Lumia 930 restarts after failed video upload to FB

I'm on vacation and the net is slow here 1,5 Mbit/94 Kbit ADSL. My phone fails to upload to Facebook hrough the share menu of the video viewer of Nokia Camera. Worse than that, after the FB app signals back that it failed to upload, the phone restarts.
Any solution? It is slow connection but otherwise reliable. Transferring the video to the PC, and then upload through the FB website slow but flawlessly works.

Hello. Welcome to Nokia Support Discussions. Have you tried rebooting your phone by pressing and holding the power+volume down keys simultaneously for 10-15 seconds and it will reboot automatically? You may also try connecting to a Wi-Fi connection.
Keep us posted.

Similar Messages

Cannot restart after failed Leopard install

Attempted to install Leopard on iBook with appropriate processor speed. Installation fails. Reran installer and let DVD be checked. States problem with DVD. When I try to restart the computer, it will not restart. Spinning wheel just keeps spinning. I cannot get the DVD to eject.
I have already had to pay to have 24" iMac fixed after failed Leopard install, 2-3 hours trying to get through to Apple, and prior to posted comments on installation problems on the web site.
So far lousy product and very lousy service/support.

To eject the disc - http://docs.info.apple.com/article.html?artnum=50991
Once you eject the disc, gently clean it before reinserting it. Some dvd drives are very fussy about the media.

Ongoing Failed Video Upload

Hi Everyone (:
So I was trying to upload a few videos onto facebook. Two of the videos have been trying to upload now for hours and aren't uploading so I just want to delete and cancel the upload. I have tried force closing and clearing the data on the facebook app and I have turned on and off the phone and restarted it a few times. I can't think of anything else to do?

Hello kaitlynswing,
I was reading your post and I couldn't help but to chime in and assist with your video messaging issue. May I ask are you able to send & receive video messages to other mobile phones? Also, how long are the videos your are trying to upload and what resolution are the videos recorded in? I'm assuming that these are videos that you have taken using your device and are not copywritten, correct? If so then what make and model device do you have?
There are several ways to upload a video to Facebook from your cellular device. One of the most popular ways to upload videos to Facebook is by using a Video Uploader. Here's a link so you can get a better understanding on how it works.
https://market.android.com/details?id=net.eworldui.videouploader&hl=en
In addition to trying this app, I would recommend that you unsintall the Facebook app, reboot the device, and re-download the app onto the device. Once you have done so, retry to upload a video. If the results are the same then please post your findings so I can further assist,
Thank you...

Lumia 925 restarts after taking a picture with Nok...

Hey guys,
so here is my problem: after I updated to the Lumia Black Update, the phone restarts every time take a picture using the smart camera. I checked that every app is up to date, any ideas what can I do?

How are you trying to send the photo?
iMessage?
In an email?
Via AirDrop?
or some other method?

Pavilion dv6 6169sl does not restart after installing video driver

Hi, I reinstalled windows 7 (64 bit) on my Pavilion dv6 6169sl.Then, I downloaded the video driver from the hp website and, when I restart the pc in order to complete the installation, it doesn't start, but the system stops showing the windows logo.Can you suggest me a possible solution to this problem? Thanks a lot.

, Hello and thanks for posting on the HP support site. The first thing you will want to do is boot into safe mode. Here is a link to help you with this. HP Notebook PCs - Entering Safe Mode (Windows 7) While in safe mode you will want to do a system restore back to before you tried updating the driver. HP PCs - Performing an HP system restore (Windows 7) Please let me know how this goes. Thanks again for posting and have a great day.

Macbook pro will not restart after failed disk repair

This has happened twice in one week.
A routine disk verify was performed and returned errors. I reboot into the recovery drive and run disk utility. To validate the first finding, I run disk verify again. Same failure. Then I run repair disk. Disk repair fails. After this, the system will not boot. Now, even the disk utility 'sees' the main particitian, but it's grayed out. when i go to retore Lion, the main partition is not seen at all.
The kicker is that two different hard drives are involved. The first is a 500 gb Western Digital and the second is a 750 gb seagate. System is a mid-2009 MBP with 8gb ram.
I performed a full system backup this weekend but do not have it with me and will not have access to it until this weekend. Any help out there? Or am I just screwed?

Oh by the way, a mid-2009 MacBook Pro would not have 10.4.6. In fact it might not even have 10.6.4. 10.6.4 didn't get prebundled until June 15, 2010. So where you get 10.4.6 on your signature, that confused people as to what you really have.

MacBookPro Lion crash, loading during restart after failed updates.

During a restart phase after software updates (IPhoto, ITunes etc)my MacBookPro_Lion is not restarting anymore...just loading without reach login page. Was switched off due to low battery during restart phase after updates downloads. How can I solve it?
Thanks.

Boot into your Recovery partition (if you can) by holding down the command and R keys whilst booting. Once there elect to resinatll the OS (you may need your Apple ID and password for this). You'll not erase any data, etc., by installing a fresh OS.
Once your OS install is complete, you can restart and go through the update process again, this time remembering not to unplug from mains while the updates are installing.
Clinton

Can't restart after upgrading video card to a Radeon 9200

Hi All, I just purchased a Radeon 9200 AGP graphics card for my Quicksilver. I removed the old card which worked fine and installed the new card. As soon as I pushed the new card into the AGP slot the computer turned on and it started to start up. Then a rather load beep sound came through the speakers and the light on the front of the computer started to flash. I tried this a couple of times but it still will not start with the new card installed. Everything works fine with the original card.
Anybody have any suggestions?

Hi,
Welcome to the Apple Discussion Forum!
Did you purchase a regular PC version ATI 9200 video card that was 'flashed' for Mac use? Or, is it just a PC version ATI 9200.
Either way, a regular PC version won't work in a Mac, even though it fit's the AGP slot. If it's a 'flashed' card from an Ebay Seller it sounds faulty, get a refund.
ATI only offered a Mac Edition 9200 as a PCI card, not AGP. There was an ATI 9000 Mac Edition in AGP.
Regards,
Dave

Image quality of Lumia 930 dropped after Denim upd...

Oversharpened images and unnatural colours.
Please see the attached images for comparison.
Attachments:
Cyan.JPG ‏70 KB
Denim.JPG ‏100 KB

It's hard to say from your samples at their reduced resolution, the visible differences could just the different light conditions at the time those two pics were taken. Personally, on the evidence presented I prefer the Denim pic.

Nokia Lumia 930 Defects or Firmware Issues

I recently upgraded to a Nokia Lumia 930, I had a 920 for ages and loved it. However, I had to replace my first 930 within two days as there was a hardware issue with one of the back buttons not working (when the phone heated up the back button would start pressing itself and get stuck sometimes).
I've had the new Lumia 930 (the replaced one) for two months now and the following problems have come to my attention:
Double tap to wake goes through phases where it just does not work. I've tried pressing down on the top right corner to see if it rectifies the problem but it does not (not sure how double tap to wake uses the proximity sensor, is this not dependant on the display). I do however have seen that double tap to wake stops working after charging the phone (I'm able to reproduce the behaviour repeatedly)? It will after a few hours of work just magically return to normal?
Proximity sensor goes through stages where it does not work either. I can't for certain say this happens after every charge but maybe it's just a coincidence that this happened after my last charge.
Some notification sounds do not sound at all, it seems to only happen when the display is turned off (or when the device is in standby?). Notifications including sounds such as locking and unlocking the phone aren't always played.
The screen does not turn on sometimes when and if a notification comes through (they do not always sound as in point 3 above).
Hey Cortana performance is terrible, it just doesn't work if the phone is not unlocked.
Gestures Beta has never worked on my Lumia 930, albeit a beta, I never have had any problems with it on my Lumia 920.
Things I consider to be the culprit:
There are so many issues with my device while it is in standby, that it seems to me that it might be a firmware problem? I can't image how being in low power mode would affect the device sensors (unless there is some kind of voltage drop in standby and the device's sensors are unable to function). Unsure why it seems to be fine when the device is unlocked.
I can't explain what charging does to double tap to wake, but the fact that this happens after every charge leads me to believe there is something here.
Things I have tried:
Pressing right hand corner of screen for double tap to wake. Did not help (also saw somebody going on about the phone bending in another post, my device is in a hard cover and the 930 has Gorilla glass 3, not sure it will bend at all).
Hard reset and reload firmware. Did not help (Currently running Denim).
Anyone experiencing the same problems and any solutions? I came here after being directed by Microsoft Mobile's facebook page. They don't seems to think posting my problems on facebook is a good idea. Honestly, this is my second Lumia 930 and after reading up on all the issues with the double tap to wake have a came to one conclusion: The build quality of this device is terrible.
Thank you for your time.
Jaco

Here's an update.
In frustration I tried pressing harder in the right hand corner, and if course that solves the issues (Lovely design flaw this). Although only temporarily and I still don't know how the charging is capable of affecting this at all.
My suggestion to Microsoft would be to allow in the next firmware update to allow users to disable this sensor. It seems that this sensor (or the light sensor next to it, who knows) is used to determine if the device is allowed to "Unlock" using double tap to wake. If this is the case, the device will simply ignore it when you tap on the screen (at the cost of somehow waking up in your pocket, a small price to pay)?
Anyhow, anyone's take on this?

Nokia Lumia 930 - random restarts - comes back eve...

Hi,
My Nokia Lumia 930 has a problem with random restarts, the problem occurs randomly, and I can go for a few days without restarts, and then suddently it will restart several times within an hour.
I have tried to reboot the phone, and I have reset it to default several times, but the problem returns.
Software is:
Lumia Denim
Firmware Update Notifier 1.2.12.1
Glance PinBoards App Agent 1.3.1.7
Lumia First Use Experience 1.11.2.1
Lumia Share 2.5.1.0
Rate Us 2.8.0.0
Silent Installer 1.6.0.6
SIM Unlock 1.0.0.5
SMS vCard Receiver 1.2.1.7
SpamFilter 1.9.3.1
Ram: 2 GB
Manufacturer Name: RM-1045_1006
Mobile Operator: 000-33
Configuration Id: 1006.01B8E5
Core Build ID: 9031.16 (02540.00019.15053.26000)
IMEI-SV: ...................................
BSP Release: 2540.0019
Active Customer Configuration: 11841
Master Configuration Label: 14w51_1
Preloaded Content Label: 14w51_1
Application Version: 3.14.7.4
Build Creation Date: 02-02-2015
Model: RM-1045
OS Version: 8.10.14234.375
Firmware Version: 02540.00019.15053.26004
Hardware Version: 2.0.0.0
Radiosoftware Version: 201c110.00039.0001
Chip-SOC version: 8974
Is it possible to extract som logs, to analyze what is going on?
I have had 2-3 restarts today, and the same yesterday.
I intendedly did not reset to default, as it is a long process and not a fun thing to do every second month - please if anyone can help to solve this problem, I really hope, because I would like to keep Windows Phone, but if this is not resolved, I will find something else (My previous Lumia 920 had the same problem).
I can live with the short battery life so far, but the restarting problem is a huge problem for me.
Best Regards,
Brian

The remaining DIY option for you is to try the Windows Phone Recovery Tool. That will completely wipe your phone and perform a clean install of the firmware, so you need to back up beforehand. Failing that, the next step would be submitting the handset to a Nokia Care facility to be checked / repaired. AFAIK there are no consumer tools available to extract logs from the handset.

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!

Thanks clintonfrombirmingham...
After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
Have you thought about turning auto syncing off?
Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

Failed to upload Videos to Youtube and Facebook

Failed to upload Videos to Youtube and Facebook
Tried 2 videos. Both in portrait, bothe under 10 seconds in legth.
They have a mp4 extension. using the share button cannot upload to facebook or youtube. Tried 3 different WIFI locations and LTE.
Anyone else?

I am recording the video on my Z10 and pressing the share button. I choose facebook or youtube and fill in the appropiate information. Both accounts are logged in correctly. Both fail immediatly (I get a notification in the HUB)

Calendar Portlet Will Fail Restarting After July 28, 2005

Hi,
We have an Oracle 8i database sitting on a UNIX server. On July 28th 2005, our entire database crashed with no UNIX processes able to run. We found that the cause was due to the Java Cryptography Extension (JCE) 1.2.1 that ships with OCS 9.0.4.x makes use of a certificate that expires on July 28, 2005. On or after July 28, 2005
the Calendar Portlet will no longer be able to use JCE 1.2.1. and will error with 500 error.
The workaround we did was to replace the following JCE1.2.1 files with the corresponding files from the JCE 1.2.2 package and then re-boot the UNIX server:-
US_export_policy.jar
jce1_2_1.jar
local_policy.jar
sunjce_provider.jar
We have been told by out DBAs that although it occurred within the Oracle Collaboration Suite, it is actually a Sun Java problem.
Therefore, despite putting this workaround in place, is anyone able to advise if this problem will occur again in the future? Is the workaround sufficient?
Many Thanks.
Full description of problem and workaround is below...
CALENDAR PORTLET WILL FAIL RESTARTING AFTER JULY 28, 2005
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle Collaboration Suite - Version: 9.0.4.x
Platforms Affected
~~~~~~~~~~~~~~~~~~
GENERIC
Description
~~~~~~~~~~~
The Java Cryptography Extension (JCE) 1.2.1 that ships with OCS 9.0.4.x makes
use of a certificate that expires on July 28, 2005. On or after July 28, 2005
the Calendar Portlet will no longer be able to use JCE 1.2.1. and will error
with 500 error.
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Every OCS installation will run into issues with the Calendar Portlet after
July 28, 2005. This will only occur the next time they bounce OC4J components
after July 28, 2005.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The Calendar Portlet fails with 500 error after July 28, 2005.
The following stack trace will be seen in the application log:
$ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/webclient-calendar/OC4J_Portal_default_island_1/application.log
====STACK TRACE =====
05/07/28 9:01 webclient-calendar-web: Servlet error java.lang.ExceptionInInitializerError: java.lang.SecurityException: Cannot set up certs for trusted CAs
at javax.crypto.b.<clinit>([DashoPro-V1.2-120198])
at javax.crypto.SecretKeyFactory.getInstance([DashoPro-V1.2-120198])
at oracle.calendar.authentication.OTMT.initEncryption(OTMT.java:240)
at oracle.calendar.authentication.OTMT.<init>(OTMT.java:150)
at portlets.Calendar.getOTMT(_Calendar.java:110)
at portlets.Calendar.doSearch(_Calendar.java:313)
at portlets.Calendar._jspService(_Calendar.java:528)
at com.orionserver[Oracle9iAS (9.0.2.3) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
... remaining of stack trace truncated ...
And NoClassDefFoundError with the following stack is raised
if reloading the web browser after the error occured.
05/07/28 9:02 webclient-calendar-web: Servlet error
java.lang.NoClassDefFoundError
at javax.crypto.SecretKeyFactory.getInstance([DashoPro-V1.2-120198])
at oracle.calendar.authentication.OTMT.initEncryption(OTMT.java:240)
at oracle.calendar.authentication.OTMT.<init>(OTMT.java:150)
at portlets.Calendar.getOTMT(_Calendar.java:110)
at portlets.Calendar.doSearch(_Calendar.java:313)
at portlets.Calendar._jspService(_Calendar.java:528)
at com.orionserver[Oracle9iAS (9.0.2.3) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
... remaining of stack trace truncated ...
Workaround
~~~~~~~~~~
The workaround is as follows:
1- Download the JCE 1.2.2 package from the following web page:
http://java.sun.com/products/jce/index-122.html
2- Remove the following files from the midtier:
$ORACLE_HOME/jdk/jre/lib/ext/US_export_policy.jar
$ORACLE_HOME/jdk/jre/lib/ext/jce1_2_1.jar
$ORACLE_HOME/jdk/jre/lib/ext/local_policy.jar
$ORACLE_HOME/jdk/jre/lib/ext/sunjce_provider.jar
3- Copy the following files from the JCE 1.2.2 package to the
directory $ORACLE_HOME/jdk/jre/lib/ext/ :
jce1.2.2/lib/US_export_policy.jar
jce1.2.2/lib/jce1_2_2.jar
jce1.2.2/lib/local_policy.jar
jce1.2.2/lib/sunjce_provider.jar
4- Complete by issuing opmnctl stopall , opmnctl startall on the middle tier and
test the Calendar Portlet again. Calendar Portlet should now work with the
system date set to past July 28, 2005.
Patches
~~~~~~~
List the known patche(s).
References
~~~~~~~~~~
Bug 4452391 Calendar Portlet Authentication Certification (Jce) Expiring July 28th 2005

I was unable to access the laptop last night to create a new user; however my client would perfer not to try a second account since that would make it unusable for him while we test the second profile.
Also John Sophos was installed after this started to verify that it was not a virus/malware (I know pointless step but it has happened to me before) so I don't think that is the problem

Lumia 930 restarts after failed video upload to FB

Similar Messages

Maybe you are looking for