.com and downloaded the version I had before, I guess because when i had ran the update before I uninstalled the device the update wasn't there.
But, it started to update, and said something it had to restart the pc in order to install the update, and after it installed the new "creative audio console" it now works.
the whole thing was strange since I dind't lose sound at all. Just couldn't access settings.

[SOLVED] ImgBurn on Wine 1.5.13 - device not detected

Hi all,
I have installed imgburn 2.5.7.0 on wine 1.5.13 but my optical drive is not detected. Any ideas?
Thx.
Last edited by toni (2012-10-16 00:01:01)

karol wrote:
In the console output I saw that it whined about not finding /dev/sg* devices.
Run 'sudo modprobe sg' and try again. Worked for me.
Out of curiosity, why are you using ImgBurn under wine and not some Linux-native program?
Great! It worked, many thanks.
I always have used Linux-native programs for burning CD/DVDs (Brasero and k3b, I think they are great tools) but last day I downloaded and iso for my videogame console and I burnt it using Brasero but the iso was not working so I thought that maybe there was a problem with Brasero and since a lot of people was recommending to use ImgBurn, I decided to use it. Finally, I discovered that the problem was not in Brasero, iso burnt with ImgBurn (from Win because wine was not detecting my optical drive) was not working so I discovered the iso was being the problem.
Sorry for my ignorance, but what is ng?
Cheers.

[FINALLY SOLVED] "Audio device not detected by EAX Console/Speaker Setting Panel" Prob

PROBLEM: A message pops up saying "The audio device supported by this application is not detected" when clicking on any Creative Utilities like EAX Console or the Speakers Control Panel.
SOLUTION: After 6 hours of trying out all solution advices/attempts for the problem above, I figured that there are only 2 ways to get rid of this issue.
[color="#ff0000"]st way: Kill your whole system, by doing format C:
[color="#800000">2nd way: Follow this advice from Shag:
[color="#800000">?
[color="#800000">An installation error causes this problem which in the first instance is addressed by ensuring that you have disabled the onboard audio. If this does not work in the second instance you will need to uninstall the card as follows:
() Uninstall software and drivers either, through control panel or the installation CD
(2) Move the card to PCI slot 3 (if not already there) [VERY IMPORTANT]
[color="#800000">?
[color="#800000">(3) Manually remove registry entries as follows:
. Delete the files from "\Creative".
2. Delete the following registry node from the registry
- HKLM\Software\Creative Tech\Software Installed
- HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uni nstall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977
(4) Reinstall the software and drivers.
Eventually I'd like to recommend the Creative Team to put this solution in the FAQ, since I counted at least 20 members in this forum, having the same problem without getting to a solution.
Cheers,
Diabolius

BTW just in case people search for the error message in German:
in German the pop up says:
"Das von dieser Anwendung unterst?tzte Audioger?t wurde nicht gefunden"

Lumia 620 - Device not detected

Similar Messages

Maybe you are looking for