Lumia 710 . wifi - freezing after sleep / doesn't ...

So my lumia 710 with the latest software has the following problem...
If my wifi is stopped and I'm trying to start it, it will tell me after few seconds 'no networks found' . 
If I turn off the phone with turned on WIFI and then if I turn the phone on, it will find my wifi network, but if I turn wifi off it won't be able to find any networks until a new restart.
And the last case; If the phone goes into sleep while wifi was on , wifi section will get frozen until I remove the battery to force its restart.
Please, is this a software or a hardware problem? Is there a fix? Thank you.

Does this occur with any wi-fi network or just with your wi-fi network?
Did you restore the iPhone from the iPhone's backup, or as a new iPhone or not from the iPhone's backup?
If the former, you placed the iPhone right back where it was. If the latter, the iPhone has a hardware problem.

Similar Messages

  • IMac 2007 freezes after sleep and then can't find hard drive after reboot.

    I'm having a problem where my mid 2007 iMac (2.4 GHz core duo w/ 6 Gb of ram) freezes after sleep.  It seems to happen only when an application was open at the time of sleep.  The freeze manifests as the cursor turns into the spinning wheel, but the computer can't do anything.  Command-option escape doesn't work.  Most of the time after I reboot, the iMac can't find the hard drive.  If I leave the computer off for 15 minutes then it will reboot ok.  Is my hard drive going out or do I have another problem?  I'm running Mountain Lion 10.8.5.  I've repaired permissions, verified the hard drive and reset the NVram but I still have the problem. 

    Here is the console right before the time of the crash.
    11/10/13 10:02:13.069 AM SyncServer[18050]: [0x7fe02140bde0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
    11/10/13 10:02:13.912 AM com.apple.time[177]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    11/10/13 10:02:16.947 AM iCalExternalSync[18051]: [ICalExternalSync ]Encountered exception: *** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205] withStack: (
              0   iCalExternalSync                    0x000000010186ca60 iCalExternalSync + 125536
              1   iCalExternalSync                    0x000000010185bac9 iCalExternalSync + 56009
              2   iCalExternalSync                    0x000000010186b694 iCalExternalSync + 120468
              3   libdyld.dylib                       0x00007fff8abf17e1 start + 0
              4   ???                                 0x0000000000000005 0x0 + 5
    11/10/13 10:02:16.948 AM iCalExternalSync[18051]: [ICalExternalSync ]NSException name:NSRangeException reason:*** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205]
    11/10/13 10:02:16.959 AM SyncServer[18050]: [0x7fe02140bde0] |Server|Warning| lost connection 0x7fe021496b30 to com.apple.iCal
    11/10/13 10:02:31.511 AM com.apple.time[177]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    11/10/13 10:02:32.786 AM iCalExternalSync[18053]: [ICalExternalSync ]Encountered exception: *** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205] withStack: (
              0   iCalExternalSync                    0x000000010618ba60 iCalExternalSync + 125536
              1   iCalExternalSync                    0x000000010617aac9 iCalExternalSync + 56009
              2   iCalExternalSync                    0x000000010618a694 iCalExternalSync + 120468
              3   libdyld.dylib                       0x00007fff8abf17e1 start + 0
              4   ???                                 0x0000000000000007 0x0 + 7
    11/10/13 10:02:32.787 AM iCalExternalSync[18053]: [ICalExternalSync ]NSException name:NSRangeException reason:*** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205]
    11/10/13 10:02:32.797 AM SyncServer[18050]: [0x7fe02140bde0] |Server|Warning| lost connection 0x7fe021434b60 to com.apple.iCal
    11/10/13 10:04:21.138 AM com.apple.usbmuxd[29]: _SendAttachNotification Device f0:d1:a9:1b:e1:0b@fe80::f2d1:a9ff:fe1b:e10b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
    11/10/13 10:04:46.805 AM iTunes[15640]: Entered:_AMMuxedDeviceDisconnected, mux-device:48
    11/10/13 10:04:46.805 AM iTunes[15640]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:48
    11/10/13 10:04:46.806 AM iTunes[15640]: tid:16dcb - Mux ID not found in mapping dictionary
    11/10/13 10:04:46.806 AM iTunes[15640]: tid:16dcb - Can't handle disconnect with invalid ecid
    11/10/13 10:11:17.664 AM com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7f8ac9627660> Sun Nov 10 10:47:04 2013 PST (approx)
    11/10/13 10:11:17.664 AM com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7f8ac9627660> Sun Nov 10 10:47:04 2013 PST (approx)

  • Satellite Pro A210 PSAFHE - Windows 7 - freezes after sleep/hibernate

    I have a Satellite Pro A210 PSAFHE running dual boot Windows XP/7
    Using Windows 7 - either 32 or 64 - the system always freezes after sleep/hibernate.
    This never happens with XP which sleeps and hibernates OK..
    There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    I like System 7 and use it on my other computers but without sleep/hibernate I will revert to XP.

    Hi
    > There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    Sorry mate but you are wrong.
    All Win 7 drivers for Satellite Pro A210 are released on the Toshiba European driver page I recommend checking it again
    Since this issue does not appear using Win XP, I can say for sure that this has nothing to do with the hardware but its a software related issue
    I recommend updating the graphic card driver
    Furthermore there is a new BIOS for Sat Pro A210 PSAFHEits v2.0
    Check if you are using the latest version

  • Lion freezes after sleep

    Anyone find a fix for the freeze after sleep on Lion

    Try using disk utility to verify/repair your hard drive, also repair your permissions. 

  • Help: Macbook freezes after sleep and gray screen freeze on startup

    I've got a new MacBook (45 days old, minimal usage) and I'm starting to have some problems.
    When my computer goes to sleep after inactivity I have a hard time waking it. The screen turns on right away but the mouse/cursor remains frozen. The computer does not respond to any keyboard commands. I usually have to reboot the machine when this happens. I noticed this problem a few weeks ago and it has since become more and more frequent.
    I've also noticed that with some regularity my computer freezes on the gray screen during start up and never reaches the mac icon. This has become more and more frequent since I first noticed the initial problem and happens one in every 3 or 4 startups.
    I haven't installed any new software except for the regular software upgrades. Nothing extraordinary.
    Is it possible that these problems are related? Am I doing something wrong?
    Any help would be greatly appreciated.

    The grey screen on startup may be the known issue, especially if you start to get vertical lines on the screen. If you can reboot using PRAM reset, go to the displays control panel, set the resolution to something besides your current resolution, then revert to your original setting. That should fix that part.
    As far as the freezing after sleep goes, I had a similar issue where the macbook would not actually go to sleep (white light stayed solid), and opening the lid would result in a dimmed screen that I had to force-shut down the computer to get out of. After sending it in for RSD, this seems to have been resolved.

  • Imac freezes after sleep

    Just 4 days ago, I noticed that my iMac freezes after sleep, I haven't added or altered any programs nor downloaded any new software.
    System was working perfectly prior to this.
    Any ideas? My iMac is a 21.5 inches, 3.06 GHz Intel 2Duo, 4GB 1067 MHz DDR3, 500GB HDD
    Thanks

    Just 4 days ago, I noticed that my iMac freezes after sleep, I haven't added or altered any programs nor downloaded any new software.
    System was working perfectly prior to this.
    Any ideas? My iMac is a 21.5 inches, 3.06 GHz Intel 2Duo, 4GB 1067 MHz DDR3, 500GB HDD
    Thanks

  • After installing 10.9.4 computer freezes  after sleep

    After I installed 10.9.4, my Imac bean to freeze after being asleep.  Sometimes I can move the mouse, but it has no effect on anything.  Most of the time I move the mouse or keyboard and I get eh color wheel of death.  Here is my info, can you help?
    EtreCheck version: 1.9.12 (48)
    Report generated August 6, 2014 at 7:06:43 PM MDT
    Hardware Information:
      iMac (27-inch, Mid 2010) (Verified)
      iMac - model: iMac11,3
      1 2.93 GHz Intel Core i7 CPU: 4 cores
      8 GB RAM
    Video Information:
      ATI Radeon HD 5750 - VRAM: 1024 MB
      iMac 2560 x 1440
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 0 days 5:12:25
    Disk Information:
      WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 902.82 GB (631.84 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 84.56 GB (38.76 GB free)
      PIONEER DVD-RW  DVRTS09 
    USB Information:
      Apple Inc. iPhone
      Logitech USB Receiver
      Apple Internal Memory Card Reader 31.91 GB
      NIKON D7000 (disk1s1) /Volumes/NIKON D7000: 31.91 GB (28.3 GB free)
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple, Inc. Keyboard Hub
      Fitbit Inc. Fitbit Base Station
      Apple, Inc Apple Keyboard
      Apple Computer, Inc. IR Receiver
      Apple Inc. Built-in iSight
    FireWire Information:
      G-TECH OEM ATA Device 00 800mbit - 800mbit max
      EFI (disk2s1) <not mounted>: 209.7 MB
      G-DRIVE (disk2s2) /Volumes/G-DRIVE: 999.86 GB (937.8 GB free)
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [not loaded] arcana.PRAM (6.1) Support
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
    Startup Items:
      ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [running] com.crashplan.engine.plist Support
      [running] com.fitbit.galileod.plist Support
      [failed] com.google.keystone.daemon.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [running] com.rim.BBDaemon.plist Support
      [loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
      [failed] com.vmware.launchd.vmware.plist Support
      [not loaded] com.vsearch.daemon.plist Support
      [failed] com.vsearch.helper.plist Support
    Launch Agents:
      [loaded] com.avast.userinit.plist Support
      [failed] com.google.keystone.agent.plist Support
      [running] com.rim.BBLaunchAgent.plist Support
      [failed] com.vsearch.agent.plist Support
    User Launch Agents:
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.avast.home.userinit.plist Support
      [running] com.google.keystone.agent.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items:
      SpeechSynthesisServer
      Canon IJ Network Scanner Selector EX
      Dropbox
      CrashPlan menu bar
      Fitbit Connect Menubar Helper
    Internet Plug-ins:
      Easy-WebPrint EX: Version: 1.1.0 Support
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      AdobePDFViewerNPAPI: Version: 10.1.10 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewer: Version: 10.1.10 Support
      npDDRia: Version: 0.0.14.2 - SDK 10.9 Support
      EPPEX Plugin: Version: 3.0.5.0 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Safari Extensions:
      avast! Online Security: Version: 9.0.2022.120
      1Password: Version: 4.2.3
      Dragon Dictate: Version: 12.81.000.006
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
      Flash Player  Support
      Flip4Mac WMV  Support
      Secrets  Support
      ArcanaStartupSound  Support
    Time Machine:
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 840.81 GB Disk used: 252.37 GB
      Destinations:
      G-DRIVE [Local] (Last used)
      Total size: 931.19 GB
      Total number of backups: 33
      Oldest backup: 2014-03-03 19:34:10 +0000
      Last backup: 2014-03-13 00:00:27 +0000
      Size of backup disk: Adequate
      Backup size 931.19 GB > (Disk used 252.37 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          1% WindowServer
          1% fontd
          1% CrashPlan menu bar
          0% Fitbit Connect Menubar Helper
          0% Dropbox
    Top Processes by Memory:
      164 MB softwareupdated
      131 MB mds_stores
      131 MB com.avast.daemon
      123 MB CrashPlanService
      106 MB Finder
    Virtual Memory Information:
      4.89 GB Free RAM
      1.83 GB Active RAM
      525 MB Inactive RAM
      781 MB Wired RAM
      1.96 GB Page-ins
      0 B Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\) \\(.+\\)/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • T440s in Windows 7 Pro loses Wifi connection after sleep 7260AC

    Hi guys,
    I keep having issues waking up from sleep with my T440s.  It WILL NOT connect to wifi and the wireless adapter under windows adapter settings disappears.  Only thing that fixes this is a reboot.  I have removed "allow windows to turn this device off" under wireless settings.
    Driver: 17.12.0.4
    Dated: 28/08/2014
    Software: Lenovo Access Connections
    I do not use windows to connect to WIFI.  I have dedicated profiles for each of my wifi networks at home and work.
    This is a serious productivity killer.
    Any help would be appreciated.
    Thanks!
    Solved!
    Go to Solution.

    This is a well-known issue with the AC card.  Go take a look at the Intel forum.
    You don't necessarily have to reboot to get the card back.  Right click it in Device Manager and then disable/enable.  It will come back online.
    Some tips that have worked for many:
    -DO enable the power saving setting.  If I disable it on my T440p, the card is offline upon wakeup. 
    -Ditch ProSet and let Windows manage your wifi.  Profiles might be convenient, but...
    -Ad Hoc QoS - WMM enabled.  Enable it on your router(s), too.
    -Ht Mode - VHT
    -U-APSD support - this one can go either way.  Some leave it on and don't have an issue.  Some have to disable it to have the card work after sleep.  You have to play with it. 
    And, I really believe that the router/modem type can make a difference, too.  Some just don't work right with this card no matter what you tweak on the card.  With this card, I think an AC router/modem is the way to go. 
    Another thing is the driver itself.  I had wake issues when I first got this ThinkPad about 10 months ago.  Then, Intel released v 16.6 and that one fixed it.  I've tried all of the 17s released since and all of them caused sporadic failures to wake.  So, I have always rolled back to 16.6 and it always wakes. 
    Note this:  If you use Lenovo Update, it won't create a restore point in Windows so your "Roll Back Driver" button might be greyed out in DM.  Always manually create a restore point before you update a driver.  And, if it's working, whatever it is, leave it alone.  If the release notes don't address an issue you're having, skip it. 
    Driver updating is way oversold here and elsewhere.  If you're determined to update anyway, at least don't be an early adopter.  Let other peeps do it first and then come back here and see about the complaints!  Also, you can download the driver at Intel in their Administrators sets of drivers.  Bare drivers and no software overhead. 
    Good luck.

  • Macbook pro freezes after sleep, after 6 months of not having that problem

    Hello,
    I'm really frustated with my macbook pro. Like the tittle says, my computer freezes after waking up and the only thing to do is use the On/Off button. It is a macbook pro '13 2010.
    This problem first happened around 6 months ago. Around Feb '11, i experienced the same issue. First thing i noticed was that the wifi suddenly stopped working. To try to fix it, I turned airport off and then couldn't turn it back on and had to restart my machine. Then when closing the lid and then opening it again, my computer would work for about 5 min and then freeze. Nothing worked and I had to shut it down using the power button.  Then the problem got worse because the computer started freezing randomly. I know it wasn't an application problem because it happened using different apps. I took my computer to an authorized apple service provider and they told me the harddrive had some bad sectors i think, and they replaced the harddrive because I was still under earranty at the time.
    Now, Sept '11, the problem came back. First the airport problem happened and now my computer freezes when waking up, the exact same thing that happened 6 months ago. I went to disk utility and repaired disk permisions and still no solution. My warranty expired last month so calling apple won't be of any help. I installed lion the day it came out and was working without any problems until now, so I don't think lion is the problem.
    Has anybody had this same problem with their computer? I don't know what to do or how to tell if my harddrive is causing the problem again.
    Thanks

    All of the new unibody MBs/MBPs can use (6GB 4X2GB)
    But yes you should definitely make sure the RAM is seated correctly and you didn't touch the gold part of the RAM during installation. Though if something was seriously wrong it would have made loud obnoxious sounds while you tried to start up.
    Aside from Installation issues, you should reset the PRAM as noted previously. Hold down command-option-p-r at startup until it chimes twice.
    OP, looking at Super Talent's website they don't even have 1066MHz chips listed in their DDR3 chips. All I see is a jump from 800MHz (DDR2) to 1333MHz (DDR3).
    Either way, I can't imagine you got that great a deal for the RAM that even if it is seemingly the correct RAM you can get better deals in the links I posted in my other post.

  • System does not automatically reconnect to wifi network after sleep/restart

    My iMac G4 (2GB RAM, 10.5.1, AirPort Extreme) does not automatically reconnect to my wife network after waking from sleep or restart. I just recently switched the iMac from a wired to wireless set-up though the machine has always had the AirPort card. In wired mode, it always automatically found the network.
    Network preferences have the "Ask to join new networks" checkbox selected. Below the checkbox it reads "Known networks will be joined automatically."
    My wireless router is Linksys WRT150N, security type is PSK and encryption method is AES key.
    Anyone have any suggestions?
    Thanks!
    bk

    I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

  • MacBook Air 11 2014 Wifi Issues After Sleep

    I know that people have reported their wifi taking a long time to establish a connection after sleep.  I thought I would test my brand new MacBook Air 11 2014 by closing the lid for several hours to see what happens.  When I opened the lid, the wifi signal was full and not greyed out like other people have reported.  However, my internet was dead.  Could not connect to websites or find my iTunes library on my other Mac.  In order to get it working again I have to switch the wifi off, then back on again.  I'm not 100% sure why I am reporting this as it seems to be a big issue with Mavericks.  Its just the majority have reported the wifi logo being greyed out and taking a long time to find its corresponding network.

    Hi Daz1761,
    This article has information about what you should do if your MacBook Air wakes from sleep and looses wifi connection -
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • G3 PB freezes after sleep

    I've got a G3 series Powerbook, either 1st or 2nd gen, don't know which.
    It has OS 9.2.2 installed on a 2 gb HD, 256 megs RAM.
    It has this funny habit of freezing when you wake it up after sleeping, even for a moment. I've tried starting with just the base OS active, and it still happens, so it seems it's not a problem with extensions or conflicts.
    It also quits the Finder and restarts, then freezes after a moment when you eject the wireless card.
    Also, the drive has only 78 megs free.
    Any thoughts on what might be the cause/solution for this?
    Thanks

    Hi, Brett -
    Make sure that there is a folder named Multiprocessing in the Extensions folder (in System Folder), and that that folder contains the file named Apple CPU Plugins. The absence of that can cause wake-from-sleep problems -
    Article #TA22088 - Mac OS: Do Not Remove Multiprocessing Folder
    If that folder is missing, it can be easily replaced without installing any software - insert an OS 9.2.1 Install CD (do not boot to the CD), then go into the System Folder on that CD and copy the Multiprocessing folder from within its Extensions folder to the proper location on your hard drive.
    Other possible causes -
    • There are some issues linked to the version of CD/DVD Driver extension and an Iomega Driver extension; these can also affect sleep.
    http://discussions.apple.com/thread.jspa?threadID=121946
    • In some configs the extension named InputSprocket Extension can cause some conflicts with 3rd-party USB extensions. Testing for such conflicts (such as by disabling the InputSprocket Extension temporarily) can reveal whether they may be at play.

  • Yoga Tablet 2 1050F Android 5 and first freeze after sleep....

    I dont believe. Problem return with new update for 5.0

    Lenovo is investigating customer reports that after upgrading a Yoga Tablet 2 8 830 or 10 1050 to Android 5.0.1 Lollipop, the tablet freezes in sleep mode and will not awaken when tapping the power button.
    Two known workarounds: hold the power button down for 60+ seconds until the tablet recovers, or unplug the tablet from AC power and wait several days for the battery to drain, then plug it in and it may recover.
    It would help the investigation if several customers would be willing to provide logs capturing this failure event for Yoga Tablet 2 8 or 10 1050 models. This would require starting the log collection before putting the tablet into sleep mode.
    To capture logs, please follow this procedure: http://support.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-830/documents/HT103449
    Once you have collected the logs, please zip the files and attach them to an email which can then be sent to [email protected] If the file is too large to send, please provide a link to the hosted file.
    With the email, please include the following information:
    Name:
    Forums User ID:
    Model: 
    S/N:
    Discussion Link: https://forums.lenovo.com/t5/Android-Yoga-Series-Tablets/Yoga-Tablet-2-Lollipop-Update-MicroSD-Card-...
    A description of the failure and any other information you would like to share:
    Zipped attachment or link to hosted file:
    Once I receive customer logs, I will open a case to escalate these reports for a solution.
    Thank you,

  • Mac Pro freezes after sleep, wont shut down, and 5870 issue

    Hi,
    I just got my new Mac Pro 3.33Ghz hexacore a couple of days ago and I've been having some issues with it.
    1) When waking up the comp from sleep and its been cold for a while, the Mac Pro freezes. I can still move the mouse but that's about it. So, I have to do a hard restart. But...
    2) Since last night I'm not able to turn the MP off. When I try to shut it down from the menu it closes all the apps and nothing but the background and dock shows and it gets stuck there. So I have to do a hard restart, but when pressing down the power button it just goes to sleep rather then shutting down, so only way to turn it off is to pull out the cord.
    3) And the last problem I'm having is in bootcamp. When I play games (Battlefield Bad Company 2 or Crysis) the computer freezes after 3 min or so. The screen either turns blue or black and I have to shut it down. I am able to do the hard restart in Windows 7, in fact I just have to press the power button ones and it shuts off correctly.
    I'm really frustrated since in the last 2 months I've had 3 iMacs and this MP and all have had problems. My old 20in iMac has been running for a couple of years now and has never had any problem...
    Also, if I have to take it to the Apple store, is there anyway a tech can come to my house? I'm tired of going to the Apple store all the time, its a big hassle taking the comp there, plus I don't feel like they're really helping me.
    Thanks for your help!

    just wanted to update you guys on what the official stance of OWC is on this situation. I had the same problem like you guys. I have the 240GB OWC extreme pro SSD in my Mac Pro 3,1. When it goes to sleep, and i leave it sleeping for a day -- upon returning, it will freeze up with the spinning wheel of death.
    This is what they had to say about it:
    "While Sleep will work with our SSDs, there have been reports of system hangs in relation to hibernation mode which is the deep state of Sleep. We suggest not using ANY program that puts your computer into hibernation mode when using an SSD. SandForce is working on this issue and it will be addressed in a future firmware update.
    Normal, automatic sleep mode functions perfectly with no issues. But if you need to try and fix the hibernation issue with your Mac revision, please Open up Terminal (Applications>Utilities>Terminal) and go through the following steps:
    Type: sudo pmset hibernatemode 0
    Press: return/enter.
    Type: your password when it prompts you to, then press return/enter again.
    You have successfully disabled hibernation! Go ahead and exit Terminal.
    Also, some have chose to use the application SmartSleep, which is free online. http://www.macupdate.com/app/mac/26979/smartsleep
    SmartSleep is an application that you can use to set the hibernation mode on your computer.
    I apologize for the inconvenience. I sincerely appreciate your patience and understanding in this matter and hope you will continue to bear with us as our extreme SSD product line transitions through these evolutions and unforeseen road bumps. Please let us know if there's anything else we may do to help."
    --I would like to add that the OWC SSD is great. And since Downloading smart sleep and disabling deep sleep aka hibernate, the issue has been totally resolved. Im pretty sure the terminal entry works just as well. But I liked the added convenience of the other features of smartsleep. So there you go guys.

  • TS4209 Macbook Air with OS X 10.8.2 not automatically connecting to known wifi network after sleep

    Macbook Air with OS X 10.8.2 not automatically connecting to known wifi network after sleep

    If you are using WEP as a security on your router that is why it won't connect. WEP is so old school and very insecure that Apple has made it so there WiFi cards won't connect to WEP. It might as well be wide open. You can try that. Take all security, WEP/WPA/WPA2, off your router and see if it connects.
    If it does then use either WPA or better WPA2.

Maybe you are looking for

  • How to copy standard SAP report to a Z report?

    Hi All, Guys, I have a requirement to copy an standard SAP report and make some changes to it. Please let me know how to copy a standard SAP report as a Z report. Is there any simple way or will I have to open the source code and copy it into the new

  • Importing entire photo library from Photoshop.

    The Photoshop library is organized in the traditional manner of folders, sub-folders, files, etc using Bridge. How do I import this entire structure into Aperture 3 while preserving the hierarchy? Can I do this in more or less one move or must I rebu

  • How can I activate Indesign CS2 Dutch?

    I contacted the helpdesk and they gave me a link to a workaround. On that page I can choose English version, when I select this I see a link to Indesign CS2 among others. But I need the Dutch (Nederlands) version; when I choose Dutch, I can only down

  • On ebay, I cannot make photos on the auctions larger

    When I go to an auction on eBay, and I want to expand a photo to a larger size, in Firefox the photo will not expand or get larger. If I use internet explorer it works fine. This has just happened since I updated to the latest version of FireFox.

  • My crop tool doesn't work

    I need to crop a bit of the bottom off of my short video clip. I dragged the clip into the timeline, selected it, and selected my crop tool. The rightmost viewing window takes on the turquoise border, but there is no "crosshairs" or "x" through the c