Lumia 925 ATT Here Drive+ issue after Cyan

I've noticed that on my 925 Here Drive+ doesn't recognize addresses that it previously did. It can find the address just fine from Here Maps, and will give turn by turn directions when you start navigation from there, but not when you use the people hub to quickly navigate to an address from a contact. Pops up a dialog that says no address was found.
I've done a soft reset etc, did a full erase and update, not from a backup, everything from scratch.
I would appreciate any advice you might have, one if my most used features.

Same problem here.
Had the Lumia 925 for nearly a year - without any problems ever.
Since the Cyan update the phone often freezes, which it never did before. The only way to bring it back to life is the Power+VolumeDown button combination.
On the first few freezing occasions the glance screen was showing and stuck, and it was charging via USB.
I have reset the phone (from Settings -> Phone), and turned the glance screen to "Peek", which appears to have reduced the occurrences of freezing, but it still happens.
From my observation freezing is more likely during charging, but that may have been a coincidence. It has also occurred while not charging.
3G, Data connection, and location were on in all cases of freezing, WiFi and NFC were off in all cases.
This is a _very_ serious bug that should get lots of attention immediately! The threads about it fill in several locations, at wpcentral, MSDN, etc. (it apparently affects several Lumia models).
Are there experiences with using the Nokia Software Recovery Tool? It will apparently reset the Lumia 925 to a pre Cyan state. If I then install the updates, including Cyan, again, will there be a chance of the freezing problem to be gone? Or should I refrain from installing the Cyan update again for the time being if I want the phone to be reliable?

Similar Messages

  • Lumia 1520 issue after cyan update

    After cyan update the screen start vibrating automatically and open Bing search and some random apps. I don't have any control of that.
    Then navigation bottom stop working. Sometimes I need to restart it or lock/unlock screen to make it work. This is very annoying. I never had this issue with wp8.

    Try making changes in Display settings and see if that is of any help: 1. Display - Sunlight Readability off 2.Touch - Sensitivity Normal
    Click on "Accept as solution" if it worked for you else if it was helpful you can click on "Kudos star" below.

  • Hard drive issues after update 10.10.3

    Question also posted here:Hard Drive Issues (Both new and old)
    I'm trapped in a HDD nightmare with my MacBook Pro mid-2012.
    I updated to Yosemite 10.10.3 (with the Photos app). A couple of days after the update, I was watching a movie on my TV screen via HDMI. In the middle of the movie I removed the HDMI cable from the MacBook Pro and everything freezes. I forced shut down (Note: My HDD was encrypted). After I forced shut down, I tried to turn on and the loading screen would never stop loading - like, 14 hours stuck with the progress bar. Since I have backups, I decided to access DU and format my HDD. I tried everything. For real. Every command line I could type on Terminal to format, repair, erase and/or partition. I read almost every issue-related questions on the forums and stack exchange groups for a week (even posted my issue here: http://apple.stackexchange.com/questions/181090/erasing-and-partitioning-hard-dr ive-from-internet-recovery?noredirect=1#comment215695_181090).
    So, I decided that it was a HDD failure and bought a new one.
    I bought the Seagate 1TB SSHD Hybrid  - ST1000LM014. Installed the new fresh disk and guess what? All those same problems again. I´m not able to restore from Time Machine because it doesn't recognize the disk in the restore page. But the disk is recognized in the DU. When I try to erase or partition the new SSHD, the same old errors: File system formatter failed. Yes, I tired GUID Partition Table, all of the security options, etc.
    Please. Any light that you can throw at this issue, I'll be very grateful for. BTW, the new SSHD is recognized and the SMART Status says: Verified.
    Any ideas on *** is going on?
    Thanks in advance!
    MacBook Pro (13-inch Mid 2012), i7, 8GB RAM

    After I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
    One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
    Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
    I've been running 10.5.8 for awhile with no issues, and would recommend moving to it.

  • Here Drive + license after hard reset ?

    I have a nokia lumia 520 and bought a license here drive + after resetting my phone appears not licensed

    Hi @kmisike ,
    The Drive+ purchase is tied to your Microsoft account, just as any other app:
    http://here.com/help/search/purchase/wp8:drive/#howcanigetheredrivebackifihave
    Note that if your phone had initially HERE Drive version and you have purchased an upgrade to HERE Drive+, you don't need to purchase the app again. All of your Windows Phone app purchases are tied to your Microsoft account. You can download and re-install any app you've purchased by logging in to the Windows Phone Store.

  • Driver issue after Downgradin​g to Windows 7 (Pavilion 17-f081no)

    So,i went to downgrade yesterday,and have had this problem ever since. Nothing works except one USB port at the right side of the laptop (when looked at front),no usb connections,no wireless or wired connection,nothing. They are all dead,including SD card slot.
    I know its the driver issue,but i cant seem to find them. I need something for USB ports,Ethernet/Network card/,SM BUS controller etc. They are all listed under "Other devices" in Device manager.
    What drivers should i be getting? I have been trying to google,but i am starting to feel really hopeless here.
    My wireless card info:
    PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C&REV_00
    PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C
    PCI\VEN_10EC&DEV_B723&CC_028000
    PCI\VEN_10EC&DEV_B723&CC_0280

    Hi:
    First install the amd chipset drivers and reboot.
    http://support.amd.com/en-us/download/chipset?os=W​indows%207%20-%2064
    See if the generic amd graphics driver works...
    http://support.amd.com/en-us/download/mobile?os=Wi​ndows%207%20-%2064
    Ethernet:  DL and install the second driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy​...
    Wireless:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​wItemId=ob_143747_1
    Bluetooth:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​wItemId=ob_142906_1
    Card reader:  DL and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT​...

  • New Lumia 920 with Here Drive+Beta - no connection...

    Hi!
    I have two Lumias - 800 for my private use and brand new 920 for my business use. 800 has WP7.8 installed and Nokia Drive works flawlessly and I can download any maps I want.
    But not so with 920 with WP8 and Here Drive+ Beta: phone informs all the time that there is no connection with map server - check your WiFi connection. But WiFi is working Ok with full speed - I have web pages like this opened  without problems (data connection disabled for to be sure WiFi is functional).
    Same message appears when I'm trying to download maps through Here Maps. My country, Finland, is of course in the list and as I said before, Nokia Drive works with Lumia 800 and maps can be downloaded.
    What could be the problem? Location, GPS works, WiFi works. Nokia account active, WindowsLiveId active. Are map servers for Here Drive+Beta really out of operation right now?
    Solved!
    Go to Solution.

    OK, everything is working now. Just waited 8 hrs and servers are up again. Problem solved. Odd although that my Lumia 800 was working at the same time.

  • CD Driver Issues after installing 11.1.4

    After installing Itunes 11.1.4, my HP computer, running Windows 7, could no longer find the CD drive.  Upon investigation, someone suggested I update my registry to remove some entries.  I did the following:
    Start, enter regedit in search bar,
    Open regedit
    Left hand menus click HKEY_LOCAL_MACHINE
    SYSTEM
    CURRENT CONTROL SET
    CONTROL
    CLASS
    Then need to find  {4D36E965-E325........... (are more figures but not needed)
    on right hand window see if there is an upper filter or lower filter.....right click and delete the values if either are there.
    RESTART...
    This worked, but now Itunes complains every time I open it, saying some registry settings are missing for my CD drivers.  I've used Itunes on this computer succssessfully for years, until this upgrade.  Apple, whatever you did, please undo it.  Horrible release...

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • HP Envy dvd drive issues after the Windows 8.1 update

    I have a HP Envy and after the Windows 8.1 update the dvd drive is not working. I can see the drve but it is difficult to get the drive to open or recognise there is a disc in it. What can I do?

    Hello @Jenino,
    I understand that you are having issues with the Optical Drive on your HP ENVY 7 PC. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • MAC Driver issues after Windows 7 update

    Hi,
    I recently installed a slew of updates for my Windows 7 partition on my iMac. After updating and letting Windows restart my machine, the keyboard and track pad would not work. They show as connected in Control Panel, but when attempting to type or scroll I get nothing. I'm not sure where to turn and was looknig for some help here.
    So far I've tried using BootCamp to update the drivers using BootCamp assistant and my USB stick. Using a USB mouse I was able to repair the 'Apple Software' Drivers. This did not work. I tried removing the USB 3.0 driver - No dice. I've tried rebooting into Safe Mode to see if there was any unrecognizable hardware - no dice. Not sure what else to do.
    I do not want to reinstall Windows 7 since none of my data is backed up. I'm positive this has something to do with the update since everything was working prior. I just don't know what was changed that would affect the keyboard and mouse. The last updates were from 9/09, so the updates included everything from then until today. I want to avoid a system restore as well to not remove any security updates.
    Also - when I press the power button behind my iMac, it immediately forces a shutdown. Normally a single press would put the display to sleep.
    Any one else encountering this problem?
    Thanks!

    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the extensions.* files (e.g. extensions.json, extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end of the Search bar to check if there is a compatibility update available.
    If this hasn't helped then also delete possible addons.json and addons.sqlite files.

  • Bluetooth Mouse Driver Issues after updating to SP1

    Greetings!
    After upgrading to SP1 my bluetooth mouse stopped working.  The dongle I'm using is being detected fine, and when I scan for the mouse I can find it, but when I try to connect to it I get a "Locate driver" message from Vista.  When I let it scan for the driver it is unable to find anything compatible, so when I tell it to scan the CD that came with it again it finds nothing.  It's like the Bluetooth HID Device driver is no longer working.
    This is the dongle:
    http://us.kensington.com/html/9403.html
    This is the mouse:
    http://us.kensington.com/html/12635.html
    Some of the things I've tried:
    Uninstalling and reinstalling the WIDCOMM Bluetooth stack.  I've tried using Vista's Bluetooth stack instead of the WIDCOMM stack, with no luck.
    I've also tried the Bluesoleil drivers with no luck there either, in fact those seem to break the dongle and Vista is no longer able to detect it.
    I've tried the install CD that came with the mouse, but it seems that is for Windows XP only.
    I've tried another Bluetooth mouse that produces the exact same results, with a CD that is for Vista.
    Anyone else having this issue?

    Just wanted to update this with an answer.
    I'm pretty sure that running vsp1cln.exe was the reason why my Bluetooth and iPod stopped working.  I reinstalled Vista and upgraded to SP1 without running that tool to clean up the install files and both bluetooth and my iPod are working again.  It must clean up the driver files that they were using and the new files are not compatible or something.  Not sure really.

  • Lumia 1020; app update error 80073cf6 after cyan ...

    I updated my Lumia 1020 to the Nokia Cyan firmware today. Most of the app updates went fine but now some updates from the store are stuck with the error code 80073cf6.
    I tried restarting the phone but that does not help. Any ideas?

    The "error code 80073cf6" in Windows 8 on PC's suggest trouble in the store cache on the device, and there are procedures to reset and clear this on a PC - but this is only possible on Windows Phone by performing a factory reset.
    I hesitate to advice a factory reset of the phone since it is a lot of work, and may not solve the problem! Also, since this is trouble between the Store and the phone, it may be solved in an update of the phone or the store later.
    I would sit tight for a while (days or weeks ...) unless the apps are important here and now, and keep an eye on new updates to the phone, and retry the download once in a while, but it's your decision whether to try a factory reset.
    Microsoft have information of devices failing to download apps from the store, and if your specific trouble affect enough people, changes are likely to be made (days or weeks ...)

  • Google Drive Issue After OS X 10.9.3 Installation

    Hello,
    Since last week when I install the latest Mavericks version, i.e., the OS X 10.9.3, my Google Drive folders isn't working anymore as should be.
    The status icon in the folder and in the files disapear!
    I uninstall the Google Drive and installed again and everything come back (working again) until the next reboot.
    Then the status icon disapear again!
    Any tips about this issue?
    Thanks.
    Regard,
    Before:
    After:

    I founded that this is a Google Drive known issue on Mac:
    https://support.google.com/drive/known-issues/2458941?hl=en&ref_topic=14951
    Sync status icons missing on Mac
    After you install Google Drive for your Mac, you should see sync status icons next to file names in the Google Drive folder on your computer. If you don’t see these icons, try restarting the application.
    Open the Google Drive menu from the toolbar at the top of your screen.
    Select "Quit."
    Restart Google Drive by opening it from your Applications folder.
    Enter your Mac username and password (not your Google Account information).
    The sync status icons should now appear in your Google Drive folder.

  • Lenovo driver issues after upgrade to Windows 10

    Hi, i recently upgraded my Y50 to windows 10 after i got the notification. Now the Fn+F6 to disable the trackpad and Fn+F5 for airplane mode don't work. others seem to be working properly. I was unable to find any rivers. Also, i noticed that league of legends now runs at 60fps when uncapped, while previously it ran at about 180. I am not sure if the nvidia graphics card is being detected or if it is using the intel one.

    the problem has been fixed by  1- reinstalled win 10  2- win 10 removed intel hd 5500 driver as expected  , but i didnt update it manually nor by update from device manager nor make any changes ,  so i ran windows 10 update tool from system and made all 100% update after restart things are ok  now every thing is ok and new intel hd 5500 driver has been installed  by win 10 update tool : 10.18.15.4248 //driver date : 29/06/2015 also invidia 840m driver has been updated thanx for any try to help and if any one still stuck with black screen the problem is that win 10 read two monitors instead of 1 so you have to click "windows button + P while black screen already on  " and try to hit and click on first choise or other choises till you can see the desktop , sure u cant see any thing while u are trying to choose but you should try or may be you connect another monitor or tv and fix this issue by win button + P good luck  

  • CR52 (MS-8352M) 52x32x52x CD-RW Drive - Issue after trying to update the Firmwar

    I have the CR52 (MS-8352M) 52x32x52x CD-RW Drive and I'm running Windows XP.
    I noticed that I was having issues with CDRW's and my drive was reading data very slow, but I had no issues burning CD-R's.
    After finding that the current firmware was 1.70, I decided to update the firmware to 3.70.
    Halfway through the firmware it gave me an IDE Error (forgot the actual code, but it just bascially said it could not rerad a present drive).
    Now when I boot up, there are no lights coming from the CD drive.
    is this drive now dead because of an improper firmware update?

    I guess that you have a bad flash of the firmware. I suggest that you flash in Safe Mode and best with only that particular drive that you want to flash to be connected to the controller.

  • Lumia 1520 32GB - One Drive Issue

    Just got this phone as a replacement for my 920 and, for some reason, media stored on OneDrive (formerly SkyDrive) will not play (Error Messge: We cannot play this file on your phone) until I log out of OneDrive and log back in. It will work after logging back in for a period of time and then will stop, requiring me to do the log off/ log on process again. I have reset the phone with no improvement in this issue. Never had a problem on my old 920.
    Is anyone else experiencing this? If so, any workarounds?

    Hi CrazyB24,
    Welcome to the forum! 
    Do you only get the error with a particular media file, or with all playable files saved on OneDrive? Are you using a downloaded OneDrive app, or the one integrated with the phone's software? When you say reset, are you referring to the one under Settings > About? Do you have a stable WiFi or mobile data connection when playing the media files? Playing Onedrive files require a good internet connection.
    If you're using a downloaded app, try removing and reinstalling the app from the Store. If it's happening with a particular file only, try to remove and re-upload that file to Onedrive. Download it first to a PC to back up the original file.
    Make sure that the phone's software and system apps are updated as well. Check it under Settings > Phone update. Try scanning the app codes shown at this link: Nokia Windows Phone 8 App Updates.
    Let us know if this information has helped resolved the issue. 

Maybe you are looking for