Lumia 800 - pop3 and imap
Anybody setup a POP3 account on the phone and find that it works 100% like an IMAP setting? POP3 traditionally does not synchronise backwards, i.e. you download message to phone and leave original on server, delete off phone, it stays on the server. However in their wisdom it seems that not only can you NOT switch easily between a POP3 and IMAP account setting (you need to delete the account and then reinstall it), it also has defaulted that the POP3 setting, is the EXACT same as an IMAP.
Am I missing something? Granted this is only my 5th smartphone and 50th time I have set the same account up, but yeah must definately be me, as a company like Nokia would of checked their programs before giving it out... right?
Any assistance, including proving that it is me stuffing it up, would be greatly appreciated.
Thanks in advance,
LUCH
Hi LUCHlumia800,
Thanks for your feedback and welcome to the forum.
What you describe is not really what is different between POP and IMAP. POP actually does allow for syncing back to the server and remove mail there once deleted on the client. Actually POP can (optionally) be configured to either remove from server when removed on the client or remove from server once fetched. While these options are available implementation is not compulsory.
IMAP on the other hand basically mirrors the server and client sides so whatever happens on one side also happens on the other including adding or removing folders.
Hope this helps,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!
Similar Messages
-
POP3 and IMAP Won't Start - Dovecot error 89
I have been struggling with what should be a simple problem all day: turning the mail server on!
This is a clean out of the box start. I bought a new Mac Mini with Mountain Lion Server.
POP3 and IMAP services will not start and Dovecot repeatedly reports the following (no more detail anywhere that I can find):
Nov 7 16:59:24 artemiscom com.apple.launchd[1] (org.dovecot.dovecotd[1151]): Exited with code: 89
Nov 7 16:59:24 artemiscom com.apple.launchd[1] (org.dovecot.dovecotd): Throttling respawn: Will start in 10 seconds
SMTP is running and I can telnet into port 25.
serveradmin fullstatus mail gives the following:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 0
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "STOPPED"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "STOPPED"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2012-11-07 16:41:49 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = ""
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2012-11-07 16:41:49 +0000"
If I restart the mail server POP3 and IMAP staus goes to STARTING and then to STOPPED.
I've managed to get Dovecot working on a Centos server but the generally simple configuration on the Mac has me dumbfounded.
Any help is appreciated whilst I still retain my sanity.
ThanksOK. I managed to solve this problem.
When the mail server is first initialised SSL certification for dovecot is set to on but the certificates are all commented out in the configuration file.
To determine this is the problem, turn the mail server off then at the command line start the server by entering the following command:
/Applications/Server.app/Contents/ServerRoot/usr/bin/doveconf -f service=master -c /Library/Server/Mail/Config/dovecot/dovecot.conf -m master -p -e
This is the output I received:
/Applications/Server.app/Contents/ServerRoot/usr/sbin/dovecotd -F
doveconf: Fatal: Error in configuration file /Library/Server/Mail/Config/dovecot/dovecot.conf: ssl enabled, but ssl_cert not set
Edit the file /Library/Server/Mail/Config/dovecot/conf.d/10-ssl.conf:
sudo vi /Library/Server/Mail/Config/dovecot/conf.d/10-ssl.conf
You can do one of two things:
1) Edit the line #ssl = yes to:
ssl = no
2) Uncomment the ssl_cert, ssl_key and ssl_ca lines
Now restart the mail server and check the logs for dovecot error 89 (shouldn't be there) and/or at ther command line enter the command:
sudo serveradmin fullstatus mail
This will display the mail server status which should be something like this (note pop3 and imap now running):
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 0
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2012-11-08 11:33:25 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2012-11-08 11:33:25 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2012-11-08 11:33:58 +0000" -
Exchange 2013 POP3 and IMAP connectivity issues 0x800CCC0F
Hi all,
there's an Exchange 2013 server running without problems during "regular" use, but when it comes to POP3 and/or IMAP (we really need that for some systems), everything is fine until there's a message with an attachment of about 100kb or more.
We can poll messages with smaller attachments without problem, but bigger sizes won't work.
So for testing I tried POP3 within Outlook Express, it gives Error 0x800CCC0F
Telnet to TCP110 simply breaks up the connection when I try "retr"
IMAP shows those messages as "to be deleted", but they are accesible within OWA.
Test-PopConnectivity (also for IMAP) runs smoothly and successfully.
Firewall is opened for all connections.
Problem is and has always been there. The server is updated to the newest SP/updates.
I tried both 110/143 and corresponding SSL - no difference.
Pop3 and Imap logging shows no errors
There's Trend Micro Messaging Security installed, but has been disabled for testing - no difference. (Issue has been there before installation of TM)
So, any ideas how to fix this? I'd appreciate...
Thanks in advance,
RobertHello,
Take a network trace on both ends to see if there are any devices like firewalls drop the package.
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Thanks,
Simon Wu
TechNet Community Support -
Hi all
We have a legacy Exchange 2003 running with more than 800 users and with a very mixed configuration for client access. Most of users are running POP3/SMTP on the Exchange, some are running IMAP/SMTP and some are running MAPI access.
Please note that THERE IS NO WAY that we move all users to MAPI access before the installation (due to deadlines).
We plan to install a new Exchange 2010, starting with a CAS/HUB server. We do not need to migrate users automatically, and we can proceed later to move them individually to the new Exchange 2010 infrastructure in a non-transparent way.
More importantly, we need to maintain that everyone receives their e-mail and all communication through the exchange 2003 continues uninterrupted.
My question is can we install the new CAS/HUB server, while maintaining the old exchange server running with it's old name and create new names for the CAS/HUB server. In such a configuration, will all the Exchange 2003 services continue to run as usual
(POP3/IMAP/SMTP/MAPI)?In addition, you may also spend some times at below mentioned helpful resources to check the prerequisites before moving all mailboxes from exchange 2003 to 2010 :
http://exchangeserverpro.com/wp-content/uploads/2011/02/Exchange-Server-2003-to-2010-Migration-Guide-V1.3-Planning-Chapter.pdf
http://technet.microsoft.com/en-us/library/dd638130(v=exchg.141).aspx
https://www.simple-talk.com/sysadmin/exchange/upgrade-exchange-2003-to-exchange-2010/
Moreover, to avoid any interruption during the completion of migration process, you can also take a look at this application(http://www.exchangemigrationtool.com/) that could be a good alternate approach
for you. -
What is POP, POP3, and IMAP When I Setup My Email Account in the HP ePrint App?
I have done as much research as I can do in regards to setting up the HP ePrint App Email Accounts. If you do not see your email information listed here, feel free to post it below or contact your internet service provider, phone or email company, or whomever else that might know this. I am certain there are many more that could be added but this is a rather extensive list. I hope you find what you need to finish setting up your email applications.
I have noticed information differs from website to website but as I have learned over time, with domain masking and companies buying out other companies, I just researched all the information I could find and that way if one of the hostnames or ports don’t work, then you can continue to view further into this page to see if that information is the same. At that point, if you can’t find what you need here, I would say you have done all that you can do before contacting the appropriate support team for your email information.
Most of the links are active and the ones listed below should send you directly the pages I pulled this information from but only a few of them were from the actual support sites themselves (Apple support was vague, as well as Microsoft, Macintosh, and commonly used ISPs). Save yourself some time by searching here first. I hope you find what you need in this one-stop-shop and if you get an email address not listed here please post it below and I will add it to this original document.
Lastly, as this information is from forum-based and other unofficial websites, I would like to add that this is a copy/paste/edit-for-easy-reading document I created in my spare time. This is a very long document so I do recommend using the search and find quick keys to search for the email you need but the top part of this has definitions as to what servers, ports, and hostnames are and the basic setup in case you need to know what these options are used for and what they mean.
Below are the most common settings needed to set up most POP3/IMAP Email Clients or Devices:
The following information below can be found at http://www.swestcom.com/Support/q4.htm
“What is POP3?
Post Office Protocol version 3 (POP3) is a standard mail protocol used to receive emails from a remote server to a local email client. POP3 allows you to download email messages on your local computer and read them even when you are offline."
"What is IMAP?
The Internet Message Access Protocol (IMAP) is a mail protocol used for accessing email on a remote web server from a local client. IMAP and POP3 are the two most commonly used Internet mail protocols for retrieving emails. Both protocols are supported by all modern email clients and web servers."
"Main difference between IMAP and POP3:
The POP3 protocol assumes that there is only one client connected to the mailbox. In contrast, the IMAP protocol allows simultaneous access by multiple clients. IMAP is suitable for you if your mailbox is about to be managed by multiple users."
"What is SMTP?
Simple Mail Transfer Protocol (SMTP) is the standard protocol for sending emails across the Internet. SMTP uses TCP port 25 or 2525 and sometimes you can have problems to send your messages in case your ISP has closed port 25 (How to check if port 25 is open?). To determine the SMTP server for a given domain name, the MX (Mail eXchange) should have more information."
"When setting up:
POP - choose POP and the incoming server port will default to 110
IMAP - choose IMAP and the incoming server port will default to 143
All other settings are the same.
Username = [email protected]
Password = the password you set up when you configured your mail box
Incoming Mail Server = mail.yourdomain.com
Outgoing Mail Server= smtp.yourdomain.com
Outgoing Server Requires Authentication (typically found in advanced options or settings)
Do NOT check "Log on Using Secure Password Authentication"
Use the same Username and Password as Incoming or select "Use Same Settings as Incoming"
Outgoing Server Port= 2525 or 587This is subject to change based on the individual preferences of your ISP"
Note - Substitute your actual domain name for "yourdomain.com" and substitute the first part of your email address for "user."
Email Ports
For networks, a port means an endpoint to a logical connection. The port number identifies what type of port it is. Here are the default email ports for:
POP3 - port 110
IMAP - port 143
SMTP - port 25
HTTP - port 80
Secure SMTP (SSMTP) - port 465
Secure IMAP (IMAP4-SSL) - port 585
IMAP4 over SSL (IMAPS) - port 993
Secure POP3 (SSL-POP) - port 995.
For Mozilla, Outlook, Windows mail, Windows Live, Outlook 2003-2010, Entourage for Mac OS, and Mail for Mac OS follow this link: http://help.outlook.com/en-ca/140/cc875899.aspx (this website has not been looked over for validation but may assist in other leads towards the right direction)
Have you ever wished you could use your AOL email account with something else, something more powerful, something more convenient than AOL, something like Outlook, Windows Mail, Outlook Express, or The Bat!? Thanks to the wonders of IMAP, you can.
If you set up your AOL email account in any email client capable of IMAP, you can receive and send messages easily. Even the AOL folders — Spam, Saved, Sent Items and your Trash will be there automatically. Of course, you can also use POP to fetch incoming mail in an uncomplicated fashion.
For instructions on how to assist you with this you can also follow this link: http://email.about.com/od/aoltips/qt/Access_an_AOL_Email_Account_with_any_POP_IMAP_Email_Program.htm
Set Up POP or IMAP E-Mail on an Android G1 How do I set up POP or IMAP E-Mail on an Android Device?
From the home screen, tap Applications > Settings > Accounts & sync > Add account > Manual setup.
On the Incoming settings screen, in the Protocol drop-down menu, select IMAP or POP3. We suggest you select IMAP because it supports more features.
In the Email address and Username text boxes, enter your full e-mail address, for example [email protected], and then select Next. Your user name is the same as your e-mail address.
In the Password text box, enter your password.
In the IMAP server or POP3 server text box, enter your IMAP or POP server name. For information about how to look up the server settings you need to complete this step and other steps in this procedure, see “How do I find the server settings” later in this topic.
In the Security type drop-down menu and Server port text boxes, specify the POP or IMAP settings that you looked up in step 5, and then tap Next. Your e-mail application will check your IMAP or POP settings.
On the Outgoing server settings screen, the Login required option should be selected for you, and the Username and Password text boxes should be filled in.
In the SMTP server text box, enter the SMTP server name you looked up in step 5.
In the Security type drop down menu and Server port text box, specify the SMTP settings that you located in step 5, and click Next.
In the Account name, text box, enter a name for your account (for example “Office 365 email” or “Work email”). In the Your name text box, enter the name you want displayed when you send e-mail to others (for example “Tony Smith”), and then select Finish Setup.
What else do I need to know?
If your e-mail account is the type that requires registration, you must register it the first time you sign in to Outlook Web App. Connecting to your e-mail account through a mobile phone will fail if you haven't registered your account through Outlook Web App. After you sign in to your account, sign out. Then try to connect using your mobile phone. For more information about how to sign in to your account using Outlook Web App, see How to Sign In to Your E-Mail Using a Web Browser. If you have trouble signing in, see FAQs: Sign-in and Password Issues or contact the person who manages your e-mail account.
Information below provided by: http://www.defcon-5.com/support/index.cfm?docid=95
Yahoo:
POP3: pop.mail.yahoo.com Port 995
SMTP: smtp.mail.yahoo.com Port 465
ESMTP should be enabled
SSL: YES
User name must not include the @yahoo.com
GMail:
POP3: pop.gmail.com Port 995
SMTP: smtp.gmail.com Port 465
ESTMP should be enabled
SSL: YES
AOL:
IMAP: imap.aol.com Port 143
SMTP: smtp.aol.com
SSL: NO
ATT World Net:
POP3: ipostoffice.worldnet.att.net Port 995
SMTP: imailhost.worldnet.att.net Port 465
SSL REQUIRED for Incoming and Outgoing
Cox:
NOTE: With Cox you can only use their SMTP servers while on their network.
Central
POP3: pop.central.cox.net
SMTP: smtp.central.cox.net
ESMTP should be enabled
SSL: NO
East Cost
POP3: pop.east.cox.net
SMTP: smtp.east.cox.net
ESMTP should be enabled
SSL: NO
West Cost
POP3: pop.west.cox.net
SMTP: smtp.west.cox.net
ESMTP should be enabled
SSL: NO
Comcast:
POP3: pop3.comcast.net Port 110
SMTP: smtp.comcast.net Port 587
ESMTP should be enabled
SSL: NO
User name must NOT include @comcast.net
Comcast SMART ZONE:
POP3: sz-pop.mail.comcast.net Port 995
SMTP: smtp.compcast.net Port 587
ESMTP should be enabled
SSL: NO
User name must NOT include @comcast.net
Earthlink:
POP3: pop.earthlink.net Port 110
SMTP: smtpauth.earthlink.net Port 587
ESMTP should be enabled
SSL: NO
User name must include @earthlink.net
Hughes Net:
POP3: mail.hughes.net Port 110
SMTP: smtp.hughest.net Port 25
ESMTP should be enabled
SSL: NO
User name must include @hughes.net
Metrocast:
POP3: pop.va.metrocast.net Port 110
SMTP: smtp.va.metrocast.net Port 25
ESMTP should NOT be enabled
User name MUST be full email address
SSL: NO
MSN:
POP3: pop 3 . live. com port #995.
SMTP: smtp.live. com port #25
SSL: YES
ESMTP: should be enabled
User name must have the full email address
NetZero:
POP3: pop.netzero.com Port 110
SMTP: smtpauth.netzero.com Port 25
ESMTP should be enabled
SSL: NO
User name must include @netzero.com
Verizon:
POP3: incoming.verizon.net Port 110
SMTP: outgoing.verizon.net Port 25
ESMTP should be enabled
SSL: NO
The following information is according to a forum comment at the bottom of this webpage concerning HOTMAIL and mail server settings:
“As other web based email services, Hotmail is using the HTTP protocol for connecting you to your mailbox. If you want to send and receive Hotmail emails using an email client software, then your software must support Hotmail HTTP access for your email account. Some email clients, such as Outlook Express or Microsoft Outlook, offer builtin support for Hotmail accounts, so you only have to select HTTP when you are asked to select your email account type and select Hotmail as the HTTP Mail Service Provider.”
Mail Server Settings for Hotmail using the Microsoft Outlook Connector
If you are using Microsoft Outlook & the Outlook Connector, you can define your Hotmail account just like any regular POP3 email account:
Hotmail Incoming Mail Server (POP3) - pop3 . live. com (logon using Secure Password Authentification - SPA, mail server port: 995)
Hotmail Outgoing Mail Server (SMTP) -smtp . live . com (SSL enabled, port 25)
Additional information from this website has not been confirmed or validated as of yet but it does include additional information or perhaps corrected information. If the above steps do not fix the problem with setting up an email account for the HP Apps then read on:
Yahoo! Mail Settings
Yahoo Mail offers standard POP3 access for receiving emails incoming through your Yahoo mailbox, by using your favorite email client software. To setup your email client for working with your Yahoo account, you need to select the POP3 protocol and use the following mail server settings:
Yahoo Incoming Mail Server (POP3) - pop.mail.yahoo.com (port 110)
Yahoo Outgoing Mail Server (SMTP) - smtp.mail.yahoo.com (port 25)
POP Yahoo! Mail Plus email server settings
Yahoo Plus Incoming Mail Server (POP3) - plus.pop.mail.yahoo.com (SSL enabled, port 995)
Yahoo Plus Outgoing Mail Server (SMTP) - plus.smtp.mail.yahoo.com (SSL enabled, port 465, use authentication)
· Google GMail Settings
The Google GMail service offers email client access for retrieving and sending emails through your Gmail account. However, for security reasons, GMail uses POP3 over an SSL connection, so make sure your email client supports encrypted SSL connections.
Google Gmail Incoming Mail Server (POP3) - pop.gmail.com (SSL enabled, port 995)
Outgoing Mail Server - use the SMTP mail server address provided by your local ISP or smtp.gmail.com (SSL enabled, port 465)
MSN Mail Settings
The MSN email service allows you to use the MSN POP3 and SMTP servers to access your MSN mailbox.
MSN Incoming Mail Server (POP3) - pop3.email.msn.com (port 110, using Secure Password Authentication - SPA)
MSN Outgoing Mail Server - smtp.email.msn.com (select "My outgoing server requires authentication")
Lycos Mail Settings
The Lycos Mail Plus service allows you to use POP3 and SMTP servers for accessing your Lycos mailbox.
Lycos Mail Incoming Mail Server (POP3) - pop.mail.lycos.com (port 110)
Outgoing Mail Server - smtp.mail.lycos.com or use your local ISP SMTP mail server
AOL Mail Settings
The AOL email service is a web based system, designed for managing your AOL mailbox via HTTP IMAP access. Unlike Hotmail, you can use any email client to access your AOL mailbox, as long as it supports the IMAP protocol.
AOL Incoming Mail Server (IMAP) - imap.aol.com (port 143)
AOL Outgoing Mail Server - smtp.aol.com or use your local ISP SMTP mail server
Mail.com Mail Settings
The Mail.com email service allows you to use POP3 and SMTP servers for accessing your Mail.com mailbox.
Mail.com Mail Incoming Mail Server (POP3) - pop1.mail.com (port 110)
Outgoing Mail Server - use your local ISP SMTP mail server
Netscape Internet Service Mail Settings
The Netscape e-mail system is web-based, which means you can access their e-mail from any Internet connection. Netscape Internet Service also supports AOL® Communicator, Microsoft® Outlook, Microsoft® Outlook Express, and other POP3 e-mail software. The outgoing mail server needs SSL support, so make sure your email client software supports SSL connections over the SMTP protocol.
Netscape Internet Service Incoming Mail Server (POP3) - pop.3.isp.netscape.com (port 110)
Netscape Internet Service Outgoing Mail Server - smtp.isp.netscape.com (port 25, using a secure SSL connection)
Tiscali Mail Settings
The Tiscali email service allows you to use POP3 and SMTP servers for accessing your Tiscali mailbox.
Tiscali Incoming Mail Server (POP3) - pop.tiscali.com (port 110)
Outgoing Mail Server - use your local ISP SMTP mail server
Freeserve Mail Settings
The Freeserve email service allows you to use POP3 and SMTP servers for accessing your Freeserve mailbox.
Freeserve Incoming Mail Server (POP3) - pop.freeserve.com (port 110)
Outgoing Mail Server - use your local ISP SMTP mail server
Supanet Mail Settings
The Supanet email service allows you to use POP3 and SMTP servers for accessing your Supanet mailbox.
Supanet Incoming Mail Server (POP3) - pop.supanet.com (port 110)
Outgoing Mail Server - use your local ISP SMTP mail se
AT&T SMTP IMAP Server
smtp.att.yahoo.com
SSL Port 465
imap.att.yahoo.com
SSL Port 993
Iphone POP/IMAP Setup
Although I am sure it is out of scope for HP to assist with iPhone setup with mail, contact, calendars, etc so here is a PDF with pictures and a walkthrough from:
https://www.millikin.edu/it/services/HandH/Documents/iPhone%20IMAP%20POP%20Setup.pdf
This hyperlink seems inactive so you may have to copy and paste for a direct walkthrough of this comprehensive pdf.
Lastly if the above information is incorrect or does help, here is one last website to provide you with a complete list that I found located at att.com to assist their customers trying to setup emails in conjunctions with their apps.
Popular POP and IMAP e-mail providers and their incoming server names
http://www.wireless.att.com/support_static_files/KB/KB5892.html
SUBJECT:
Popular POP and IMAP e-mail providers and their incoming server names
What are the AT&T outgoing (SMTP) server names?
SYMPTOM:
ISP E-mail servers
E-mail
ADVISORY:
This information has been retrieved from the proper e-mail provider support pages. This is not an exhaustive list, please refer to your e-mail provider for additional information and compatibility.
FIX:
Outgoing Servers
AT&T outgoing SMTP server policy
Incoming Servers
Users must contact their e-mail service providers for server addresses not included in this list.
Incoming POP3 server uses default port of 110.
Incoming IMAP4 server uses default port of 143.
When using SSL (Secure Socket Layer):
The incoming POP3 port needs to be set to 995.
The incoming IMAP4 port needs to be set at 993.
Internet Service Provider (ISP)
Incoming Server Address
Username
Port
1and1.com
POP: pop.1and1.com
IMAP4: imap.1and1.com
More information at 1and1.com Article.
full e-mail address
POP3: 110
IMAP4: 143
Adelphia
mail.adelphia.net
username only
POP3: 110
Airmail.net (Internet America)
pop3.airmail.net
username only
Alltel.net
(See Windstream)
Ameritech (at&t Yahoo!)
pop.att.yahoo.com
More information on support article.
full e-mail address
POP3: 995
uses SSL
AOL (America Online)
Instructions and Disclaimer
username only
IMAP4: 143
AIM Mail
Instructions and Disclaimer
username only
IMAP4: 143
AT&T Broadband Internet (ATTBI)
mail.attbi.com
AT&T Worldnet
ipop.worldnet.att.net
-or-
ipostoffice.worldnet.att.net
Informational only:
AT&T WorldNet e-mail may not be accessible from any device e-mail client due to firewall restrictions implemented by AT&T WorldNet.
See alternatives for accessing AT&T WorldNet:
- Former AT&T Wireless customers
- New and Existing AT&T wireless services customers
full e-mail address
POP3: 995 uses SSL
Bell Atlantic (Verizon)
pop.bellatlantic.net
Bell South
mail.bellsouth.net
username only
Cable One
mail.cableone.net
More information at Cable One.
username only
Cablevision
mail.optonline.net
username only
Charter
pop.charter.net
username only
Clearwire
mail.clearwire.net
More information at Clearwire Article.
full e-mail address
POP3: 110
Comcast
mail.comcast.net
More information at Comcast Article.
username only
POP3: 110
ComNetcom.net (Earthlink)
pop.comnetcom.net
Compuserve Classic
pop.compuserve.com
Compuserve
imap.cs.com
username only
Concentric
pop3.concentric.net
Coqui (Puerto Rico)
pop.coqui.net
Covad
pop3.covad.net
More information on support article.
full e-mail address
POP3: 110
Cox Central
pop.central.cox.net
More information at Cox Article.
username only
POP3: 110
Cox East
pop.east.cox.net
More information at Cox Article.
username only
POP3: 110
Cox West
pop.west.cox.net
More information at Cox Article.
username only
POP3: 110
Cox Business
pop.coxmail.com
More information at Cox Business Article.
full e-mail address
POP3: 110
Earthlink
pop.earthlink.net
full e-mail address
POP3: 110
Eudora
mail.speakeasy.net
Excite
pop3.excite.com - Requires "Premium/Gold" subscription for POP3 access. More information at Excite.com Article.
full e-mail address
POP3: 110
Flash (SBC Yahoo!)
pop.att.yahoo.com
More information on support article.
full e-mail address
POP3: 995
uses SSL
Gmail (Google Mail)
Instructions and Disclaimer
full e-mail address
POP3: 995 uses SSL
Go Daddy.com
pop.secureserver.net
More information at Go Daddy.com Article.
full e-mail address
POP3: 110
Grande
mail.grandecom.net
More information at Grande Article.
username only
POP3: 110
GTE.net (Verizon)
mail.gte.net
Hughes Direcway
mail.hughes.net
More information at Hughes Direcway Article.
full e-mail address
POP3: 110
Ix.Netcom.com (Earthlink)
pop.ix.netcom.com
Insight Broadband
mail.insightbb.com (SSL must be enabled for remote access)
More information at Insight Broadband Article.
username only
Juno
POP3/IMAP4 is not available.
More information on support article.
Lightfirst (Avenew)
inmail.lightfirst.com
Mac.com (Apple Computer)
mail.mac.com
POP3 access will not work with "alias" accounts.
More information at Mac.com. Related articles 25275, 51729, and 86685.
username only
POP3: 110
IMAP4: 143
Mail.com
pop1.mail.com
POP3: 110
Mediacom
mail.mchsi.com
More information at Mediacom Article.
full e-mail address
POP3: 995 uses SSL
MEdia Net
POP3 access is currently not available to MEdia Net e-mail accounts. Please access MEdia Net e-mail through the device browser.
POP3: 110
Mindspring (Earthlink)
pop.mindspring.com
full e-mail address
POP3: 110
mMode
pop.mymmode.com
username only
POP3: 110
MSN
pop3.live.com
For subscribers that use (and pay for) MSN as their Internet Service Provider, MSN provides POP3 access to their e-mail. More information on configuring e-mail applications, see Microsoft Article 930008.
Alternatives for accessing MSN from a mobile device:
- Former AT&T Wireless customers
- New and Existing AT&T wireless services customers
full e-mail address
POP3: 995
uses SSL
MSN Hotmail
MSN Hotmail is a HTTP e-mail service so a POP3 server name is not offered by MSN Hotmail. While some 3rd party e-mail servers allow access to Hotmail accounts, this may put e-mail security at risk. AT&T will not house 3rd party e-mail server information.
Alternatives for accessing MSN Hotmail from a mobile device:
- Former AT&T Wireless customers
- New and Existing AT&T wireless services customers
NetAddress or Usa.net
pop.netaddress.com
POP3: 110
Network Solutions
mail.yourdomain.com
Network Solutions Support Page
full e-mail address
POP3: 110
NetZero (United Online)
pop.netzero.com
NetZero E-mail Support Page
username only
POP3: 110
Netscape
pop3.isp.netscape.com
Netscape E-mail Support Page
full e-mail address
POP3: 110
NVBell (SBC Yahoo!)
pop.att.yahoo.com
More information on support article.
full e-mail address
POP3: 995
uses SSL
OptOnline
mail.optonline.net
OptOnline Support Article
username only
PacBell (SBC Yahoo!)
pop.att.yahoo.com
More information on support article.
full e-mail address
POP3: 995
uses SSL
PeoplePC
mail.peoplepc.com
- or -
pop.peoplepc.com
PeoplePC Support Article
full e-mail address
POP3: 110
Pipeline (Earthlink)
pop.pipeline.com
POP3: 110
Prodigy (SBC Yahoo!)
pop.att.yahoo.com
More information on support article.
full e-mail address
POP3: 995
uses SSL
Qwest in Albuquerque, New Mexico
pop.albq.qwest.net
POP3: 110
Road Runner
pop-server.xxxx.com
"xxxx" equals the users e-mail domain, which can be in the region format ("cfl.rr" for Central Florida or "nyc.rr" for New York City) or simply "roadrunner". The domain can be found after the @ symbol in the e-mail address i.e. [email protected] or [email protected]
Road Runner Support Pages - Choose the appropriate region/state and select the Help menu to locate e-mail settings as they are different based on each region/state.
username only
POP3: 110
sbcglobal.net
pop.att.yahoo.com
More information on support article.
full e-mail address
POP3: 995
uses SSL
snet.net
pop.att.yahoo.com
More information on support article.
full e-mail address
POP3: 995
uses SSL
Surewest
pop.surewest.net
More information at Surewest Article.
full e-mail address
POP3: 110
swbell.net
pop.att.yahoo.com
More information on support article.
full e-mail address
POP3: 995
uses SSL
Verizon
incoming.verizon.net
username only
POP3: 110
Verizon (custom server)
pop.verizonemail.net
POP3: 110
Verizon (Yahoo! Mail)
incoming.yahoo.verizon.net
More information at Verizon Yahoo! Article.
full e-mail address
POP3: 110
wans.net
pop.att.yahoo.com
More information on support article.
full e-mail address
POP3: 995
uses SSL
Websitepros
Server information varies on product.
Contact Information
Windstream
pop.windstream.net
More information on support article.
full e-mail address
POP3: 110
Yahoo!
pop.mail.yahoo.com - Requires a monthly subscription fee for POP3 access.
More information on support article.
See Alternatives for accessing Yahoo! E-mail:
- Former AT&T Wireless customers
- New and Existing AT&T wireless services customers
username only
POP3: 995
uses SSL
Yahoo Small Business
pop.bizmail.yahoo.com
"Forwarding" must be disabled and "POP access" must be enabled. Yahoo Small Business Support Page
SPAM/Bulk folders should be emptied if receiving errors occur.
full e-mail address
POP3: 110
If you are viewing information on devices or services, please note: content reflects instructions for devices and services purchased from AT&T. Some differences may exist for devices not purchased from AT&T.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!
This question was solved.
View Solution.Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
Lumia 800 - Ringtone and vibration is too soft
I just got the lumia 800 for 2 days.
I found that the ringtone volume is too soft and the vibration is not strong enough (in adddition with the problem of once start vibration in incoming call).
I hope some update can help fix this problems.I would not be so sure about that..
http://www.nokia.co.uk/gb-en/support/faq/?action=singleFAQ&caseid=FA128729_en_US
My vibration is also quite weak, though it's quite OK when you run the vibration diagnosis.. ##634# or something like that.. -
Nokia Lumia 800 Evaluation and Repair Charges
Hi,
I have an issue with my Nokia Lumia 800. Recently, the screen turns off when making or receiving calls in-door but it stays on out-door. I read a forum abt if online which indicated that it is an issue with d proximity sensor. I don't have a protective covering on the screen but still experiences this issue all the time. Can it be fixed in ur office and for how much. Also, I will like to change the screen on the phone cos it got broken when it fell down some weeks back. How much will dat cost also? Thanks.
Moderator's Note: A more appropriate subject was provided.Questions like yours can only be answered by a Nokia Care Point. This is a user to user support forum. You can locate your local care point using the link below. I suggest you contact them directly.
www.nokia.com/support
Moderator's Note: A more appropriate subject was provided. -
Nokia Lumia 800 charging and photo messaging probl...
I got my Nokia Lumia 800 in May and was great to start with but when I updated the phone to the most recent update I started to get problems.
My picture messaging wont work at all, when i recieve a picture message I get "get media content now" but when I try and get it, it doesnt work, I have taken my phone into the shop to see if I had the correct apn etc but they cant see any problems with it. When I took it back to where I got it from and they told me that they would have to send it away without giving me a replacement until I get it back, telling me I would need to buy a new one, I cant have this as I have a micro sim card which will only fit in certain phones.
I have also recently started to get a charging problem aswell, I have reset my phone but nope, and I have tried other chargers which dont help either, my friend used my charger to see if it would work in her phone and the charger seems to be working fine, again it seems to be a fault with the phone.
I love my phone but I am not happy with the faults that seem to be happening now, as I need my phone to be in working order due to family illness.
Could anyone help me with this ?Have you fully charged via Laptop ? If so let it run down 10% or so and connect to supplied charger and see if it will charge then, also if you have done a software update you could try reverting back to old software then re-installing latest again.
Final solution is a Nokia Care Point !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
Lumia 800: IE and XBL crashing.
So, recently my Lumia 800 had a battery issue. It wouldn't start or charge. Also the flash of the camera had always been broken, it just didn't flash. So I took it to a local service, and they fixed it. Now, when I got it back, everytime I try to enter a website with ANY browser, it just shuts down the browser. Also, when it asks about sending your surf history to Microsoft (first time browser startup), that screen only shows for a second and then crashes.
Now, after a day of using my phone, also the Xbox Live crashes. I can't even open it. It does the start animation when I click the icon, but instantly shows the closing animation. And it came just suddenly, I played some games 15 minutes backwards and then I try again - crash.
Oh and they updated it to the newest version in the service!
Any help before I have to take it to service again? Don't want to do another week with a no-3G phone.
Solved!
Go to Solution.Hi bacon800,
Thank you for your post and welcome to the forums!
We're sorry to hear about your problems. The crashes you are experiencing may be caused a failed installation of the update. What you can try to do is to reset the phone. It will wipe all data off your phone, so make sure to backup all the pictures, music etc. you would like to save. To reset your phone go to Settings > about > reset your phone, it will restore your phone back to the "out of the box" state.
If this does not solve the issue, we would advise you to take the phone back to the service and let them have a look.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
Lumia 800 update and soln.
can i update my lumia 800 to wp8 when avalebale,
will wp8 alow bluetooth file transfer, and why wp restricted the golden feature.
Will nokia lauch the app. For its lumia family for to break the wp restrictions.
Solved!
Go to Solution.Hi writemujtaba,
Thank you for your post and welcome to the forums.
The current series of Lumia devices will not be able to update to Windows phone 8 but development for the current series of Lumia devices will continue for the foreseeable future including an up coming Windows 7.8 update.
For more information please refer to the following link:
http://conversations.nokia.com/2012/06/20/nokia-at-the-windows-phone-8-unveiling/
Currently no information is at hand on what the Bluetooth capabilities and protocols Windows phone 8 will support.
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
Lumia 800 Date And Time Incorrect After Restart
I purchased a Lumia 800 in the UK in December 2012 (SIM FREE) and I have a problem when I switch it on where it resets the date to anything like 1980 or 2084(?) and the time to a random setting. I have looked for a solution but cannot find one that works. Will this issue be fixed with the Windows Phone 7.8 update that's coming? When the date is wildly out it affects the functionality of the phone i.e. sync issues. I have tried restarting a Lumia 610 and this problem does not occur. Are all Lumia 800s the same i.e. (hardware revision)? I thought that if I returned to the retailer a new version my fix the issue.
I'm facing the same issue with my Lumia 800, or rather was. Here's my situation: initially the handset would keep resetting the date to 1980 (and a random time) each time I switched it off and on again. This happened whether I was connected to wifi/mobile data or not. I've recently done a reset of the handset (using the option from within Settings) and this has partially resolved the issue.
Now if I'm connected to wifi/data when I switch the phone off/on the date resets to August 2013. If, however, I'm not connected to wifi/mobile data when I switch the phone off/on the date/time remain unaffected. So this would suggest that it's not an internal battery issue which is what I first suspected. As it stands now then the best option is to reset the handset and then ensure you turn off wifi and data/internet before switching the handset off/on. Still annoying to say the least, but partial workaround.
Furthermore there is no automatic date/time setting to toggle on/off under the date/time settings (removed by the last update I gather?), just an option to toggle between 12hr or 24hr clock. My handset is on the latest OS version and firmware.
Any idea if Nokia/Windows are working on this issue? Just doing a Google serach for this issue and it appears that a fair few other Lumia 800 users are facing the same problem.
Thanks. -
Nokia Lumia 800 Downloads and the Internet
Hi,
I recently bought a nokia lumia 800 during Christmas and after struggles music and videos etc through zune which I got to grips with, there is another problem. I downloaded songs from the internet on the lumia 800 but Its not on my phone and my memory has gone down, I cant seem to find it. Can you download music, videos from the internet on the phone? Thank you and pleae help.Where exactly did you download the songs? You can try going to Music + Videos then Music. Check if you will see the songs there.
-
POP3 and IMAP daemons not starting?
Ahoy, my mail server's been running fine for months now, but this morning it wasn't working.
On closer inspection, Server Admin says that POP and IMAP are disabled. In the settings they are definatly enabled.
I tried restarting the server, and I also updated to 10.4.8, but still nothing.
Does anyone know how I can get an error log or something that might tell me why they're not starting?
thanks!Fixed it.
Apologies for the false alarm. I looked at the logs and config and thought 'This looks messy. I need to look cool in front of these guys, I should clear this up.'
So I restored the default main.cf file and reconfigured my mail server from scratch, and now it's working...
Thanks anyway! -
Lumia 800 headphone and ringing tone loadness
Just upgraded to the latest SW. After that I was listening music with the headphones. Suddenly music started to play very load at the same time with incoming call, almost my head exploded. Not so good feature. Also without headphones, if someone calls me, ringing tone starts always load, then after second or two it goes back to niormal level I have set. Has anybody face similar problems ? P.S. iphone headphones don't work with Lumia 800, nobody can hear me talking, but i can hear them.
MThe volume bug is solved by the 12072 update I just got in.
JosM -
POP3 and IMAP problem for one user
Hi All,
One of my users has recently connected her iPhone4 to our GW7. We set her up just like numerous other of our users, and she is having some issues. When set up as IMAP using the default application on her iPhone, she can see all her folders and all her mail up to December 21, 2011, but nothing after that. If she asks to download more messages, it successfully shows earlier messages, but still nothing more recent than December. When set up as POP, she is able to download recent messages, but there are wide gaps in what she can see. Whole days are missing. I can send her a new message, and she can POP it right away, but messages that came in just hours before will not come over. None of our other users have any such issues--including at least one with the same iPhone.
The user swears that she has no other e-mail program POPing mail--and even if she did, I don't think it would explain the IMAP issue--but I may be wrong about that. This user does have an incredibly large online mail account--over 20,000 messages in her Mailbox folder alone. I have examined her POA indexes, and they show nothing un-indexed.
I have used my own phone (Droid Bionic) to connect to her GWise account and I see the same behavior from her account.
We are using GWIA 7.0.2, and I can see her phone making connections successfully. I see no errors, but I have not yet studied a Verbose display when she connects.
Any suggestions about how to proceed to troubleshoot this?
What could I do if I wanted to reset whatever information her account stores as to what messages have been POP'ed off or to reset whatever info about IMAP is maintained?
Thanks in advance,
Peter.On 1/12/2012 3:16 PM, pgsmick wrote:
>
> Many, or shall I say /imapreadlimit -10, thanks to you Michael.
> Preumably there is a reason for this limit, and I don't feel like caving
> in to pressure from users who refuse to clean out their mailboxes, but
> what are the specific downsides to raising the limit? And does this
> shed any light on the other issue with using the POP3 method?
>
> Again, you're a gem.
>
> Peter.
>
>
My understanding is as you raise it, the memory usage of the POA and the
CPU hit on the POA will increase. It's been explained to me that the
IMAP standard requires certain correlations and bufferings to made
between the different items, so the memory usage increases. (IMAP is
fairly complex, so I doubt I can explain it all since I doubt I
understand it all). For example IMAP requires synthetic UIDS to be
correct for all the items in the mailbox during the session. There is
room for improvement here, but it hasn't been a super-high priority is
what I was told just this past BrainShare. It will never be a completely
low memory "streaming" kind of solution though - a lot of state has to
be built and maintained during the IMAP session.
POP, I'm not sure about. I do know GW can get confused. Have her specify
her pop UserID differently. For example if her normal gwmailbox is
jsmith, have her try jsmith:v=2 .
Also see other whacky POP switches
you can set affect the date range, and #. The "v","l",and "t" are the
most important.
User ID Login Options
With POP3 clients, users can add the options listed in the table below
to the login name (GroupWise user ID) to control management of their
mailbox messages. If used, these options override the POP3 settings
assigned through the user’s class of service (see Section 47.1.2,
Creating a Class of Service).
Login options are appended to the user ID name with a colon character
(:) between the user ID name and the switches:
Syntax: user_ID:switch
Example: User1:v=1
You can combine options by stringing them together after the user ID and
the colon without any spaces between the options:
Syntax: user_ID:switch1switch2
Example: User1:v=1sdl=10
The syntax for the user ID options is not case sensitive. Login options
are not required. If you do not want to include any login options, just
enter the user ID name in the text box, or following the USER command if
you are using a Telnet application as your POP3 client.
Table 46-1 User ID Login Options
Option
Explanation
Example
v=number between 1-31
The v option defines the POP3 client’s view number. If multiple POP3
clients access the same GroupWise mailbox, each client must use a
different view number in order to see a fresh mailbox.
For example, if two POP3 clients access a mailbox and the first client
downloads the unread messages, the second client cannot download the
messages unless it is using a different view number than the first client.
If this option is not used, the default value is 1.
User_ID:v=1
d
The d option deletes the messages from the GroupWise mailbox after they
have been downloaded to the POP3 client.
User_ID:d
p
The p option purges the messages from the GroupWise mailbox after they
have been downloaded to the POP3 client.
User_ID:p
t=1-1000
The t option defines the download period, starting with the current day.
For example, if you specify 14, then only messages that are 14 days old
or newer are downloaded. If this option is not used, the default value
is 30 days.
User_ID:t=14
n
The n option downloads messages in RFC-822 format rather than the
default MIME format.
User_ID:N
m
The m option downloads messages in MIME format. This is the default.
User_ID:M
s
The s option presets the file size when the STAT command is executed. If
the user mailbox contains a lot of messages or large messages, it can
take a long time to calculate the file size. With this option, the STAT
command always reports an artificial file size of 1, which can save time.
User_ID:S
l=1-1000
The l option limits the number of messages to download for each POP3
session. For example, if you want to limit the number of messages to 10,
you enter l=10. If this option is not used, the default value is 100
messages.
Maybe you are looking for
-
An error occured while running a script
On launching Bridge, I an consistently receiving the following error. "There were problems loading a startup script the last time bridge was launched. Would you like to load them now?" Clicking [Yes] produces the following error: An error occurred wh
-
Missing data type Enhancement: CRMPARTNER_INFORMATION
Hi All, I am creating an interface for business partner from ECC 6.0 to CRM 5.0. Inside CRM I am using the proxy message ABABusinessPartnerIn of namespace http://sap.com/xi/ABA. The problem I have is that from SPROXY inside CRM I can see the data typ
-
SF300 LAG port doesn't work, LACP will not enable.
I'm trying to configure something that seems pretty trivial. I need 2-3 ports to participate in a LAG port. First off, I get the "Port X belongs to a vlan" if the participating port is something other than access vlan 1. This is totally useless.
-
Printer B110a cartridge replacement problem
I have a Photosmart B110 series printer which I bought in India c. 2 years ago. In India we bought and used 862 cartridges. Now I live in Singapore and was told that 862 cartridges are not available here, but all Photosmart printers use 564. The pack
-
N8 (belle) pull down menu
On my homescreen, since the update to belle, we now have a pull down menu which allows you to switch on or off Mobile Data, Wi-Fi, Bluetooth or select Silent Mode. I quite like this feature but want to ask.......can you edit these functions? For exam