Lumia 900 fails to search for LTE 75% of the time,...

LTE works fine once the phone bothers to look for it, but most of the time when I travel from an area with only HSPA+ (4G) to an LTE area, it stays on HSPA+ forever and never bothers to switch. Sometimes I will notice and turn on and off airplane mode to get the phone to pay attention to LTE. This happens in areas with 5 bars of LTE. I get 4.5ish mbps in HSPA+ there and 10ish mbps in LTE, when the phone notices it's there.
Does anyone else notice this? One person in the wpcentral forums did. I don't want to return the phone if it's a problem with the software like the other data bug. Unfortunately, I can't google this issue because all the results are about the other data bug that got fixed.

Feedback? Did any of this help?

Similar Messages

  • Steady Stream of "Searching for movie data in the file..." Error Messages

    My iMovie has been crippled by error messages that pop up whenever I try to accomplish anything in iMovie. I always see "Searching for movie data in the file 'healyintro.mov'" for a few minutes, then "The movie file 'healyintro.mov' cannot be found. Without this file, the movie cannot play properly." I cannot actually use iMovie because of these errors.
    I've tried everything from reinstalling iMovie to removing application support files to removing my iMovie Events and iMovie Projects folders to creating a .mov file, calling it healyintro.mov and seeing if that'll shut iMovie up – nothing works.
    Once in a while, iMovie will ask for a different movie file, with the same problem.
    Any ideas?

    I am having the same issue. I don't know what the previous poster means by allowing the system to continue, since I'm prompted with a "Cancel" / "Search" dialog after each missing clip. Slight digression: "Search" is not even the correct term here according to UI guidelines ("Choose" or "Locate" might be better choices given the file picker dialog that results).
    I'm actually using Aperture to relocate my video masters on removable media, which is a very nice feature of Aperture, but completely breaks iMovie unless it's connected. Seems like a pretty major oversight.... can we just have it fail more gracefully here and allow us to work with new stuff without getting hung up on missing movie clips from the past?

  • When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi.  It gives me a message unable to search for WiFi.  Before the upgrade to Lion it worked fine.  What gives?

    When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi.  It gives me a message unable to search for WiFi.  Before the upgrade to Lion it worked fine.  What gives?

    Could there be a setting I need to adjust in the iPad2?  When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks."  Is there a setting in iCloud or other location that needs to be changed?

  • Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

    Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

    Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
    #type '''about:config''' in the URL/Location/Address bar and press the Enter key
    #if you see a warning, accept it (promise to be careful)
    #Filter = '''browser.search.openintab'''
    #in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
    #close the about:config tab and test
    #See:
    #*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
    #*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
    '''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    About Google toolbar............
    Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
    *http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
    *https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
    *http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
    *Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
    '''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
    Alternatives:
    *http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
    *https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
    *https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

  • How do you search for a song in the latest version of ITunes??

    How do you search for a song in the latest version of ITunes??
    Yes this might be the stupidest question ever, but leave it to Apple to make the simplest thing hard.
    In EVERY version of Itunes, up until 11, you used to be able to type an artists name, song name, or album into the search field and it would narrow it down so that you can see what you are looking for (in the list below).  Now, Itunes tells you that you have music by said artist, yet doesn't list them whatsoever. Furthermore, when you click on the results it doesn't list them for you either.
    I'm sure it is some weird setting, but cannot for the life of me find.  I cannot name one application that doesn't show a list when you type in the search field.  Augh!
    Please help.
    G

    You can choose what it searches and where

  • Is it possible to search for multiple folders with the same name and...

    Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

    user11919409 wrote:
    Is it possible to create a Clone database with the same name of source db using RMAN ...
    yes
    >
    DB version is 11.2.0.2
    Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
    Handle:     user11919409
    Status Level:     Newbie (10)
    Registered:     Dec 7, 2009
    Total Posts:     102
    Total Questions:     28 (22 unresolved)
    why do you waste time here when you rarely get any answers to your questions?

  • HT204266 I have a iPod touch 4 and updated the iOS 6 and always when I try to search for an app in the App Store it won't let me because it always exits the App Store. Why is this happening?

    I have a iPod touch 4 and updated the iOS 6 and always when I try to search for an app in the App Store it won't let me because it always exits the App Store. Why is this happening?

    Have you tried resetting and restoring your iPod?

  • My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever...

    My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever... I have tried to reset the network few times, but not working.

    Hello Nazer_502,
    I would be concerned too if my iPhone was acting this way.  It sounds like it is overheating and not holding a charge. I recommend following the steps listed below when experiencing an issue like this:
    Battery life seems short
    Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
    Try turning iPhone off and then on again.
    Connect iPhone to iTunes and restore iPhone.
    If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
    When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
    Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Recently bought 4S, it keeps searching for network, reads invalid SIM, keeps searching for network, have switched the handset on and off several times, have tried 2 new micro chips, re set the network too ! nothing seems to be working !!! Iam in Delhi

    recently bought 4S, it keeps searching for network, reads invalid SIM, keeps searching for network, have switched the handset on and off several times, have tried 2 new micro chips, re set the network too ! nothing seems to be working !!! Iam in Delhi

    Obvious question... where did you buy your 4S and is factory unlocked?

  • How are people searching for music now that the power search link is gone?

    How are people searching for music now that the power search link is gone?

    That info in my above post doesn't bring back Power Search
    I think this Discussion holds the answer https://discussions.apple.com/message/20451945#20451945
    Found it under iTunes U!  Don't know why the moved it from the main page but you will find it here.

  • Lightroom has stopped running windows is searching for a solution to the problem"

    Lightroom stopped running on Vista 32 windows error message says "Lightroom has stopped running windows is searching for a solution to the problem"...Also some RAW images opened in CS2, Bridge or Lightroom have bands of different colors depending on the image and are unusable. At the same time Lightroom works fine on my laptop running Vista 32.

    Are you looking at the images at 100% resolution? Banding can appear in other enlargements due to rounding errors.

  • Is it possible to write a as3 code that will search for particular file in the loacal disk

    Is it possible to write a as3 code that will search for particular file in the loacal disk

    Not for a web-based design

  • Searching for Service Orders in the Archive in CRM 5.2

    Hi,
    I am trying to enable Searching for Service Orders in the Archive in CRM 5.2, in CRM 2007 this is done by a button being provided as standard and the user is able to toggle between views from the advanced search to search in the Archive. This also comes as standard in PCUI for the 5.0 version. But for the life of me I can seem to find how to do this in 5.2 without having a developer write code to enable the search in archive flag of the BTQuery1O  we are using the component BT116S_SRVO.
    I am trying to use the Archive Search function in SAP WebUi 2006s(5.2) to search for Business Transactions stored on the Archive fiel system.
    Thanks for all your help in advance,
    Kinika

    hi..
    we are also using KO8G and settling orders through background processing. In parametres there are options for period, year etc for selection.
      I could not understand ur problem. you creat a variant for orders to be settled. if you ar not getting the parameters in KO8G cosult ur ABAP consultant to get it.
    kkb/dsp

  • How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How to make repricing for specific conditions at the time of billing?

    Hello
    I'm SD Pricing person. Let me ask here experts below my concern.
    In EU countries, there is recycling fee in sales of electronics or Note PC with batteries....to keep our earth clean.
    So when customers buy such products, they have to pay more as recycling fee including invoice amount.
    My question is... we want to make repricing for recycling conditions when the billing is created.
    Based on our configuration, recycling condition is not defined as a kind of tax condition.
    So this value is just copied from sales order.
    (pricing type in copy control is 'G' which means repricing for tax condition.)
    In this situation, we want to make repricing for those conditions during operating system.
    Is there any easy way to cover this?
    As I think, this is not easy because the system is already operated.
    To change condition attribution is really risky. If we dare do, we have to migrate all open orders.
    So I want to put this way to the end of my choice.
    For this requirement,
    1. We have to change condition class or category or calculation type in order to be repriced based on pricing type 'G'.
        (ex. Set the condition category as 'I' inter-billing or 'L' always repricing.)
        But transaction data are created now and all open orders will be affected.
    2. To create new conditions are not easy because these conditions are mapped to the CO-PA value field and the values are posted in FI doc.
    3. To change pricing type in copy control is almost impossible because of the impact.
    What can I do this in this situation?
    What I want to do is just to make repricing for specific conditions at the time of billing in case that pricing type of copy control is 'G'.
    Thank you in advance.

    Let me ask agagin to all experts.
    I want to make A condition to be repriced at the time of billing.
    For this, I have to set condition category as 'L' (Generally new when copying).
    But I do not want to do in that way becauuse I am maintaining big operated system now.
    In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
    That is why I am asking.
    Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
    At last, what I want is not to be shown this condition only in billing doc.
    'A' condition should be displayed in both Sales order and Billing doc.
    And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
    Thank you in advance.

Maybe you are looking for

  • DatePicker not working

    Apex 4.1 I have created an application page with two date picker items, but when I click in the items the calendar popup does not appear. I've tried different values for the "Show" option - on focus, on icon click, both, and inline. The calendar icon

  • MS05 Long Term Planning

    I need  to stock available qty at long term planing (ms05) not calculate some location that qty status nettable. Example : Location   yy   stock onhand 100 EA   (Nettable)                 Location   xx   stock onhand 10  EA    (Nettable)      MRP    

  • IMessage doesn't work after the installation of the update 5.1

    iMessage doesn't work after the installation of the update 5.1

  • Keyboard in Number Pad mode missing return button

    Good day everyone, I've been googling for a way to show a keyboard layout for just numbers that contain the return key in it but I think until now (iOS 7) there is none by default, so I would have to built my own. If so, what technique would you guys

  • Wanting to access iTunes library on our iMac from our Mac Book Pro

    Hello - Can anyone help? Wanting to access iTunes library on our iMac from our Mac Book Pro - home sharing is switched on and can play both via Apple TV but how do I copy a playlist from the IMAC library to my library on the Mac book pro.