Lumina 1020 Video Out Help

I love the phone, but it always seems I am getting jacked by MS, I have the Surface RT, several HTC phones that the carrier wont upgrade from WP7... so I am pretty fustrated with MS... Now my iPhone I can mirror image it to display on anything with a video input via the lightning to HDMI and from there a cruz interface adapter. I need the ability to do that from this Lumina 1020.
if it could output to HDMI or to a basic video cable either would work,
I heard hooked up to a PC running an app ,which doesnt work for me, that it will... I dont have that ability on a TV
Thanks

I hope it is not overlooked, I hate to say it, but 1.) the iPhone can do it both ways, plus has Aplle TV, and a host apps to take it on the road, in the car, and in the home...This was supposed to be better than the iPhone 2.) I still have time to return it and getthe iPhone which I might do, as SIRI does what Cortana does... I just hate the idea that I switched carriers to AT&T from Tmobile which I kind of liked.
There has to be a solution though, the output should be a digital LVDS signal that can/should be able to be manupulated due to the touch panel and display sharing a common chip
Or maybe Nokia techs aren't up to what Apple is j/k ... is there a way to get to a Nokia engineer, not someone who reads off a script ?
Thanks

Similar Messages

Video-in video out - HELP

guys, i have a graphics card that supports video in and video out. i've have done several things already with the video in function, but i haven't had any luck of displaying on TV what my PC sees.
i've tried several things including updating and reverting video drivers, but no progress at all. all i see is a black screen.
what is the problem with this???
please help....

Hi there,
I posted an answer for you in the other thread...
You can see it HERE .
Cheers!

I need to connect I-Mac G5 to HDMI TV, I think I need this: Video Out: mini-VGA (mirror only) to HDMI, where can I buy? Apple Bluewater no help.

I need to connect I-Mac G5 to HDMI TV, I think I need this: Video Out: mini-VGA (mirror only) to HDMI, where can I buy? Apple Bluewater no help.

VGA is an analog signal HDMI is digital. A simple cable would not work you would need something that converts the analog signal to digital.
A search of VGA to HDMI turned up a few possibilities but nothing specific. In any case the picture on the TV will not be very good given the source.
You should check to see if the TV has a VGA input. Some TV's have a computer connection port and this is usually VGA.
Message was edited by: Frank Caggiano - I'll ask the hosts to move this to the proper community.

No Documentation Need Help/Video Out/In

I purchased an MSI Machine from a local distributor and they failed to give me any doocumentation. I've spent much time and anguish gathering the info. (Specs Below)
I'm trying to get video out to TV and hopefully Video in also. But I don't know what I'm doing. I was able to get ahold of the proper drivers and some MSI Software such as the NVIDIA nView Desktop Manager that I think was supplied with the MSI Driver. I can Use two Monitors in any array such as Clone, Span, Dual View and Single but I cant output to my TV using Clone and the TV-out + DVI. Do I need special software. I'm using Windows Media Player and some videos and my svideo cable connected to TV on Video 1. Please Help. Please Please. Thanks In Advance. Gregg
Operation System     WinXP
Mainboard Manufacturer    MSI
Mainboard Model Name    MS-6728
Mainboard BIOS Vendor    AMIBIOS
Mainboard BIOS Version    3.70
VGA Card Information
VGA Card Model Number FX5700LE-TD128
VGA Card Manufacturer    MSI
VGA Card Model Name    MS-8959
VGA Card Driver Version    6121
VGA Card BIOS Vendor    NVIDIA
VGA Card BIOS Version    4.36.20.30.10
(1) OSD Model Name    MS-8216S (ATAPI DVD-ROM 16XMax )
(1) OSD Chipset Vendor    MediaTek
(1) OSD Firmware Version    1.30
(2) OSD Model Name    MS-8408A (ATAPI DVD RW 8XMax )
(2) OSD Chipset Vendor    SANYO
(2) OSD Firmware Version    1.50

Welcome to the forum!
Try one of these. You need to install the drivers in compatibility mode
ATI Display Driver (Vista)
ATI Display Driver (XP)
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Help, HD Video Out From Timeline? How?

Hi
What is the Solution for play out footage from the timeline in Final Cut Pro HD-Video out to a HD LCD Monitor? Canopus has no solution, and I was looking at the Aja hardware also. I need HDMI out I think ? Your thoughts on what works? Thanks, Tim C.
What Card is reasonable? or What converter needed? Blackmagic Card possibly?

most of the cards are HD SDI out on BNC connectors. blackmagic makes a box called HD link that allows an HD SDI signal to be mapped 1:1 pixel wise to either DVI-D or HDMI. Your monitor will need to be 1920 x 1080+ for it to work. It Appears you will need both the card and the adapter. I'm using a Kona2 and the hdlink for the client monitor and it works fine. I use a real HD mon for critical evaluation. the info re this adapter and recommended monitors is here http://www.blackmagic-design.com/products/hdlink/
G5 dual2gig Mac OS X (10.4.4) xraid array,kona2, HD and SD decks
G5 dual2gig Mac OS X (10.4.4) xraid array,kona2, HD and SD decks

Video out, dvi, apple vga? , help me

i ahve a pb g4 12" 867mhz,
i want to buy a video out cable, but i notice that my port is different from several friends who have the 1.0ghz model g4 12",
can someone link me to a website with what i need?
or am i even able to buy the older cable?
thanks,

This Apple mini-DVI to Video adapter should work for you.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=7E4 EB91E&nplm=M9319G/A
It has an S-Video connector and a Yellow RCA composite video connector on it. With these 2, you should be able to hook up to any tv.
-Andrew

Nokia Lumina 1020 New update feature help

Hi There,
My Lumina 1020 updated to windows 8.1 yesterday and i've realised that when my phone is locked and is just a black screen showing the time that it no longer shows a little notification when i have a text, a email or missed call.
I have looked at the settings and it says show notifcations banners but this doesn't work.
Does anyone know how to get this back on as i have to physically unlock the phone and look to see if i have any.
Regards and thanks in advance
Rob
Solved!
Go to Solution.

First make sure that all your system apps are up to date, you can use a free app like Lumia System Updater or similar to check that.
Then check your settings under Settings > Lock Screen > Choose apps to show quick status and also Settings > Glance > Glance Screen info > lock screen notifications
And finally, it's Lumia, not LumiNa.

I unintentionally deleted the first segment of some video. I was able to get it out of the Trash and into "Finder", but I cannot restore it to iMovie and the original video. Help! How do I move the video (now in Finder) back to iMovie?

I deleted (to Trash) a segment of "raw footage" from an iMovie project that I did not want to delete.
I was able to retreive it from the Trash and move it to Finder, but I cannot figure out how to move it back to iMovie.
How do I do this (restore the video segment to the start of the project)?
Or, do I have to load the original video again from the camera?

@ "Afterimages":
Well, yes, I suppose I could re-import the video. (LIkely ALL of it, dammit!)
So, unless I'm mistaken that would be the "long way" to resolving this issue.
I was able the take the deleted video out of the Trash and now it's in Finder. Why can't I simply re-insert it into iMovie where it orginally was? That would be the simple solution, just "click and drag", or something like that, correct? Maybe that's impossible? (In which case, I must ask, "Wouldn't the creators of iMovie have considered this "boo-boo" and done something to remedy it easily?" I doubt I'm the first vidiot to do this...

Video-out Monochrome

I've looked around the forums for this problem and found something similar, but don't know how to solve it.
I'm connecting my video-out on my graphics card to my line in for the TV.
Anyways, the picture comes up black and white on the TV and I've tried messing around with every little thing that everyone suggested, but it doesn't work still.
The S-Video connection on the graphics card is only a 4 pin, not an 8 or 9 pin as other people have suggested that might be the problem...
Any help to get this to color would be greatly appreciated.

Does your video card have a composite video output (usually a yellow RCA socket), or only the 4-pin S-Video socket?
If it only has the S-Video (aka Y/C) socket, and your TV only has Composite input, you either need a special cable that combines the Colour (C) signal with the Luminance (Y) signal, or (possibly) you need to tell your video csrd to output composite video on the Y signal.
Of course, if your TV has an S-Video input, then it should work with a standard S-Video cable. If the TV has a SCART input (23 pin connector) it gets more complicated, as the SCART connector allows for Composite, S-Video or even RGB connections on the one connector, but your TV might only support composite. If you do have a SCART connection, you could connect a 470 picofarad capacitor between pins 15 and 20 to add the C signal (pin 15) to the Y (pin 20). But from what I can gather, SCART connectors are more common on European TVs (PAL) than in NTSC countries.
Hope this helps.

MSI GeForce 3 Ti200 video out freezes

Hi!
I was testing the composite video and s-video out connectors. In my properties for the GeForce card i can choose between s-video and composite video, but they aren't automatically discovered as connected when pressing that button.
However when i press apply after choosing composite video, my monitor goes black, but i get no signal to my TV. My computer totally stops responding not even ctrl+alt+del will help. I have to press the reset button.
I downloaded TV-tool which i saw someone mentioned in this forum. It works flawlessly using TV tool using composite video(it takes sometime to switch between the monitor and tv but it works).
So as i understand it MSI's drivers or tool for switching between Monitor/video is broken. I have downloaded the latest drivers and tolls with MSI Live update 3, but it still doesn't work.
I'll be damned if i have to purchase a third party product for something that should work out of the box. I mailed MSI support about this and was directed to this forum, so i wonder if anybody else has this problem and found another solution than TV-tool?
I'm running Windows XP with the latest drivers.
Mats

Judging from the problems I and several other people on the forum have mentioned, there seems to be a problem with the nVidia 45.23 drivers and video. I get a grey screen with vids unless i turn down the hardware accel to almost nothing. Other people can get vid to show on their tv out. So if you havn't tried an older driver version yet, maybe you could use the good old xp driver rollback in the video device properties.

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

How can I determine the type of video out connector I need?

Howdy,
I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
Thanks for any help,
Zebulon T

Thanks, Ded,
You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
Thanks very much.
Zeb T

Video out from MacBook Pro to HDTV - no solution?

I've had this problem for over a year now and nobody has been able to help me solve it, not even the Apple guys. I need to get the video out from my MacBook Pro (Mini DisplayPort) to my HDTV which is an older model which only has Y/Pb/Pr analogue video inputs. Does anyone know which connectors I can use in order to get 1080i on my TV? My thoughts were MDP to VGA first so that we get an analogue signal, and then VGA to Y/Pb/Pr? Would this work? Why/why not? Please help!!!

See whether this sounds like it might be the answer:
http://www.startech.com/item-features/VGA2NTSCPRO-High-Resolution-PC-VGA-to-TV-C onverter-with-Remote-Control.aspx
Don't hesitate to call Startech's tech support people to check on its suitability for your purposes.

MacBook video out not working

Hi there
I bought the mini-dvi to s-video/composite output to connect my MacBook up to a TV while away from home (to watch TV and movies) but it doesn't work. First I suspected the old TV, but works OK with the Wii connected. Then I thought it was the cable, but I tried a new cable and the sound works fine, so that's not it. Then I suspected the adapter, but when I got home I connected it to my wife's MacBook and it worked fine.
So, looks like I have dodgy graphics card hardware?
The MacBook detects that the adapter is connected, so some of the pins are working OK. I just can't get a signal from my MacBook to the TV and the auto detect does not work.
Anyone got any ideas? The computer is no longer under warranty and I don't have time to take it to the dealer (it takes them three weeks to turn around a fault!) so I'm guessing that I'll have to open up the device myself and check for some bad connections?
Any advice is appreciated!
Regards... Jonny.

Video out under 10.5.2 works fine for me and for a colleague of mine with a more recent MacBook Pro. I'd wager it's a problem with your Leopard install, not a universal one.
Also, FYI, Apple doesn't read these forums; they're just for user-to-user help. If you want to leave MacBook Pro feedback for Apple, do so here:
http://www.apple.com/feedback/macbookpro.html
But again, I do not believe yours is a universal issue. We'll be happy to help troubleshoot though. What do you mean the image is "unstable"? Could you take a digital photograph of the external monitor's screen and upload it somewhere?

Lumina 1020 Video Out Help

Similar Messages

Maybe you are looking for