Lumia 830 search button

Ihave purchased alumia 830 after my Lumia 920 screen was broken due to a fall on ground.
Now ihave put a glass screen protection on it to protect it but the search button only doesn't work.. The back button isn't working 100% also but its ok the problem is the search button completely unusable and i fear if i remove the protection the device will break like my previous 920
Should i send it to repair or this is hardware problem in 830

Hi, hasn216. You don't need to send the phone in for repair. Also, this is not a hardware issue. Check this link: The back key and search key of my Lumia 830 don’t respond properly. What can I do?. We suggest not using any protective film or tape on the phone's screen as the window Glass is Corning with E2C – easy to clean. Another workaround is swiping over the back key rather than tapping on it. Should you have additional questions, do not hesitate to post it here or if you have other questions, post it on the most appropriate board. BTW, the link is applicable regardless of location.
Thanks for the insights, farby and djsubha007. Keep it up! ;-)

Similar Messages

Lumia 830 capacitive button issues.

Hi there. Big fan!
I've purchased the at&t L830 recently, and so far its great. The one issue I have is the search button will sporadically not work, even when pressing it the exact same way as when it did work. Since the phone is still in its infancy, there's not much information out there on this issue, save for a few posts on wpcentral.com.
I've got a screen protector on it that makes the issue slightly worse, but even without it, the issue is still there. Did I just get a bad phone, or does this seem like it could be a software issue? The demo model seemed to work perfectly in the store. I will head back there and see about swapping mine out.

Hmm, I do have a colleague who bought a 830 just a week ago and over heard him complaining that he cannot use the search button as it does not respond so I know that it's the same issue as you guys here. Btw we are in Europe with a global unlocked version of 830
If this is indeed a HW failure, AGAIN, like the 930 has with the extreme heating and screen lifting it would be bad for MS . This is the reason why I have given up WP. I cannot accept spending hundreds of EURos on a phone with so many problems. I really hope someone there will someday test these devices before giving green light for mass production instead of putting us, users in a bad mood. You know, MS, it's not funny taking several rides to the local store for replacements because you cannot manage to do something right
I wonder how much do I have to wait for MS to deliver a working phone, without so many and so severe HW failures???

Lumia 830 Specs: Which model? RM-984 or RM-985

Hi,
Can we get a clear indication of the model described on the specs page? Ideally, for all phones where its relevant, but in particular for the lumia 830?
The specs for 830 (shown here: http://www.microsoft.com/en-us/mobile/phone/lumia830/specifications/) don't specify the model (RM-984,985,or something else). However, I have read there is a big difference in LTE band support between 984 and 985. In particular, the "international version" (984 i think, being sold on Amazon) doesn't seem to have the bands necessary to support T-mobile (1700/2100 and 700). If you read the specs page, you might get the impression that ALL 830's support these bands. Then perhaps go out and buy one that does not, and be mightly disappointed for the misinformation. "Thanks Microsoft". Again, its kinda confusing for consumers out there. Can someone who knows clarify which model is being described?
Secondly seeing as MS owns this thing now, can we pleae get some clarity around it on the specs page(s)? Same thing is true with some other phones I have been looking at, like the Nokia 1520 -- multiple models, different band support, missing details on the specs page, that could easily lead one to buy the wrong thing.
Thanks!
-Ryan
(a 'softie)

Any time you are not purchasing a phone provided by the carrier and you want to use it with that carrier it is up to you to do your homework and make sure you get the RM version that that has that carriers frequecy bands.
There is more than one discussion on the difference between the 983, 984 and 985 when you search the web.
http://forums.windowscentral.com/nokia-lumia-830/317284-nokia-830-rm-984-985-what-differences-print....
For the 1520 there is only the 940 and 938 that counts.
940 is the AT&T version, 32 or 16GB with PMA charging
938 32GB and Qi charging AT&T and T- Mobile LTE bands

Lumia Software : Lumia 830 ( UK : country variant ...

Lumia Software Recovery tool : Lumia 830 ( UK : country variant ) still showing Old software
it's 2 months to go , since we get over the air
why your software team is still sleeping
or may be they don't have knowledge YET
please a request - please told your team to update your server of this
product code : 059w5d2 ( RM-984 )
PLEASE
@Aakash006sharma
( Microsoft Enthuasist - Tech Expert )
if you like : press star button
Attachments:
Screenshot (5).png ‏135 KB
Screenshot (4).png ‏51 KB

Hi, aakash006sharma. The update available in WP Recovery Tool may not be the latest as it is recommended to do it over-the-air (OTA). We also suggest going back to the latest approved software provided by the tool and try updating it again via OTA. Let us know if you have any additional questions.

10133 ADF: How to stop search button to execute when there is an error

Hi,
I have two dropdownlists in a search criteria on a search page. The search result is at the bottom of the same page. The two values in the dropdownlists need to be validated when the search button is clicked. The validation logic is put in the searchBtn_action method binded to the search button. In the logic, when an invalid combination happens, I am able to post some error message on top of the page. But how can I stop the application to execute the sql statement? I mean if there is any method I can call to exit if there is an error? Thank you very much.
Regards,
Annie

This is most likely an optimization problem. I know such behaviour existed in the past with some functions and NI usually fixed it in some later release, but the recent changes in the LabVIEW compiler to use LLVM and various optimization improvements may have added this "feature" back in. The default value behaviour is certainly correct and consistent but the behaviour without default value feels not right to me for LabVIEW. In C I would say ok this is simply undefined behaviour and that means the produced code is entitled to even format your harddisk, since C explicitedly says all undefined behaviour is subject to choices by the implementor and is allowed to do whatever the implementor sees fit, including changing behavior between any version of the compiler.
But LabVIEW as a high level language has explicitedly so called default default data, which in this case should be used. Just having read a bit about LLVM I know they are wrestling with C undefined behaviour as well and LLVM being used a backend by several C compilers already has to deal with them. The reason that C explicitedly has many undefined behaviours is to allow various and sometimes significant optimizations, that could not be done, if the C standard would explicitedly require specific behaviour in certain cases (for instance uninitialized variables).
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

In the address bar, how do you get rid of the Amazon button, the "e-pub catalogue" button and change my search button to Google vs Babylon? Where is the button beside the forward arrow that would allow you to see your current history of links?

On my address bar, there is now a superfluous Amazon button at the right of the forward arrow where there used to be a button that would allow you to see your recent links. It's gone. In addition there is a useless "epub catalog" button and the search button is Babylon instead of Google. How do I go back to my working address bar.

Right click the Back / Forward buttons to get a list of sites you visited.
To reinstate Google as your search engine, do the following.
* In the location bar, type '''about:config '''and hit Enter.
* In the filter at the top, type: '''keyword.URL'''
* Double click it and remove whatever's in there and replace it with http://www.google.com/search?q=
* Go to File | Exit
* Restart Firefox, go to the site you want to set as your homepage.
* Go to '''Tools '''| '''Options '''| '''General'''.
* Make sure it says "''Show My Homepage''" in the first dropdown menu.
* Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.
The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
'''EDIT''': Remove the AmAzon button by right clicking a blank part of the tab bar and click '''Customize'''. Then drag it into the panel which opens.

Where is Search Button in Portfolio published to web?

While creating my portfolio in Acrobat 11 Pro, the search button is on the top right hand side of the window and works correctly. As soon as I publish the portfolio to a web, the button dissappears and I am left with just the "Layout" and "Files" buttons. This happenes in Chrome and IE. How can I get the Search Button to appear?

OK I have now tried the search engine on the web site approach and it works to a certain extent in that it shows the documents containing the search term. Unfortunately it doesnt highlight the terms in the document in the same way that the Acrobat Search does, so the search term has to be entered again and again into each document found. Ideally I want to be able to use the standard Acrobat search within my web. Any ideas?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

On Click of Search button, display the results in new tab or window

When i click on the search button on the top right in sharepoint 2010, i want to open the search page in either new tab or window,
By default, when we click on search icon it redirects to the OOB search result page. the only thing i need to change is to open the result page in new window or tab. so the users remains on the same page & will see the search results in new page.
Thanks, Kunal Govani

Hi,
You need to change the XSL of the Search Core Results WebPart.
This article describes how to achieve this:
http://blog.henryong.com/2007/10/27/how-to-make-moss-2007-search-results-open-in-new-window/. It is written for SharePoint 2007 but it can be used for SharePoint 2010 as well.
HTH!
Regards, Sjoukje
Web: http://sjoukjezaal.com | LinkedIn:
http://www.linkedin.com/in/sjoukjezaal | Twitter:
@SjoukjeZaal
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

How to remove default search button in search module

I am a neophyte with code and css and normally work with Muse. But I am currently trying to customize the appearance of the search module so that it works with the website it will be serving. I have accomplished a large part of what I've been attempting, but have hit a snag in removing the default search button (CAT_Search). I've placed the image I want to use no problem, but it is contained in some weird gray beveled box with the original 'Search' text overlapping my image.
I have been making the rounds of tech support, tutorials, and every documented article on the search module and can find nothing that address this specific issue. Any help would be greatly appreciated! I am enclosing the what I've done so far below.
Thanks!
Paula
<style type="text/css">
body form {
width: 163px;
height: 48px;
form-top-right-radius: 5px;
form-bottom-right-radius: 5px;
background-image: url(http://corehog.businesscatalyst.com/images/search.png);
.search-box {
color: #999966;
font-family: lato;
font-style: normal;
font-weight: 100;
width: 86px;
height: 24px;
border: none;
max-width: 86px;
opacity: 0%;
max-height: 24px;
margin-left: 12px;
margin-top: 12px;
margin-bottom: 12px;
.cat_button {
width: 32px;
height: 24px;
border: none
background-color: none;
background-image: url(http://corehog.businesscatalyst.com/images/search-button.png);
margin-left: 12px;
margin-top: 12px;
margin-right: 20px;
margin-bottom: 12px;
</style>
<script>var __adobewebfontsappname__="dreamweaver"</script><script src="http://use.edgefonts.net/lato:n1:default.js" type="text/javascript"></script>
<form name="catsearchform87352" method="post" action="/Default.aspx?SiteSearchID=3752&PageID=/http://corehog.businesscatalyst.com/search-results.html"><div><input class="search-box" type="text" name="CAT_Search" id="CAT_Search" /><input class="cat_button" type="submit" value="Search" /></div></form>
{module_searchresults}

Hi Ramandeep Nanda,
Thanks for the reply.
I followed a slightly different approach than the one mentioned in your post.
I have not used any client side javascript attributes.I got the inputListOfValues Component from the launch listener event ( launchPopupEvent.getComponent() ) and in the launch listener i am setting richQuery.setModeChangeVisible(false);
It is hiding the button now but only for the first invocation of the search dialog, it is not working.
More specifically, for the first invocation of the search dialog, Iterator facetNames = inputListOfValues.getFacetNames(); is not returning the child components and hence the button is not being hidden.
Any idea why this might be happening?
Thanks,
Vikas

Can I set an af:setActionListener on the search button of a af:query ?

Hi,
I want to store a flag in the session scope when the search button of an <af:query> form is pressed. The flag is used to determine if the query has been executed and the result table iterator should provide the result.
I'm still looking for a solution to handle the problem of an automatic query execution when a search page is rendered (see How to execute query only when user submits request in <af:query>
And the solution should work without Java code. :-)
Thanks,
Markus

Hi Frank,
thats a tough question. I have some opinions on how to implement it:
1.) Exposing listeners
Easy (?!) solution, needs managed beans as listeners.
2.) Exposing the commands. Make the commands like 'search', 'reset', 'save' ... accessible by creating extra JSF code for the commands in a facet when D&D the <af:query>.
I don't know if it is possible to implement such a solution, but the developer can extend or adapt easily the behavior to his own needs.
3.) Implement result of a D&D of a named criteria as a series to single JSF components. Each component implements an aspect of the <af:query> component.
Markus

When I use the Norton Safe Search box in Firefox 3.6.19 the letters that I type group together and disappear behind the search button at the end of Norton Safe Search....any help?

I don't know how much more I can add...However, when I type in the Norton Safe Search box up to the search button in Norton Safe Search I can continue to type but I can't see what is being typed because it doesn't allow me to see the trailing end of what I'm typing. This along with the fact that the letters and words don't always automatically advance a space, they group together as I'm typing and I have to stop, provide a space and continue once again. This only happens in Mozilla Firefox, I'm using Firefox 3.6.19. This doesn't happen in the Norton Safe Search Box in Internet Explorer

Maybe another extension that you have installed is causing that problem with that Norton Safe Search add-on.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
Disable all other extensions and see if Norton works correctly. <br />
I so, start enabling extensions one at a time until you find the culprit.
If not, create a new Profile and verify that Norton is the only extension that appears in the new Profile and see if it works correctly. <br />
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
If not, the problem is with the Norton add-on.

Class Cast exception when clicking Search Button in Query component

Hi
We have to implement the Query component in ADF programmatically.. We are using Toplink as the Model layer for ADF.
We followed the Web User Interface Guide for ADF development, Chapter 12 (Using Query Components) for the same.
We already have implemented the following classes:
1) QueryModel
2) QueryDescriptor
3) AttributeDescriptor
4) ConjuctionCriterion
5) AttributeCriterion etc.
We are able to see the Search panel in UI with selected fields in Basic as well as Advanced mode.
When we click on Search button, we are getting Class Cast exception.
The stacktrace of the exception is below:
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase INVOKE_APPLICATION 5
javax.el.ELException: java.lang.ClassCastException: view.QueryDescriptorImpl cannot be cast to oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryDescriptorImpl
     at com.sun.el.parser.AstValue.invoke(Unknown Source)
     at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1300)
     at oracle.adf.view.rich.component.UIXQuery.broadcast(UIXQuery.java:116)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:902)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:313)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.ClassCastException: view.QueryDescriptorImpl cannot be cast to oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryDescriptorImpl
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:374)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     ... 44 more
<RegistrationConfigurator> <handleError> ADF_FACES-60096:Server Exception during PPR, #1
javax.el.ELException: java.lang.ClassCastException: view.QueryDescriptorImpl cannot be cast to oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryDescriptorImpl
     at com.sun.el.parser.AstValue.invoke(Unknown Source)
     at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1300)
     at oracle.adf.view.rich.component.UIXQuery.broadcast(UIXQuery.java:116)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:902)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:313)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.ClassCastException: view.QueryDescriptorImpl cannot be cast to oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryDescriptorImpl
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:374)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     ... 44 more
Any help will be highly appreciated.
Thanks in advance.
Anup

Gary Tam wrote:
I am working on a project that utilize Oracle Ultra Search that will crawl and tag documents in the database.
The initial code that uses pure JDBC was working fine, but when we switch to get database connection from dataSource, we are getting classCast exception inside Oracle's ultra search. The problems is that the class we get from dataSource.getConnection() returns
"weblogic.jdbc.wrapper.JTSConnection_oracle_jdbc_driver_T4CConnection". But Oracle UltraSearch is not expecting that.
Is there anyway to unwrap the connection that we get from dataSource ? I tried casting to OracleConnection,
assign the connection to "oracle.jdbc.driver.T4CConnection" without any success.
Any help would be appricated.
ThanksHi Gary. If the code you want to run is running inside WebLogic, such as in a JSP,
then look for our documentation on our JDBC extension 'getVendorConnection()". It
will get you a direct Oracle connection for their mis-declared UltraSearch
classes (they declare they take java.sql.Connection, but they really demand a
concrete thin driver connection. No other Oracle driver will be given a chance).
Joe

Search button not displaying search results

I have created a page where you enter a string and click a search button and it will display the file that contains that string. It works on one page but not any of the other pages I have created. I went to dkubiceck page and copied the code for the search button there.
This is the code I used to run the query to bring up the document information:
select score(1) relevance, filename,transcript_id,
dbms_lob.getlength("trans_document") "trans_document"
from transcript_documents
where contains (trans_document, :P20_SEARCH, 1) > 0
order by 1 desc
I can run the script in sql workshop and it returns information but I can't get the page to display anything so I think it has something to do with the search button. Does it have something to do with the button request. I have the request as go which is what the Oracle Text for APEX tutorial indicates. I am at a loss as to why it is working in one place and not in another. HELP!!!!!!!

I used the Using Oracle Application Express to Build
Oracle Text Web Applications An Oracle White Paper documentation to create this button. The instructions to create the button is below.
http://www.oracle.com/technology/products/database/application_express/pdf/apex_text_application_v1.6.pdf
To create a button to submit the search:
1. Under Buttons, click the create icon ().
2. For Region, select Search Terms(s).
3. For Task, select Create a button displayed among this region’s items.
4. For Button Name, enter P1_FIND.
5. For Label, enter Find.
6. For Button Style, select HTML Button.
Run your page using the run page icon () and your development username and password. Your page should look similar to the following figure.
This was the instructions to create the query region:
To create a query region:
1. Navigate back to the Page Definition for the Search page. You can do this by using the edit links at the bottom of the running page, Edit Page 1.
2. Under Regions, click the create icon ().
3. For Region Type, select Report.
4. For Report Implementation, select SQL Report.
5. For Title, enter Results.
Using Oracle Application Express to Build Oracle Text Web Applications Page 9
6. Enter the following SQL query:
select score(1) relevance, doc_title, doc_url
from htmldb_documentation
where CONTAINS (doc_url, :P1_SEARCH, 1) > 0
order by 1 desc
7. For Display Conditions, for Condition Type, select Value of Item in Expression 1 is NOT NULL.
8. For Expression 1, enter P1_SEARCH.
This condition specifies to only display the Results region if a term is entered as a search criterion.
Run the page and enter a search criterion for Term(s). Your results should look similar to the following figure.
Figure 2.0
The only thing I added to the query above is a dbms_doc.getlength statement to be able to open a link to the document.
The first 2 times I created this on a page it worked just fine. But now no matter what conputer or schema or application I create this button in it won't display the results. I can admit that I have no experience creating a button with a different request than what comes up in the wizard. And the documentation that I found on creating buttons was of no help.
I have not made any changes to anything in the wizard so can someone guide me as to how to create a button that will allow me to search a document using Oracle Text as described above

How to get the Search Button from RichQuery Component

Hello All,
How can I get the Search Button from RichQuery Componennt, I could do not locate from getChildren, getFacets
any ideas ?
Thank you,

Not even able to get it from getViewRoot findComponent("clientId");
which is not good, RichQuery component can be inside popup and I do not want to add an extra button just to close the popup window
Any ideas ?
Thank you,

Lumia 830 search button

Similar Messages

Maybe you are looking for