Lumia 820 + Alpine CDE-183BT Head unit strange blu...

Hello al,
I had a Sony Xplod with bluetooth and everything was working fine streaming audio / phone  and even the txtings where over the speakers and the Here Drive+ instructions.
Now i bought a "better" heeadunit and the most is working.
i have:
bluetooth for phone including sync for phonebook
streaming for audio
i DONT have:
Voice for naviation ??
txt messages spoken over headunit ??
I tried to reconnect / restart phone / reinstall Drive+ incl voice and maps still nothing.
HELP i need the navigation voice
I tried also both settings for the bluetooth like the advanced switch.
Nokia Lumia 820 - WP8.1 Developer Edition
Alpine CDE-183BT

Hi, Tankyspanky and Hopseflops.
Welcome to the Nokia Support Discussions! 
Have you downloaded a voice for the said app? Note that you will also need to install a voice in your Windows Phone settings. Check this: http://www.nokia.com/ph-en/support/product/here-drive-plus/faq/?action=singleTopic&topic=FA141002&ca.... 
(Note: The above link is intended for customer's in the Philippines. For your region, go here: http://www.nokia.com/global/support/locations/.)
By the way, Tankyspanky, you can also check for the same issue in the Microsoft Developer Network forum since your phone has the Windows Phone 8.1 Preview for Developers SW: http://social.msdn.microsoft.com/Forums/en-US/home?category=wpprevdev.
If you have other questions, just let us know. Have a good one! 

Similar Messages

  • Alpine CDE-103Bt Head Unit and Problem with 160 Gig Ipod Classic

    Hi,
    2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
    Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
    The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
    The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
    I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
    If not has anyone had any postive expereinces with Alpine head units?
    Thanks

    Hi,
    2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
    Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
    The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
    The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
    I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
    If not has anyone had any postive expereinces with Alpine head units?
    Thanks

  • I'm trying to connect my iphone 4S to Alpine CDE-125BT head unit.

    I'm trying to connect my iphone 4S to Alpine CDE-125BT head unit.  I have the latest iphone IOS update (v5.1).  When I connect the phone, the head unit gives me "Unit Error" which means that the iphone is not recognized.  How do you fix this problem?

    KitledTim, thanks for your responses.  I appreciate your help.
    I have more information that prove useful to others who view this post.  The user manual for the CDE-125BT states that a user MUST have the ALPINE FULL  SPEED Connection cable (PN KCE-433iV) to connect to the ipod/iphone (this cable is only supplied with the CDE-126BT) connected to the back of the head unit.  What is more confusing is that what is supplied with the -125BT is a standard USB to iphone cable giving you the impression that it will work on the front USB port.  The installers at Best Buy have seen that the front port has worked in the past but has had problems lately after the 5.1 IOS push.  I went and purchased the FULL SPEED Connection cable and now audio streaming does work.  The only thing that doesn't work is the ability to charge the phone when plugged into the radio.
    How do you drop a line to Apple to ask about accessories (or problems with accessories)?  I'm trying to provide as much info to Alpine to see if they have a solution.

  • Cannot navigate ipod through alpine iDA-X001 head unit

    For some reason my ipod when connected to my head unit( alpine iDA-X001) only plays a shuffle. you should be able to search for artist and songs but when your trying to access it it wont let you. maybe alpine or apple hasnt updated firmware but i dont know why its not working.

    I got same trouble when connected iPhone 4 32Gb to Alpine CDE-9871 via 422i cable. But my friends iPhone 4S 16Gb work fine with this cable and head. Maybe this is 32Gb version not supported or somthing else?

  • Alpine IDA-X001 Head Unit

    I'm having the Alpine IDA-X001 fitted tomorrow afternoon and was wondering if anybody was able to tell me if my iPod Photo worked well with this head unit?

    According to this thread, it works
    http://forums.ilounge.com/showthread.php?t=204971
    Let us know how it works for you. I'd like the 160GB so I can use my lossless collection as well.

  • TS1382 does the latest ipod classic play audio with video on an alpine ive-w530abti head unit

    does the latest ipod classic play audio with video on an alpine IVE-W530ABTi head unit

    According to the compatibility chart on this page, yes it does.
    http://www.crutchfield.com/S-OhTD03kplzN/p_500IVEW530/Alpine-IVE-W530.html#detai ls-tab
    B-rock

  • Using iphone to stream music to my pioneer cde-103bt head unit

    Hi guys i have my bluetooth working for making/accpeting calls, but cannot figure out how to stream music from my iphoone to my headunit using the bluetooth, i wonder if any one can help me out
    thanks in advance
    Str1der

    Hello, Welcome to Apple Discussions.
    At this current time iphone does not support stereo bluetooth. It supports a hands free profile. More information below.
    You can however purchase a stereo bluetooth headset that is sold with a audio connector dongle that connects to the audio jack port on the iPhone. This will then allow you to listen to music via Stereo Bluetooth going through that dongle.
    iPhone Bluetooth Headset and third-party Bluetooth-enabled devices
    http://support.apple.com/kb/HT1841

  • IPod Touch no longer working with car Head Unit since update

    Hi there, I have a problem with using my iPod Touch with my car's head unit.
    I've been using my iPod Touch with the Alpine IDA X001 Head unit fitted in my car for the last 3 months without any problems, however I installed the latest software update for the Touch (v4.0) and now the head unit connects and then says no USB device. At first I thought it was the cable as the cable supplied with the head unit is pretty fragile, so I've replaced it with a new one but it still doesn't work.
    I've tested with my iPod Nano and it works perfectly so its not a problem with the head unit or lead (I plugged the Touch in and it didn't work, plugged the Nano in and worked perfectly and then plugged the Touch in and didn't work).
    Can anyone help or is it gonna be a case of Restoring the iPod Touch back to factory settings ????

    I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

  • Latest firmware update for 8 GB 2nd Gen nano bombs Alpine head unit...

    Is there a way to roll back one specific firmware w'update'?
    I accepted the new firmware update about 10 days ago..and I now have to 'reset / restart' my iPod 8 GB nano EVERY DAY...my Alpine head unit will just go into a 'searching' mode until I restart it...
    Thanks...
    8 GB 2nd Gen Nano Windows XP Pro

    1
    WHAT was the solution???

  • Alpine car head unit syncing problems with ipad 2

    I have just purchased an ipad 2 and I love it. I am setting it up in my car to use as a head unit. I want to control my car sound system using my ipad 2 but have it plugged into my Alpine head unit. Here's the dilemma, my head unit has two input settings. 1) An Aux input 2)ipod ready controller - The head unit has a cable that connects to the 30pin ipod doc and then I can control my ipod through my head unit. Here is the model head unit that I have
    http://www.alpine-usa.com/product/view/cda-105/
    Now I obviously can use the Aux plug in and that does work BUT the quality doesn't compare when using the ipod controller 30pin cable. The ipad 2 does sync to the head unit but I can now only control my music through the head unit. I want to still have control over the ipad 2. Is there any possible way to make this happen? Is there a setting on the ipad 2 or the head unit that I should be aware about? I really don't want to resort to the Aux just to have control...

    I've never used the 105 but have owned several Alpines. They traditionally do not allow iPod/iPad/iPhone control. You would need to get a Pioneer to use the 30pin connector and control is from the i device itself.

  • Alpine 9885 head unit now works with 1.0.1 iPhone

    My iPhone was not liking my Alpine 9885 head unit with iPod cable - the music came out of the iPhone speakers instead of the car speakers.
    With 1.0.1 firmware, the iPhone now operates correctly. Music comes out of the car speakers as expected.
    So, I guess there was a little more to 1.0.1 than meets the eye...

    I can't remember what head unit my alpine is that does the ipod interface but mine works great from day one. Is there a way possibly to add a microphone to the head unit and when I receive a call I'd be able to hear it via the speakers?
    I think I have hi-def radio, xm ready all that jazz of a head unit. no bluetooth inside, may be optional? can't remember.

  • IPhone 3G Lack of compatibility with Alpine CDE-9852 car stereo system

    So I have a Alpine CDE-9852 car stereo system along with the Alpine iPod adapter in my 1994 Toyota Celica and I've come across a little problem ever since I upgraded to iPhone 3G. See, when I had my 2G iPhone and plugged it in via the dock connector, my car's stereo system played what was playing on my iPhone. When I answered phone calls the music stopped and then continued when the call ended. Most importantly, when I was plugged it, my iPhone charged itself. Everything was great!
    When I bought my iPhone 3G though, something changed. My system still plays songs from my iPhone, stop when a call comes in, and continues when the call ends, BUT my phone no longer gets charged! I've tried messing around with the phone, but no luck. So I'm assuming there is a compatibility issue, and I realize a firmware from Alpine is highly unlikely, so my question for you all is: Am I out of luck on this or is it possible that something can be done to allow my 3G to charge via the car's ipod adapter? Also, could Apple solve this issue, by adding more compatibility to the next firmware? I would appreciate any feedback and incite on what can/can't be done. I'm planning to write/call Apple and Alpine to try and get to the bottom of this problem. It's just so disappointing that the old phone charged and the new one doesn't. Thanks in advance for the feedback.

    So you were right to assume I transposed the numbers, it is the 9857. Thanks for all the valuable info you have given me so far. Now, here is my question, I have an iPod adapter box, that cost me $100. Now I'm not sure what model number this is (I can find out once I go home this weekend), but I can tell you it is an Alpine iPod adapter box. Its what I used to plug in my iPhone for the past year and a half. I bought this back more than 2 years ago though, so I don't know if affects the 2006 compatibility time period, so possibly you could answer that once I get you the model number. So with the 422i, would it replace the ipod adapter I have now, or just change the cable that goes from the adapter to my iPhone? Also, the website talks about it as though it strictly supports iPods, is it compatibable with my iPhone? Also, will I be able to use an phone features with the new cable.
    So with the replacement cable you said it will do 5 volt, which is what I need for the iPhone right? I don't have a 120 gb classic, so I'm all set there. As far as connecting my iPhone, playing music from it, and charging it, is this cable my solution?
    Also, so the scoche adapter would solve all these issues as well? Including the needed charging area? Finally, do you know if there are any head units out there by alpine or anyone for that matter that would provide me (an iPhone 3G owner) with all the functionality I've been looking for PLUS phone capabilities? I'm not looking to drop an arm and a leg or get a big screen alpine head unit, but something that would broadcast my calls in the car through the system. I realize this might have to include buying a bluetooth unit, but I figure it might be worth it to get all that capability.
    Thanks again Jeddix for all your help.

  • Sony Head Unit and iPod Issue

    I just got the Sony Xplod CDX GT620IP head unit installed the other day and I'm pretty happy with it. The only problem is that I have the iPod Ready Feature (allows you to control iPod through the head unit). I plan on keeping an iPod in the glove compartment so that I have a hard drive full of music waiting in the car. However, when I turn the head unit and car off, the iPod is in the idle state, but displays "You may safely disconnect the device" even though the head unit no longer powers the iPod. When everything is off, the iPod will remain on until the battery dies out or if it's unplugged. I don't want to unplug the iPod, I just want it to shut down when the unit is turned off. Is there a way to fix this?
    EDIT: I have an iPod Nano, iPod Video, and the iPod touch, all of which experience the same problems (not turning off).If you have solutions for any of them, I'd be happy to know. Thanks in advance.

    Hi guys,
    Just signed up to these forums having done a google search for this same problem! I'm in the UK and this is affecting my 2008 CDE-9880R in exactly the same way Adrian describes - highly annoying having purchased this unit to avoid this kind of problem! So much for an Alpine/Apple collaboration!
    I am currently resorting to the 'pause' function on the headunit before keying off the ignition. Although I spoke to an Alpine tech guy at Alpine UK on the phone today and he is sending out another small lead that apparently goes inline with the current lead. He mentioned something about the headunit not recognising 80gb classics properly??? Not sure whether this will fix the problem but I'll keep you posted. I think a firmware issue is more likely to be the problem. At least Alpine seem to be aware of the problem and not just fobbing people off.
    Cheers,
    Mark.

  • IPod Touch with Alpine CDE-9852/KCE-422i

    Hello all,
    My iPod 4G is about to kick the bucket, so I was thinking about getting an iPod Touch to replace it as my main music player.
    I have an Alpine CDE-9852 stereo head unit in my car with the KCE-422i Full Speed iPod cable (has dock connector), which has worked beautifully with my 4G since I bought it in 2006.
    Will the iPod touch still work with my stereo? I know the dock connector is the same, but I guess I'm worried that the Touch is too new and won't interface properly with my stereo.
    Any help is greatly appreciated!

    Alpine support says, basically, live with it. I noticed in a review off the Crutchfield Web site that someone else was having the same issue. Actually, what Alpine CS said made sense. The way the unit is set up by default is to repeat the playlist/album that you are listening to in the car (much like many single-disc CD players start replaying the CD when they get to the end). So, when you disconnect the iPod from the hi-speed cable, it's set to replay all. It's really not been much of a problem for me. If I forget to switch it off after removing the iPod from my car, the worse that happens is that it replays whatever playlist/album I listen to the next time I use the iPod outside the car. And, as you and I both agree, it's great save for this one quirk.

  • My problems with Nokia Lumia 820

    I was a big fan of Nokia until two months back when I purchased Nokia Lumia 820. It's been two months and I'm having tough time with the handset.
    First it was the heat issue. I know smartphones are tend to get heated up due to processors. But my mobile gets heated up in less than 5 minutes when I play games like real football, wordament and even simple games. I thought I got a bad device out of the box. When I say heated up it's not warm, its hot and uncomfortable hotness. I can't hold my device until the heat subsides. I visited the Nokia care for raising the heat issue but they said they can't do much and updated my mobile to the latest firmware (1308) and asked me to check after the update and the heat issue is still the same. Just when I thought things can't get any worse it did. My mobile has visited Nokia repair factory already twice in less than two months of purchase. The first major problem occurred three weeks back when the display would be switching on and off randomly and finally the mobile got bricked. The screen went blank completely and the device was unresponsive. Along with that complaint I've again raised a complaint about the device getting heated up uncomfortably. 14 days after I submitted my device to Nokia care I got my device back only to find that the screen isn't responsive to touch in the middle within a week's time. The upper part and the lower parts are responsive, it's the middle strip that's not responding to touch.
    I've again given my mobile to Nokia care and they have sent it to the repair unit. In two months of my purchase the mobile has spent more than 4 weeks at Nokia repair outlet. It is still undergoing repair in the Nokia repair factory. I had least expected this from Nokia.
    Some of my friends who have windows 8 phones from Nokia haven't experienced any problems so far, not even heating problem. It's safe to say that the problem is only with my device.
    It's two months old and I've got it from the Nokia priority dealer.
    What'd you call a device which spends more than 40% of the time in the repair factory in two months of the purchase. Even the 3 months EMI's haven't been payed fully.
    I've encountered lots of inconvenience after purchasing the device.

    i am too having the heat issues..of nokia lumia..820 its been 1 mnth i hav been w8in for my nokia lumia to be in my hand...but..its giving too much problms..it gets soo hot widthinn 5- 1- mins.. highly dat i hav to end up d calll..n i kinda felt sensation on my thumb fingr. ..n i m also havin the hanging up issues..but yesterday my phn was hang n the phn was swwitched off...n its still swtich off..,when i chrg the phn no rexn is seen..
    what d hell is going on..n how m i getin a phn ?

Maybe you are looking for