Lumia 625 does not detect MicroSD cards, please he...
My Lumia 625 does not detect MicroSD cards when inserted.
I have tried powering off/on.
I have tried formating them in my PC.
I have updated my phone to 3050.0000.1334.0007
I have tried a Kingston 64GB SDXC Class10
I have tried a Sandisk Ultra 64GB SDXC Class10
I have tried formatting the cards in various ways including exFAT / FAT32 / FAT64 etc.
The only progress i made was when i tried formatting in NTSC and after inserting the card i recieved a message saying "incomattable formatted card inserted, do you whish to format the card in a compattable format?" After choosing yes, the phone formatted the card and then the card was undetected...
This was confirmed by checking the card in my PC, which confirmed that the card had been formatted using exFAT, which i believe is the correct format for the phone/card.
Clearly the phone is somehow detecting and writing to the card and the card is functioning properly, except that the phone does not detect that the card exists as expanded memory and will not allow me to use it.
Any help with this would be really appreciated!
Becoming quite frustrated now...
Hi Pepperami33,
Have you tried to perform a reset? It will delete all your data so backup is required. See this link: http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff for the steps on how to backup your files. After creating a backup, go to Settings > About > Reset your phone.
If the reset will not work, it is best to have your phone checked by our care point. Visit www.nokia.com/support for more info about the repair process.
Similar Messages
-
Aperture does not detect CF Card
I am using Aperture 2 with my Canon EOS 30D. I used 2GB Sandisk CF cards and have had no issues ever. Recently I bought a 4GB and 16GB CF card and for some reason Aperture/Mac does not detect these cards. When I connect my camera via USB to my macbook, and click import, it does not show my Canon as a drive available to choose pics from. With my 2GB card it does.
Any ideas?Does the card show up in the Finder? I suspect this isn't an Aperture issue.
-
Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards
Hi,
My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 21fa
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: mei
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Lenovo Device 21f3
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i801_smbus
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
Subsystem: Lenovo Device 21fa
Kernel driver in use: sdhci-pci
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
Kernel driver in use: rtl8192ce
lsmod | grep sd
sd_mod 29560 4
scsi_mod 133434 2 libata,sd_mod
sdhci_pci 10834 0
sdhci 23695 1 sdhci_pci
mmc_core 82791 2 sdhci,sdhci_pci
Nothing new happens if I type dmesg | tail after inserting a card.
I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
Thank you!
Last edited by Fayden (2012-12-22 05:13:09)In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
Install it and enables it with systemd and it should work correctly! -
Msi x99 gaming 9 ack does not detect capture card when using with xsplit
msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth... -
Photoshop CS5 64-bit does not detect Video Card
I just updated from CS4 to CS5. I have a core i7 with an ATI HD 5700 series graphics card with the most recent driver 10.9. Photoshop is also updated to 12.0.1. For some reason, only the 64-bit version does not detect the graphics card. Photoshop CS4 64-bit and Photoshop CS5 32-bit see the graphics card fine. I noticed a few others have had the same issues. Has this problem been addressed yet? If not, is there a workaround?
It's a recently-reported issue with Catalyst 10.9 on the Radeon 57xx.
See this thread: http://forums.adobe.com/message/3184458
-Noel -
ITunes does not detect my iPod-- please read and help?!
I tried all the help Apple told me to do. I reset my iPod(didn't work) and then I downloaded the newest version of iTunes. That didn't work either. My iTunes still does not detect my iPod. The newly downloaded iTunes was at least supposed to tell me that my iPod was "corrupted" but it didn't. So... I'm not sure that it is. But that is the only reason Apple tells you could cause this. So yeah, I'm pretty lost right now! Does anybody know anything to help(by the way, I own a 5th generation iPod nano)? Thanks
Take a look at this web page and see if it helps. Some of the suggestions are ones you say you've already tried, but there are other suggestions, one of which may help:
iPod missing in "My Computer" or in iTunes on Windows
Good luck. -
Openfiler does not detect NIC cards
Hi,
During installation of Openfiler on a Dell T410 with two network cards, the install didn't prompt for network configuration as per the following article.
http://www.oracle.com/technetwork/articles/hunter-rac10gr2-iscsi-101317.html
Any help please.
Thanks
A/Aasgar_amin wrote:
During installation of Openfiler on a Dell T410 with two network cards, the install didn't prompt for network configuration as per the following article.A year old article - a very long time in the rapid evolving life cycle of Open Source software. Which means the article may only be correct for the exact versions of the kernel and s/w installed as mentioned in the article.
Is there an alternative to openfiler that I can use? To be honest - you need to rethink your attitude if a simple issue like this, s/w not behaving as a year old article stated, is a show stopper.
Have you bothered to look at the OpenFiler documentation? There are installation and configuration guides. Have you confirmed that your platform's NICs are working?
Very likely the problem at hand is due to ignorance. And unless you can discard that, proclaim yourself knowledgeable about OpenFiler, you should not consider binning a s/w product because of your inability to configure it. -
Re: msi x99 gaming 9 ack does not detect capture card when using with xsplit
I concur with all of badboy2k's thoughts. He puts forth a very good explanation, and it makes sense.
I'd get the power supply out and get a good branded power supply (Seasonic is my preference at this time)....I have a MSI z87-GD65 and I cannot get the computer to reboot.
I am on a fresh windows 7 install.
Specs
i5 4690k
EVGA GTX 670
EVGA 750w
G skill 2x8gb 2400
samsung 250gb ssd
Did:
Latest bios update from msi
CMOS reset
Latest Intel ME driver from msi -
Win XP does not detect onboard ethernet card
Hi,
i have bought a used T41 (2373-tg5) and installed XP Pro SP3.
I have installed all the drivers and everything is working fine. The only problem i have, is the fact, that XP does not detect my onboard 10/100/1000 Ethernet LAN card. It does not show up in the device manager and manually searching for new hardware is to no use.
I have also looked at the BIOS config, the onboard ethernet card is listed as being "enabled". I am sure, there was a device marked with a yellow exclamation mark in the device manager named "ethernet adapter" once. I am not sure, wether this was the WLAN card, i have successfully installed a driver for...it is completely gone now though...
Is this some weird XP thing? I thought, i had read something like this once, but cannot remember.cnhoff, wilkommen im Forum,
when you enter BIOS the MAC address of the internal LAN card should be shown at the bottom, is it showing a number or is it all zeros? All zeros means that there is no LAN installed which would mean in your case a new mainboard or using a pcmcia LAN card.
Grüße
edit: Typo
Message Edited by andyP on 08-13-2008 07:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Just got a second hand iPhone 4s and tried to connect to iTunes on laptop running windows 8.1 does not detect iPhone, iPad or iPod. Can any help please? iPhone is version 7.1 and running latest itunes
Hello HungryHoover,
It sounds like you are not able to see any iOS devices in iTunes on your PC. I recommend the following article to help you troubleshoot that named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
Regards,
Sterling -
Hello everyone,
I just updated my 3GS from iOS 5.0.0 to 5.0.1
Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.You do not need to keep posting the same thing over and over again.
Look to the right side of this page at "more Like this" or do a forum search. -
TS1363 iTunes does not detect my iPhone, sends error message, please help
iTunes does not detect my iPhone when I plug into ligthening cable- error message 0xE8000084 appears, please help
Hello Brian,
Here is an article that should point you in the direction of a resolution. It has a section about the OXE errors.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
All the best,
Sterling -
Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
Help me please! greetings thanks!Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
If you have some different page, try the quick fix in Fred McD's reply.
If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck? -
Wi-Fi does not detect on Satellite L40-139
Hello!
I have a problem with Wi-Fi connection on Toshiba L40-139 under Windows XP Professional
I have all drivers for this model from this site.
Also Intel PRO/Wireless 2915ABG: 9.0.4.39 adapter was installed.
But during the installation there was an error "Couldn't install driver".
Wi-fi card does not detect by device manager
When I try connect to Wi-Fi network I have a message that there isn't any Wi-Fi devices on my notebook.
Help, please!Hi
As Im not mistaken the L40-139 PSL40E supports the Atheros 802.11g WLan card.
And therefore you should use and install the Atheros Wlan card driver!!!
Additionally you should perform a BIOS update.
According to some postings here in the forum, the BIOS update helps to solve some WLan issues.
Check it out & good luck
Bye -
H55m-e23 not detecting video card
Hello i recently upgraded my pc with new video card (asus engtx570 directcu ii gtx 570) the problem is that main board(MSI H55M-E23) is not detecting video card, so here is what happens when i turn the pc on it starts to beep 1long beep and 2 short beeps. First i thought it might be power suply so i bought new power suply with 700w and still the same thing happens, then i tryed with LC850w and same thing so i guess the power supply is not the problem. I removed rams and tryed with 1 stick, i have 4 different sticks and same thing happened with each stick. i tested the videocard on different mainboard (ASUS P5Q PRO and ASUS P8H67-M PRO REV. 3.0) and videocard worked fine. i tested my mainboard H55M-E23 with sapphire ATI HD 6950 and it worked too so the pci slot is ok, and now i dont know what to do more i tested all things possible. So what is the problem? my mainboard does not want to detect videocard (asus engtx570 directcu ii gtx 570) 3beeps ( 1long and 2 short) PLEASE HELP!
CPU: Intel® Core™ i5-760 Processor Clock Speed 2.8 GHz Max Turbo Frequency 3.33 GHz
Main Board: Msi h55m-e23 Bios: AMI BIOS Version 17.4
Video Card: Asus GeForce ENGTX 570 Direct Cu II
Memory: Kingston 1x2GB 1333MHz DDR3 CL9 DIMM 1.5V
Apacer 1x2GB 1333Mhz DDR3 CL9 1.5V
PSU: LC 850W Arkangel LC8850, 140mm FAN, V2.2
850W max., ATX V2.2, Free-Plug cable-Management, Active-PFC, 3 x PCI-Express, 4 x +12V: 60A, S-ATA,
+3,3V: 30A
+5V: 28A
+12V1: 18A
+12V2: 18A
+12V3: 18A
+12V4: 18A
HD: Seagate Baracuda 7200 - 320GB
Windows 7 x64
For the memory ( i did try with only 1 stick at the time... they go well together with my other card Sapphire ATI HD 6950)
Maybe you are looking for
-
ITunes messed up - how to restore iPod to iTunes?
My father has asked for some help. He has an iPod, which was correctly sync'd to his iTunes on his Windows XP computer. However, some 'expert' came and messed with his computer. Now, his music is spread over a couple of folders, and the iTunes appear
-
Dear, I'm going to replace controls by MAF in my android application. I import libraries: - mafuicomponents-1.2.1.jar - maftreeview-1.2.1.jar - mafsettingscreen-1.2.1.jar - maflocaleawarecontrols-1.2.1.jar - mafcalendar-1.2.1.jar I created an simple
-
I have a web page with some data on in that I am sending to the server (using post) I submit the data and I go to a page that says the dat has been submitted. I then hit the back button and I am able to pull up the web page with the data that I had e
-
Please help me resolve this JSP compilation error
Hi, We have deployed our web app in Sun one web server 7.0 running on Sun os, and with JRE 5.0. Until recently, every thing was running fine, but since a few days, I am unable to get a JSP file compiled. This file, has a <%@include file= .. > to anot
-
Can't get CS5 to accept Nikon D7100 raw images...Any reasons why. CS5 updates didn't help