Lumia 720 Low Audio Volume and % consumption on li...

Lumia 720 has low volume when nokia ear phones are used. At 15 volume without the ear phones attached the sound is great and loud but when they are connected I need to increase the volume to 25!
And also when I listen to music my battey drops 1% per song why is that?

Hi Aseem186,
Built-in speakers and earphones has a lot of differences when it comes to loudness. It is normal that the speaker is much louder than the earphones. However, the earphones can provide you a great sound quality as it has stereotyped sound.
About your concern about the battery life when playing music, do you have open apps other than the music player? Are you connected to Wi-Fi or is your phone's Bluetooth enabled? 

Similar Messages

  • Lumia 720 - Defective Audio Jack and Random Reboot...

    I purchased a Lumia 720 from Amazon.com in the US. After about a month, sound was only coming from one headphone. I thought it just might have been my headphones, but then I tried them in a friends phone and they worked fine. Other headphones didn't work either unless it was over Bluetooth. I have also been experiencing freezing and random reboots. A friends factory reset it for me several times and the issues still persist.
    I need to send it in for repair; I did verify that it is in-warranty.

    this is mainly a user to user forum only for Nokia products and services, so we are of limited assistance to you here unfortunately. in this case, all we can do is direct you to your nearest Nokia Care location for inspection, if there is none nearby, then try contacting Nokia head office in your country of residence.

  • Low audio volume in DVD SP

    I've been experiencing low audio volume with burned DVDs in DVD SP 4.
    The audio volume is fine in FCP, and also in the self-contained exported QT file.
    But once imported into DVD SP and burned to a DVD, the volume is almost cut in half on multiple projects. The DVD's are short (< 30 minutes) so the audio is left as an AIFF file rather than converting it to an .ac3 with Compressor.
    I don't see any way to control the volume in DVD SP.
    Any ideas?
    Thanks,
    Richard<br>
    G5 dual 2 gig   Mac OS X (10.4.7)   4.5 Gigs Ram

    There's no way to control volume in DVDSP.
    I had the same problem, but I had an ac3 file through Compressor. And there was this feature in it called "dialog normalization" that I had to turn off (setting it at -31dB), and my levels were good.
    If you can't solve your problem with AIFF, maybe try ac3, and see if it suits you.

  • The Volume on my Mac pro is not working. I can't raise or lower the volume and sometimes it mutes by itself. additionally, the speaker button on the top right is garbed out.

    The Volume on my Mac pro is not working. I can't raise or lower the volume and sometimes it mutes by itself. additionally, the speaker button on the top right is garbed out.

    Hi there profreak,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    -Griff W. 

  • Camileo X400 camera - low audio volume

    Hi
    I hope someone can point me in the right direction. I recently purchased the cameo x400 and when I upload it to face book the audio volume is really low.
    I am using a new lapel clip mike which I have tried on other audio devices so that is not at fault. Is there something in the settings etc that I need to change when using the mike or can I edit it to increase the volumeon the software provided.
    Many thanks
    Ian

    Did you check the user manual of Camileo X400?
    I recommend doing this.
    Unfortunately it looks like the microphone volume isnt changeable.
    Only the menu sound can be changed. This option can be found in Setup menu.

  • Lumia 720 pixel row problem and warranty

    Hello,
    I have a 6 month Lumia 720 that has developed a problem in which a complete vertical row of pixels doesn't work in blue, green, yelloow, and other background colors.
    I took it for warranty and they told me that they must exchange it for a new unit but they don't have 720's in stock.
    THEY WANT TO GIVE ME SOMETHING LOWER THAN EVEN A LUMIA 630, I consider that totally unfair, given that even the 630 is a total downgrade.
    How can that be possible? What can I do?

    This is a user to user forum so we cannot help you directly in any way. You need to take it up further with Microsoft Mobile support in your country.

  • What is the difference between audio volume and audio loudness?

    Hi to all,
    While trying to pep up sound levels to my audio clip, I found these two parameters which could enhance the sound levels...volume and loudness. Can anyone please tell me the difference between these two?

    I clicked on the triangle at the left edge of the audio clip and went into the audio enhancement window where loudness parameter can be adjusted. Clicking the 'go back' button at the top left edge of this panel gets you to the audio panel where you can adjust the volume, pan etc. [dunno what panning means]!
    Yea, I too thought that these two meant the same before I observed these two options.

  • Lumia 720 getting zoomed in and hanging

    After. Using Lumia 720 sometimes it gets zoomed in and then u have to switch off and on again .

    Go to settings-->ease of access and set 'Screen Magnifier' to OFF

  • Bounce from Ultrabeat and Lower Audio Volume

    Hi,
    I have noticed that when I create an Ultrabeat pattern, drag it into the arrange window, and bounce to audio that my volume level is MUCH lower when IMPORT the bounced file back into an audio track......why?.....how do I solve?
    My Ultrabeat pattern is pumping out good levels on the fader .......the audio file ...on import has almost no level .....when I overdrive the Ultrabeat pattern I get good audio levels but they are distorted...hmmmmm
    Any suggestions would be appreciated!
    MacPro
    Apogee Ensemble
    Mackie Big Knob
    NHT Pro Monitors
    MacPro   Mac OS X (10.4.9)   2 GB Ram

    what is the level of the master fader or (i assume) outputs 1-2?
    When you play Ultrabeat is the level good at outputs 1-2?

  • HP G72 Low audio volume

    I just purchased an HP G72-227WM laptop. I had high hopes for the audio system when the description mentioned Altec. I am highly disappointed! If there is ANY noise in the room, I have to turn the volume all the way up to be able to hear it at all. Is anyone familiar with this? Is there any kind of fix for this that anyone is aware of? (besides an external powered sound system) Or is this just the nature of the beast?

    I have had the same problem and many others.  The touchpad has a mind of its own as well.  I am EXTREMELY disappointed with this purchase and wish I could return it to be honest. 
    Has anyone found a solution to the sound issue?  or the touchpad issue for that matter?

  • Low audio volume rendering?

    Hello, and sorry in advance for my English.
    In After Effects CC, while I'm editing, I listen the sound correctly (RAM preview). The problem is, when I render the project, the sound is lower. I don't use any codecs... I don't know what's the problem.
    Thanks in advance.

    You are using an old version of AE. The latest version of CC is 12.2.1.5 and the latest version of After Effects is 13.2.0.49
    You might consider updating your current version and you might consider using the new version as well.
    How are you checking the volume? Do you bring that AVI back into AE and compare it with the composition?
    Does this happen on every project or just one? Try bringing just one WAV file into AE, rendering it out, bringing it back in and comparing it.

  • Low audio volume l755d-s5204 toshiba

    i bought l755d-s5204 about 2 months ago and the external speakers  volume  is at 100% and they still sounds low  any suggestions? i also bought my wife a dell and the speakers on the dell are twice as loud as my toshibas.

    Do you use any anti-virus or anti-malware programs? If so, are they actively scanning when this happens?
    Regardless, try disabling them and then see if the problem still occurs.
    If you don't have any installed, you might want to install an anti-virus program, update it, and then do a full scan to make sure you don't have a virus.
    What have you installed since you purchased the computer? You could also use the search box in the Start Menu to search of "msconfig" and launch the application. In the "Startup" tab you'll see a list of programs that start when Windows starts. You could try disabling some of them to see if it helps. Make sure to make a note of whatever you disable so you can re-enable them later. Keep anything by Intel, AMD, or Toshiba for now.
    - Peter

  • Low Audio Volume

    It seems that the the volume from the speakers is much lower than it was when I first received my x100e. I have checked every possible setting (I think) and can't find an answer. Has anyone else had this problem?

    There's no way to control volume in DVDSP.
    I had the same problem, but I had an ac3 file through Compressor. And there was this feature in it called "dialog normalization" that I had to turn off (setting it at -31dB), and my levels were good.
    If you can't solve your problem with AIFF, maybe try ac3, and see if it suits you.

  • Nokai Lumia 720 Suddenly went blank and switched o...

    I bought nokia lumia one month back, Suddenly my phone went blank one day and it turnd on automaticcaly, and now my voulme down key is not functioning. what shall i do, shall i goto Nokia care and exchage for a new one?
    Solved!
    Go to Solution.

    Try Hold volume down and the power button until the device reboots.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Audio volume and mouse scroll wheel-WMM inferior to 3rd party?

    Whenever I can't use my Wireless Mighty Mouse (maybe I forgot it at home etc.) I try to use other mice lying around from bygone eras.
    When I end up using a 3rd party bluetooth mouse, say a Kensington, or even a Microsoft, I notice that I can click on the Volume menulet on the menu bar at the top right of my OS screen, and with the volume bar expanded downwards I can then use the scroll wheel to adjust the volume.
    When I use the Apple mouse and its scroll ball nothing happens. I have to actually click and drag the volume slider, a much more precision demanding exercise.
    What gives? How come the mouse driver for a Kensington/Microsoft allows something the Apple's own seems to ignore? Is there some Terminal tweak I could do to enable this behavior on the WMM?
    Many thanks, as always, people.

    the mouse works fine doing all the other things. well, i dunno, how changing USB would make any difference. Though I did try that, with no effect.
    i have a PS/2 mouse & keyboard connected with a PS/2-USB adapter.
    And *sometimes the scroll wheel does work*, & then suddenly stops doing what its supposed to do!!??

Maybe you are looking for

  • Can we control order of cycling when use same access key in multiple locations

    Hi, I'm using Jdev 11.1.1.6, IE 9, Firefox 24.0. I have created simple jspx page having two buttons, named Add and Close. Close button has got access key as C. When click on Add button I'm calling a <af:popup> and that popup contains two buttons Subm

  • Iphone 3g keeps getting temperature message.

    The phone has been getting the temperature message for 2 days now and it wont let me use is, it will only give me the option of making an emergency call. I have tried leaving it alone to "cool off" but nothing works. I also tried restoring it on my c

  • Currency format in ExcelSheet

    Hi All.. i am genrating my reports in Excel using : response.setContentType("application/vnd.ms-excel"); and my report is also consisting of amount cloumn... And now the problem is,i want to get the amounts in the currency format... Eg :- if it is 10

  • How to transport a simple BEX query ?

    Hi guys We have a new BI system. And i am trying to transport a Query from DEV to QA. I believe transporting query is slightly different from transporting other BI Objects like cube DTP etc.. Can some one tell me how to do this? right now i goto the

  • Howto  developed an interactive form using Adobe LifeCycle Designer

    how to developed an interactive form using Adobe LifeCycle Designer