Lumia 920 - speakerphone calls with audio cable pl...

I'm not sure if this is a bug or by design but if I have my 920 plugged into my car audio AUX and I take a call using the speakerphone the call audio droppes to the phone.  If I take it off speakerphone the audio then comes out through my car system.  
Is there some sort of setting available or can this be fixed?  Call audio should always go to the line out if it is plugged in. 

I don't this is a design for a phone. Any phone I have ever used with Aux allows you to connect it and use the volume to adjust the sound from the phone just like a CD. CD players that where external in the past did the same thing. You connect it turn the sound up on the player then adjust the audio. The phone doesn't... The phone audio sinks to 0 when you try to turn it up it jumps 1 then back to 0. You turn the volume up in the car while a song is playing you get nothing. 
This is either a flaw with the phone or the diver for the aux sending to a car setero is not working properly. No phone make or model I have owned has ever done this. 
I have the same issue with a Griffin aux cable.. 

Similar Messages

  • Lumia 920 say caller name

    say caller name when you get call on wp8 lumia 920 and rest
    One of most missed feature from Symbian in my nokia Lumia 920 is saying caller name along with ringtone when I get call...have been using Symbian for so long I use to know who is calling me even if phone is far on table... If this feature dont need hardware plz bring it on wp8 or wp8.1 of same specially on Lumia 920 ...#nokia setting custome ringtone is not solution even my nokia 6600 had it.... Besides v cannot think of setting custome tone for 200-300 people in oye contact list
    vote for it here plz
    http://windowsphone.uservoice.com/forums/101801-feature-suggestions/suggestions/5738612-say-caller-n...

    This feature is already available...but only in some regions as mentioned HERE

  • Lumia 920: Incoming calls are missing sound

    For a couple of days all incoming calls have been missing sound. After some trial and error I found that this can be fixed by  placing the call briefly on hold and then taking it off hold. Outgoing calls have sound normally. This would indicate that some setting for incoming calls has not been properly reset. How can this issue be fixed? The phone has been restarted several times.
    My phone is Lumia 920 with the latest Portico update installed (the problems actually started before the update and continued after it).

    Have you tried a factory reset? OR even changing your sim card..
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Lumia 920 - no calls indications when I am talking...

    My problem is as follow.
    When I am talking with one person on the phone and another one is trying to call me at the same time I have no information about that.
    Even when I finished talking I have no SMS information that someone was trying to call me. Nothing is on the calls history also.
    Did anyone experienced similar issue and know how to help me?
    Mobile details:
    Nokia Lumia 920
    OS Version: 8.0.10328.78
    Best regards,
    Pawel

    Hi Farby,
    Thanks for a try, but it is not exactly my worries.
    I have no problem with caller names or unknown number issues.
    The only problem is tha if I am on a call and another person is calling me at the same time - it is not noticed or logged.
    So I am no able to call back, because I do not know that someone was calling me.
    Can you imagine explaining myself to my wife every time...
    Best,
    Pawel

  • Won't power on with audio cable plugged in

    I have a powerbook g4 17" 1.5ghz that I replaced the screen on. When I got the powerbook, the screen was cracked and had no audio cable connected from the sound board to the logic board so I took a cable from a 1ghz 17" and plugged it in. When the cable is plugged in, the laptop will not try to power on. All I get is a very brief sound from the cd drive. If I unplug the cable, it boots normally and works perfectly. I even unplugged the cable from the sound board with the same result. I'm thinking the cable itself has a short in it and I need to buy another one. I just wanted to confirm that this is probably the problem.

    Mac1313:
    I guess I will just have to leave the sound board unplugged and use a usb sound device for headphones or external speakers. I really appreciate your help though.
    If everything else will work, that sounds like a workable plan. You can use a device like Griffin iMic as a sound input and/or output.
    cornelius
    PS: Thanks for leaving feedback in Apple Discussions by marking "helpful" and "solved" posts.

  • Startup Chimes with audio cable connected?

    My Mini has started to sound it's healthy startup chime even when there is an audio cable connected to the audio/headphone output. The output works fine and sends audio to the speakers, but how can I mute the chime at startup?
    Previously it always muted that sound with a cable connected and I believe it started chiming when I updated to 10.5.4.
    TIA.

    The mini generates the startup chime via the internal speakers regardless of whether external speakers are connected or not - the necessary support for the hardware audio port isn't loaded until after the power-on self test (which is what generates the chime) so in common with the iMac range, the chime comes from the internal speakers.
    The only way to mute the chime at startup is to set the Sound preference pane to Mute (check the 'Mute' box in the Sound Effects tab). There are also some utilities such as Startup Sound (http://www5e.biglobe.ne.jp/~arcana/index.en.html) which variously succeed in muting the chime, though these tend to get broken with MacOS updates.

  • Sound to tv with audio cable

    I have a 2009 Macbook 13 inch that I have gotten to connect to my Vizio TV through an HDMI cable for the picture. The guy at best buy told me I would need an audio cable from my macs headphone jack to my tv's audio spots. I hooked that up and nothing happened. Any help?

    If you have the computer plugged in through the HDMI cable port on your TV, then the TV is trying to get the audio from that cable which it can't do because the Mac doesn't push sound through the HDMI.  When you are plugging the audio cable into the TV, you are probably plugging it into the audio input on a different video mode, which is why you aren't hearing anything through the TV because you can't select HDMI for video and another mode for the audio.

  • Lumia 920 locks up with Black Update

    I'm using an unlocked Rogers (Canada) phone on T-Mobile (USA). My phone had been working fine with the Amber update but as soon as I updated to Black it started hanging and acting weird. These are the symptoms:
    1. If I have a device pin setup it hangs as soon as I type in the pin or if I hit the emergency call button.
    2. If I don't have a pin, most apps don't start. They say they are loading but after 30 seconds or so they drop back to the start menu.
    3. It never successfully reboots, I have to use the soft reset key sequence (power + volume down) to get it to restart.
    4. I see missed incoming calls but the phone gives no indication when you're actually calling it.
    Things I've tried:
    1. Soft reset.
    2. Hard reset.
    3. Flash to pre Black using Nokia Software Recovery Tool. (no longer possible since it downloaded the black update this morning)
    4. Restoring backup after hard reset.
    5. Picking all the defaults after a hard reset.
    6. Changing the region on startup after a hard reset.
    7. Changing the keyboard layouts (remove some, add a bunch). This the one setting I seem to be able to get to.
    8. Uninstalled all apps I could (I can't see what games are installed).
    Does anyone have any idea what might be causing this problem? I'm in the US and the phone is Canadian so it's going to be a pain to send it in anywhere.
    Thanks!

    that's really a bummer.
    I went through the same thing/similar when I updated my 920 to black.
    I had to hard format and use the NSRT to reinstall the firmware completely 10-12 times until it finaly took the firmware correctly.
    other than that, seems you have done everything you could to troubleshoot it.

  • Why iPhone 3G Dock doesn't work with audio cable?

    Hi, I'm Italian. I apologize for the mistakes, but I just learned English!
    I will try to explain you my problem. I bought an audio-video cable for iPhone to link it at my stereo and to get better the HiFi System, I decided to buy an iPhone 3G or 3GS dock (my iPhone is a 3G one). But, when I  linked all, the iPhone works with its speakers. Is possible to get working the iPhone like this:
    iPhone > audio/video cable > stereo
    with these links:
    iPhone > dock > audio/video cable > stereo
    Thank for your help.
    P.S. The products are all original, they're these:
    http://www.memorypuntoit.com/public/prodotti/982010171817a.jpg

    Have you downloaded the Remote App? Wouldn't it be better for your iPhone's battery life to just let iTunes play the music over AirTunes? I'm kind of confused as to what you're trying to do.

  • Nokia Lumia 630 phone connection with USB cable an...

    Kindly be advised that I have been able to easily connect my Nokia E6 in the past to my Lenovo Thinkpad T530 running Windows 7 (64 bit) via Nokia Suite and Windows Explorer by both Bluetooth and the USB cable and was able to see the D and E drives (e.g. mass storage and phone memory) of such Nokia phones. 
    Since I connected my new Nokia Lumia 630 to the same notebook computer, the bluetooth phone appear under Bluetooth devices and music and sound can be relayed between the computer and the phone, however, no files structures are being displayed under such phone connection in Windows Explorer during a Bluetooth connection.  During a USB Cable connection at least the documents and photos folders appear in Windows Explorer but nothing else on the D or E drives are displayed.    
    Even the Zune (the Nokia PC Suite replacement) does not want to even connect with the phone device from the notebook!
    Kindly advise why I am unable to access the Nokia Lumia 630's full mass store and phone memory via BlueTooth or USB Cable from my Lenovo Thinkpad T530 running Windows 7 (64 bit) ?

    Jonkie wrote:
    Zune […] does not want to even connect with the phone device […]
    Zune was targeted towards Windows Phone 7. It got replaced by the Windows Phone app for desktop – which does not give any more feature than you have already.
    Jonkie wrote:
    no files structures are being displayed under such phone connection in Windows Explorer during a Bluetooth connection.
    Windows Phone 8.1 does not support the Bluetooth profile OBEX File Transfer (FTP) as Symbian did, yet. Because this is a feature request, there you go …
    Jonkie wrote:
    D or E drives are [not] displayed.
    What files are missing, what do you expect exactly? Then, I look-up the corresponding feature request.

  • Lumina 920 - making calls with the headphone jack

    maybe this is the typical nokia phone operation, but it seems like the heaphone jack should work with a microphone headset for making calls. I've tried three different wired sets with no luck.
    havig switched from an iPhone, this is a little dissapointing. Unless it's a faulty device?

    Hi there,
    unfortunately you may have a faulty device. From what i have heard, all mic headsets should be able to work, even if button support is not optimised (i.e. the microphone bit should work, and the other caller hear you). If it doesn't work, then you can try performing a reset of the phone by going into Settings > About > Reset your phone, or a soft reset (by pressing the volume down and power buttons together for five seconds). You won't lose any data, but always pays to perform periodic backups anyway.
    Failing that, try performing a hard reset as detailed here: http://mynokiablog.com/2011/11/08/how-to-hard-reset-nokia-wps-three-finger-restart/ and if that STILL isn't working, then you will need to take your phone to your local Nokia Care point for them to inspect.
    to locate your nearest Nokia Care point: http://nokia.com/support

  • Nokia lumia 920 - video call

    Hello,
    Does WP8 has ability to make video call via 3G ?? Without using any 3rd party application

    No you need to install skype.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • I have a windows Nokia Lumia 920 mobile phone but cannot sync with my Mac

    I cannot sync my Nokia Lumia 920 mobile phone with my Mac desktop system 10.9?

    Have a look on the right of this page under 'More like this'.

  • Will lumia 920 work with any NFC Speakers?

    will lumia 920 work with any NFC Speakers? If not how can I tell which nfc speakers work with my phone before I buy?

    Hello, Cwall.
    Thank you for posting and welcome to the Nokia Support Discussions.
    Yes. The Lumia 920 will work with an NFC speaker. Please see this to see compatible NFC speakers for your phone: http://www.nokia.com/global/products/accessories/?​action=accessorysearch&product=1805904.
    Let us know if you need further assistance. Cheers!

  • Disable Driver Enforcement for Virtual Audio Cable?

    Hi, I'm trying to get this thing called "Virtual Audio Cable" Working, but It is apparently not signed, so I cant even use it. Is there a fix to this? I've tried to use bcdedit -set. I have tried to use DSEO Too, but I dont know what file it wants
    me to sign, so I'm confused. So if anyone has any idea what to do with this, it will be very helpful.
    (PS, Not really the best with computers. But if you guide me through what you want me to do. It'll be easy.)

    Hi,
    Do you mean that you're unable to install the unsigned driver for Virtual Audio Cable? If so, you can choose “Disable Driver Signature Enforcement” during boot, this allows unsigned drivers to load for this boot only.
    You can refer to workarounds mentioned in blog below
    How to install unsigned drivers
    http://blogs.msdn.com/b/matthew_van_eerde/archive/2014/04/05/10211068.aspx
    And there's a security policy to configure the Unsigned driver installation behavior in previous Windows versions, but removed since Vista
    Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options\Devices: Unsigned driver installation behavior
    while you can refer to this KB to re-add this policy option, this KB is for Windows Vista, but I have tested in my Windows 7 enterprise, it also works.
    http://support2.microsoft.com/?kbid=947250
    Add: as Rick mentioned, Eugene Muzychenko should be more familiar with this product
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for

  • How to view the SOAP message in a web service call + Urgent

    Hi All, Iam trying to test a web service call(Iam using CXF). But I need to view SOAP message sent to web service or need to debug the web service call. Please help me on this regard with example.

  • Cursor disappears in PS CS5 after OS10.8 upgrade

    Hello, I have a problem in Photoshop CS5 (v. 12.0.2) after ugrading my Mac system to Mountain Lion 10.8.1. I use a mouse (not wireless, also tried changing mouse). When I work with a picture using the brush tool and move the cursor to a palette or me

  • No Icon For I Cloud

    Instead of the expected I Cloud icon I have the MobileMe icon in settings.  When I use my Apple ID login to try and activate I cloud, Mobile Me fails to recognise it.  I have an i cloud account via my i phone but it is no use if I cannot transfer pho

  • Create images with dynamic width from 3 images each (left/center/right-part)

    Hello, i want to employ a script to create images of dynamic width for me. The whole process shall base on different sized sets of images, which contain a left-image, a right-image and a center-image. The desired width for the different cases shall b

  • Authorization within a report

    I have a report, and that transaction is assigned to different roles, which are assigned to different users. How do I limit which company code can be view per user? I am not sure how the authorization objects work when it comes to reporting. In PFCG