Lumia 920 Not Displaying Anything

Hey everybody! I was trying to hard reset my phone when all of a sudden it got bricked. It got stuck on the spinning cog wheels for a good two hours, so I decided that I might as well try to unbrick it with this guide: Tip: How to fix a bricked Nokia Lumia 920 | Windows Phone Central Well, that didn't go all that great. It turns out now my phone won't even display anything. It's just a black screen, a plain black screen. When I plug into the computer it still makes the noise but other than that nothing will else will work. Is there anything I could try for now or is a complete goner? Someone else had the same issue and I'll quote him, as it's a bit more descriptive: "Hi guys,
I've a Nokia Lumia 820 who is bricked and have nothing displayed on screen, no spinning gears, no lighting... So I've tried the step here and the Nokia is detected by Windows (tried on 7 x64, 8 x64, and a XP VM), but strangely detected and no detected (like plug-in and plug-out) and then the Volume Down + Power don't do anything.
Some one have idea to make my Nokia working again... (i've an old iPhone for now... help me please ! )
Etienne"
That was a comment made at the very bottom of the guide. I'm having that same issue. Thanks for any help that I can get.

The only solution left seems to be a visit to Nokia Care. Be informed that you have already voided Warranty by following unauthorised process mentioned in the link pasted by you ..BTW, there are quite a few suggestions on THIS Forum (to resolve your original problem) that you would have tried without voiding the Warranty.

Similar Messages

Nokia Lumia 920 not displaying sent or received te...

Hello,
My 920 has recently been having problem with displaying text messages. They would send but would not save in the threads. Also I would recieved messages I would be notified and can see on the lock screen but when I go into my threads it would not show up. This is happening to certain contacts. Also, regardless of texting the order of my contacts in messages to not change to most recent person I have contacted. I've tried soft resetting my phone but it hasn't helped. I am currently on EE/Orange. Can anyone help me with this?
Thanks for the time and help.

Did you try the reset from Settings>About or the 2 button vol down + power reboot? If it was the reboot you tried then it may be worth trying the reset at this stage. Remember to backup your phone before hand.

HT5429 maps on iphone 5 do not display anything

Hi everyone. I recently bought a new iPhone 5 and I have a serious problem with my maps app. It does not display anything I search except the grid lines and pins. please help how can I fix it. pls send the instructions at [email protected] Thank you in advance.

It is not a good idea to put any kind of personal contact information in such a public forum.
First, close the maps app. Double click the home button. At the bottom, press and hold any app until a red circle appears on the top of each. Tap the red circle on the Maps app. Next, reset the phone: press and hold the power and home buttons at the same time until the Apple logo appears. Ignore the red slider if it appears.

Compaq 615 not displaying anything

I was updating the Windows updates. then when It was displaying the message "do not turn off your computer. Windows is updating. " I mistakenly kicked the power pack cable and it removed it from the socket then the laptop turned off because I was using it with no bttry. When I switched it on its not displaying anything even the Windows f8 stage is not reached. how do I fix this problem. It's not getting in bios as well

bpali2001 wrote:
i have an adc 23 apple cinema hd display. that gets some power for the button backlights but no signal. i tried the dvi out with an other monitor. that gets no signal also. could resetting the PMU twice in a quick succession (accidentally) cause this problem?
Can you answer BDAqua's last question please…
BDAqua wrote:
I believe we have a PSU or Logic Board problem, using the DVI monitor does alt key on power up bring up anything on the display?
We need specific confirmation otherwise steps may be missed & nothing is resolved.
We also need to know about what tones you hear on startup - are you hearing the normal startup tone or something else?

My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

mrdctaylor wrote:
Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
Thanks!
Apple have changed this setting with the Apple TV Software Update 5.1:
About Apple TV (2nd and 3rd generation) software updates
Feature
Summary
Shared Photo Streams
Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
AirPlay
Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
iTunes account switching
Save multiple iTunes accounts and switch quickly between them.
Trailers
Search movie trailers. In the United States, see show times for local theaters.
Screen savers
New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
Main menu
Reorder icons on the second page by holding down the select button on the remote.
Subtitles
SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
Network configuration
Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
Stability and performance
Includes general performance and stability improvements.
If you don't like this, you can leave feedback here: Apple Feedback

ST06 - detailed Analisys - OS log not displaying anything

Hi Experts,
ST06 -> detailed Analisys -> OS log not displaying anything in my developement system. When I clickon the OSLog, it is giving the error message "<b>error message:Invalid Parameter
Please check your Saposcol and your CCMS Agents</b>"
I have already stopped and started the SAPOSCOL. even though it is not working still...
Please help to resolve this isssue.
Thanks,
Madhuri.

Hey Madhuri,
Did you get your issue resolved ? I 'm also facing the same problem.
If u hvae resolved the issue, do tell me how..
Regards
Rahat

Nokia Lumia 920 - Not connecting on MAC OSX 10.6.8

Hello everybody,
I have this problem that alot of people are encounting but it seems having no solutions yet.
I bought my Nokia Lumia 920 a couple days ago, made all the updates alvaible but still I can't connect my phone to my MacBook Pro.
The funny part is that my dropbox application on my mac detect my phone and tries to import my pictures where neither iTunes or Finder are able to recognize my Nokia.
The all support we got is to download a app which is not working for the OSX 10.6.8 and they seem to force us to upgrade to the 10.7 OSX.
It is my right, as a consummer, to choose to OS I want for my laptop and it is to both Windows and Nokia to make their devices compatible to their customers computers.
So here is my call to all Nokia and Windows developpers: Do not ignore us, there is a problem and the first step in order to solve it is to recognize this problem.
The least you can do is to tell us that you are currently working on it because I feel all alone in the dark but I am pretty sure I am not alone and you might loose some clients that are delighted with your phone but really "**bleep**" off the way that they are treated in the process of solving this important problem.
Thank you for your time and comprehension,
I am looking forward some advices from any developpers.
JyCey

I have to raise a different view point. Many users of macs are ordinary, non-techie people, who simply want a machine to do basic things. I know people with very old macs, and they are happily using them for simple purposes. I have 10.6.8, and any upgrade would cost me some money to upgrade parallels. Macs can run for years, and I believe that it is important for equipment to be able to be used for long periods of time, if the user wishes. Also, earlier OS are very commonly unsed in coutries where money and internet is not as available as to many of us.
I also use a mac with XP as I need a small install base for only one PC based software that I occasionally use.
As a developer, I would expect them to look at the actual installed back of OS, and realise that some simple functionality should be backward to existing users. The ability for a phone to connect to earlier OS is something which I did not even think about - I thought it would be automatic. Its also not that difficult to develop.
The forums are awash with frustrated new pruchasers of Lumia phones, suddenly realising that their expected functionality with PC Suite, etc has now gone. Many of those people are very frustrated, and they will pass on their frustrations to others, and sales will be affected.
I have been a Nokia user now for about six years, and I have watched the same frustrations of users, requesting Nolia to develop expected connection, integration, and sync software that other phone manufacturers seem to be able to do. Finally, a reasonable PC Suite version is now developed, but not compatible with Lumia?? Do we have to go through the whole waiting thing again? Why cannot Nokia look at this not as a software problem, but an expected functionality feature.

Adf region is not displaying anything

Hi,
I am using adf region to display the data.For this I have created one bounded task flow with page fragments.
In the page fragment I created one output tag to display something.this page fragment is dropped in task flow.
Then I made one JSP page and drag the task flow and drop it as the region.The problem is it not displaying any data.
I am using jdev 12. Can you please tell me whether I am doing anything wrong.
Thanks,
Harsh

What do you mean by
Then I made one JSP page and drag the task flow and drop it as the region.
Did you create a jspx page or a jsf page. Depending on the fragment type it only works on a jsf page (jsf 2.0 page). 12c default is create fragments as 'Facelets' which only work in jsf Pages. If you want to use a jspy page you have to create the fragment as 'JSP xml'.
Timo

Lumia 920 not working on 3G, **bleep** mobile ... ...

I have purchased Nokia Lumia 920 month ago. First loaded with Lyca SIM (providing service on telstra network), phone call and messages were working fine but mobile data never worked on the phone. I thought it might the issue with Lyca network. First of all, it was not showing the 3G in the status bar, instead it was showing up pointing triangle. According to Nokia manual it is a sign for roaming data. Though it was a roaming it should work because in setting I set data on roam. I hope it should work but it was always complaining about the data network not available. When I was using that sim with my iPhone 4; though it was slow, it was still working. So I never bothered to make it working with Lumia 920.
Recently I moved to Kogan Mobile SIM (Providng better service than Lyca on telstra network), which really have good data connectivity. Now it is showing 3G symbol in Lumia 920 status bar but whenever you try to open any application, or even a browser it says no connection. And the same sim card I place in iPhone 4, it is working with good speed and better connectivity.
Can someone tell me is that the phone settings issue, that I havent set something properly or this phone it self is **bleep**?
I appericiate some responsible & helping response from the Nokia staff or customer service.

As this is a peer forum and not a 'Direct to Nokia' one you can go here to get a response from Nokia if you must.
First of all the Triangle indeed means you are roaming. Roaming means nothing else but that your are not using the network belonging to your operator but that you are in fact using another carrier's network as a 'guest'. In your case the network belongs to Telstra and lyca is the operator. Depending on how the operator sets up te network they will either appear to roam or appear as the 'main' carrier. For you this makes no difference but if so you would have to have the option to allow use of data while roaming set in Settings>mobile network>Data roaming options
In addition you will need to set up the correct access point in Settings > access point which should be the network for your operator, not for the host network. If you see the settings tap them to activate or add the Internet (and MMS) settings manually if not. The correct settings should be available through your operator.
If you do not yet see the access point settings option in Settings go here to download them.
If you have any further questions feel free to ask and remember.. deep breaths..
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

TS3274 My ipad display will not function, the screen will not display anything when turned on, you can see that the screen lights up but it is completely black

The screen on my iPad will not display, the screen lightens up when powered on but the screen stays black, any fix for this that I can do at home?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Onboard Graphics Card Not Displaying Anything

I got a free MS-7613 (Iona-GL8E) motherboard from my friend 's friend which was fully working, he upgraded his motherboard and no longer wanted/needed it. This is the first PC I have ever started to build, I've worked on the, before and know a reasonable amount about them, but the problem I have with this is, the onboard graphics card doesn't display anything. I tried via VGA and HDMI on a monitor and TV, both outputted nothing. The wire and monitor definitely work. The motherboards seems to work fine, it used to beep when it had no RAM, since then I bought RAM and it's been fine. I had a graphics card in but removed it as it also displayed nothing. All the USB drives work and it turns on fine, it just display nothing. Could it be because it had a graphics card in perviously and doesn't display anything because of that? Any help would be great!

Hi, "Beware of greeks bearing gifts." Obviously there are reasons why you have ended up with a hand-me-down. One might be a bad motherboard graphics processor. You need to provide more information about your hardware configuration. Additionally, contact your friend and find out what HP product was the motherboard installed in so we can look for specific information. Post back when you have more information.

Macbook pro does not display anything

Model is Macbook Pro 15" Mid 2009 Unibody
Mountain Lion
Modifications:
CD drive replaced with additional 500 GB Hard Drive
One of the 2 GB RAM chips replaced with a 4 GB chip
Earlier today I was browsing the internet on my MBP and suddenly the laptop froze, the screen froze, the mouse and keyboard were not responding at all, which eventually led me to have to force shut it down (by holding the power button). When I tried to turn the laptop back on it started up (as in I could hear the fan and the white light came on) but there was no display and then 4-5 seconds after it turned off and then started up again by itself and stayed on, still no display on the screen at all, its off and the keyboard doesn't seem to be responding either which I figured by trying to press the caps lock button to see if the green light comes on in which it didn't.
I have tried pressing the Ctrl+Shift+Alt+Power button and then turning the laptop on but the same problem still persists. The laptop starts up, turns off and then starts up again and then stays on with nothing displayed on the screen and no response from the keyboard. The start up chime also doesn't occur. I am unable to start the laptop in Safe mode or any other mode that requires me to hold a button when powering up as the laptop turns off after 4-5 seconds and then starts up again. I have looked online to find anyone with a similar problem but can't seem to find any posts regarding this.
The laptop has not been dropped or anything, neither had it experienced any liquid damage. It has been running smoothly before the problem that occured earlier. I am in desperate need of my Macbook Pro and there doesn't seem to be any Genius Bar appointments available in the next 7 days in any Apple store near to me (Central London).
Any help or advise will greatly appreciated.
Khal

Make that genius bar appointment and wait those seven days. That is your best option to get it diagnosed properly (for Free).
Ciao.

Dbms_output.put_line not displaying anything

I am running the below code (ssn_run.sql) using sqlplus 10.2.0.1.0 on my windows XP professional client PC.
The database is a Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit running on Solaris
I cracked my head for about one hour but couldn't figure out this :
accept input_ssn prompt 'Enter SSN :'
set feedback on
set serveroutput on
set echo on
set term on
set heading on
set pagesize 0
set linesize 10000
set verify on
undefne sdate input_ssn
col sdate new_value sdate
col input_ssn new_value input_ssn
select to_char(sysdate,'YYYYMMDD') sdate from dual;
spool C:\PERSON_DATA_&&sdate._&&input_ssn..TXT
select 'REPORT GENERATED ON : '||SYSDATE FROM DUAL;
begin
select personid into v_personid from person where SIN = '&&input_ssn';
INSERT INTO PERSON_OLD
(PERSONID, TITLE, FNAME, MNAME, LNAME, ACFM, SIN, UNAME, AKANAME, DCFM,
IROWID, SUFFIX, PTYPE, OLD_SSN)
SELECT PERSONID, TITLE, FNAME, MNAME, LNAME, ACFM, SIN, UNAME,
AKANAME, SIN FROM PERSON WHERE SIN = '&&input_ssn';
INSERT INTO MEMBER_OLD
(CLNT, MKEY, PERSONID, MEMNO, OLD_MEMNO)
SELECT CLNT, MKEY, PERSONID, MEMNO,MEMNO
FROM MEMBER WHERE PERSONID IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn');
UPDATE PERSON SET FNAME = TRANSLATE(SIN,'0123456789','ACEGIKMOQS'),
LNAME = TRANSLATE(SIN,'0123456789','SQOMKIGECA'),
UNAME = TRANSLATE(SIN,'0123456789','ACEGIKMOQS')||' '||TRANSLATE(SIN,'0123456789','SQOMKIGECA'),
AKANAME=NULL WHERE SIN = '&&input_ssn';
UPDATE MEMBER SET MEMNO = MKEY WHERE PERSONID IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn');
for i in(select personid person_other from person_relation where relpersonid in(select personid from
person where PERSONID = v_personid))
loop
dbms_output.put_line('i.person_other is : '||i.person_other);
UPDATE MEMBER SET MEMNO = MKEY WHERE PERSONID = i.person_other;
end loop;
EXCEPTION
WHEN OTHERS THEN
     ecode := SQLCODE;
     emesg := SQLERRM;
     dbms_output.put_line('Error while data scrubbing: Error code is : ' || ' - ' || ecode);
     dbms_output.put_line('Error message is :' || ' - ' || emesg);
end;
spool off;
set term on
set feedback on
set HEADING on
set verify on
--End of code
The SELECT statement that comes in the for loop should return data as v_personid has a value. (I tested this by a select statement)
However, I am just not able to display the line which comes in the inner loop :
dbms_output.put_line('i.person_other is : '||i.person_other);
The result of this dbms output put_line neither shows up on the screen, nor it gets written to the spool file...I am stumped with this...
The other dbms_output put_lines that display error displays okay, but not the one in the inner loop.... Can someone help me out if you see any obvious issues here........
Also my UPDATE MEMBER statement inside the for loop doesn't do anything whereas it was supposed to update a row !!
Thanks

You could display the number the query return by adding;
v_count number;After you assign v_personid;
dbms_output.put_line('v_personid is : '||v_personid );
(select count(*)
into v_count
from person_relation
where relpersonid in(
   select personid
   from person
   where PERSONID = v_personid)).
dbms_output.put_line('v_count is : '||v_count );

Finder not displaying anything

Recently the finder on my macbook air has quit displaying all programs, the only files that appear in finder are the ones in desktop, but when opened they also appear to be empty. I know that the software hasn't been deleted or anything because i can find it using spotlight. Any help?

Not sure how you did the SMC reset however here is the correct way, try that first. It's OK to do 2-3 of them.
SMC RESET
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that still doesn't work re-start the compute in Safe Mode, it's possible a cache may have become corrupted. A Safe Mode reset will clear some caches.
If the SMC reset and Safe Mode restart don't help then reinstall OS X using the Intall USB drive that shipped withe computer. Don't worry it won't affect your data at all.

IPad does not display anything !! (white screen)

Hey,
I have a strange problem with my iPad(16GB WiFi). It turns on but the screen turns white (nothing display… Not even Apple logo)!!
It responds to my interaction … For instance, I can slide to unlock it (of course, I cannot see it but I know where it is located)
I try to restore it through iTunes, it did but it does not fix the problem !!
In other words, everything is working but you cannot see anything on the screen.
Please help !!??

Searching broadly through discussion areas, such as Safari, iPhone, Mac, etc. getting a white screen is common. Apparently this can happen while logged into sites such as Google. Apple seems not to know or care about this issue, since no one from Apple answers any of these messages.
I managed to bring back Safari from the dead by going to iPad Settings for Safari and cleaning out Cache, Cookies, History. Don't know why this helped.
Am wondering what would happen if I downloaded Firefox to my iPad and started using it instead. Firefox has worked wonderfully on my other machines - Mac Pro at work, Windows 7 at home.

Lumia 920 Not Displaying Anything

Similar Messages

Maybe you are looking for