Lumia 720 image size reduced

When I got my Lumia 720 still running on WP 8.1 Preview For Developer (pre-cyan), I took a picture with primary camera and Lumia Camera app, the size was about 2,3 mb. Now I got Lumia 720 upgraded to Lumia Cyan and Preview For Developer (pre-denim), I took a picture again and realized the size was just 700 kb. Can anyone tell me which version of OS that brings this change, or it is because an upgrade on lumia camera apps itself?

Microsoft didn't release the sw to the general public, you must have signed up to the developer preview to get it, in which case you would have accepted notices that it's not yet a commercial release.
Size of the file is not necessarily an issue, it could be that they have improved image optimisation, jpg files saved by late Symbian phones were smaller than Windows Phone images have been. If the dimensions of the image in pixels is the same and there is no drop in quality then you have nothing to worry about.
You might want to check in the camera app's settings in case it is set to a lower resolution than before, in which case you can increase to the desired setting.

Similar Messages

How can I set up a repeatable bulk image size reducer?

How can I set up a repeatable bulk image size reducer?

File > Scripts > Image processor. It's pretty straight forward.
Although I used the free Irfanview for many years.

Lumia-720 system size increasing

My Nokia Lumia-720 phone has windows-8.1 installed, initially system(OS) size was 2.75 GB out of the total phone memory of 8 GB . but after few days I could see that system (setting->system) has occupied 3.06 MB; and it is keep on increasing everyday. I am already having micro SD card of 16 GB for any app, photos, download etc in the phone.
I cleared the temp files, internet browser data from the phone but no change.
Can anyone pls suggest/provide solution for this issue?

Hi @ijaz144 ,
The only 'solution' when the phone is out of free space is a factory reset through Settings > About > Reset my phone.
Backup everything first, local documents and full-resolution photos and videos etc.
This is only relevant when the phone is actually out of free space and displays a warning - it is not relevant when the free space fluctuates and show some megabyte less than yesterday, with gigabytes of free space still.
The main concern and the only long-term solution is to investigate which apps store data on the phone. It only takes one bad behaving video or radio streaming app to fill up the phone storage over time - and not recover the free space even when uninstalling the app. Been there, done that, avoid installing the particular apps now.
Hans

Does reducing image size reduce image quality?

i 'm new to AI and also to this forum.
I know that enlarging and image can reduce image quality.
I'd like to know if reducing the image size (not in pixels, but in actual size),
will reduce the quality?
i have a Ai file that's 600x300, and need to reduce it to 300x120 my websie.
Before I convert it to a web format, I want to reduce this large Ai file to 300x120.
Will i still lose quality even if it's still an Ai file, before converting to web format???
thanks!!!!!

No it is however best to use save for the web to do so for the best optimization.
keep in mind the only lose in quality will be if some one grabbed it off of the website and tried to enlarge it or view it at a larger display size.
What you want to do is the best way of reducing the size.

Publisher image size reduced upon pdf conversion

Last week I submitted a Publisher file of an advertisement for pdf conversion. When I opened the pdf and printed it out, the ad which had been, let's say, 4x7 inches, printed out about a quarter inch smaller in both width and height. When I e-mail it to the magazine publisher, how do they make the image fit the correct ad space? And how can I prevent this change in size next time?

Check your print settings in Adobe Reader. Make sure have page
scaling: none.
Aandi Inston

Reduce image size and print it out?

I scanned an image (coloring on a postcard). This size is too big to fit into a 'album' picture in MS Picture It! All I want to do is REDUCE the image and save it so that it will fit into the computer photo album I'm creating.
I've tried Image/Resize/Image Size and changed the sizing, but it still comes out the exact same size as the original. What am I doing wrong?

> I want to REDUCE the image, not enlarge it.
I understood that - what makes you think I didn't?
> It's 948x645 pixels. I just want the image about an inch (respectively) smaller
You can't think in terms of inches for screen images. You have to work in pixels and the actual size will depend upon the screen resolution on the machine being used to view the image.
I'd reduce the pixel size by about 80 to get the effect that you want. Use Image/Resize/Image Size and make sure that you have "Resample" checked.

Lightroom 1.4.1: Reducing File/Image Size for Web/E-Mail

This should be a simple thing.
I need to reduce my file size to upload it into various things on the web and e-mail and what not. Sometimes it asks for a specific size.
Right now, I'm using the Export function to do this, which means I have to reset the Image Settings each time in order to get to the size required.
Isn't there and easier way to do this, like just type in the image size you want and have the program reset the image proportionately?
Is there a ratio chart for this, like 1000 x 1400 = # of bytes?
This is a function used all the time--I can't believe it's this cumbersome.

Banktank wrote:
(a) How do I know I am selecting the correct pixel size for e-mail? Just keep hunting and pecking until I find the right mix or is there a number combination that works consistently? And if the latter is correct, what is that number combination.
I just can't believe that reducing the MP size to get it in shape for an e-mail "thumbprint" photo is this tough. Even with the 'preset', I'd have to set up a preset for every picture because they vary by MP and the scaling seems to change.
There is no "standard" size for sending images via email. Just make it small. There is a save for email preset in recent releases of Lr. You can download the demo and see what that entails.
You don't have to create a preset for each picture. I don't know what you would say that. Yes, the amount it compress varies with the information in the image, but this has always been the case with JPEGs. You don't have to make an image that is exactly some size. You just have to make it small enough for most MTAs and MUAs to handle. Since there is no real standard for this, just make it small enough for you.
Something like 800px on the longest side, 70-80% quality should do it to find the JPEG compression sweet-spot.

Do I need to reduce the images size in pixels before upload them to M.Me?

Do I need to reduce the images size in pixels (actual size jpeg 5616 × 3744 pixels/766kb) before upload them from iPhoto to a Mobile Me Gallery?
Otherwise they will be heavy or the upload process take care of that?
It would be nice that iPhoto took care and optimize the images to display online without any more work, because I´ve 1200 images to upload and they´re jpegs 5616 × 3744 pixels. It´s just to viewing purposes. Not o download or print.
Thanks.

In fact no matter if I use a High or Medium compression size JPEG, the size after upload is the same.
Starts with 1,5 MB/5600px (high) or 780kb/5600px (medium) JPEG and ends after upload in 115kb for a 1024px image.
This means that iPhoto auto compress in order to publish to Mobile Me, even if we start with a bigger file.
I hope this info is useful to others.
Thanks.

How to Reduce Image Size and show upload Progress Bar

i need to capture an image from the camera and send it to the server. however to reduce the amount of data transmitted i want to shrink the image and lower its resolution.
I have code that currently does the following :
UIImage *testImage = [UIImage imageNamed:@"image1.png"]; // this would come from image picker
NSData * imageData = UIImagePNGRepresentation(testImage);
// skipped code that showed URL string setup
NSString *postLength = [NSString stringWithFormat:@"%d", [imageData length]];
NSMutableURLRequest *request = [[[NSMutableURLRequest alloc] init] autorelease];
[request setURL:[NSURL URLWithString:urlString]];
[request setHTTPMethod:@"POST"];
[request setValue:postLength forHTTPHeaderField:@"Content-Length"];
[request setHTTPBody:imageData];
NSURLConnection *conn=[[NSURLConnection alloc] initWithRequest:request delegate:self];
1. need some way to shrink the image size to reduce data traffic
2. need some way to indicate a progress bar as data is being transfered to the server

1. The size is visible in the metadata panel, set the dropdown to EXIF. In addition, in the Grid, with Ctrl-J, you can set the options so that you will see the cropped size in the rectangle surrounding the photo.
2. You cannot, in one action, upload to multiple galleries. Each upload is its own action. I don't know if there is a plug-in to let you upload from LR to 500px in one action; clearly there are plug-ins for Flickr and Smugmug and several others. There should be no need to re-import. Normally, the plug-ins I mentioned will take a TIFF, resize it according to your directions, convert to JPG and upload.

How to reduce image size

Hi All,
I am reading a tiff file using JAI,By looping the tiff file ,Each page of tiff file , i am storing each page into BufferedImage ,then i am storing it as a PNG file (each page of a tiff file).
Tiff file is of size 2000X3000 pixels (app).
PNG images are also of same size.
now i want to read the png images and display it as a Button image,
Problem is i want to reduce the size of a PNG image which is of 2000X3000 pixels to 150X200 pixels
How can i do it
Please help me out .
here is my piece of code
            File file = new File("filelocationf");
            SeekableStream s = new FileSeekableStream(file);
            TIFFDecodeParam param = null;
            ImageDecoder dec = ImageCodec.createImageDecoder("tiff", s, param);
            nopages=dec.getNumPages();
            for(int i=0;i<nopages;i++)
                RenderedImage op = dec.decodeAsRenderedImage(i);
                PlanarImage opi = new NullOpImage(dec.decodeAsRenderedImage(i),null,OpImage.OP_IO_BOUND,null);
                image=new BufferedImage(op.getWidth(),op.getHeight(),BufferedImage.TYPE_INT_ARGB);
                image = opi.getAsBufferedImage();
                ImageIO.write(image,"PNG",new File(fname+".PNG"));
           }Thank u all.

Thank u Very much for ur reply
i.e want i want .
but
how to save a image by reducing its size.
means
ImageIO.write(image,"PNG",new File("filename".PNG"));
{code}
the above line of code will create png image of BufferedImage size.
is it possible to reduce the BufferedImage size befor we write it.
and also tutorial link abt "g.drawImage();" method
Thank u All.

Scanning: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.

Good Day.
I have recently discovered an issue with scanning. I have tried scanning straight from the printer, through image capture, and through preview. All yeilding the same results since they are essentailly kicking off the same scanning applet. I can scan a jpeg formatted file as long as I applet is in the "Hide Details" mode. If I click on the "Show Details" button, which I need to do to scan to PDF, I immediately receive an error stating: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.
I'm currently using an HP C5180 printer.   The most recently installed software was Adobe Digital Editions (I installed this to read an on-line e-book). Not sure if there is any correlation.    Thanks for any help.
Mac details are:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i5
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27
Printer access log:
Source:          /var/log/cups/access_log
Size:          174 bytes
Last Modified:          11/21/12 10:09 PM
Recent Contents:          localhost - - [21/Nov/2012:22:09:16 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
localhost - - [21/Nov/2012:22:09:20 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
Image Capture Support:
Image Capture Support:
Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Info.plist
Version:          2.3.0
Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Resources/Dev iceInfo.plist
Version:          2.3.0
Photosmart C5100 series:
Status:          Idle
Print Server:          Local
Driver Version:          4.0.0
Default:          Yes
Shared:          No
URI:          dnssd://Photosmart%20C5100%20series%20%5B960B9E%5D._pdl-datastream._tcp.lo cal./?bidi
PPD:          HP Photosmart C5100 series
PPD File Version:          4.0.0
PostScript Version:          (3011.104) 0
CUPS Version:          1.6svn (cups-327)
Scanning support:          Yes
Scanning app (bundleID path):          -
Scanning app version:          -
Scanner UUID:          CC8DD435-CC8D-D435-CC8D-D435CC8DD435
Printer Commands:          ReportLevels
CUPS filters:
Inkjet:
Path:          /Library/Printers/hp/cups/Inkjet.driver/Contents/MacOS/Inkjet
Permissions:          rwxr-xr-x
Version:          4.0.0
commandtohp:
Path:          /Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/comman dtohp
Permissions:          rwxr-xr-x
Version:          2.1.1
Fax support:          No
Printer utility:          /Library/Printers/hp/Utilities/HP Utility.app
Printer utility version:          5.9.1
PDEs:
PDE.plugin:
Sandbox compliant:          Yes

Hello Sig
The scanner works with a Windows computer, which proves the device is functional at a cursory level. The drivers are now distributed by Apple and this is an Apple computer. There is no scanning software provided by HP. HP's answer is that Mountain Lion takes care of all of this. I anticipate that some setting or driver was somehow tweaked since the scanner had been working with Mountain Lion until a few days ago. The device in question is an Apple product. So, I'm pretty confident that I'm in the right place.
Regards

Optimize JPG image size reduction by reduced compression quality vs. reduced pixels?

I have many images of slides scanned at high res (4800 DPI, maximum pixels 5214x3592). Although I will be saving these as lossless TIFs, I also wish to make JPGs from them that I wish to be just less than 5 MB in file size. Aside from cropping, I know I can achieve such a reduction of JPG file size by a combination of saving to lower quality JPG compression or reducing image size. My question is, what is theoretically or practically better, achieving this mostly by reducing image total pixels or by reducing JPG compression quality. Thank you

Thank you Doug. The comments on extensive uniform blue sky vs. marked variation in color seem well taken, I'll keep this method of choosing in mind. My goal is to create a JPG family photo archive of the highest quality images that I can make for future use by non-technical descendants (thus it will supplement the TIF archive that holds the best quality versions of the same images but that may not be usable to novices). As I cannot anticipate exactly how the JPGs will be used, I just want them to be the best possible, while still being of a size that can be uploaded to, say, Costco (5 MB size limit) for making enlargements.
In general, I am often left curious as to how exactly Photoshop carries out its algorithms and how different factors influence the outcome. So often, one read "just try different techniques and see what looks the best". But I am always left wondering, what is the theory behind this and has it been systematically studied and worked out and published. In so many disciplines, such as medicine, the methods of optimization has been evaluated, systematized, and fully described. I have not yet explored what may be found in technical journals, but I'm sure much of this good stuff must be available somewhere. It would be nice to have a "How Things Work" that actually explains what Photoshop is doing under the hood.
Thanks again.

Question on Blu ray image size output and reducing the size

Hi
I have been using encore for blu ray projects which is been proving very helpful. However recently i have had a issue with output size on files. Normally Encore gives me it's estimate that it will fill the disc nicely and provides a image/folder which is about 17-20GB (using 25GB disc) but now out of the blue it's files sizes it outputs has been 24.8GB which technically is less than 25GB but as anyone knows who burns to media, the disc doesn't actually have 25GB of space (something like 23,8 or something, i can't remember without checking). Anyway of course this is a issue because my output size is contantly now coming up to be about 600MB - 1GB over the disc actual size, i figured Encore normally compresses files to fit considering i have burned similar amounts/size media before and never had a issue.
Anyway my issue is the slightly larger file size, i figured the easiest way to reduce the blu ray output size was to of course play with the transcode settings, which usually are set to the default settings for Blu ray (the quality preset is called something like "1280x720p 50 High Quality MPEG-2") so of course i thought to lower the bitrate a little just for a test, so i did just that and cut the default bit rate from 25[Mbs] to 20, i didn't want to lower it too much as it was a test to see what i could save for file size. Anyway so i re-transcoded the file and built another image, sadly the image size oddly enough came out as 26.something GB... so it actually grew in size by reducing the file bitrate which put me at a loss. I was wondering what common ways i could use to lower this file size just by a few hundred MB or up to 1GB in this case without having to remove content from the disc (it would be a waste to not only seperate the content but to use a whole disc for a leftover 600mb-1gb project). I of course want to keep quality as high as possible but i understand when trying to reduce size quality has to normally be hit in these situations so i can deal with a slight loss of quality. I have been browsing the forums here and though some topics seem similar they have the issue of file sizes coming out as 40GB+.
Now im no genius with Encore, normally as said the file size is always between 17-20GB as i figure encore was using a "fit to disc" type feature but because the output size is technically below 25gb but not actually below enough to burn i was wondering 2 things:
1) is it possible to make encore it's self shrink these files a little more, lowering the target size down by 1GB would do wonders but only option i have seen is to have a 25GB disc or DL disc with no option to customize the output size (forcefully lowering it by 1GB).
2) because i imagine the above can't be done i was wondering how to go about reducing the size by around 1GB or so, i don't need like 10GB freeing up so it's only a small amount, as said this is a issue i have had with the last few projects i made and the size varies from needing 600MB - 1GB (it doesn't usually exceed needing 1GB free space... besides when i lowered the bit rate which increased size a lot). In the past i always just cut the bitrate of files down a little (never by lots but enough to free space up) but clearly that failed my test so im at a loss of how to reduce file size without a huge loss in quality.
For the record i have already produced the file as both a image file and a folder and both have the same issue.
Extra info on the project:
It contains 4 Menu's, 13 video files which vary in lengh from short ones at about 5mintues to longer ones which the largest is about 20minutes. I commonly burn this number of video files/space with fine quality and no issue so i would rather not take files from the project.
quality preset details are defaultly as said above set to "1280x720p 50 High quality MPEG-2" settings, i am not on my computer with encore at the moment so i can't post full specifics right now but if you have encore handy you should be able to check.
Tried reducing bit rate but that increased overall size, the actual plan was to hopefully lower the bit rate to around 21 [mbs] (from 25) and then do that for multiple (or all) files until it fitted but after it increased the size i lost hope there, it said the estimated file size (on the individual video) would drop by around 300-400mb but that didn't work.
I have tried both folder and iso which always come out the same size.
Basically my main question/problem is any suggestion to drop the file size by up to 1GB without taking items out the project or a real high loss in quality (i don't mind small loss though as i can apply whatever solution to all files which should help).
Any suggestions what i can try? as you probably gather im not a genius when it comes to this stuff but i tried including what i thought is relevent.

Hi and thank you for the reply;
one problem i seem to be having when reducing the bitrate is the file size is oddly increasing from 24.8GB to 26.4GB, i can't really figure this one out as well it's having the oppisite effect. I checked the "streams" folder on output and decided to compare automatic transcoding to manual lowered bitrate and im not too sure where the increased file size is going, i found which video file it was causing the issue, all videos files range or average around 1.6GB each but one file was taking 4.5GB, after lowering that files bitrate it cut it down to 2GB which was of course saving me 2GB from the old file but the overall size had increased which was odd. Seems the other files are all the same so it hasn't tried improving them (so it seems) so i can't make ends of why the size is increasing.
I will try playing with the source file to see if i can do anything that way, if not i will try transcoding in premiere (i have had troubles with this before so i try to avoid it).
Oh and yes i was using Automatic.
Anyway i will see if editing the file outside might help first and see how that works. Thanks again for the reply.

Reduce image size ( un-enlarge )

I have a digital image of a house. I want to make a Christmas tree ornament that will have a picture of just the front door. The door in a 4x6 print is about 3x4. I want to reduce that to about 2x3. I am only able to print on 4x6 paper, so I want to reduce the image size then print a 4x6 which would orobably have a large white border.
How can I do this?

Cliff
1. Open picture file
2. Access rectangular marquee tool. In the options bar, select mode:fixed size, enter w=2", h=3". Position the box with the "marching ants" to include the door.
3. Go to Image>crop
4. Go to Edit>copy. This puts the door on the clipboard.
5. Open a new blank file, background white, 4X6", the size of your paper stock, and set resolution the same as that of the picture. Note that for printing it is desirable to have a resolution of 240-300px/in
6. Go to Edit>paste
The parameters in step #2 can be refined to reflect the actual door size.
If you want to have a background other than white, you certainly can to this. In step #5, you can select the foreground color of your choice. Just set the foreground color chip (lower left) to the desired color.
It is also possible to paste the selection on to a texture background, etc.
HTH. Let us know how you make out.
Ken

Camera raw reducing image size

All of a sudden Camera Raw is automatically reducing my image sizes. I cannot figure out why. The images were shot with a Nikon 5100 if that has any value.
The original jpg size is 15MB (jpg) and have a NEF extension.
I've tried opening the image in Photoshop and then going through Bridge to Camera Raw, and opening the image through Bridge to Photoshop and the image gets reduced from 16 inches to 5 inches keeping 300 dpi.
Thanks in advance.!

The only important “image size” is pixel dimensions.
JPGs have a JPG extension. An NEF extension means it’s a raw file.
Things that affect DPI/PPI and pixel dimensions are in the workflow options link at the bottom of the main ACR window, and only if you output the images to some other format in ACR.

Lumia 720 image size reduced

Similar Messages

Maybe you are looking for