Lumia 920 Camera won't turn on after taking out of...

 Hi everyone! I have a problem with my lumia 920. Everytime I take it out of my jeans pocket, the camera won't turn on (from the side button or camera app). It'll open and show camera icons that i can't touch and then just exit out of the app. I usually have to reboot the phone (sometimes twice) and then the camera will work. Has anybody ran into this problem? I haven't reset the phone, but I don't want to because I have a lot of apps and data I don't want to lose. What should I do? Also, everytime I reboot the phone, my volume goes to 19 instead of staying at previous 30. Is this common with all windows phone? Please and thanks!

Yes I tried that and no luck. Now the camera doesn't work even after 3 reboots. I did the full reset on the phone and the phone got stuck on the spinning gears so i had to unbrick it and now I'm back and the windows start screen and the camera works. It's only a matter of time. I might have to get ANOTHER replacement device

Similar Messages

  • DV6915nr laptop won't turn on after taking out wireless card with it on

    AFter taking out my wireless card from my laptop, with it on, my computer now won't turn on at all. No lights come on in the front at all? Did I fry my motherboard?? Help please thanks

    you took the wireless card out while the laptop was switched on??

  • My iPod 5th gen touch won't turn on after running out of battery and then being charged for several hours

    I was using my ipod touch 5th gen, when it ran out of battery. I wasn't able to charge it all night because the lighting adapter plug broke, and so this battery sign and the lighting charger sign kept popping up telling me to charge it. It ran like that all night and when I woke up it wouldn't turn on at all. I tried plugging it into a few different computers to charge it, and after several hours it still won't turn on. I tried plugging it into my computer with iTunes up, but it still would not charge and my computer would not recognize that it was there. Anyone want to give me some tips?
    Thanks

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • HT6114 Camera Won't Turn Off

    Just downloaded the OS X Mavericks v10.9.2 update and now the camera won't turn off!  (green light is on constantly) and FaceTime still doesn't not connect. FaceTime says camera is not available, even though now the green light is on all the time. Any Suggestions?  Have restarted twice with no luck.

    This procedure may show which program is using the camera. It makes no changes, and therefore will not, in itself, solve your problem.
    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    Please triple-click anywhere in the line below on this page to select it:
    sudo lsof -Fc +D /L*/Cor*/*/*/AppleCamera.plugin | sed '2!d' | cut -c2- | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • HT1414 my reverse image camera won't turn

    I just paid $170 to have my screen replaced after I dropped it and now my camera won't turn to let me take selfies.  When I press that button in the corner, it goes from having an image of what the phone was pointing at to a blurry one and it won't change back even after I press the button to at least take a picture the other way.  I have to close the application and open it a few times before I can get it back to at least letting me take the picture going forwards.
    What to do?

    Sounds like a bad display screen. Try this first to make sure:
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Then reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
    If this doesn't work, back up and restore via iTunes. If the problem continues, restore as a new device and test. If the problem is solved, there is some kind of corruption in your backup file or maybe it's one of your apps causing problems. If it continues, take it to an Apple Store for evaluation of a possible hardware problem. I have the same problem.

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • MacBook Pro 15" won't turn on after a shut down.

    My MacBook Pro 15" late 2008 mavericks won't turn on after a shut down. Tried SMC reset, plugged and unplugged charger multiple times as well as installing the battery. It has started that after a while I have replaced my old battery with a new one,upgraded to Mavericks and increased my memory to 4GB. In the beginning after I would install every time the battery ,it' would turn on after 8-10 tries. Today it's completely unresponsive . Tested different outlets, with and without battery,nothing worked. I also heard that some other people have this issue once they have updated their operating system from  10.5.8 to Mavericks. Is that the problem.? Has anyone found a solution to this?

    Hi there Olgabinou,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    -Griff W. 

  • Hello... can anyone help, my late 2010 MBA's - OS X Lion 10.7.5 wifi won't turn on after a deep sleep

    can anyone help, my late 2010 MBA's - OS X Lion 10.7.5 wifi won't turn on after a deep sleep.. thanks..!

    Hi John,
    Thanks for the additional information.  What I would try next is resetting System Management Controller:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    If this still doesn't help, it would be time to take it in to be looked at.  You can setup an appointment at a Genius Bar by clicking on the following link:
    http://www.apple.com/retail/geniusbar/
    Best,
    Sheila M.

  • My N73 ME won't turn ON after I install PC Suite.

    My Nokia N73 Music Edition won't turn ON after I update the version of my PC Suite from V 3.0638.0.0.30 to V 4.0727.2.2.1
    can somebody help me with this I can no longer use my N73 ME now
    and I don't what to do to resolve this problem and I need your help.
    Personal Information RemovedMessage Edited by adisaily on 10-Sep-2007 06:30 AM

    Hey! Don't mind.
    First Off, you upgraded your phone, not PC Suit.
    You most probably did it by using PC Suit (PC suit uses Nokia Software Updater) to upgrade it.
    I suspect there was some fall out while downloadin or installin the updates.
    Earlier I would advise people to go to nearest Nokia Care centre.
    Now, the 3 fingers action might cure it well,though I'm not sure.
    The method:
    --The number 3---the * star----The green call key--- .
    If the phone still cant turn on.
    Then, if you have any warrenty and have a nokia care centre near you, make a trip to there.
    They will cure it.

  • 3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

    3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

    And when you held them neither the red Off slider nor the Apple logo appeared?
    If not then your sleep button is broken, you will need to get it serviced.

  • Mac 10.6 won't turn off after update

    Macbook air a1304 won't turn off after updating unless you push on/off button.

    Phone your nearest HP Support  to request warranty service. Worldwide contact info can be accessed here>Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • IPhone won't turn on after brief blue screen.

    My iPhone is currently broken, won't turn on after a blue screen appeared briefly. Won't even connect to my PC or iTunes. Won't even charge with my charger or using a new charger from a family member. Won't hard reboot by holding home top button. Anyone know what my situation is? Checked over the internet and couldn't find any similiar situations. Also this occured after i was browsing Reddit so nothing intense was occuring on my phone at the time.

    I'm afraid you'll have to get it looked at by visiting an Apple Store or Authorized Service Provider next to your place or by contacting Apple:
    Apple - Support - Service Answer Center

  • My Ipad air won't turn on after the new IOS7 update

    my Ipad Air won't turn on after updating to the new IOS 7.1.1. It ask me for my password I put it in, the apple logo appear and then it want off now it won't come back on. need help please

    Did you try this?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • IPad Air won't turn on after opening the smart case

    iPad Air won't turn on after opening the smart case cover, it does not do it all the time but enough to concern me

    Take both the iPad and the Smart Cover back to where you bought them for an evaluation. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Deleting all emails for 1 of 2 email accounts in the Message area

    Background: I do not have Blackberry Enterprise ServerI have 2 email accounts setup on my Blackberry Pearl 8130:  1 personal Yahoo account and 1 work account  Everything works fine, I receive email for both accounts, all is good.  Except that I get 2

  • Ipw2200-fw startup bash

    Whenever I boot up my computer, I must run ip link set eth1 up wpa_supplicant -B -Dwext -i eth1 -c /etc/wpa_supplicant.conf dhcpcd eth1 or the wifi card wont work. The only solution I can think of is to make a bash script containing these commands an

  • Enhance PO details screen

    We have a need to enhance the PO detail screen (supress buttons and add new columns). As I understand this is a webdynpro based screen. So do we need to use POWL for that? Thanks. Anuradha.

  • Handling error msg in JSPDynPage

    Hello,    I am doing a replica of an SAP R3 std report in portal. I've converted the report pgm to a BAPI. My question is how to populate the BAPIRETURN table with the error messages raised from a std report? I mean how to capture these error message

  • The Disappearing Image(s)

    Apple Mail Version 5.2 (1278) Howdy, I wonder if anybody has come across this Mail problem.  When I send HTML e-mail it puts a copy in the Sent Box.  The HTML only displays some of the images. (see JPG)  Yet when I click down on the left red box on a