Lumia 930 won't detect LTE

Hello
I'm on Rogers network in Canada. It says they use the 2600 mhz range or band 7. Do all Lumia 930 support this range. Currently my phone only shows the 4g symbol, not LTE.
Any suggestions?
Thanks
V
Nokia 3395
Nokia 6600
Nokia N95 8GB
Nokia N8 (Anna)
Nokia Lumia 930

Hello,
I checked - it is 4g/LTE enabled.  Called the carrier to make sure the SIM is correctly enabled - and it is.
Tried flipping between automatic and specifying a network - no difference.  
I am getting speeds of about highs about about 18 Mbps Up and Down, when I see the 4G signal.
On wifi - lower (which makes sense as it is lower).
I am not sure if it ever should say LTE on the screen.
I attached a screenshots - hope it helps.
thanks for your time and effort!!!
Nokia 3395
Nokia 6600
Nokia N95 8GB
Nokia N8 (Anna)
Nokia Lumia 930
Attachments:
Lumia9304g.jpg ‏143 KB
Lumia930speed.png ‏954 KB
Lumia9304gmain.png ‏1158 KB

Similar Messages

  • Does Lumia 930 support LTE in India?

    I checked the specs of Lumia 930 @ http://www.nokia.com/in-en/phones/phone/lumia930/specifications/
    It doesn't show LTE in Data Network support.
    But, LTE support is mentioned in Nokia global website @ http://www.nokia.com/global/products/phone/lumia930/specifications/
    I am confused ...
    Are there two versions (LTE and non-LTE) of Lumia 930?
    Does Indian version of Lumia 930 support LTE?

    As per the band frequency , I think handset should have LTE 2300 for working LTE connection in India and i think Lumia 930 India specifications doesnt have it.
    Currently India has very less 4G/LTE ,though its rolling out in varying parts of the country. So if possible by software update it can be enabled but for now i think NO. Also I am not sure whether this can be enabled by a software update.
    -Thanks
    Click on "Accept as solution" if it worked for you else if it was helpful you can click on "Kudos star" below.

  • Can't connect to Eduroam on my WP 8 Nokia Lumia 930

    Hi!
    So, I just got the new Lumia 930, which I am very happy with, however I can not seem to get it to connect to Eduroam at the university I work at. When I go to the page where I am suppose to 'join' or 'download' whatever I need, 'securew2', (using the phone)
    it detects that I am using a Windown Phone, but it only just gives me settings to 'configure my device'. Such as:
    SecurityType:WPA2-Enterprise
    Encryption: AES
    EAP Type: TTLS
    Inner EAP Type: PAP
    CA Certificate: UTN-USERFirst-Hardware, AddTrust etc..
    When I then go into WiFi and click on Eduroam, I try to log in with my user-credentials. I can also look through a list of certificates but none of them seem to be the right one. The only choice I really get is the EAP-method, where I change it from PEAP
    MA-CHAP v2 (which did not work) to TTLS. Then I am asked to verify that it is the right network, which it is - with the name of the university and everything - I click OK....and then there is a full stop. I only get a 'can't connect' message. Very frustrating.
    I talked to the IT people at here, and they verified my user credentials, and told me that people with Windows Phones had trouble connecting to Eduroam. 
    As should be abundantly clear by now I am technologically challenged, so please help help help me fix this. If for no other reason then to silence my snickering, iPhone-loving colleagues. 

    Hello,
    Did you find a solution for this issue?
    I just bought a Nokia Lumia 735 and I have the same problem. Unable to connect the Eduroam network in my laboratory. It seem that I have to put an other certificate which is not on my device (from TERENA), and I did not find how to do it.
    It is a bit disappointing to be blocked on such a new device. My previous phone, an old Iphone 3gs, was able to connect very easily...
    Please help, or I will regret my choice to switch on Windows Phone (if I add the poor choice regarding the apps on the Store...).
    Regards.

  • Denim update lumia 930

    I have a lumia 930 ( mobile operator 000-ZA, RM-1045_1065 ) and its not even on the list on th official update availability page. will i get the denim update & if so, when?

    BenedictD wrote:
    Product Code: 059W1P1
    That is nothing special or wrong. That is a normal country variant. You have to wait.
    BenedictD wrote:
    MS acquiring Nokia's D&S [removes] the go between
    Microsoft Mobile has to create the firmware which is the go-between your phone and the OS. This is not going to change in future either. ‘Therefore’, some models lack behind others – Microsoft Mobile could fix this with more man power. Furthermore, Microsoft Mobile releases the firmware files in batches. ‘Therefore’, some variants lack behind others – because I am an end-user like you, and because I have not read a reason for this batching, I do not know how to solve that. Anyway, there is no need to bully your phone, it won’t get faster. Your phone notifies you automatically, when the update is available for your model, type, and variant (which is codified via the Product Code).

  • Camera focus problems - Lumia 930

    Anyone able to help me please?
    I've got my gorgeous new Lumia 930 but I've noticed I'm having problems scanning QR codes.
    The camera just won't focus on the code and so does nothing when I try and scan.
    I've tried a soft reset but still no joy.
    Now I've realised that the camera just won't focus at all :-(
    Anyone any ideas before I send it back???!!
    Thanks!

    camera won't focus even when using the camera normally for taking photos? check that you are up to date with the latest firmware for your device along with the latest Nokia system app updates from the Store, and try performing a soft reset. also try uninstalling then reinstalling Nokia Camera from the Store.

  • Is there going to be a 64Gb Lumia 930

    With the 20Mpx camera on the 930 and no SDcard expansion, this really is a needed option to compete with the iPhone. With all the music I want available offline (at lowest bitrate) plus the apps and games, I am nearly out of memory on my 32Gb 920. Please consider adding this to the range.
    Solved!
    Go to Solution.

    32Gb is just not enough. The Lumia flagship should have been offered with either 32Gb, 64Gb or 128Gb (like the iPhone 6 !). An SD slot would also have been a big plus (on the same face as the SIM card slot). I don't buy that the design of the Lumia 930 did not allow this intetegration.
    The reason larger memory is important for me is for music and films during flights and while sailing when there is poor or no One Drive connectivity.
    I've been using the same iPhone 4 since its launch and really want to move to the Lumia with Windows 8.1 (and Windows 10 next year). But I can not purchase the Lumia 930 because it doesn't have enough storage. I would have purchased the 128Gb version even if it cost more (it probably still would have been less expensive than the iPhone 6 with 128 Gb).
    There is so much to like about the Lumia 930 (I won't list all the features I like, except that being able to take great photos/films is high on the list as well as the fact that it feels like a quality phone in your hand). It really is a pitty that the ability to have much higher internal storage was not designed into the phone, particularly since I suspect that this would have been relatively easy to offer compared with all the other wonderful inovations of this phone.
    I remember that when I purchased an iPhone 5 for my son last year, everyone in my queue purchased the highest memory version of this iPhone.
    Will the Lumia 930 support Windows 10 next year ?

  • Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  What's wrong and how do I fix it?  Help!

    Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  Tried it 10 times with the same result.  What's wrong and how do I fix it?  Help!

        Oh no Mr.Ected!
    I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
    AmberF_VZW
    Follow us on Twitter @VZWSupport

  • I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

    I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions?  Please??? :-)

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • I have a PowerBook G4 with a non-functioning monitor.  It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

    I have a PowerBook G4 with a non-functioning monitor.  It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work.  It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

    There is no limit to the number of times you can re-install Office on the same computer.
    You can activate by telephone:
    The last paragraph is the relevant bit

  • Imac running Yosemite won't detect external display

    I previously was using a 2008 iMac desktop and running OS X Yosemite. I was using dual monitors (other monitor being Insignia brand) and everything worked fine. Since this was an earlier mac version, I was using the Mini DVI to VGA Adapter to connect. Last week, I got a brand new iMac (Mid 2014 version). I am running OS X Yosemite as well, but now it won't detect any displays. I'm now using the Thunderbolt cable to connect so I wonder if that has anything to do with it. But I have used that same Thunderbolt cable before on my macbook and it worked just fine.
    I've tried restarting, resetting the PRAM and everything. I don't know what else to do. Help!

    Thanks for the reply, but tried everything and it still won't work. Rebooted, installed updates, cleared PRAM, everything. It will not detect the displays at all. Maybe there is something wrong with my VGA cable.

  • I told Time Machine no and now it won't detect my external drive...

    Whenever I would plug in my external drive it would pop up with a Time Machine dialog asking if I would like to set it up for backup. I usually hit the ask me later option. Well last time I just hit no. It was starting to annoy me. Well now, when I plug in that drive, it won't detect it or pop up on the desktop. It works on my laptop. How the heck do I get it back?! I have files I really need to transfer!
    I would appreciate any info you can give. My i7 is my first Mac in 10 years and I am a bit lost.

    As far as I know the drive should still appear as an icon on your Desktop even if you turned down Time Machine's request to use it as the TM backup drive. What's on the external drive right now? Is it just stuff that you dragged and dropped onto it for backup? But if you've used it as a Time Machine backup on your laptop then maybe that's part of the reason you're having difficulty getting it to show up.
    P.S. If you want TM to ask you again if you want to use this external drive as a TM backup, go to Applications and open Time Machine and then go to Time Machine preferences and make the selection you desire.
    Regards,
    Steve M.
    Message was edited by: Steve M.

  • MacBook won't detect Toshiba 1T external hard drive

    I just upgraded my operating system on my MacBook Pro and now my laptop won't detect my Toshiba 1T external hard drive, even though I've been using it before.  Any ideas?

    Adam513, turned out the latest operating system doesn't read Microsoft formatted external hard drives the way it used to.  I had to purchase a new external hard drive, them find an apple computer with an older version operating system so I could transfer my files to the new external which is formatted for Mac.  The new external works fine and once I have all the files transferred, I'll reformat my old external hard drive.  Took me and the guy at the Genius Bar a while, but we finally figured this out.  Hope this helps!

  • My computer won't detect my ipod 4g when it is plugged in and it won't sync with itunes, what should I do???

    My computer won't detect my ipod 4g when it is plugged in and it won't sync with itunes, what should I do???

    Did you already try the troubleshooting mentioned in this article? iOS: Device not recognized in iTunes for Windows

  • HELP - My new Nokia Lumia 620 won't boot up, even ...

    I'm worried my Nokia Lumia 620 is a lemon, and the Care Centre will just keep taking it in for repair.  The reliability so far has been disappointing, especially as I was giving Nokia a try after a 10 year break, and also trying out Windows Mobile / Phone after a 6 year break.  I want to recommend it - I'm continually being asked by friends and colleagues what I think of my new phone.   Nokia will be smart to just replace it.      
    The details: my Nokia Lumia 620 won't boot up today (again).  It hung on boot  this morning with the Nokia Logo.  That was over 2 hours ago.  It had this problem during February, and I returned it twice for repair to the local Nokia Care Centre.  I guess I'll take it in again later today, but it just feels like a lemon handset so far.
    Timeline:
    Handset purchased in local Nokia Store on Jan 29 2013 ( 7 weeks ago)
    Handset gave "Exclamation-Mark-Screen-of-Death" on Feb 19 2013 (3 weeks old handset)
    Local Nokia Store sent me to local Nokia Care Centre, handed in overnight "for repair"
    Phone returned on Feb-20-2013 after software refresh. 
    Worked fine for 1 week.   Problem returned Feb 26 2013. (4 week old handset)
    Nokia Care Centre "replaced motherboard" on Feb 27 2013. 
    Has worked fine for 3 weeks.   Now Lumia 620 won't boot this morning - no Exclamation Mark, instead it's the Nokia Logo on boot.  
    The handset is 7 weeks old.
    Hard reset (side-button-combination) hasn't worked either.  
    Any advice on getting this working, repaired or replaced?

       Update on the repair - it didn't work.   I returned the phone to the Yau Ma Tei Nokia Care Centre on March 20th, and was given what was termed a 'replacement' phone.   I was pretty happy.  All was well.  But two days later when I tried to make a phone call using my headphones, I noticed that only the left audio channel was working through the earphones.   I tried a second pair of earphones and the same problem.    The audio was only working through the left channel.  On a new phone.  How strange.  
    So was it really new?   My suspicion is that the repair centre has used old returned parts (parts they perhaps term as refurbished) - so in fact my replacement phone is my old phone assembled with old and refurbished parts.   Was it in fact a refurbished phone assembled from refurbished parts?   Frustrating when they tell me it's a replacement phone.  
    That was back in late March.  I posted a couple of tweets and Nokia responded.  They even phoned me to try and help.  However no offer of a new phone.  All they suggested was that I revisit the Nokia Service Centre.   For a 4th time.   
    That was about 6 weeks ago, and I simply haven't made the time to go to the Service Centre again.   It's hard to find the time when my last 3 visits have been so unsuccessful.
     Sometimes you just get a lemon.   It happened to me once before with a different manufacturer when I was on a contract and had to live with a phone for 2 years that kept cutting out during calls.   Same problem - the manufacturer attempted to repair it, but it just never worked properly.   That was 10 years ago.  Now it's happening with my new Nokia.  Luckily I'm not on contract this time.  I've read good reviews for the Lumia 620, and overall it's a pretty decent handset in every other way.  
    But the issues this particular handset has been plagued with has overshadowed any positive feelings I have been having.   I'll probably be cutting my losses and changing handsets in the summer.  

  • 10.5.8 won't detect any external hard drives

    I want to update my 10.5.8 Macbook Pro which I bought in 2008.  It runs incredibly slow, and I want to reformat it before updating with Snow Leopard.  The problem is that my computer won't detect any external disc drives, so I can't back up my important files.  Is there any way to fix this, or is there something I'm missing?
    I'm also wondering if I'll be able to reformat without my original OSX install disc that came with my computer, and if so, how?  Thanks in advance.

    If you are going to be upgrading to OS X Snow Leopard, the installer for that should be able to format your drive for you before you do the installation.  I'm assuming that you have those CD's for your computer as you need discs to be able to ugrade to Snow Leopard.  What happens when you plug in an external drive?  Does it just not recognize the drive, or do you just not have it selected to show the drive on your desktop?  With Finder being the top window, click on the Finder Menu and select preferences > select general in the tabs at the top and then make sure that External discs is checked.

Maybe you are looking for

  • Send a Report as attachment by Email

    Hello, I'm a rookie in Apex. I read a lot of thread based on how to send a email from an Application. it seems easy to create the body of the email with a SELECT query. I'm using APEX_MAIL.SEND(). I would like to now if it's possible to send a report

  • How do i store records temporarily

    hi, i am fetching some rows from my database in the java program. after fetching the records i have to process each row.where do i storethe records temporarily so that i can reuse them later in my program.in oracle this is done by using cursors,what

  • Manifest attribute Class-Path

    Hi !! I can't get the Class-Path attribute to function properbly, what i'm trying to do is to include all the jar files my application uses, in one jar file. Where the resources is specified in the Class-Path attribute. But the Classloader, can't fin

  • Yosemite has made my MacBook unbearably slow

    Hi there, Like other Mac users I have found my MacBook Pro has become so slow it is virtually unusable since installing Yosemite.  I installed it several days ago and the problem has not resolved.  I have run EtreCheck in the hope that someone might

  • Font.lineThroughPeriod

    Anyone know if font.lineThrough and font.lineThroughPeriod is broken in LCD 9, Acrobat 9? I have a check box in a row, and if checked I'd like the data in the row to have a strikethrough.  Even in "simple testing" where I set up a simple textfield an