Lumia 800, Headset not usable after the last (01.0...

Hello,
I found, that from the last software upgrade the headset is simply not usable for making calls:
- the problem is only in call mode
- the volume up/down is not working
- the microphone is too quiet
Before the software upgrade everything was fine ...
Does anybody has idea what can be wrong with the phone?

hi mate,
have you checked that you are up-to-date with the latest firmware installed on your device, via checking via Zune on your PC? if there are any updates, please update to the latest version offered. also check that you are up-to-date with all the latest Nokia system apps in the Marketplace. also try performing a soft reset (pressing the volume down and power buttons together until the phone vibrates).
Let us know how you get on.

Similar Messages

Why MLB.TV is not appearing after the last update?

why MLB.TV is not appearing after the last update?

Make sure the store is set to the US.. Also restart the ATV.

Lighting cables and adapters are not working after the last iOS 7 update.

Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
I have an iPhone 5 funning iOS 7.0.2.
I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

I had the same bug. Powering off the phone and back on resolved the issue

After the last Itunes update I have been getting runtime errors R6034 now Itunes will not launch,, after the last Itunes update I have been getting runtime errors R6034 now Itunes will not launch

After the last itunes updatei am getting runtime errors R6034 my OS is windows vista
I have uninstalled and reinstalled Itunes several times

Hello, Desfromnotts.
Thank you for the question. Try uninstalling all components of iTunes in the order specified of the article below. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
You may need to process the steps in the article below for each component when uninstalling iTunes if the issue persists.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

Isight camera not working after the last update

After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference

*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

Airplay is not working after the last updates

Hello,
I've updated iphone, ipad air and ipad 4 to ios 8 and apple tv 3 (1469) to newest version (7?).
After that it's absolutely a disaster.
Mostly I using the apple tv for music streaming, sometimes for mirroring...
But it can not be found, I can not select the apple tv on ios devices because it is not there!
The airplay symbol comes after swiping the menu up after approx. 1 sec and theres only the Denon Cocoon to selcet but not the apple tv.
The same on the iMac I can not choose the apple tv directly from the top bar for mirroring and not in itunes for music streaming (but the Cocoon is there), and this altough the imac is also via ethernet on the same router, no wlan connection is required for streaming in this case.
The apple tv is connected by ethernet to the router and I see in the router menu that the apple tv is connected to the internet.
I did a hard-reset but this did not help.
I've tried also with blutooth on or off and rebootet the ios devices.
From time to time one of the different devices shows the apple tv...this morning for example after I turn blutooth on at the iphone and waited 30 seconds, it was there and it worked - sometimes on device shows the apple tv without blutooth and if I connect, nothing happen and the music starts on the device itself.
If I start the apple tv via remote, everything is fine, I find it at all devices including the imac!
If I managed it to start the music streaming with an device (as written, from time to time it works) the apple tv is avaible on all other devices.
For me theres no question that theres a bug in the new apple-tv software (because I can not find it on the imac as well, otherwise I would think the bug is in ios 8).
It is not possible to wake up the apple tv via airplay from sleep mode, I think that is the problem - if I turn off the sleep mode everything is fine.

the1sen wrote:
There appear to be many others with the same issue on here.
Nothing unusual in that after an update.
Generally speaking it's fairly obvious from the volume of such posts if there's a problem with an update or not. On this occasion I'm not seeing the sort of numbers that indicate a widespread issue.

Airplay does not work after the last update on iMac

Today I have instaled the last updates on my iMac and the AirPlay mirroring on my AppleTV does not work anymore. I can hear the sound but the video doesn't work. Somebody knows how to fix this? Really dissapponted with Apple products.

Try resettng the SMC and PRAM each 2-3 times, then post back.
Instructions are in Intel iMac SMC and PRAM resets

HT204306 My Ipad does not reboot after the last update, I tried the reset mode and that didnot work . All I get when turned on is the apple icon. Help Please?

I have and Ipad Model A1458 and serial number DMPJVX72F183 I did the last update 8.1 and since then I can not get it to work. The apple icon comes on then fades and then comes back then fades , this continues until I turn it off or the battery run died. I tried the reset but that did not work. Any suggestion?

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Friends "buddy list" not showing after the last update..!!

I just downloaded the update and for some reason i cant see my friends online, i tried restarting couple of time and its still the same, and two of my other friends are having the same problems, any advise ?

First.
Repair permissions.
Applications > Utilities > Disk Utility
Highlight your Mac's HD and click the Repair Disk Permissions button near the bottom.
Restart iChat

Can not boot after the last upgrade [solved]

Hi all,
I upgraded my system this morning, but when loading I get the following error:
ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: failed to recover some devices, retrying in 5 seconds
It says so for 3 times, then continues and ends with a kernel panic.
Any idea what might have gone wrong?
Best regards,
Jan

Hi again,
Thanks to good guys on IRC, my problem is a sort of solved. The solution was basically to go back to the old IDE subsystem on my Intel box and wait until the kernel and the respective modules get more stable before trying the transition again. More precisely, I did the following:
1) in /etc/mkinitcpio.conf removed pata, sata and scsi hooks and put back the ide hook (and then of course ran mkinitcpio again);
2) in /etc/rc.conf blacklisted ata_piix and ata_generic;
3) in /etc/fstab and /boot/grub/menu.lst changed the device names back from /dev/sda* to /dev/hda*.
I hope there will be some announcement on Arch website when it will make sense to try the new system again.
Thanks to everyone who helped to sort this trouble out,
Jan

Lumia 800 email not synchronising

Has anyone else experienced a problem with email synchronisaton after the Tango update? My Lumia 800 periodically ceases to synchronise email accounts and requires a phone restart before it will pick up email changes. This seems to happen on a 5-7 day cycle. Is this a known bug or just a peculiarity of my phone? Prior to the recent update, I had not experienced this problem.

donaldvc wrote:
Yes, as I mentioned in my initial post, email will synchronise immediately after a soft reset, but the problem recurs after 4-5 days. It looks in some ways like a memory leak, especially as SMS notifications also cease to function.
Thank you,
donaldc
Hi all,
I've got the very same issue with my Lumia 800, as donaldc! after the Tango update the email synchronisation sometimes freezes (once a day or every two days), the SMS messages also cease to function (i.e., the recipients do not get my SMS messages) and the only way out is to restart the phone. This seems a memory leak or some (bad) combination with installed apps...
Thank you! Regards,

Problems in XORG after the last update.

My gdm not works after the last update.
GDM open, but when i try login, this panel close and open again.
My xorg.0.log http://pastebin.com/epTaJ1zN
Please help-me !

Which graphics driver are you using?
A nice alternative display manager for while you try fix gdm is lightdm https://wiki.archlinux.org/index.php/LightDM
otherwsie:
https://wiki.archlinux.org/index.php/GN … .2B_cursor
https://bbs.archlinux.org/viewtopic.php?id=161900
Last edited by jrussell (2013-06-04 17:01:41)

Search for records in the event viewer after the last run (not the entire event log), remove duplicate - Output Logon type for a specific OU users

Hi,
The following code works perfectly for me and give me a list of users for a specific OU and their respective logon types :-
$logFile = 'c:\test\test.txt'
$_myOU = "OU=ABC,dc=contosso,DC=com"
# LogonType as per technet
$_logontype = @{
2 = "Interactive"
3 = "Network"
4 = "Batch"
5 = "Service"
7 = "Unlock"
8 = "NetworkCleartext"
9 = "NewCredentials"
10 = "RemoteInteractive"
11 = "CachedInteractive"
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0""
or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>" -ComputerName
"XYZ" | ForEach-Object {
#TargetUserSid
$_cur_OU = ([ADSI]"LDAP://<SID=$(($_.Properties[4]).Value.Value)>").distinguishedName
If ( $_cur_OU -like "*$_myOU" ) {
$_cur_OU
#LogonType
$_logontype[ [int] $_.Properties[8].Value ]
#Time-created
$_.TimeCreated
$_.Properties[18].Value
} >> $logFile
I am able to pipe the results to a file however, I would like to convert it to CSV/HTML When i try "convertto-HTML"
function it converts certain values . Also,
a) I would like to remove duplicate entries when the script runs only for that execution.
b) When the script is run, we may be able to search for records after the last run and not search in the same
records that we have looked into before.
PLEASE HELP !

If you just want to look for the new events since the last run, I suggest to record the EventRecordID of the last event you parsed and use it as a reference in your filter. For example:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[(EventID=4624 and
EventRecordID>46452302)]]</Select>
<Suppress Path="Security">*[EventData[Data[@Name="SubjectLogonId"]="0x0" or Data[@Name="TargetDomainName"]="NT AUTHORITY" or Data[@Name="TargetDomainName"]="Window Manager"]]</Suppress>
</Query>
</QueryList>
That's this logic that the Server Manager of Windows Serve 2012 is using to save time, CPU and bandwidth. The problem is how to get that number and provide it to your next run. You can store in a file and read it at the beginning. If not found, you
can go through the all event list.
Let's say you store it in a simple text file, ref.txt
1234
At the beginning just read it.
Try {
$_intMyRef = [int] (Get-Content .\ref.txt)
Catch {
Write-Host "The reference EventRecordID cannot be found." -ForegroundColor Red
$_intMyRef = 0
This is very lazy check. You can do a proper parsing etc... That's a quick dirty way. If I can read
it and parse it as an integer, I use it. Else, I just set it to 0 meaning I'll collect all info.
Then include it in your filter. You Get-WinEvent becomes:
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624 and EventRecordID>$_intMyRef)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0"" or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>"
At the end of your script, store the last value you got into your ref.txt file. So you can for example get that info in the loop. Like:
$Result += $LogonRecord
$_intLastId = $Event.RecordId
And at the end:
Write-Output $_intLastId | Out-File .\ref.txt
Then next time you run it, it is just scanning the delta. Note that I prefer this versus the date filter in case of the machine wasn't active for long or in case of time sync issue which can sometimes mess up with the date based filters.
If you want to go for a date filtering, do it at the Get-WinEvent level, not in the Where-Object. If the query is local, it doesn't change much. But in remote system, it does the filter on the remote side therefore you're saving time and resources on your
side. So for example for the last 30 days, and if you want to use the XMLFilter parameter, you can use:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[TimeCreated[timediff(@SystemTime) <= 2592000000]]]</Select>
</Query>
</QueryList>
Then you can combine it, etc...
PS, I used the confusing underscores because I like it ;)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file fr

After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file from; [right click], Combine files into one PDF multiple files chosen in the explorer. A message pops up asking if I want to run repair. Answering in the afirmative results in another message stating files are missing. And we are back at square one.

What is the exact error? Else you could always reinstall your software.

Lumia 800, Headset not usable after the last (01.0...

Similar Messages

Maybe you are looking for