Lumia 925 apps not updated Error:80060010

My wife's Lumia 925 does not update apps. In the store tile it shows number of pending apps, but when opening the store, I only can see adds of various apps. Sometimes get Error code 80060010. What's wrong?
I do not have similar problems with my own 1020.

Good day. Visit this link: I cannot download or update apps from Store and see if the workarounds will do the trick. The link may be intended for the US, but the content is applicable wherever your location is. Keep us posted. ;-)

Similar Messages

HT201413 my iPad will not update error 9 keeps coming up

My Ipad will not update, error 9

Hello Nicky Mifsud,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#9
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Have a nice day,
Mario

Ipad mini apps not updating after ios8.2 update

apps not updating after software update ios8.2 on ipaD MINI WITH RETINA SCREEN

Turn off any auto-update, if it is on, then tap any of the "circle icons" showing that a download is in progress, in order to stop the download. Then go to the Settings and reset the Network Settings. After the iPad starts back up, then check to make sure no apps are currently in progress of downloading. If any are, stop them again, and reset the network settings again. When it starts up again, none should be in the process of downloading. Then from that point forward, only download manually and never more than two at a time. If it is more than 100 MB, then do only one at a time. If any gets stuck at that point, then stop the download and reset the Network settings.
That should take care of you for now. We'll see what another update brings ... IOS 8.2 (which might be the next one).

My iLife v9.03 Install disk is corrupt. Where can I find a download for the the app (not update) at apple support online ?

My iLife v9.03 Install disk is corrupt. Where can I find a download for the the app (not update) at apple support online ?

I have an iLife 11 disc that doesn't work very well so I tried creating a disk image of it with Disk Utility. It took two tries but finally got a disk image that I could use to install the iLife 11 applications. Give it a try.
OT

Youtube app not working "error tap to retry" on ipad 4. Tried holding home button and off together and delete and download agin both didn't work

Youtube app not working "error tap to retry" on ipad 4. Tried holding home button and off together and delete and download agin both didn't work

Oh phooey. I had the same problem, so I decided to delete and reinstall. Only to discover that Google's YouTube app no longer supports anything below iOS 6. This is a problem since I'm running an original iPad.
Yes, I realize that my version of iOS still has the old YouTube app. But it's not the same. For one thing there are a lot of ad-supported videos that will only play in the new app.

PS 6 is not updating: error message U44M1P7 Also have CC installed.

When I click on "more details" my finder opens like I'm supposed to choose a file and it's all gibberish to me.
Anyone encounter this and have a solution?

PS 6 is not updating: error message U44M1P7 Also have CC installed.
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Has anyone else had trouble with apps not updating when you update through the app store?

I'm having trouble with GSN Games app not updating, even though the app store says that it's the most updated version. Has anyone else experienced this? My mother's app updated just fine with all the new features and games within the app, but mine didn't update the same. We both have ipad2 running on ios 7.0.06. I can't figure this out. New games were added to the app that I'd like to play, but can't because of this.
Any suggestions before I contact the app developer?
Thanks so much for you help.

I frequently get my connection is to slow for play.
Tap Settings / General / Reset / Reset Network Settings.
Restart your iPhone.
Try again.

Why do Apps not update after installing iOS6? They just hang there!

WHy do apps not update after installing iOS6?

Each time? every day? Just plain crazy! Updates happen automatically on your mac....why not the same thing on ipad/iphone?
If the app was purchased on my phone with my account, surely they do not need to "verify" my credentials each time. If my phone was stolen and someone purchased a $20 app surely my $300 phone is more important?
They need to come up with e better solution...when we all have hundred or thousands of apps on our devices what then?

Apps not updating. Stuck on "Waiting"

I saw that large thread that was started months ago about apps not updating, getting hung up on "Waiting" then saying "App X could not be updated at this time. Done? Retry?" and no matter what you select, you cannot update or even use that app.
Has this still not been fixed? People were posting about this issue 5+ months ago. Do I really need to download some 3rd party software like iExplore to fix this?
I tried all the basic things listed in that thread, but I cannot believe Apple hasn't addressed this. Is there some new quick fix I'm missing?

Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Also, make sure you don't have any paused downloads in other apps either, like the iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.

Apps not updating during sync

apps not updating during sync

It sounds like your iPad is sleeping or you lose your connection before the process completes. Try plugging the iPad in to a power out and do the update. Make sure you have a strong wifi signal.

Apple Configurator VPP "app not authorized" error

Hi, I’m new to using Apple Configurator and VPP licensing for setting up iPads for our business. In a nut shell I had several free apps and a couple VPP apps imported and deployed to several iPads with no problems. Everything seemed to be working great until I went to import some additional apps from my iTunes folder and accidently re-imported the entire folder. Once the entire folder was import “overriding all the existing apps and VPP apps” I could no longer re-deploy any of the VPP apps to the iPads –I am getting an “app not authorized” error for only the VPP apps. I then tried to remove and re-import all the apps, re-import the VPP licenses, check-in and check-out the iPads, deleted and re-downloaded apps under iTunes, etc. (just about every troubleshooting combination) with no luck.
Any ideas would be appreciated! Thanks in advance!

The database in which Apple Configurator records the use of redemption codes is your only record of the valid use of those codes. Be sure to maintain a backup of the Mac on which you use Apple Configurator.
If you lose the Apple Configurator database, your users will retain rights to use the apps already installed on devices, and you can reimport any spreadsheets to install additional apps on devices using unredeemed codes. But if an app is deleted from a device after you lose the database, Apple Configurator will be unable to determine the device’s rights to that app, and you will need to redeem another code in order to reinstall the app.
http://support.apple.com/kb/HT5188

Nokia Lumia 925 with Black update - When low light...

The ambient light sensor doesn't seem to be correctly used in low light conditions.
In low light, with the phone "locked", just push the middle unlock button. The screen show the usual unlock screen, but at high brightness, for what seems to be a variable time (every time I do this), but not longer than 100-200 ms. Then the ambient light sensor starts to work, and reduces the display brightness.
This has only started since the black update. My Lumia 925 was working fine before, and now this display brightness problem has started. It only happens in low light conditions. If there is enough light (eg. daylight), the screen doesn't start with max brightness to begin with.
It doesn't matter if I'm using "glance" either. With this feature turned on or off, in low light conditions, this problem is the same.
I am now not using glance (I wasn't really using it before the update anyway), and I've set my screen brightness to a set value as a workaround.
OS version 8.0.10517.150
Frimware: 3051.40000.1345.1001
Hardware: 0.5.6.1
Radio: 3.2.04047.1
SOC: 8960
Solved!
Go to Solution.

So I've played with my phone more ... and I don't think there is a big problem. If I move to a room that is darker, and wait a few seconds, the phone unlock screen isn't bright when I hit the unlock button. It seems the phone now needs longer time to get used to the light conditions it is in.
Maybe the Lumia was always like this, or maybe the ambient light sensor has a slower response time now, and isn't polled as often for its reading, like it was before. More likely is that as I have been playing with the glance screen, I've been locking and unlocking quickly, while walking around. The phone hasn't had enough time to update the ambient light settings.
Interestingly, with the glance set to interval, I can still wake up the interval screen when placing my hands on the screen. I had left my phone for sometime on its own, then I lifted it up. Either my fingers or the movement triggered the glance screen to turn on. Or its has a timer as such, and just happened to turn on at this point in time ! Who knows (well I'll search for more info about the new glance settings now).
So it looks like there is no problem. Either its always been like this, and I'm testing the ambient sensor polling to the limits by pressing the unlock button often. Or the polling rate has been reduced (maybe to help increase battery life).

Apps not updating since OS x yosemite

I have iMac mid2011 model, and upgraded to Yosemite from Mavericks about a month ago. Since doing this, I am having trouble updating most of my apps when updates come along. Particularly iPhoto and iMovie (plus other apps). I have tried to do as is suggested - to go through 'purchases' on the App Store, but I just get a message of "an error has occurred" and nothing else...I have tried to shut everything down and restart the computer, but has made no difference. I am currently running version 10.10.2, which is the latest version.
I went to go to OS X support, but they want to charge me for it.....so any solutions anyone may have, I would eagerly appreciate it. Thanks.

If you have got an external drive, you can try copying iPhoto and iMovie there, remove the external drive and try installing iMovie and iPhoto as new apps instead of updating them.
In the picture I see that iPhoto is not being updated. You can also try restarting again and trying to update only iPhoto

Apple software not updating - Error message

iMac locked up (white screen of death) so restarted.
When it restarted it will no longer update apple applications through the App Store. Downloads and then starts to instal and comes up with an error message.   (iTunes, iMovie so far)
Non Apple programs still seem to update and/or instal.
Applications still run but not update to new versions.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
          /var/log ▹ install.log
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. Don't post more than is requested.
☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
☞ Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

PreludeCC and PRemiere Pro CC will not update error: " log Transport 2"

PreludeCC and PRemiere Pro CC will not update . update gets to 62% and then quits with the following error code "Log Transport 2"
System
OS 10.9
MacPro 3,1
All other apps do update.

HI Steve & Perry,
Have you tried restarting the machine and applying the updates again ? If yes, are you still getting the same error message ? If yes , could you please share a screen shot of the error that you get ?
Cheers,
Kartikay Sharma

Lumia 925 apps not updated Error:80060010

Similar Messages

Maybe you are looking for