Lumia 620 not woking after cyan update

I did cyan update on lumia 620 , while updating it shows a sad smile and rebooted to running wheels. after 20-30 seconds its keep rebooting and the loop continues.
Future is here. where ????
help me if you can. anyway am not going to stay with nokia and wp.

Hi, vaissocial. Sorry to learn about your experience in updating your phone. Let's try to recover your phone through the following troubleshooting steps:
1. Hardware Reset
Note: All information on your phone will be deleted and anything that has not been backed up will be lost during this process. If you cannot access your phone's menu, unfortunately you will not be able to backup any data.
a. Make sure your phone is powered off.
b. Press and hold the volume down button.
c. Press the power button until the phone vibrates, then release the power button.
d. Keep the volume down button held until you see an '!' on the screen, then release the volume down button.
When the ! appears, press the following buttons in order:
volume up
volume down
power
volume down
You should see rotating gears on your screen for around 5 minute and its display will then turn blank for 30 seconds while your phone restarts. It will take several minutes for it to restart. Once it has restarted, you will need to follow the on-screen instructions and complete the initial set-up process on your phone.
2. If the issue remains, we suggest recovering your phone's software using the Nokia Software Recovery Tool. For more information, please check this link: http://www.microsoft.com/en-gb/mobile/support/faq/?action=singleTopic&topic=FA142987.
BTW, the link is from the Nokia UK website. For future reference, please refer to your local Nokia website. Keep us posted with the outcome.

Similar Messages

  • Lumia 1520 issue after cyan update

    After cyan update the screen start vibrating automatically and open Bing search and some random apps. I don't have any control of that.
    Then navigation bottom stop working. Sometimes I need to restart it or lock/unlock screen to make it work. This is very annoying. I never had this issue with wp8.

    Try making changes in Display settings and see if that is of any help: 1. Display - Sunlight Readability off 2.Touch - Sensitivity Normal
    Click on "Accept as solution" if it worked for you else if it was helpful you can click on "Kudos star" below.

  • Error code 80070005 after cyan update

    After cyan update, I cant sign in microsoft account in my lumia 520. There will be error code 80070005. Help me solve that problem.
    Solved!
    Go to Solution.

    even me also facing this problem plus other installed softwares are also not working and unable to update them from store. Its giving error code : 80070006 for updation. 
    Is there any issue in cyan update? If so, then why these guys rollout this update after so much testing.
    Attachments:
    screenshot.jpg ‏483 KB

  • Phone not working after OS update, phone not working after OS update

    phone not working after OS update, phone not working after OS update

    I do have a questiion.  I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen.  It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!!  I have tried holding down the home key and power button several times and the same message continues to appear. 

  • My facetime on iphone 4 is not working after the update to IOS7

    Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working  after The update to IOS7       Thanks xxx

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • C1-01 not working after Nokia update

    Hi,
    C1-01 not working after Nokia update.
    Message shows "Updating" then blank screen, any ideas?

    How did you start the update? OTA or using Nokia Suite?
    Try to run the update through Nokia Suite again.
    If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
    Don't forget if your problem is solved to press the "Accept as Solution" button.

  • Aperture crashed and will not open after last update.  Anyone else have this problem?

    Aperture crashed and will not open after last update.  Anyone else have this problem?

    Yes.  See this very forum for 50 threads on it, that explain the solution.

  • 1080p videos not working after fp2 update

    some videos are not working after fp2 update..videos which are worked in fp1 also not working after belle fp2 update...it sucks

    What is the phone model?
    Could you give us the url to the video on question?

  • Facebook birthdays not working after ios7 update

    Facebook birthdays not working after ios7 update?

    Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
    Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection. 

  • MAC Mini does not restart after Yosemite update

    I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems.  I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
    Any help or ideas appreciated 
    Larry

    Okay, this is strange.  I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%.  I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
    Larry

  • Why is my iPhone 4 not ringing after iOs7 update?

    Why is my iPhone 4 not ringing after iOs7 update?
    I checked volume on side & n settings & rebooted

    Hello there Tgurnell
    Thank you for using Apple Support Communities.
    It sounds like the ringer is not ringing after the update to iOS 7.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Sterling

  • Airport not working after osx update-keychain?

    Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
    "Confirm Application Change
    Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
    This chain is permanent and affects all keychain items used by aiport.
    Don't Change Change All
    What should I have replied? Anyway to reset the airport or download it again?
    Thanks.
    Anyway to reset this or download again? Thanks.

    What should I have replied?
    Change All

Maybe you are looking for