Lumia 625 wont start after power off!

I bought a lumia 625 5 months ago and it worked fine. but recently when i switch off power it wont turn back on. So i had do keep it in air plane mode at night. After like one hour it switches on back. I tried resetting and restarting. Phone only vibrates after i release power key ( in all resetting methods), but does not show anything in the display. How can i fix this. help would be appreciated

I'm going to suggest a hard reset of the phone. Do a backup first, then either go to Settings/About and select Reset my Phone, or for the 625:
Warning! All data will be lost!
1.Power off your phone
2.Press power button and after phone vibrates once press volume down until you will see exclamation sign on the screen
3.Press in this order:volume up
volume down
power
volume down
4.Wait until format ends and the phone restarts
I'm thinking that something with the sleep mode has gotten corrupted in memory. If this doesn't clear the problem, then you likely have a hardware/firmware fault and the phone should be taken in for repair or replacement.
/drt

Similar Messages

Mac Mini wont start after power outage, and problem copying iPhoto library. HELP!

    So, recently there was a power outage in my neighborhood, the power was intermitent for about 2 hours, during this time my mac rebooted itself several times, but on the second time it rebooted the power went out during boot, then the power finally went out for good, it was back in about 3 hours, but when i finnaly turned on my mac it got stuck at the Apple logo with a spinning wheel and a progress bar that wouldnt go past 40%, when i boot holding command -v it said that there were a lot of errors which were automatically fixed, except for one, "Incorrect Thread records" or something like that.
    I have another partition with Mountain Lion installed for emergencies, the other one with Lion became inaccessible to mountain lion or any other OS X version, but oddly enough, I can access my Lion partition via HFSexplorer and see all my files untouched.
    My main concern are my pictures in iPhoto, and thats about 36Gb of data, I want to backup them to my windows pc by copying the whole iPhoto library package, but HFSexplores for some reason cant copy the folders with date (XX/XX/XXXX) with the /, and it keeps changing them to XX_XX_XXXX and I know that would pretty much break my iPhoto library!
I googled my drive problem and people said that I need a Disk Utility called DiskWarrior, but I cant seem to find how to to use it, I got a copy from a friend, it was the digital version of the boot disk which need to be burned to a dvd.
Any help would be appreciated, and sorry for the bad english

OK, we need more info about your Mac. Do you know how much RAM it has in it?
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349

770-G45 wont start after ShutDown

Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
MS 7599 ver. 2.0
Bios version 10.2
MoBo is new bought it 3 days ago.
PLEASE HELP!!!!!

First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

Intel imac wont start after changing permission

intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

My apologies for the inept instructions.
Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
sudo su
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
chown root:admin /Applications
chmod 0775 /Applications
chown root:admin /Library
chmod 1775 /Library
chown root:admin /System
chmod 0775 /System
chown root:admin /Users
chmod 0775 /Users
chmod -R -N /Applications
chown -R :admin /Applications/*
Again, my apologies.

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

Is there any app for phone auto start after swithced off??

Is there any app for phone auto start after swithced off??

Are you looking for an app which will startup the Z10 at a specified time?
I don't know of one. I have a feeling once OS 10.2 is available you'll see apps such as this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

C871 default config after power off - bad nvram?

Hello,
I have new C871 with default configuration. after reconfiguring and reload, my config is loaded from nvram. But after power off, is there default configuration. What's wrong? config register is set to 0x2102 (that's ok).
any ideas?
thanks, 
martin

I found the reason - construction 'bug'. reset button was always presset.

IPad WEP password required after power off.

Hi,
On my ipad mini I am required to re-enter my WEP password after power off.
Why is this and how do I prevent it from happening?
This does not occur on my mbp or iphone 4s.
Thanks,
Rob.

Although it should work flawlessly, for some reason mobile devices don't always play nice with WEP. You're far better off with WPA2 (security-wise) anyway. If you have the ability to change your network's security, it might be easier to just get away from WEP than to try to make your mini work with it.

The browser doesn't start after turning off and turning on the computer

The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
* check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
thank you

My System wont start after setting FSB to 200

My System wont start after I'd set my FSB to 200,
when the system starts, nothing comes up, and my Pc screen LED just blinks,
I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
Please help me:-(
Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
3ghz AMD BARTON
NVIDIA nforce2 k7bn2 Delta
512 DDR RAM PCI3200
300WATT

Quote
Originally posted by roobster
set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
does not work if he has a 3000.
they are multiplier locked.

SSMS wont start after Installing SQLServer

Hello,
After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
no success.
Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
I am assuming that this has something to do with it.
Can someone please tell me how to fix this?
Thank you.
here is the error message received

Hi,
Try the below solution and see how it works.
Note: Take a backup of the key before make any changes on the registry keys.
http://support.microsoft.com/kb/322756
Start regedit.exe
Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
Delete 12.0_Config
Restart ssms.exe
Here is the original thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
Thanks.
Tracy Cai
TechNet Community Support

Safari wont start after i installed avi player any suggestions?

safari wont start after i installed a avi player any suggestions?

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

HT4623 Hello! Answer Why do not open pictures after power-off at iphone 3? Thank you!

Hello! Answer Why do not open pictures after power-off at iphone 3G? Thank you!

This problem is already two years.

Lumia 625 not charging, after battery dead

Last night i was using my lumia 625 and it was working fine.
but it drained to 3% and switched off. i thought i would charge it in the morning. Now its not charging. i have kept it for charge for more than 3-4 hours, but no signs of life is there.
i have tried volume and power buttons pressed together, it's not helping. Battery was working fine before.
what should i do?...
It would be really helpful if someone could help

A phone has discharged completely, it may take 30 mins or more to show any sign of life. If it still does not start, press and hold the volume down and power keys for a few seconds until the phone vibrates and starts.
If it doesn't start still, try the Software Reinstallation Tool - you will need to use the "dead phone" mode for a phone that won't power up.

Bad vi after power off

sometimes LV can't open VI if system crushed (power off) when this VI is opened by LV
this trouble appear not every time.
I had experimented with this trouble and not found any rule (about dozen attempts and no problem with vi)
But yesterday I was on customer object and system crushed (power off) twice. After second crush I had found that can't open main VI (attached).
This error was in LV6 (my first version), in LV7 fnd now in LV8 (8.3)
I'm not sure, but may by bad file is smaller than correct file (from backup).
Why this happen and how can I avoid this error?
Attachments:
data_processing.vi ‏231 KB

Hi Artem,
I would not call it a LV-error when you switch-off (or crash) your pc while working... How should LV prevent from crashing?
There is no other answer than 'save early and often'! And starting from LV8 there is an auto-save option similar to MS Office (save every x mins)!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Lumia 625 wont start after power off!

Similar Messages

Maybe you are looking for