Lumia 920 pre & post processing of pics after Ambe...

Hey folks, im starting this thread in order to grab more attention from Nokia. As they are already aware of the yellowish tint in photos since the amber update, I wanna just add something extra. I have attached 2 sample images of pictures below. Both photos were shot at ISO3200 to really show what this phone is capable of. Each picture will come with a before processing happens and after. Not only can you tell theres a yellowish tint in the post processing pics, but you can also see severe noise reduction. Sure, ISO3200 is a bit on a smartphone, but take a close look at the pics before the processing happens and tell me that isn't a amazing picture at ISO3200. White balance is spot on, and sharpness is excellent. Im sorry, but the aggressive noise reduction Nokia applies is not needed on this phone. Nokia I think most people buy these lumia 920 and 1020 phones based on cameras. I think most people can agree that while we may not ask you to remove your noise reduction settings, but rather add an option for us users who would like to skip out on the post processing that happens. You can clearly see in the before and after pics below how amazing an ISO3200 shot from this phone is.....let us have it please!!!
Attachments:
After Processing.jpg ‏3241 KB
wp_ss_20130912_0005.png ‏1705 KB

THE OTHER COMPARISON HERE:
Attachments:
After Processing (2).jpg ‏3166 KB
wp_ss_20130912_0006.png ‏1597 KB

Similar Messages

  • Lumia 1020 - Disable Post Processing?

    Preface:  I've only had the Lumia 1020 for 48 hours.
    Problem:  I've noticed that when taking pictures with the Nokia Pro Camera application, the preview after capturing the image is awesome.  If I then go to look at the captured image, there is a short pause, and suddenly the picture goes soft, detail is lost, colors become horribly skewed.   It would seem that there is some massive post processing being done after the image is archived.
    Request:  Is there any way to disable this post processing?  It's taking wonderful pictures and destroying them.
    I'll see if I can take a screen capture to show what I'm talking about and I'll post again after work.
    Lumia 1020 Quirks.
    - Post processing done even on "raw" 34MP images.
    - The entire screen is powered when using Peek. Despite being OLED and Nokia specifically stating otherwise.
    - Can turn on (but not off) camera in the background on a call. App doesn't open but shutter does and spins up CPU.

    So after looking at the 5MP version (attached) it seems that it is indeed post processing it after the fact and saving it that way.  Which begs the question.... Why?  Isn't the photo review going through the Nokia Pro Camera app anyway?  Why is it doing post processing (I've also had it remove red-eye automatically when reviewing photos)?
     Stil, I want to know; how can I disable it?
    *Edit:  Trying to attach the large format photo as well...
    *Edit2:  After uploading both and flipping back and forth between the "review" image, the 5MP saved image, and the highres saved image, they are all the same, meaning that it is doing the post processing as it is saving the 5MP & 34MP image.  This means there is no way to truly undo it.  (It also means things like auto-redeye reduction are permanent, and can't be undone, tweaked, etc.)
    So.... thoughts?
    Lumia 1020 Quirks.
    - Post processing done even on "raw" 34MP images.
    - The entire screen is powered when using Peek. Despite being OLED and Nokia specifically stating otherwise.
    - Can turn on (but not off) camera in the background on a call. App doesn't open but shutter does and spins up CPU.
    Attachments:
    WP_20130812_12_46_36_Pro.jpg ‏2045 KB
    WP_20130812_12_46_36_Pro__highres.jpg ‏10902 KB

  • Pre/post processing

    Hello group!
    Configuration:
    Oracle 8.1.7
    XDK 9.0.0.0.0(beta)
    We use XSQL Servlet scripts (great framework!). We tried to provide single entry point into our webapp. We want to replace XSQLServlet class, and gain control of our servlet environment (transactions, thread synchronization, logs...).
    Problem is, if we replace XSQLServlet class with our own class (which extends HttpServlet), we can't use XSQLPageProcesor directly because it is declared private for XSQLServlet package.
    So, we try to use XSQLRequest class and construct an instance with XSQLServletPageRequest as parameter and then call XSQLRequest.process().
    It works ,but ...
    When we attach object with setRequestObject (), requestProcessed is never called.
    Why? We mist something?
    If we use XSQLRequest (URL url), must we handle sessions, request parameters, cookies ...?
    Where is the best place to put pre/post processing of request?
    Thanks in advance
    Tomi
    null

    We found just XSQLPageRequest.setRequestObject(), that we already try to use (first post in thread).
    We associate *.xsql with our HttpServlet because we want to transparently add controller object(s), and we want to turn this feature off in servlet engine config whenever we want. If we forward it (getServletContext().getRequestDispatcher().forward()), with same name and extension ...
    Some code:
    public void doGet(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
    XSQLServletPageRequest req = new XSQLServletPageRequest(request, response, myContext);
    //TransactionController implements the XSQLRequestObjectListener
    req.setRequestObject("transaction",new TransactionController(req));
    XSQLRequest xsqlrequest = new XSQLRequest(request.getRequestURI(), req);
    try
    xsqlrequest.process(response.getOutputStream() ,new PrintWriter(System.err));
    catch(Exception ex)
    ex.printStackTrace();
    return;
    }When we call XSQLRequest.process, servlet response just fine (except we lost default encoding windows-1250?).
    TransactionController is properly attached, but requestProcessed is never called.
    We found why. Maybe?
    XSQLRequest.process call createNestedRequest from XSQLServletPageRequest, and then setIncludingRequest.
    This seems like little overhead :)
    We just want to keep our XSQL Scripts clean from including controllers via custom actions in every page.
    Can we do that?
    Anybody tried something similar?
    Thanks for your time
    Tomi
    null

  • Pre-Post Processing Examples

    I'd like to learn more about how to use the Pre-Post Processing feature in the Apex Listener.
    Does anyone have any examples or documentation on how to do this?
    Thanks,
    C

    So i've answered my own question in part:
    Here is what I did:
    1. created a procedure named web_log_prc that inserts some session data into a table (web_log) in the Apex Application's parsing schema.
    2. granted execute privileges on that procedure to apex_public_user.
    3. In the post-processing text field in the apex listener admin page i entered the name of the procedure: <username>.web_log_prc
    Now when I click around in the app, rows get generated in the web_log table.
    My intend was to capture Oracle session data and tie it back to a particular Apex user. As expected, the username logged is apex_public_user.
    Is there a way to capture the session identifier that the connection pooling mechanisms use to send the data fetched from the database back to the correct Apex user?

  • Lumia 920: Internet Sharing no longer works after...

    I have a Lumia 920 that's a developer build that was provided at Microsoft Build.  After the latest OS update, I am no longer able to start Internet Sharing.  I receive a notification that I need to upgrade to a plan that supports mobile hotspot.  I am already on a plan with T-Mobile that supports mobile hotspots.  I confirmed this with a T-Mobile rep and they suggested I contact Nokia.
    Thank you for any help.

    Yes, unless you have completely reformated the device.
    now,use Japanese.
    crazy strange fix, but that's what I had to,do.

  • Trouble with Pre/Post Roll tape, before/after segment... what the ****.

    I'm getting alternating error messages...
    "capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape.
    To capture as much of your footage as possible, please capture a clip that ends before this segment, and another one that starts right after it..."
    And then something about Pre/Post Roll tape, basically the same thing as above.

    I'm getting alternating error messages...
    "capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape.
    To capture as much of your footage as possible, please capture a clip that ends before this segment, and another one that starts right after it..."
    And then............
    "Batch Capture: Timecode error: Unable to locate the specified timecode. You may have specified a timecode with insufficient room for a pre/post roll operation."
    Am I doing something wrong here???

  • Lumia 920 Camera won't turn on after taking out of...

     Hi everyone! I have a problem with my lumia 920. Everytime I take it out of my jeans pocket, the camera won't turn on (from the side button or camera app). It'll open and show camera icons that i can't touch and then just exit out of the app. I usually have to reboot the phone (sometimes twice) and then the camera will work. Has anybody ran into this problem? I haven't reset the phone, but I don't want to because I have a lot of apps and data I don't want to lose. What should I do? Also, everytime I reboot the phone, my volume goes to 19 instead of staying at previous 30. Is this common with all windows phone? Please and thanks!

    Yes I tried that and no luck. Now the camera doesn't work even after 3 reboots. I did the full reset on the phone and the phone got stuck on the spinning gears so i had to unbrick it and now I'm back and the windows start screen and the camera works. It's only a matter of time. I might have to get ANOTHER replacement device

  • OPENSSO PRE/POST PROCESSING ATTRIBUTE FETCHING VIA POLICY AGENT

    Is it possible to apply filter or post processing when fetching attributes from open sso using a policy agent? If so, do you know if the process is documented and where or under what search criteria should I use to start my search?
    Assume the following attribute (keys) can store multiple values:
    Keys:
    A | 1 (key 1)
    B | 4 (key 2)
    A | 7 (key 3)
    Is there a way to only extract the key values of B | 4 instead of all of the key values (keys 1, 2 & 3) ?

    Is it possible to apply filter or post processing when fetching attributes from open sso using a policy agent? If so, do you know if the process is documented and where or under what search criteria should I use to start my search?
    Assume the following attribute (keys) can store multiple values:
    Keys:
    A | 1 (key 1)
    B | 4 (key 2)
    A | 7 (key 3)
    Is there a way to only extract the key values of B | 4 instead of all of the key values (keys 1, 2 & 3) ?

  • Nokia Pro Cam photos post-processing makes yellowi...

    Hello there! I'm here to report a common problem which happens while taking pics with Nokia Pro Cam on my lumia 920. When you take a pic it has right colours and is very sharp but after apps' post-processing the pic turns yellowish and a bit softer. It doesn't look too good after that treatment. I'm asking for patch that would prevent this problem. While I was at Windows Phone central-forums I saw that I'm not alone with this issue.
    There is photos when one can see this issue.
    First is just after taking pic and second is after processing it. I guess one can see very clear difference.
    Attachments:
    wp_ss_20130829_0004.png ‏1693 KB
    wp_ss_20130829_0005.png ‏1377 KB

    shadow118 wrote:
    I see the same thing on my 620 (yes, I know Pro Cam is not officially supported by the 620 and would not work as good as on 920 or 1020, but I found a way to get it  the interface is just so much better)
    When I take a picture with manual focus, in the screen the pic looks sharp, but when i open the gallery, it changes (wll, postprocesses) to blurry 
    just a reminder, using unsupported apps may cause serious hardware problems in short/long term. i'm sure u won't be happy when u see melting plastic parts and  some smoke on your device
    The silence will fall

  • Lumia 920 volume hangs

    Hi, i own lumia 920. My music volume hangs after certain period of time. Please someone let me know the solution apart from resetting the mobile.
    Moderator's note: We have provided a subject-related title to help other forum users easily view and respond to this post.

    So the ringer and in-call are different, but the ringer volume is connected to all other sound output? Ringer/media is the same, in other words? I'd like to be able to mute for games without turning off the ringer, but it doesn't sound like that's an option.

  • Lumia 920 battery life suddenly changed

    Hi, everyone. I am a newbie here. I had my red 920 since 11/9 and it has been great until this Tuesday. Previously the battery was great and after full charge it usually showed battery life 1day or even longer. This Tuesday I used camera a lot. The handset did get warmer because of flash and focus assist lamp. After that night the battery darin rate became really fast. After one overnight charge 100% battery only shows 9hours and drain rate was like 10% per hour. Any one has suggestions why this occured suddently? Do I need to reset the phone to factory?
    Thanks a lot
    Lee

    Hi
    I had similar issue I went to Microsoft store,they didn't understand the problem.
    they said background tasks, WiFi,location service etc. Everything was offline.
    The issue started after December patch update.
    The system keeps dropping signal very often and it tries to reconnect to 4G and LTE making battery drain, This is as per the Tech at Microsoft store...
    Use wall charger for 3-4 hours. That helps. Also let the battery drain to less than 10% and charge , Turn of all your background tasks that helps...
    No word from Nokia yet., Wireless charger doesn't work well.
    Also when i tried logging in from Lumia 920 to post this message, the popup login on the sign in doesnt work. Also when you post the scrolling doesnt work really well like on the desktop. Not sure if its the site issue or IE10 issue
    The Spell check for Lumia is still not fixed. it suggested Aluminia... can some mod from Nokia put in a request to fix this ?
    Regards
    K.R 
    KR

  • Get Page Count of PDF using Publication Post Processing Plugin

    Hi,
    I am using the publiching functionality of BOXI 3.1 to create a large volume of PDFs.  I have a report that I am publishing using a publication with a post processing plugin applied after distribution.  I need to get the total page count of the pdf and store this value in the database.  Becuase I am already using a post processing plugin after distribution, it would be ideal to extract it there...but I cannot figure out how to get the value at this point. 
    Currently we parse the actual binary pdf file, but I know that Crystal and BOXI know this total page count and some point in the processing cycle.  Does anyone know how to get at the total page count of each pdf/report instance?
    Thanks,
    Kristina

    I would post-process the PDF file as you're doing.
    The total page count isn't metadata - it's something computable from the report instance, that is lost after the PDF is generated.
    Trying to work with that would lead to a more complex workflow - i.e., schedule to report format, open the report instance using a reporting SDK, calculate the total page count, export using the reporting SDK to PDF, add the PDF to the publication artifact and remove the report instance, other steps I may have missed....
    Sincerely,
    Ted Ueda

  • No Service with Lumia 920

    Hi,
    I've bought a separate unlocked Lumia 920, and using it with T-Mobile NL. I've only been roaming in other countries (Bosnia at the moment). It used to work fine, but since the last 3 days I get 'no service', after seeing the local provider shortly connected (Everywhere in the country so far), I get a 'No Service' icon.
    The connectivity icon consists of several dimmed bars with a 'stop' sign in the middle. 
    I can manually search for network providers, but can't seem to connect to any of them.
    The software is updated to the latest version available AFAIK.
    I've tried soft resets, all possible different roaming settings (on/off/2g/3g/4g)
    Any idea what might be going on?

    Hi
    I have the same issue and we are not alone however i dont see Nokia coming with any communication about this.
    2 links that state this clearly are following from WPcentral :
    http://forums.wpcentral.com/nokia-lumia-920/232971-2.htm
    and
    http://forums.wpcentral.com/nokia-lumia-920/237951-nokia-lumia-920-still-have-no-service-issue-after...

  • Post Processing Steps after Support Package Stack Application

    I'm curious if anyone has any guidelines for post processing steps (or pre-processing) when applying Support Package Stacks to their Development Infrastructure (Developmend Workplace and the Central NWDI Server).  We have just upgraded a couple of developers local engines and developer studio to SP stack 19 from SP stack 14 and are experiencing some problems.  We also applied the J2EE stack and appropriate SCA files to the NWDI server.
    After the support packs it looks like our DTR files are gone (when reimporting configuration via Developer Studio the SC's are there but there are no DC's inside of them).  Additionally, it looks like we have to manually reimport the newest versions of SAP_BUILDT, SAP_JTECHS, and SAP-JEE.  Another thing is that old Local Web Dynpro DC's are now complaining about class path problems and different versions of files.  We followed the documentation for applying SP19 exactly as the documentation says for a Java Development Usage type.  Is there a checklist or something that anyone has for steps to perform after the application of the support packs?

    I think I'm missing something.  Now I see the code and DC's inside the DTR.  However, when I try to import into NWDS no DC's come in (the software components exist, but no DC's in them).  Additionally, the CBS web ui reports that my software components do not contain any DC's even though I see them in the DTR.  What things can I look at to determine what I'm missing here?
    Thought I'd add some more info..after applying the support packs, we imported the new SAPBUILD, SAP_JTECH, and SAP_jee SCA'S into our track as we required some functionality from the newer build SCA.  We also reimported our old archives back into the system by manually checking them in assuming this would fix the problem with us not seeing the source in the NWDS or the DTR.  After the import, the CBS no longer sees our custom DC's, but the DTR does (both in active and inactive ws).  When importing the dev configuration into the NWDS our custom DC's no longer appear, but SAP's standard SCA's do.
    Message was edited by:
            Eric Vota

  • Nokia Lumia 920 loads of issues after Denim update...

    Everything functions well, but after updating it to Lumia Denim + Windows Phone 8.1 Update 1 I first got some weird installing issues, then it started randomly crashing, then it worked fine again, of-course it won't back-up as usual (so no hard-resseting for me), and the live folders seem buggy for no reason at all, but for some reason whenever I attempt to create a live folder it takes me 5 minutes and it won't ''accept it''.
    Also for some reason there is no ''Hey Cortana'' or maybe this simply isn't for the Nokia Lumia 920.
    Attachments:
    wp_ss_20150226_0009.png ‏614 KB
    wp_ss_20150226_0010.png ‏611 KB
    wp_ss_20150226_0011.png ‏405 KB

    Hi, TulaTheQuang. You may try checking if there is any update on the phone system apps by going to Store >... > settings > check for updates and see if these will fix the problem. If not, try rebooting your phone by holding the volume down and power keys at the same time for 10-15 seconds, release and the phone will restart. After this operation, you may need to set the date and time on the phone. Let us know what will be the outcome. For the availability of Hey Cortana, you may refer to this link: Will I get “Hey Cortana” voice activation after Lumia Denim update?. Link is applicable regardless of your region.
    Regarding your concern about the calendar, gilesrm74. The feature is currently unsupported on the device, but you may post your concern on this link: windowsphone.uservoice.com as a feature suggestion. And for the availability of Cortana, you may check this link: Full of features: Lumia Denim Update. 

Maybe you are looking for