Lumia 800 does not switch on after hard reset

I did a hard reset the phone, when he was switched on.
He switch off. Now it cannot be switched on.
What would break? Hardware or Software?
Attachments:
Howtohardresetwindowsphone1_thumb.jpg ‏84 KB

Hi SoldovskijBB,
If the phone doesnt switch on after the hard reset, try to connect the device to Zune and see if it makes a difference. If not, itll be best to visit a local care centre where the phone can be checked. Have a look here to find your nearest care centre: http://europe.nokia.com/support/repair-and-recycle/repair/care-points
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Similar Messages

Display of Satellite A200 does not switch on after 15 min inactivity!

Hello!
I have just purchased a Satellite A200 1-AX PSA6 and install Windows XP SP2 + upgrade bios for winxp.
After 15 munutes of unactivirty (not pressing any keys or mouse move) I'm set in Power options in control panel - what Display must power OFF.
After this time display is switches off (black)!
But I'm can't wake up my notebook!
I'm press any key or move mouse, but display is still black!
But notebook work!
I can ping then by network or connect by remote acceess!
One way to solve this problem:
Close and open notebook!
A200 - in sleep mode and wake up with swithches ON display....

Hello
It seems that WXP does not work perfectly on new Vista designed notebooks. Before you live your notebook try to change profile in power settings (long battery life) and test the settings with this profile.
Tomorrow I will try to install WXP on my A200 and I am really interesting if I will notice the same.

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

HT201412 iPad screen does not respond, even after several resets (both with iTunes and at the Apple Store). Apple is also unresponsive to a hardware problem once the product warranty period has expired. Does anyone have a suggestion?

It is getting very frustrating to have Apple products.
Constant software upgrades and product releases seems to be the sole focus of Apple.
Apple does not offer hardware repair services. I can understand this policy when products do not fail. But it seems that this is not the case with Apple, as it becomes frequent that products fail just after the warranty period.
New software releases also destroyed the value of a "GREAT EXPERIENCE". YouTube, Google Maps, ... all features that are deleted with the latest IOS and that Apple could not properly replace.
It seems that Apple products are not 'consummable' products but 'disposable' products.
Let's see how robust SAMSUNG tablets are

Apple has hardware repair services, on repairable hardware. Apple just doesn't repair iPads, from day one Apple has always replaced iPads, either under warranty or as a reduced cost out-of-warranty purchase.
The rest of your post is just a rant. Enjoy your Samsung products.

Touch screen in not working even after Hard Reset

My Palm Treo 750 stopped working and responding suddenly........i tried a soft rest which didn't worked i then tried hard reset but in both cases the device boots and screen pops up "Tap the Screen to Start The Device". However this is the point where my device hangs up even after resetting it several times. I have also downloaded reset software from the palm website but unfortunately it only runs/works from palm device. i have installed microsoft active sync from the palm CD and my device is detected and syncronized using USB cable which prbably shows it doesnot have a hardware issue.
Post relates to: Treo 750 (AT&T)

Remove any screen protecters or cases, then hard reset again. If the problem continues then it will need to be repaired or replaced.
Post relates to: None

ThinkCentre Edge 71, Power LED does not switch off

Since I have installed win7 64bit, the pc does not switch off after Power down command. For switch off i must hold the power button >10sec.
Thanks for Help.

Hello Walter,
Please update the BIOS which will resolve the issue.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9qjy36usa.exe
You may also try the Windows registry setting. Kindly be careful while editing windows registry.
Have a look at the following registry location (note that you need to invoke regedit.exe with administrative privileges in order to make any changes in this location) and ensure that the value ClearPageFileAtShutdown is set to 0 (if it is set to 1, change the value to 0).
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My ipod touch does not start up after resetting

my ipod does not turn on after I reset it. It shows an apple logo and flicker white screen until the battery goes dead.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

During audio messaging the send button does not switch to a microphone after selecting a contact

During audio messaging the send button does not switch to a microphone after selecting a contact

Actually, this problem is the same as the one described in your other thread, and should be fixed as well after following the procedure described there.

Battery after hard reset on Lumia 800

Hi
A few days ago i did a hard reset on my Lumia 800. Since that everything was great, the only reason why i did it, to restore the default settings. After that i updated the firmware to 12070 via Zune. Since that day, my phone doesn't really know how much percentages are left from the battery. Sometimes It's showing a consant value for a long time, then suddenly begins to drain, and after a few it stops. It often happens, that it shows a value, and after an hour it shows a higher value (in percentage) than beforehand.
Today I let It to discharge to 0%, and then i pluged it to the charger. When the phone turned on, it showed me 5%.
It's lifetime havent changed so spectacularly, but i guess its a bit shorter with the same usage.
Is this behaviour normal after hard reset?
Thanks

After update my lumia 800 is failing to recongnise earphone. It keeps playing music on speaker. If I restart my phone then for few mins it is playing music in earphone. But after few mins once again music playback is starting through speaker.
what should be the problem? will hard reset solve this problem? If yes, how to hard reset nokia lumia 800.
Thanks in adv,

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

Have you tried changing the order in Network Preferences pane?
Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
Hope this helps
PJRS

Plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my l

Re: plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my la
its not connecting y?i think its software got corrupted,i think i should charge it first with a battery charger and when apple logo appears i should connect with pc,but i dont know how 2 open the back cover and how 2 remove the battery,i phone battery is removable or not?i mean it is fiz or wot?

Recharge. Reset. Restore.

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

My Mac Pro does not switch off.

It worked before Lion. Installed 10.7 and also upgraded to 10.7.1 but, on both cases, it does not switch-off. To be precise it "sometimes" switch-off but many times it does not. Let's say once on 15 times... With Leopard I nevere had this problem. (it persists also after a PRAM reset). I also run a second problem but only once and only upgrading to 10.7.1 (not to 10.7). It says that my RAM was on wrong position.. I had to remove and install the RAM again and it worked.
Any other case like this? (This append only on my MacPro - early 2009. On my MacBook and my MacBook Pro OSX Lion works fine).

Is there a pattern to the chimes, or are they simply random, as if the Mac is repeatedly rebooting on its own?
Have you tried a "Safe Boot"? Press and hold a Shift key as you power up the Mac. Does it start then?
If it starts at all "Safe Boot" will take much longer than usual, that's normal. Shutting down will take longer also. Try it.

Lumia 625 does not detect MicroSD cards, please he...

My Lumia 625 does not detect MicroSD cards when inserted.
I have tried powering off/on.
I have tried formating them in my PC.
I have updated my phone to 3050.0000.1334.0007
I have tried a Kingston 64GB SDXC Class10
I have tried a Sandisk Ultra 64GB SDXC Class10
I have tried formatting the cards in various ways including exFAT / FAT32 / FAT64 etc.
The only progress i made was when i tried formatting in NTSC and after inserting the card i recieved a message saying "incomattable formatted card inserted, do you whish to format the card in a compattable format?" After choosing yes, the phone formatted the card and then the card was undetected...
This was confirmed by checking the card in my PC, which confirmed that the card had been formatted using exFAT, which i believe is the correct format for the phone/card.
Clearly the phone is somehow detecting and writing to the card and the card is functioning properly, except that the phone does not detect that the card exists as expanded memory and will not allow me to use it.
Any help with this would be really appreciated!
Becoming quite frustrated now...

Hi Pepperami33,
Have you tried to perform a reset? It will delete all your data so backup is required. See this link: http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff for the steps on how to backup your files. After creating a backup, go to Settings > About > Reset your phone.
If the reset will not work, it is best to have your phone checked by our care point. Visit www.nokia.com/support for more info about the repair process.

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

Lumia 800 does not switch on after hard reset

Similar Messages

Maybe you are looking for